summaryrefslogtreecommitdiffstats
path: root/qemu-common.h
Commit message (Collapse)AuthorAgeFilesLines
* block: Enable qemu_open/close to work with fd setsCorey Bryant2012-08-151-0/+1
| | | | | | | | | | | When qemu_open is passed a filename of the "/dev/fdset/nnn" format (where nnn is the fdset ID), an fd with matching access mode flags will be searched for within the specified monitor fd set. If the fd is found, a dup of the fd will be returned from qemu_open. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* block: Convert close calls to qemu_closeCorey Bryant2012-08-151-0/+1
| | | | | | | | This patch converts all block layer close calls, that correspond to qemu_open calls, to qemu_close. Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Merge remote-tracking branch 'quintela/migration-next-20120808' into stagingAnthony Liguori2012-08-131-0/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * quintela/migration-next-20120808: Restart optimization on stage3 update version Add XBZRLE statistics Add migration accounting for normal and duplicate pages Change total_time to total-time in MigrationStats Add migrate_set_cache_size command Add XBZRLE to ram_save_block and ram_save_live Add xbzrle_encode_buffer and xbzrle_decode_buffer functions Add uleb encoding/decoding functions Add cache handling functions Add XBZRLE documentation Add migrate-set-capabilities Add migration capabilities
| * Add uleb encoding/decoding functionsOrit Wasserman2012-08-081-0/+8
| | | | | | | | | | | | | | | | | | Implement Unsigned Little Endian Base 128. Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
| * Add cache handling functionsOrit Wasserman2012-08-081-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Add MRU page cache mechanism. The page are accessed by their address. Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: Petter Svard <petters@cs.umu.se> Signed-off-by: Aidan Shribman <aidan.shribman@sap.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
* | iscsi: Pick default initiator-name based on the name of the VMRonnie Sahlberg2012-08-091-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the iscsi layer to automatically pick a 'unique' initiator-name based on the name of the vm in case the user has not set an explicit iqn-name to use. Create a new function qemu_get_vm_name() that returns the name of the VM, if specified. This way we can thus create default names to use as the initiator name based on the guest session. If the VM is not named via the '-name' command line argument, the iscsi initiator-name used wiull simply be iqn.2008-11.org.linux-kvm If a name for the VM was specified with the '-name' option, iscsi will use a default initiatorname of iqn.2008-11.org.linux-kvm:<name> These names are just the default iscsi initiator name that qemu will generate/use only when the user has not set an explicit initiator name via the commandlines or config files. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
* Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori2012-08-031-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * stefanha/net: net: add the support for -netdev socket, listen net: fix the coding style hub: add the support for hub own flow control net: determine if packets can be sent before net queue deliver packets net: cleanup deliver/deliver_iov func pointers net: Make "info network" output more readable info net: Rename qemu_del_vlan_client() to qemu_del_net_client() net: Rename vc local variables to nc net: Rename VLANClientState to NetClientState net: Rename non_vlan_clients to net_clients net: Remove VLANState net: Remove vlan code from net.c net: Convert qdev_prop_vlan to peer with hub net: Drop vlan argument to qemu_new_net_client() hub: Check that hubs are configured correctly net: Look up 'vlan' net clients using hubs net: Use hubs for the vlan feature net: Add a hub net client net: Add interface to bridge when SIOCBRADDIF isn't available
| * net: Rename VLANClientState to NetClientStateStefan Hajnoczi2012-08-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
| * net: Remove VLANStateStefan Hajnoczi2012-08-011-1/+0
| | | | | | | | | | | | | | | | VLANState is no longer used and can be removed. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
* | Support 'help' as a synonym for '?' in command line optionsPeter Maydell2012-08-021-0/+18
|/ | | | | | | | | | | | | | | | | | | | | | | | | | For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* cutils: add strpadcpy()Dmitry Fleytman2012-07-261-0/+1
| | | | | | Signed-off-by: Yan Vugenfirer <yan@ravellosystems.com> Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* cpus.c: Make all_cpu_threads_idle() staticPeter Maydell2012-07-211-1/+0
| | | | | | | | | Commit 946fb27c1 moved all the uses of all_cpu_threads_idle() into cpus.c. This means we can mark the function 'static' (again), if we shuffle it a bit earlier in the source file. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* Merge remote-tracking branch 'mjt/mjt-iov2' into stagingAnthony Liguori2012-07-091-31/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * mjt/mjt-iov2: rewrite iov_send_recv() and move it to iov.c cleanup qemu_co_sendv(), qemu_co_recvv() and friends export iov_send_recv() and use it in iov_send() and iov_recv() rename qemu_sendv to iov_send, change proto and move declarations to iov.h change qemu_iovec_to_buf() to match other to,from_buf functions consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent allow qemu_iovec_from_buffer() to specify offset from which to start copying consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset() rewrite iov_* functions change iov_* function prototypes to be more appropriate virtio-serial-bus: use correct lengths in control_out() message Conflicts: tests/Makefile Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
| * cleanup qemu_co_sendv(), qemu_co_recvv() and friendsMichael Tokarev2012-06-111-20/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The same as for non-coroutine versions in previous patches: rename arguments to be more obvious, change type of arguments from int to size_t where appropriate, and use common code for send and receive paths (with one extra argument) since these are exactly the same. Use common iov_send_recv() directly. qemu_co_sendv(), qemu_co_recvv(), and qemu_co_recv() are now trivial #define's merely adding one extra arg. qemu_co_sendv() and qemu_co_recvv() callers are converted to different argument order and extra `iov_cnt' argument. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
| * rename qemu_sendv to iov_send, change proto and move declarations to iov.hMichael Tokarev2012-06-111-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename arguments and use size_t for sizes instead of int, from int qemu_sendv(int sockfd, struct iovec *iov, int len, int iov_offset) to ssize_t iov_send(int sockfd, struct iovec *iov, size_t offset, size_t bytes) The main motivation was to make it clear that length and offset are in _bytes_, not in iov elements: it was very confusing before, because all standard functions which deals with iovecs expects number of iovs, not bytes, even the fact that struct iovec has iov_len and iov_ prefix does not help. With "bytes" and "offset", especially since they're now size_t, it is much more explicit. Also change the return type to be ssize_t instead of int. This also changes it to match other iov-related functons, but not _quite_: there's still no argument indicating where iovec ends, ie, no iov_cnt parameter as used in iov_size() and friends. If will be added in subsequent patch/rewrite. All callers of qemu_sendv() and qemu_recvv() and related, like qemu_co_sendv() and qemu_co_recvv(), were checked to verify that it is safe to use unsigned datatype instead of int. Note that the order of arguments is changed to: offset and bytes (len and iov_offset) are swapped with each other. This is to make them consistent with very similar functions from qemu_iovec family, where offset always follows qiov, to mean the place in it to start from. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
| * change qemu_iovec_to_buf() to match other to,from_buf functionsMichael Tokarev2012-06-111-1/+2
| | | | | | | | | | | | | | | | It now allows specifying offset within qiov to start from and amount of bytes to copy. Actual implementation is just a call to iov_to_buf(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
| * consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistentMichael Tokarev2012-06-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qemu_iovec_concat() is currently a wrapper for qemu_iovec_copy(), use the former (with extra "0" arg) in a few places where it is used. Change skip argument of qemu_iovec_copy() from uint64_t to size_t, since size of qiov itself is size_t, so there's no way to skip larger sizes. Rename it to soffset, to make it clear that the offset is applied to src. Also change the only usage of uint64_t in hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() - all callers of it actually uses size_t too, not uint64_t. One added restriction: as for all other iovec-related functions, soffset must point inside src. Order of argumens is already good: qemu_iovec_memset(QEMUIOVector *qiov, size_t offset, int c, size_t bytes) vs: qemu_iovec_concat(QEMUIOVector *dst, QEMUIOVector *src, size_t soffset, size_t sbytes) (note soffset is after _src_ not dst, since it applies to src; for memset it applies to qiov). Note that in many places where this function is used, the previous call is qemu_iovec_reset(), which means many callers actually want copy (replacing dst content), not concat. So we may want to add a wrapper like qemu_iovec_copy() with the same arguments but which calls qemu_iovec_reset() before _concat(). Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
| * allow qemu_iovec_from_buffer() to specify offset from which to start copyingMichael Tokarev2012-06-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to qemu_iovec_memset(QEMUIOVector *qiov, size_t offset, int c, size_t bytes); the new prototype is: qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset, const void *buf, size_t bytes); The processing starts at offset bytes within qiov. This way, we may copy a bounce buffer directly to a middle of qiov. This is exactly the same function as iov_from_buf() from iov.c, so use the existing implementation and rename it to qemu_iovec_from_buf() to be shorter and to match the utility function. As with utility implementation, we now assert that the offset is inside actual iovec. Nothing changed for current callers, because `offset' parameter is new. While at it, stop using "bounce-qiov" in block/qcow2.c and copy decrypted data directly from cluster_data instead of recreating a temp qiov for doing that. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
| * consolidate qemu_iovec_memset{,_skip}() into single function and use ↵Michael Tokarev2012-06-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | existing iov_memset() This patch combines two functions into one, and replaces the implementation with already existing iov_memset() from iov.c. The new prototype of qemu_iovec_memset(): size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes) It is different from former qemu_iovec_memset_skip(), and I want to make other functions to be consistent with it too: first how much to skip, second what, and 3rd how many of it. It also returns actual number of bytes filled in, which may be less than the requested `bytes' if qiov is smaller than offset+bytes, in the same way iov_memset() does. While at it, use utility function iov_memset() from iov.h in posix-aio-compat.c, where qiov was used. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* | Add MigrationParams structureIsaku Yamahata2012-06-291-0/+1
| | | | | | | | Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
* | qdev-properties: Introduce pci-host-devaddr.Anthony PERARD2012-06-211-0/+7
| | | | | | | | | | | | | | | | This new property will be used to specify a host pci device address. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* | Un-inline fdctrl_init_isa()Markus Armbruster2012-06-151-0/+1
|/ | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori2012-06-031-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * qemu-kvm/uq/master: virtio/vhost: Add support for KVM in-kernel MSI injection msix: Add msix_nr_vectors_allocated kvm: Enable use of kvm_irqchip_in_kernel in hwlib code kvm: Introduce kvm_irqchip_add/remove_irqfd kvm: Make kvm_irqchip_commit_routes an internal service kvm: Publicize kvm_irqchip_release_virq kvm: Introduce kvm_irqchip_add_msi_route kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_route msix: Introduce vector notifiers msix: Invoke msix_handle_mask_update on msix_mask_all msix: Factor out msix_get_message kvm: update vmxcap for EPT A/D, INVPCID, RDRAND, VMFUNC kvm: Enable in-kernel irqchip support by default kvm: Add support for direct MSI injections kvm: Update kernel headers kvm: x86: Wire up MSI support for in-kernel irqchip pc: Enable MSI support at APIC level kvm: Introduce basic MSI support for in-kernel irqchips Introduce MSIMessage structure kvm: Refactor KVMState::max_gsi to gsi_count
| * Introduce MSIMessage structureJan Kiszka2012-05-161-0/+1
| | | | | | | | | | | | | | | | Will be used for generating and distributing MSI messages, both in emulation mode and under KVM. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | declare ECANCELED on all machinesPaolo Bonzini2012-05-101-0/+3
|/ | | | | | | This is needed in particular on Win32. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Merge commit 'ff71f2e8cacefae99179993204172bc65e4303df' into stagingAnthony Liguori2012-04-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * commit 'ff71f2e8cacefae99179993204172bc65e4303df': (21 commits) rtl8139: do the network/host communication only in normal operating mode rtl8139: correctly check the opmode net: move compute_mcast_idx() to net.h rtl8139: support byte read to TxStatus registers rtl8139: remove unused marco rtl8139: limit transmission buffer size in c+ mode pci_regs: Add PCI_EXP_TYPE_PCIE_BRIDGE virtio-net: add DATA_VALID flag pci_bridge: upper 32 bit are long registers pci: fix bridge IO/BASE pcie: drop functionality moved to core pci: set memory type for memory behind the bridge pci: add standard bridge device slotid: add slot id capability shpc: standard hot plug controller pci_bridge: user-friendly default bus name pci: make another unused extern function static pci: don't export an internal function pci_regs: Fix value of PCI_EXP_TYPE_RC_EC. pci: Do not check if a bus exist in pci_parse_devaddr. ...
| * shpc: standard hot plug controllerMichael S. Tsirkin2012-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for SHPC interface, as defined by PCI Standard Hot-Plug Controller and Subsystem Specification, Rev 1.0 http://www.pcisig.com/specifications/conventional/pci_hot_plug/SHPC_10 Only SHPC intergrated with a PCI-to-PCI bridge is supported, SHPC integrated with a host bridge would need more work. All main SHPC features are supported: - MRL sensor - Attention button - Attention indicator - Power indicator Wake on hotplug and serr generation are stubbed out but unused as we don't have interfaces to generate these events ATM. One issue that isn't completely resolved is that qemu currently expects an "eject" interface, which SHPC does not provide: it merely removes the power to device and it's up to the user to remove the device from slot. This patch works around that by ejecting the device when power is removed and power LED goes off. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | qtest: add C version of test infrastructureAnthony Liguori2012-03-301-1/+0
| | | | | | | | | | | | | | | | | | This also includes a qtest wrapper script to make it easier to launch qtest tests directly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* | cleanup obsolete typedefJoshua Housh2012-03-191-1/+0
|/ | | | | | | | | There are no users of i2c_slave. Signed-off-by: Joshua Housh <joshua.housh@calxeda.com> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* w64: Don't redefine lseek, ftruncateStefan Weil2012-03-111-2/+6
| | | | | | | | | MinGW-w64 already defines lseek and ftruncate (and uses the 64 bit variants). The conditional compilation avoids redefinitions (which would be wrong) and compiler warnings. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Move definition of HOST_LONG_BITS to qemu-common.hStefan Weil2012-02-281-0/+9
| | | | | | | | | | Like the related macro TCG_TARGET_LONG, HOST_LONG_BITS can be determined by the C preprocessor. It is also not used in Makefiles. So there is no need to calculate it in configure, and it can be defined in qemu-common.h. Signed-off-by: Stefan Weil <sw@weilnetz.de>
* cutils: extract buffer_is_zero() from qemu-img.cStefan Hajnoczi2012-02-091-0/+2
| | | | | | | | | | | | | The qemu-img.c:is_not_zero() function checks if a buffer contains all zeroes. This function will come in handy for zero-detection in the block layer, so clean it up and move it to cutils.c. Note that the function now returns true if the buffer is all zeroes. This avoids the double-negatives (i.e. !is_not_zero()) that the old function can cause in callers. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qdev: remove print/parse methods from LostTickPolicy propertiesPaolo Bonzini2012-02-071-0/+1
| | | | | | | | Also generalize the code so that we can have more enum properties in the future. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qdev: Introduce lost tick policy propertyJan Kiszka2012-02-011-0/+7
| | | | | | | | | | | | | | | | | | | | | Potentially tick-generating timer devices will gain a common property: lock_tick_policy. It allows to encode 4 different ways how to deal with tick events the guest did not process in time: discard - ignore lost ticks (e.g. if the guest compensates for them already) delay - replay all lost ticks in a row once the guest accepts them again merge - if multiple ticks are lost, all of them are merged into one which is replayed once the guest accepts it again slew - lost ticks are gradually replayed at a higher frequency than the original tick Not all timer device will need to support all modes. However, all need to accept the configuration via this common property. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* sheepdog: move coroutine send/recv function to generic codePaolo Bonzini2011-12-221-1/+31
| | | | | | | | | | | | | | Outside coroutines, avoid busy waiting on EAGAIN by temporarily making the socket blocking. The API of qemu_recvv/qemu_sendv is slightly different from do_readv/do_writev because they do not handle coroutines. It returns the number of bytes written before encountering an EAGAIN. The specificity of yielding on EAGAIN is entirely in qemu-coroutine.c. Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* add qemu_send_full and qemu_recv_fullPaolo Bonzini2011-12-211-0/+4
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* isa: give ISABus/ISADevice to isa_create(), isa_bus_irqs() and isa_get_irq() ↵Hervé Poussineau2011-12-201-0/+1
| | | | | | | | | functions NULL is a valid bus/device, so there is no change in behaviour. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-common: add QEMU_ALIGN_DOWN() and QEMU_ALIGN_UP() macrosStefan Hajnoczi2011-12-051-0/+6
| | | | | | | | | | | | | | Add macros for aligning a number to a multiple, for example: QEMU_ALIGN_DOWN(500, 2000) = 0 QEMU_ALIGN_UP(500, 2000) = 2000 Since ALIGN_UP() is a common macro name use the QEMU_* namespace prefix. Hopefully this will protect us from included headers that leak something with a similar name. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Move filedescriptor parsing code from net.c into qemu_parse_fd()Stefan Berger2011-11-011-0/+1
| | | | | | | | | | | | Move the parsing of a filedescriptor into a common function qemu_parse_fd() so others can use it as well. Have net.c call this function. v2: - moving qemu_parse_fd into cutils.c Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* main-loop: create main-loop.cPaolo Bonzini2011-10-211-3/+0
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* main-loop: create main-loop.hPaolo Bonzini2011-10-211-30/+0
| | | | Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu-timer: move icount to cpus.cPaolo Bonzini2011-10-211-0/+4
| | | | | | | None of this is needed by tools, and most of it can even be made static inside cpus.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* core: remove qemu_service_ioFrediano Ziglio2011-09-231-3/+0
| | | | | | | | | qemu_service_io was mainly an alias to qemu_notify_event, currently used only by PPC for timer hack, so call qemu_notify_event directly. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Remove qemu_malloc/qemu_freeAnthony Liguori2011-08-201-6/+0
| | | | Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Make glib mandatory and fixup utils appropriatelyAnthony Liguori2011-08-201-0/+1
| | | | Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori2011-08-081-0/+2
|\
| * qemu: Add strtosz_suffix_unit functionJoerg Roedel2011-08-051-0/+2
| | | | | | | | | | | | | | | | | | | | This function does the same as the strtosz_suffix function except that it allows to specify the unit to which the k/M/B/T suffixes apply. This function will be used later to parse the tsc-frequency from the command-line. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | Avoid allocating TCG resources in non-TCG modeJan Kiszka2011-08-051-1/+4
|/ | | | | | | | | Do not allocate TCG-only resources like the translation buffer when running over KVM or XEN. Saves a "few" bytes in the qemu address space and is also conceptually cleaner. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Merge remote-tracking branch 'kraxel/usb.22' into stagingAnthony Liguori2011-08-041-0/+1
|\
| * move QEMUSGList typedefGerd Hoffmann2011-08-041-0/+1
| | | | | | | | | | | | | | Move the QEMUSGList typedef to qemu-common so it can easily be used. The actual struct definition stays in dma.h. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
OpenPOWER on IntegriCloud