| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the function qemu_log_try_set_file() and its users (which
are all in TCG code generation functions for various targets).
This function was added to abstract out code which was originally
written as "if (!logfile) logfile = stderr;" in order that BUG:
case code which did an unguarded "fprintf(logfile, ...)" would
not crash if debug logging was not enabled. Since those direct
uses of logfile have also been abstracted away into qemu_log()
calls which check for a NULL logfile, there is no need for the
target-* files to mess with the user's chosen logging settings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is minimalistic and just contains the basic widget infrastructure. The GUI
consists of a menu and a GtkNotebook. To start with, the notebook has its tabs
hidden which provides a UI that looks very similar to SDL with the exception of
the menu bar.
The menu bar allows a user to toggle the visibility of the tabs. Cairo is used
for rendering.
I used gtk-vnc as a reference. gtk-vnc solves the same basic problems as QEMU
since it was originally written as a remote display for QEMU. So for the most
part, the approach to rendering and keyboard handling should be pretty solid for
GTK.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-4-git-send-email-aliguori@us.ibm.com
|
|
|
|
|
|
|
|
| |
We want to expose VCs using a VteTerminal widget. We need access to provide our
own CharDriverState in order to do this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1361367806-4599-3-git-send-email-aliguori@us.ibm.com
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In case host and guest endianness differ the vga code first creates
a shared surface (using qemu_create_displaysurface_from), then goes
patch the surface format to indicate that the bytes must be swapped.
The switch to pixman broke that hack as the format patching isn't
propagated into the pixman image, so ui code using the pixman image
directly (such as vnc) uses the wrong format.
Fix that by adding a byteswap parameter to
qemu_create_displaysurface_from, so we'll use the correct format
when creating the surface (and the pixman image) and don't have
to patch the format afterwards.
[ v2: unbreak xen build ]
Cc: qemu-stable@nongnu.org
Cc: mark.cave-ayland@ilande.co.uk
Cc: agraf@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
AioHandler already has a GPollFD so we can directly use its
events/revents.
Add the int pollfds_idx field to AioContext so we can map g_poll(3)
results back to AioHandlers.
Reuse aio_dispatch() to invoke handlers after g_poll(3).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-10-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
| |
Convert iohandler_select_fill() and iohandler_select_poll() to use
GPollFD instead of rfds/wfds/xfds.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361356113-11049-7-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
| |
This variable has been removed 5 years ago in 970ac5a3082428dca91171f270dcd95d6f4b2636.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
# By Andreas Färber
# Via Andreas Färber
* afaerber/qom-cpu: (47 commits)
target-i386: Split command line parsing out of cpu_x86_register()
target-i386: Move cpu_x86_init()
target-lm32: Drop unused cpu_lm32_close() prototype
target-s390x: Drop unused cpu_s390x_close() prototype
spapr_hcall: Replace open-coded CPU loop with qemu_get_cpu()
ppce500_spin: Replace open-coded CPU loop with qemu_get_cpu()
e500: Replace open-coded loop with qemu_get_cpu()
cpu: Add CPUArchState pointer to CPUState
cputlb: Pass CPUState to cpu_unlink_tb()
cpu: Move current_tb field to CPUState
cpu: Move exit_request field to CPUState
cpu: Move running field to CPUState
cpu: Move host_tid field to CPUState
target-cris: Introduce CRISCPU subclasses
target-m68k: Pass M68kCPU to m68k_set_irq_level()
mcf_intc: Pass M68kCPU to mcf_intc_init()
mcf5206: Pass M68kCPU to mcf5206_init()
target-m68k: Return M68kCPU from cpu_m68k_init()
ppc405_uc: Pass PowerPCCPU to ppc40x_{core,chip,system}_reset()
target-xtensa: Move TCG initialization to XtensaCPU initfn
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
| |
| |
| |
| |
| |
| | |
Since it was located before breakpoints field, it needs to be reset.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
| |
| |
| |
| |
| |
| | |
Pass CPUState to cpu_exec_{start,end}() functions.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
| |
| |
| |
| |
| |
| |
| | |
Change gdbstub's cpu_index() argument to CPUState now that CPUArchState
is no longer used.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well. At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.
With gcc 4.7, we get identical code generation for x86_64. We
now get native multiplication on ia64 and s390x hosts. With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
| |
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
| |
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Both uses of ctz have already eliminated zero, and thus the difference
in edge conditions between the two routines is irrelevant.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Add function comments to the routines, documenting the corner
cases upon which we are standardizing. Fix the few instances
of non-standard coding style.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
| |
We will standardize on these names, rather than the similar routines
currently residing in qemu/bitops.h.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Rename the typedef CPULogItem and the public array cpu_log_items
to names that better reflect the fact that the qemu_log functionality
isn't restricted to TCG CPU debug logs any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
The set_cpu_log() function in cpus.c is a fairly simple wrapper
which is only called from one location. Just inline the code
into vl.c, since there is no need to indirect it via cpus.c
and the handling of the error case is more appropriate to vl.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Rename the public-facing function cpu_set_log to qemu_set_log. This
requires us to rename the internal-only qemu_set_log() to
do_qemu_set_log().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
Rename cpu_str_to_log_mask() to qemu_str_to_log_mask(), since
the qemu_log functionality is no longer restricted to TCG CPU
debug logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Abstract out the "print a human readable list of all the
valid log categories" functionality which is currently duplicated
in three separate places. (We leave the monitor.c help_cmd()
implementation as-is since it wants to send the message to
the monitor and add its own information.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
The qemu_log() functionality is no longer specific to TCG CPU debug logs.
Rename cpu_set_log_filename() to qemu_set_log_filename() and drop the
pointless wrapper set_cpu_log_filename().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
It's worth to clean-up translation blocks variables and move them
into one context as was suggested by Swirl.
Also if we use this context directly inside tcg_ctx, then it
speeds up code generation a bit.
Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Migration .save_live_iterate() functions return the number of bytes
transferred. The easiest way of doing this is by calling qemu_ftell(f)
at the beginning and end of the function to calculate the difference.
Make qemu_ftell() public so that block-migration will be able to use it.
Also adjust the ftell calculation for writable files where buf_offset
does not include buf_size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1360661835-28663-2-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
| |
The misnamed HOST_LONG_BITS is really HOST_POINTER_BITS. Here we're
explicitly using an unsigned long, rather than uintptr_t, so it is
more correct to select the swap size via ULONG_MAX.
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are lots of duplicate parsing code using strto*() in QEMU, and
most of that code is broken in one way or another. Even the visitors
code have duplicate integer parsing code[1]. This introduces functions
to help parsing unsigned int values: parse_uint() and parse_uint_full().
Parsing functions for signed ints and floats will be submitted later.
parse_uint_full() has all the checks made by opts_type_uint64() at
opts-visitor.c:
- Check for NULL (returns -EINVAL)
- Check for negative numbers (returns -EINVAL)
- Check for empty string (returns -EINVAL)
- Check for overflow or other errno values set by strtoll() (returns
-errno)
- Check for end of string (reject invalid characters after number)
(returns -EINVAL)
parse_uint() does everything above except checking for the end of the
string, so callers can continue parsing the remainder of string after
the number.
Unit tests included.
[1] string-input-visitor.c:parse_int() could use the same parsing code
used by opts-visitor.c:opts_type_int(), instead of duplicating that
logic.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We had two copies of a ffs function for longs with subtly different
semantics and, for the one in bitops.h, a confusing name: the result
was off-by-one compared to the library function ffsl.
Unify the functions into one, and solve the name problem by calling
the 0-based functions "bitops_ctzl" and "bitops_ctol" respectively.
This also fixes the build on platforms with ffsl, including Mac OS X
and Windows.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
MinGW has no strtok_r, so we need a declaration in sysemu/os-win32.h.
We must also fix the include statements in util/envlist.c to include
that file.
We currently don't need an implementation of strtok_r because the
code is compiled but not linked for MinGW.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
|
|
| |
This is now unused. Document the initial reference count of an object
and when it will be freed/finalized.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
| |
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
| |
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
# By Kevin Wolf (7) and others
# Via Stefan Hajnoczi
* stefanha/block:
block/raw-posix: Build fix for O_ASYNC
vmdk: Allow space in file name
parallels: Fix bdrv_open() error handling
dmg: Use g_free instead of free
dmg: Fix bdrv_open() error handling
vpc: Fix bdrv_open() error handling
cloop: Fix bdrv_open() error handling
bochs: Fix bdrv_open() error handling
sheepdog: pass vdi_id to sheep daemon for sd_close()
vmdk: Allow selecting SCSI adapter in image creation
block: Adds mirroring tests for resized images
block: Fix is_allocated_above with resized files
qemu-iotests: Add regression test for b7ab0fea
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Introduce a new option "adapter_type" when converting to vmdk images.
It can be one of the following: ide (default), buslogic, lsilogic
or legacyESX (according to the vmdk spec from vmware).
In case of a non-ide adapter, heads is set to 255 instead of the 16.
The latter is used for "ide".
Also see LP#545089
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.
The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.
Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.
A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.
Only linux has this support since it's the only platform that supports
multiqueue tap.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.
After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|/
|
|
|
| |
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove an unnecessary mutual inclusion loop between qemu-pixman.h and
console.h, since the former was only including the latter for
'PixelFormat*', which can be provided by typedefs.h. This requires a
minor adjustment to the files which included qemu-pixman.h, since
they were relying on it implicitly dragging in all of console.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* afaerber/qom-cpu: (37 commits)
kvm: Pass CPUState to kvm_on_sigbus_vcpu()
cpu: Unconditionalize CPUState fields
target-m68k: Use type_register() instead of type_register_static()
target-unicore32: Use type_register() instead of type_register_static()
target-openrisc: Use type_register() instead of type_register_static()
target-unicore32: Catch attempt to instantiate abstract type in cpu_init()
target-openrisc: Catch attempt to instantiate abstract type in cpu_init()
target-m68k: Catch attempt to instantiate abstract type in cpu_init()
target-arm: Catch attempt to instantiate abstract type in cpu_init()
target-alpha: Catch attempt to instantiate abstract type in cpu_init()
qom: Introduce object_class_is_abstract()
target-unicore32: Detect attempt to instantiate non-CPU type in cpu_init()
target-openrisc: Detect attempt to instantiate non-CPU type in cpu_init()
target-m68k: Detect attempt to instantiate non-CPU type in cpu_init()
target-alpha: Detect attempt to instantiate non-CPU type in cpu_init()
target-arm: Detect attempt to instantiate non-CPU type in cpu_init()
cpu: Add model resolution support to CPUClass
target-i386: Remove setting tsc-frequency from x86_def_t
target-i386: Set custom features/properties without intermediate x86_def_t
target-i386: Remove vendor_override field from CPUX86State
...
Conflicts:
tests/Makefile
Resolved simple conflict caused by lack of context in Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since commit 20d695a9254c1b086a456d3b79a3c311236643ba (kvm: Pass
CPUState to kvm_arch_*) CPUArchState is no longer needed.
Allows to change qemu_kvm_eat_signals() argument as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
|