summaryrefslogtreecommitdiffstats
path: root/hw/intc
Commit message (Collapse)AuthorAgeFilesLines
* hw/arm_gic: Correctly restore nested irq priorityFrançois Baldassari2015-11-191-2/+2
| | | | | | | | | | | | Upon activating an interrupt, set the corresponding priority bit in the APR/NSAPR registers without touching the currently set bits. In the event of nested interrupts, the GIC will then have the information it needs to restore the priority of the pre-empted interrupt once the higher priority interrupt finishes execution. Signed-off-by: François Baldassari <francois@pebble.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Remove the definition of NUM_CPUWei Huang2015-11-101-5/+3
| | | | | | | | | | | | | | arm_gic.c retrieves CPU number using either NUM_CPU(s) or s->num_cpu. Such mixed-uses make source code inconsistent. This patch removes NUM_CPU(s), which was defined for MPCore tweak long ago, and instead favors s->num_cpu. The source is more consistent after this small tweak. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 1446744293-32365-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* armv7-m: Implement SYSRESETREQMichael Davidsaver2015-11-031-1/+8
| | | | | | | | | | Implement the SYSRESETREQ bit of the AIRCR register for armv7-m (ie. cortex-m3) to trigger a GPIO out. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Standardize i.MX AVIC debugJean-Christophe Dubois2015-10-271-26/+18
| | | | | | | | | | | | | | | | The goal is to have debug code always compiled during build. We standardize all debug output on the following format: [QOM_TYPE_NAME]reporting_function: debug message We also replace IPRINTF with qemu_log_mask(). The qemu_log_mask() output is following the same format as the above debug. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 29885ffea2577eaf2288c1d17fd87ee951748b49.1445781957.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* arm_gic_kvm: Disable live migration if not supportedPavel Fedin2015-10-271-11/+11
| | | | | | | | | | | | | Currently, if the kernel does not have live migration API, the migration will still be attempted, but vGIC save/restore functions will just not do anything. This will result in a broken machine state. This patch fixes the problem by adding migration blocker if kernel API is not supported. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* openpic: add to misc categoryLaurent Vivier2015-10-232-0/+2
| | | | | | | | | openpic is a programmable interrupt controller, so add it to the misc category. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* s/cpu_get_real_ticks/cpu_get_host_ticks/Christopher Covington2015-10-081-1/+1
| | | | | | | | | | | This should help clarify the purpose of the function that returns the host system's CPU cycle count. Signed-off-by: Christopher Covington <cov@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> ppc portion Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* cpu/apic: drop icc bus/bridgeChen Fan2015-10-021-3/+2
| | | | | | | | | | | | | After CPU hotplug has been converted to BUS-less hot-plug infrastructure, the only function ICC bus performs is to propagate reset to LAPICs. However LAPIC could be reset by registering its reset handler after all device are initialized. Do so and drop ~30LOC of not needed anymore ICCBus related code. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* apic: move APIC's MMIO region mapping into APICChen Fan2015-10-021-6/+0
| | | | | | | | | | | | | When ICC bus/bridge is removed, APIC MMIO will be left unmapped since it was mapped into system's address space indirectly by ICC bridge. Fix it by moving mapping into APIC code, so it would be possible to remove ICC bus/bridge code later. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* hmp: implemented io apic dump state for TCGPavel Butsykin2015-09-251-0/+12
| | | | | | | | | | | Added support emulator for the hmp command "info ioapic" Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-10-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hmp: added io apic dump statePavel Butsykin2015-09-251-0/+55
| | | | | | | | | | | | | | | | | | | | | | Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* apic_internal.h: rename ESR_ILLEGAL_ADDRESS to APIC_ESR_ILLEGAL_ADDRESSPavel Butsykin2015-09-251-2/+2
| | | | | | | | | | | | Added prefix APIC_ for determining the constant of a particular subsystem, improve the overall readability and match other constant names. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* apic_internal.h: make some apic_get_* functions externally visiblePavel Butsykin2015-09-251-17/+1
| | | | | | | | | | | | | Move apic_get_bit(), apic_set_bit() to apic_internal.h, make the apic_get_ppr symbol external. It's necessary to work with isr, tmr, irr and ppr outside hw/intc/apic.c Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ioapic: fix contents of arbitration registerPaolo Bonzini2015-09-251-3/+1
| | | | | | | The arbitration register should read to the same value as the IOAPIC id register. Fixes kvm-unit-tests ioapic.flat. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ioapic: coalesce level interruptsPaolo Bonzini2015-09-251-1/+3
| | | | | | | | If a level-triggered interrupt goes down and back up before the corresponding EOI, it should be coalesced. This fixes one testcase in kvm-unit-tests' ioapic.flat. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* hw/intc: Initial implementation of vGICv3Pavel Fedin2015-09-242-0/+150
| | | | | | | | | | | | | | | This is the initial version of KVM-accelerated GICv3 support. State load and save are not yet supported, live migration is not possible. In order to get correct class name in a simpler way, gicv3_class_name() function is implemented, similar to gic_class_name(). Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Ashok kumar <ashoks@broadcom.com> Message-id: 69d8f01d14994d7a1a140e96aef59fd332d02293.1441784344.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* intc/gic: Extract some reusable vGIC codePavel Fedin2015-09-242-65/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some functions previously used only by vGICv2 are useful also for vGICv3 implementation. Untie them from GICState and make accessible from within other modules: - kvm_arm_gic_set_irq() - kvm_gic_supports_attr() - moved to common code and renamed to kvm_device_check_attr() - kvm_gic_access() - turned into GIC-independent kvm_device_access(). Data pointer changed to void * because some GICv3 registers are 64-bit wide Some of these changes are not used right now, but they will be helpful for implementing live migration. Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but they would require two extra parameters (s->dev_fd and s->num_cpu) as well as lots of typecasts of 's' to DeviceState * and back to GICState *. This makes the code very ugly so i decided to stop at this point. I tried also an approach with making a base class for all possible GICs, but it would contain only three variables (dev_fd, cpu_num and irq_num), and accessing them through the rest of the code would be again tedious (either ugly casts or qemu-style separate object pointer). So i disliked it too. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Ashok kumar <ashoks@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc: Implement GIC-500 base classShlomo Pongratz2015-09-242-0/+141
| | | | | | | | | | | | | | | | | | This class is to be used by both software and KVM implementations of GICv3 Currently it is mostly a placeholder, but in future it is supposed to hold qemu's representation of GICv3 state, which is necessary for migration. The interface of this class is fully compatible with GICv2 one. This is done in order to simplify integration with existing code. Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Ashok kumar <ashoks@broadcom.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: aff8baaee493cdcab0694b4a1d4dd5ff27c37ed2.1441784344.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* typofixes - v4Veres Lajos2015-09-111-1/+1
| | | | | Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* maint: remove double semicolons in many filesDaniel P. Berrange2015-09-111-1/+1
| | | | | | | | | | | | | | | A number of source files have statements accidentally terminated by a double semicolon - eg 'foo = bar;;'. This is harmless but a mistake none the less. The tcg/ia64/tcg-target.c file is whitelisted because it has valid use of ';;' in a comment containing assembly code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* hw/intc/arm_gic_common: Configure IRQs as NS if doing direct NS kernel bootPeter Maydell2015-09-081-3/+48
| | | | | | | | | | | | | | | | | | | | If we directly boot a kernel in NonSecure on a system where the GIC supports the security extensions then we must cause the GIC to configure its interrupts into group 1 (NonSecure) rather than the usual group 0, and with their initial priority set to the highest NonSecure priority rather than the usual highest Secure priority. Otherwise the guest kernel will be unable to use any interrupts. Implement this behaviour, controlled by a flag which we set if appropriate when the ARM bootloader code calls our ARMLinuxBootIf interface callback. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1441383782-24378-4-git-send-email-peter.maydell@linaro.org
* hw/intc/arm_gic: Actually set the active bits for active interruptsPeter Maydell2015-09-081-0/+2
| | | | | | | | | | | Although we were correctly handling interrupts becoming active and then inactive, we weren't actually exposing this to the guest by setting the 'active' flag for the interrupt, so reads of GICD_ICACTIVERn and GICD_ISACTIVERn would generally incorrectly return zeroes. Correct this oversight. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438089748-5528-6-git-send-email-peter.maydell@linaro.org
* hw/intc/arm_gic: Drop running_irq and last_active arraysPeter Maydell2015-09-082-34/+76
| | | | | | | | | | | | | | The running_irq and last_active arrays represent state which doesn't exist in a real hardware GIC. The only thing we use them for is updating the running priority when an interrupt is completed, but in fact we can use the active-priority registers to do this. The running priority is always the priority corresponding to the lowest set bit in the active priority registers, because only one interrupt at any particular priority can be active at once. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438089748-5528-5-git-send-email-peter.maydell@linaro.org
* hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registersPeter Maydell2015-09-082-4/+115
| | | | | | | | | | | | | | | | | | A GICv2 has both GICC_APR<n> and GICC_NSAPR<n> registers, with the latter holding the active priority bits for Group 1 interrupts (usually Nonsecure interrupts), and the Nonsecure view of the GICC_APR<n> is the second half of the GICC_NSAPR<n> registers. Turn our half-hearted implementation of APR<n> into a proper implementation of both APR<n> and NSAPR<n>: * Add the underlying state for NSAPR<n> * Make sure APR<n> aren't visible for pre-GICv2 * Implement reading of NSAPR<n> * Make non-secure reads of APR<n> behave correctly * Implement writing to APR<n> and NSAPR<n> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438089748-5528-4-git-send-email-peter.maydell@linaro.org
* hw/intc/arm_gic: Running priority is group priority, not full priorityPeter Maydell2015-09-081-1/+27
| | | | | | | | | | | | Priority values for the GIC are divided into a "group priority" and a "subpriority" (with the division being determined by the binary point register). The running priority is only determined by the group priority of the active interrupts, not the subpriority. In particular, this means that there can't be more than one active interrupt at any particular group priority. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438089748-5528-3-git-send-email-peter.maydell@linaro.org
* armv7m_nvic: Implement ICSR without using internal GIC statePeter Maydell2015-09-081-7/+6
| | | | | | | | | | | | | | Change the implementation of the Interrupt Control and State Register in the v7M NVIC to not use the running_irq and last_active internal state fields in the GIC. These fields don't correspond to state in a real GIC and will be removed soon. The changes to the ICSR are: * the VECTACTIVE field is documented as identical to the IPSR[8:0] field, so implement it that way * implement RETTOBASE via looking at the active state bits Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1438089748-5528-2-git-send-email-peter.maydell@linaro.org
* s390x/kvm: make setting of in-kernel irq routes more efficientJens Freimann2015-09-071-0/+2
| | | | | | | | | | | | | | | | | | When we add new adapter routes we call kvm_irqchip_add_route() for every virtqueue and in the same step also do the KVM_SET_GSI_ROUTING ioctl. This is unnecessary costly as the interface allows us to set multiple routes in one go. Let's first add all routes to the table stored in the global kvm_state and then do the ioctl to commit the routes to the in-kernel irqchip. This saves us several ioctls to the kernel where for each call a list is reallocated and populated. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
* hw/arm/gic: Kill code duplicationPavel Fedin2015-08-133-72/+61
| | | | | | | | | | Extracted duplicated initialization code from SW-emulated and KVM GIC implementations and put into gic_init_irqs_and_mmio() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-id: 8ea5b2781ef39cb5989420987fc73c70e377687d.1438758065.git.p.fedin@samsung.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Fix Coding style for AVIC emulator.Jean-Christophe Dubois2015-08-131-9/+7
| | | | | | | Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 01e1d9026220992405819f25640ebd5bb843fc93.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* i.MX: Split AVIC emulator in a header file and a source fileJean-Christophe Dubois2015-08-131-37/+3
| | | | | | | Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 06829257e845d693be05c7d491134313c1615d1a.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* xics_kvm: Don't enable KVM_CAP_IRQ_XICS if already enabledBharata B Rao2015-07-071-0/+10
| | | | | | | | | | | | | | | | | | | | When supporting CPU hot removal by parking the vCPU fd and reusing it during hotplug again, there can be cases where we try to reenable KVM_CAP_IRQ_XICS CAP for the vCPU for which it was already enabled. Introduce a boolean member in ICPState to track this and don't reenable the CAP if it was already enabled earlier. Re-enabling this CAP should ideally work, but currently it results in kernel trying to create and associate ICP with this vCPU and that fails since there is already an ICP associated with it. Hence this patch is needed to work around this problem in the kernel. This change allows CPU hot removal to work for sPAPR. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
* spapr: Merge sPAPREnvironment into sPAPRMachineStateDavid Gibson2015-07-072-11/+11
| | | | | | | | | | | | | | | | | The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
* intc: arm_gic_kvm: set the qemu_irq/gsi mappingEric Auger2015-07-061-0/+6
| | | | | | | | | | | | | The arm_gic_kvm now calls kvm_irqchip_set_qemuirq_gsi to build the hash table storing qemu_irq/gsi mappings. From that point on irqfd can be setup directly from the qemu_irq using kvm_irqchip_add_irqfd_notifier. Signed-off-by: Eric Auger <eric.auger@linaro.org> Tested-by: Vikram Sethi <vikrams@codeaurora.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* hw/intc/arm_gic_common.c: Reset all registersPeter Maydell2015-07-061-3/+18
| | | | | | | | | | | | | | | | | | | The arm_gic_common reset function was missing reset code for several of the GIC's state fields: * bpr[] * abpr[] * priority1[] * priority2[] * sgi_pending[] * irq_target[] (SMP configurations only) These probably went unnoticed because most guests will either never touch them, or will write to them in the process of configuring the GIC before enabling interrupts. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1435602345-32210-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
* qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster2015-06-221-3/+3
| | | | | | | | | | | | | | | | | | | | | These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* arm_gic: gic_update should always update all coresJohan Karlsson2015-06-151-1/+1
| | | | | | | | | | | This patch fixes so that gic_update always updates all the cores with new pending irq states. If the function returns early it is possible to get interrupts that has already been acknowledged. Signed-off-by: Johan Karlsson <johan.karlsson@enea.com> [PMM: rebased to apply to current master] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela2015-06-121-6/+4
| | | | | | | | | | | | | | | | We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
* Merge remote-tracking branch ↵Peter Maydell2015-06-041-4/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'remotes/mjt/tags/pull-trivial-patches-2015-06-03' into staging trivial patches for 2015-06-03 # gpg: Signature made Wed Jun 3 14:07:47 2015 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-06-03: (30 commits) configure: postfix --extra-cflags to QEMU_CFLAGS cadence_gem: Fix Rx buffer size field mask slirp: use less predictable directory name in /tmp for smb config (CVE-2015-4037) translate-all: delete prototype for non-existent function Add -incoming help text hw/display/tc6393xb.c: Fix misusing qemu_allocate_irqs for single irq hw/arm/nseries.c: Fix misusing qemu_allocate_irqs for single irq hw/alpha/typhoon.c: Fix misusing qemu_allocate_irqs for single irq hw/unicore32/puv3.c: Fix misusing qemu_allocate_irqs for single irq hw/lm32/milkymist.c: Fix misusing qemu_allocate_irqs for single irq hw/lm32/lm32_boards.c: Fix misusing qemu_allocate_irqs for single irq hw/ppc/prep.c: Fix misusing qemu_allocate_irqs for single irq hw/sparc/sun4m.c: Fix misusing qemu_allocate_irqs for single irq hw/timer/arm_timer.c: Fix misusing qemu_allocate_irqs for single irq hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irq hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irq hw/i386/pc: Fix misusing qemu_allocate_irqs for single irq hw/intc/exynos4210_gic.c: Fix memory leak by adjusting order hw/arm/omap_sx1.c: Fix memory leak spotted by valgrind hw/ppc/e500.c: Fix memory leak ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * hw/intc/exynos4210_gic.c: Fix memory leak by adjusting orderShannon Zhao2015-06-031-4/+3
| | | | | | | | | | | | Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* | Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell2015-06-041-3/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | staging X86 queue 2015-06-02 # gpg: Signature made Tue Jun 2 20:21:17 2015 BST using RSA key ID 984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: arch_init: Drop target-x86_64.conf target-i386: Register QOM properties for feature flags apic: convert ->busdev.qdev casts to C casts target-i386: Fix signedness of MSR_IA32_APICBASE_BASE pc: Ensure non-zero CPU ref count after attaching to ICC bus Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * | apic: convert ->busdev.qdev casts to C castsZhu Guihua2015-06-021-3/+6
| |/ | | | | | | | | | | | | | | | | | | | | Use C casts to avoid accessing ICCDevice's qdev field directly. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* | arm_gicv2m: set kvm_gsi_direct_mapping and kvm_msi_via_irqfd_allowedEric Auger2015-06-021-0/+2
| | | | | | | | | | | | | | | | | | | | After introduction of kvm_arch_msi_data_to_gsi, kvm_gsi_direct_mapping now can be set on ARM. Also kvm_msi_via_irqfd_allowed can be set, depending on kernel irqfd support, hence enabling VIRTIO-PCI with vhost back-end. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* | arm_gicv2m: Add GICv2m widget to support MSIsChristoffer Dall2015-06-022-0/+191
|/ | | | | | | | | | | | | | | | | | | | | | | The ARM GICv2m widget is a little device that handles MSI interrupt writes to a trigger register and ties them to a range of interrupt lines wires to the GIC. It has a few status/id registers and the interrupt wires, and that's about it. A board instantiates the device by setting the base SPI number and number SPIs for the frame. The base-spi parameter is indexed in the SPI number space only, so base-spi == 0, means IRQ number 32. When a device (the PCI host controller) writes to the trigger register, the payload is the GIC IRQ number, so we have to subtract 32 from that and then index into our frame of SPIs. When instantiating a GICv2m device, tell PCI that we have instantiated something that can deal with MSIs. We rely on the board actually wiring up the GICv2m to the PCI host controller. Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1432897270-7780-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Add grouping support to gic_update()Peter Maydell2015-05-121-5/+22
| | | | | | | | | | | | | Add support to gic_update() for determining the current IRQ and FIQ status when interrupt grouping is supported. This simply requires that instead of always raising IRQ we check the group of the highest priority pending interrupt and the GICC_CTLR.FIQEn bit to see whether we should raise IRQ or FIQ. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1430502643-25909-15-git-send-email-peter.maydell@linaro.org
* hw/intc/arm_gic: Change behavior of IAR writesFabian Aggeler2015-05-123-8/+18
| | | | | | | | | | | | | | | | | | Grouping (GICv2) and Security Extensions change the behavior of IAR reads. Acknowledging Group0 interrupts is only allowed from Secure state and acknowledging Group1 interrupts from Secure state is only allowed if AckCtl bit is set. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-14-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-14-git-send-email-greg.bellows@linaro.org [PMM: simplify significantly by reusing the existing gic_get_current_pending_irq() rather than reimplementing the same logic here] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Change behavior of EOIR writesFabian Aggeler2015-05-123-4/+14
| | | | | | | | | | | | | | | | Grouping (GICv2) and Security Extensions change the behavior of EOIR writes. Completing Group0 interrupts is only allowed from Secure state. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-13-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-13-git-send-email-greg.bellows@linaro.org [PMM: Rather than go to great lengths to ignore the UNPREDICTABLE case of a Secure EOI of a Group1 (NS) irq with AckCtl == 0, we just let it fall through; add a comment about it.] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Handle grouping for GICC_HPPIRFabian Aggeler2015-05-121-1/+27
| | | | | | | | | | | | | | | | Grouping (GICv2) and Security Extensions change the behaviour of reads of the highest priority pending interrupt register (ICCHPIR/GICC_HPPIR). Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-12-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-12-git-send-email-greg.bellows@linaro.org [PMM: make utility fn static; coding style fixes; AckCtl has an effect for GICv2 without security extensions as well; removed checks on enable bits because these are done when we set current_pending[cpu]] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Restrict priority viewFabian Aggeler2015-05-123-7/+61
| | | | | | | | | | | | | | | GICs with Security Extensions restrict the non-secure view of the interrupt priority and priority mask registers. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-11-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-15-git-send-email-greg.bellows@linaro.org [PMM: minor code tweaks; fixed missing masking in gic_set_priority_mask and gic_set_priority] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Implement Non-secure view of RPRFabian Aggeler2015-05-121-1/+18
| | | | | | | | | | | | | | For GICs with Security Extensions Non-secure reads have a restricted view on the current running priority. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-10-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-11-git-send-email-greg.bellows@linaro.org [PMM: make function static, minor comment tweak] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/intc/arm_gic: Make ICCICR/GICC_CTLR bankedFabian Aggeler2015-05-125-13/+72
| | | | | | | | | | | | | | | | | | | | | | | ICCICR/GICC_CTLR is banked in GICv1 implementations with Security Extensions or in GICv2 in independent from Security Extensions. This makes it possible to enable forwarding of interrupts from the CPU interfaces to the connected processors for Group0 and Group1. We also allow to set additional bits like AckCtl and FIQEn by changing the type from bool to uint32. Since the field does not only store the enable bit anymore and since we are touching the vmstate, we use the opportunity to rename the field to cpu_ctlr. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1430502643-25909-9-git-send-email-peter.maydell@linaro.org Message-id: 1429113742-8371-9-git-send-email-greg.bellows@linaro.org [PMM: rewrote to store state in a single uint32_t rather than keeping the NS and S banked variants separate; this considerably simplifies the get/set functions] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OpenPOWER on IntegriCloud