summaryrefslogtreecommitdiffstats
path: root/block
Commit message (Collapse)AuthorAgeFilesLines
...
* block: Let bdrv_drain_all() to call aio_poll() for each AioContextAlexander Yarygin2015-06-231-16/+26
| | | | | | | | | | | | | | | | | | | | | | | After the commit 9b536adc ("block: acquire AioContext in bdrv_drain_all()") the aio_poll() function got called for every BlockDriverState, in assumption that every device may have its own AioContext. If we have thousands of disks attached, there are a lot of BlockDriverStates but only a few AioContexts, leading to tons of unnecessary aio_poll() calls. This patch changes the bdrv_drain_all() function allowing it find shared AioContexts and to call aio_poll() only for unique ones. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1433936297-7098-4-git-send-email-yarygin@linux.vnet.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster2015-06-228-0/+8
| | | | | | | | | In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Move #include out of qerror.hMarkus Armbruster2015-06-2211-0/+13
| | | | | | | Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Finally unused, clean upMarkus Armbruster2015-06-221-6/+0
| | | | | | | | | | | | | Remove it except for two things in qerror.h: * Two #include to be cleaned up separately to avoid cluttering this patch. * The QERR_ macros. Mark as obsolete. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster2015-06-2210-25/+25
| | | | | | | | | | | | | | | | | | | | | These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
* qobject: Use 'bool' for qboolEric Blake2015-06-223-5/+5
| | | | | | | | | | | | We require a C99 compiler, so let's use 'bool' instead of 'int' when dealing with boolean values. There are few enough clients to fix them all in one pass. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell2015-06-156-95/+62
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Block layer core and image format patches # gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (25 commits) block: Fix reopen flag inheritance block: Add BlockDriverState.inherits_from block: Add list of children to BlockDriverState queue.h: Add QLIST_FIX_HEAD_PTR() block: Drain requests before swapping nodes in bdrv_swap() block: Move flag inheritance to bdrv_open_inherit() block: Use QemuOpts in bdrv_open_common() block: Use macro for cache option names vmdk: Use bdrv_open_image() quorum: Use bdrv_open_image() check-qdict: Test cases for new functions qdict: Add qdict_{set,copy}_default() qdict: Add qdict_array_entries() iotests: Add tests for overriding BDRV_O_PROTOCOL block: driver should override flags in bdrv_open() block: Change bitmap truncate conditional to assertion block: record new size in bdrv_dirty_bitmap_truncate raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size vmdk: Use vmdk_find_index_in_cluster everywhere vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
| * block: Fix reopen flag inheritanceKevin Wolf2015-06-121-26/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reopening an image, the block layer already takes care to reopen bs->file as well with recalculated inherited flags. The same must happen for any other child (most notably missing before this patch: backing files). If bs->file (or any other child) didn't originally inherit from bs, e.g. because it was created separately and then only referenced, it must not inherit flags on reopen either, so check the inherited_from field before propagation the reopen down. VMDK already reopened its extents manually; this code can now be dropped. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
| * block: Move flag inheritance to bdrv_open_inherit()Kevin Wolf2015-06-124-8/+7
| | | | | | | | | | | | | | | | | | | | | | Instead of letting every caller of bdrv_open() determine the right flags for its child node manually and pass them to the function, pass the parent node and the role of the newly opened child (like backing file, protocol layer, etc.). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
| * vmdk: Use bdrv_open_image()Kevin Wolf2015-06-121-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | Besides standardising on a single interface for opening child nodes, this patch allows the user to specify options to individual extent nodes. Overriding file names isn't possible with this yet, so it's of limited usefulness, but still a step forward. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com>
| * quorum: Use bdrv_open_image()Kevin Wolf2015-06-121-40/+11
| | | | | | | | | | | | | | | | | | | | | | | | Besides standardising on a single interface for opening child nodes, this simplifies the .bdrv_open() implementation of the quorum block driver by using block layer functionality for handling BlockdevRefs. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
| * raw-posix: Fix .bdrv_co_get_block_status() for unaligned image sizeKevin Wolf2015-06-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Image files with an unaligned image size have a final hole that starts at EOF, i.e. in the middle of a sector. Currently, *pnum == 0 is returned when checking the status of this sector. In qemu-img, this triggers an assertion failure. In order to fix this, one type for the sector that contains EOF must be found. Treating a hole as data is safe, so this patch rounds the calculated number of data sectors up, so that a partial sector at EOF is treated as a full data sector. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1229394 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Cole Robinson <crobinso@redhat.com>
| * vmdk: Use vmdk_find_index_in_cluster everywhereFam Zheng2015-06-121-8/+2
| | | | | | | | | | | | Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
| * vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_statusFam Zheng2015-06-121-1/+12
| | | | | | | | | | | | | | | | | | | | It has the similar issue with b1649fae49a8. Since the calculation is repeated for a few times already, introduce a function so it can be reused. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
| * qcow2: Add DEFAULT_L2_CACHE_CLUSTERSMax Reitz2015-06-122-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a relatively large cluster size is chosen, the default of 1 MB L2 cache is not really appropriate. In this case, unless overridden by the user, the default cache size should not be determined by its size in bytes but by the number of L2 tables (clusters) it is supposed to contain. Note that without this patch, MIN_L2_CACHE_SIZE will effectively take over the same role. However, providing space for just two L2 tables is not enough to be the default. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
| * qcow2: Set MIN_L2_CACHE_SIZE to 2Max Reitz2015-06-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The L2 cache must cover at least two L2 tables, because during COW two L2 tables are accessed simultaneously. Reported-by: Alexander Graf <agraf@suse.de> Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: Max Reitz <mreitz@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Reviewed-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* | throttle: add the name of the ThrottleGroup to BlockDeviceInfoAlberto Garcia2015-06-121-0/+3
| | | | | | | | | | | | | | Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 172df91f09c69c6f0440a697bbd1b3f95b077ee4.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | throttle: acquire the ThrottleGroup lock in bdrv_swap()Alberto Garcia2015-06-121-1/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | bdrv_swap() touches the fields of a BlockDriverState that are protected by the ThrottleGroup lock. Although those fields end up in their original place, they are temporarily swapped in the process, so there's a chance that an operation on a member of the same group happening on a different thread can try to use them. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: d92dc40d7c4f1fc5cda5cbbf4ffb7a4670b79d17.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | throttle: Add throttle group supportAlberto Garcia2015-06-123-64/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The throttle group support use a cooperative round robin scheduling algorithm. The principles of the algorithm are simple: - Each BDS of the group is used as a token in a circular way. - The active BDS computes if a wait must be done and arms the right timer. - If a wait must be done the token timer will be armed so the token will become the next active BDS. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | throttle: Add throttle group infrastructureAlberto Garcia2015-06-122-0/+262
| | | | | | | | | | | | | | Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 2fdb4de17210b733a13eb472c33cd08b45f8fd21.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | throttle: Extract timers from ThrottleState into a separate structureBenoît Canet2015-06-121-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Group throttling will share ThrottleState between multiple bs. As a consequence the ThrottleState will be accessed by multiple aio context. Timers are tied to their aio context so they must go out of the ThrottleState structure. This commit paves the way for each bs of a common ThrottleState to have its own timer. Signed-off-by: Benoit Canet <benoit.canet@nodalink.com> Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 6cf9ea96d8b32ae2f8769cead38f68a6a0c8c909.1433779731.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* | raw-posix: Fix .bdrv_co_get_block_status() for unaligned image sizeKevin Wolf2015-06-121-2/+3
|/ | | | | | | | | | | | | | | | | | Image files with an unaligned image size have a final hole that starts at EOF, i.e. in the middle of a sector. Currently, *pnum == 0 is returned when checking the status of this sector. In qemu-img, this triggers an assertion failure. In order to fix this, one type for the sector that contains EOF must be found. Treating a hole as data is safe, so this patch rounds the calculated number of data sectors up, so that a partial sector at EOF is treated as a full data sector. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1229394 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1433840108-9996-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* blkdebug: Simplify passing of Error through qemu_opts_foreach()Markus Armbruster2015-06-091-6/+4
| | | | | | | | Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
* QemuOpts: Convert qemu_opts_foreach() to ErrorMarkus Armbruster2015-06-091-3/+3
| | | | | | | | | Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
* QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failureMarkus Armbruster2015-06-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
* iscsi: Remove pointless runtime check of macro valueFam Zheng2015-06-031-7/+0
| | | | | | | | raw_bsd already has QEMU_BUILD_BUG_ON(BDRV_SECTOR_SIZE != 512), so iscsi should relax. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* qcow2/qcow: protect against uninitialized encryption keyDaniel P. Berrange2015-05-223-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a qcow[2] file is opened, if the header reports an encryption method, this is used to set the 'crypt_method_header' field on the BDRVQcow[2]State struct, and the 'encrypted' flag in the BDRVState struct. When doing I/O operations, the 'crypt_method' field on the BDRVQcow[2]State struct is checked to determine if encryption needs to be applied. The crypt_method_header value is copied into crypt_method when the bdrv_set_key() method is called. The QEMU code which opens a block device is expected to always do a check if (bdrv_is_encrypted(bs)) { bdrv_set_key(bs, ....key...); } If code forgets to do this, then 'crypt_method' is never set and so when I/O is performed, QEMU writes plain text data into a sector which is expected to contain cipher text, or when reading, will return cipher text instead of plain text. Change the qcow[2] code to consult bs->encrypted when deciding whether encryption is required, and assert(s->crypt_method) to protect against cases where the caller forgets to set the encryption key. Also put an assert in the set_key methods to protect against the case where the caller sets an encryption key on a block device that does not have encryption Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: style fixes in qcow2-cache.cAlberto Garcia2015-05-221-3/+3
| | | | | | | | | | Fix pointer declaration to make it consistent with the rest of the code. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: make qcow2_cache_put() a void functionAlberto Garcia2015-05-224-71/+17
| | | | | | | | | | This function never receives an invalid table pointer, so we can make it void and remove all the error checking code. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use a hash to look for entries in the L2 cacheAlberto Garcia2015-05-221-2/+7
| | | | | | | | | | | | | | | | | | | The current cache algorithm traverses the array starting always from the beginning, so the average number of comparisons needed to perform a lookup is proportional to the size of the array. By using a hash of the offset as the starting point, lookups are faster and independent from the array size. The hash is computed using the cluster number of the table, multiplied by 4 to make it perform better when there are collisions. In my tests, using a cache with 2048 entries, this reduces the average number of comparisons per lookup from 430 to 2.5. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: remove qcow2_cache_find_entry_to_replace()Alberto Garcia2015-05-221-29/+16
| | | | | | | | | | | A cache miss means that the whole array was traversed and the entry we were looking for was not found, so there's no need to traverse it again in order to select an entry to replace. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use an LRU algorithm to replace entries from the L2 cacheAlberto Garcia2015-05-221-18/+15
| | | | | | | | | | | | | | | | | | | The current algorithm to evict entries from the cache gives always preference to those in the lowest positions. As the size of the cache increases, the chances of the later elements of being removed decrease exponentially. In a scenario with random I/O and lots of cache misses, entries in positions 8 and higher are rarely (if ever) evicted. This can be seen even with the default cache size, but with larger caches the problem becomes more obvious. Using an LRU algorithm makes the chances of being removed from the cache independent from the position. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: simplify qcow2_cache_put() and qcow2_cache_entry_mark_dirty()Alberto Garcia2015-05-221-17/+15
| | | | | | | | | | | Since all tables are now stored together, it is possible to obtain the position of a particular table directly from its address, so the operation becomes O(1). Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: use one single memory block for the L2/refcount cache tablesAlberto Garcia2015-05-224-39/+39
| | | | | | | | | | | | | | | | | | The qcow2 L2/refcount cache contains one separate table for each cache entry. Doing one allocation per table adds unnecessary overhead and it also requires us to store the address of each table separately. Since the size of the cache is constant during its lifetime, it's better to have an array that contains all the tables using one single allocation. In my tests measuring freshly created caches with sizes 128MB (L2) and 32MB (refcount) this uses around 10MB of RAM less. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vmdk: Fix overflow if l1_size is 0x20000000Fam Zheng2015-05-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Richard Jones caught this bug with afl fuzzer. In fact, that's the only possible value to overflow (extent->l1_size = 0x20000000) l1_size: l1_size = extent->l1_size * sizeof(long) => 0x80000000; g_try_malloc returns NULL because l1_size is interpreted as negative during type casting from 'int' to 'gsize', which yields a enormous value. Hence, by coincidence, we get a "not too bad" behavior: qemu-img: Could not open '/tmp/afl6.img': Could not open '/tmp/afl6.img': Cannot allocate memory Values larger than 0x20000000 will be refused by the validation in vmdk_add_extent. Values smaller than 0x20000000 will not overflow l1_size. Cc: qemu-stable@nongnu.org Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* vmdk: Fix next_cluster_sector for compressed writeFam Zheng2015-05-221-4/+10
| | | | | | | | | | | | | | | This fixes the bug introduced by commit c6ac36e (vmdk: Optimize cluster allocation). Sometimes, write_len could be larger than cluster size, because it contains both data and marker. We must advance next_cluster_sector in this case, otherwise the image gets corrupted. Cc: qemu-stable@nongnu.org Reported-by: Antoni Villalonga <qemu-list@friki.cat> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qcow2: Flush pending discards before allocating clusterKevin Wolf2015-05-221-0/+5
| | | | | | | | | | | | | | | | | | | | Before a freed cluster can be reused, pending discards for this cluster must be processed. The original assumption was that this was not a problem because discards are only cached during discard/write zeroes operations, which are synchronous so that no concurrent write requests can cause cluster allocations. However, the discard/write zeroes operation itself can allocate a new L2 table (and it has to in order to put zero flags there), so make sure we can cope with the situation. This fixes https://bugs.launchpad.net/bugs/1349972. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
* block: get_block_status: use "else" when testing the opposite conditionPaolo Bonzini2015-05-221-3/+1
| | | | | | | | | | | | | A bit of Boolean algebra (and common sense) tells us that the second "if" here is looking for blocks that are not allocated. This is the opposite of the "if" that sets BDRV_BLOCK_ALLOCATED, and thus it can use an "else". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1431599702-10431-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: Fix NULL deference for unaligned write if qiov is NULLFam Zheng2015-05-221-2/+95
| | | | | | | | | | | | | | | | | | | | | For zero write, callers pass in NULL qiov (qemu-io "write -z" or scsi-disk "write same"). Commit fc3959e466 fixed bdrv_co_write_zeroes which is the common case for this bug, but it still exists in bdrv_aio_write_zeroes. A simpler fix would be in bdrv_co_do_pwritev which is the NULL dereference point and covers both cases. So don't access it in bdrv_co_do_pwritev in this case, use three aligned writes. [Initialize ret to 0 in bdrv_co_do_zero_pwritev() to avoid uninitialized variable warning with gcc 4.9.2. --Stefan] Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1431522721-3266-3-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Revert "block: Fix unaligned zero write"Fam Zheng2015-05-221-39/+6
| | | | | | | | | | | | | | | | This reverts commit fc3959e4669a1c2149b91ccb05101cfc7ae1fc05. The core write code already handles the case, so remove this duplication. Because commit 61007b316 moved the touched code from block.c to block/io.c, the change is manually reverted. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431522721-3266-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: align bounce buffers to pageDenis V. Lunev2015-05-222-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following sequence int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644); for (i = 0; i < 100000; i++) write(fd, buf, 4096); performs 5% better if buf is aligned to 4096 bytes. The difference is quite reliable. On the other hand we do not want at the moment to enforce bounce buffering if guest request is aligned to 512 bytes. The patch changes default bounce buffer optimal alignment to MAX(page size, 4k). 4k is chosen as maximal known sector size on real HDD. The justification of the performance improve is quite interesting. From the kernel point of view each request to the disk was split by two. This could be seen by blktrace like this: 9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img] 9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img] 9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img] 9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img] 9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img] 9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img] 9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img] 9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img] After the patch the pattern becomes normal: 9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img] 9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img] 9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img] 9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img] and the amount of requests sent to disk (could be calculated counting number of lines in the output of blktrace) is reduced about 2 times. Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest does his job well and real requests comes properly aligned (to page). Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-3-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: minimal bounce buffer alignmentDenis V. Lunev2015-05-222-1/+7
| | | | | | | | | | | | | | | | | | | | The patch introduces new concept: minimal memory alignment for bounce buffers. Original so called "optimal" value is actually minimal required value for aligment. It should be used for validation that the IOVec is properly aligned and bounce buffer is not required. Though, from the performance point of view, it would be better if bounce buffer or IOVec allocated by QEMU will be aligned stricter. The patch does not change any alignment value yet. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1431441056-26198-2-git-send-email-den@openvz.org CC: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block: return EPERM on writes or discards to read-only devicesPaolo Bonzini2015-05-221-2/+2
| | | | | | | | | | | | | | | | | This is the behavior in the operating system, for example Linux's blkdev_write_iter has the following: if (bdev_read_only(I_BDEV(bd_inode))) return -EPERM; This does not apply to opening a device for read/write, when the device only supports read-only operation. In this case any of EACCES, EPERM or EROFS is acceptable depending on why writing is not possible. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1431013548-22492-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: improve image writing performance furtherDenis V. Lunev2015-05-221-20/+23
| | | | | | | | | | | | | | | | | Try to perform IO for the biggest continuous block possible. All blocks abscent in the image are accounted in the same type and preallocation is made for all of them at once. The performance for sequential write is increased from 200 Mb/sec to 235 Mb/sec on my SSD HDD. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-28-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: optimize linear image expansionDenis V. Lunev2015-05-221-10/+32
| | | | | | | | | | | | | | | | | | | | | | | | Plain image expansion spends a lot of time to update image file size. This seriously affects the performance. The following simple test qemu_img create -f parallels -o cluster_size=64k ./1.hds 64G qemu_io -n -c "write -P 0x11 0 1024M" ./1.hds could be improved if the format driver will pre-allocate some space in the image file with a reasonable chunk. This patch preallocates 128 Mb using bdrv_write_zeroes, which should normally use fallocate() call inside. Fallback to older truncate() could be used as a fallback using image open options thanks to the previous patch. The benefit is around 15%. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Karan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-27-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: add prealloc-mode and prealloc-size open paramemetsDenis V. Lunev2015-05-221-6/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is preparational commit for tweaks in Parallels image expansion. The idea is that enlarge via truncate by one data block is slow. It would be much better to use fallocate via bdrv_write_zeroes and expand by some significant amount at once. Original idea with sequential file writing to the end of the file without fallocate/truncate would be slower than this approach if the image is expanded with several operations: - each image expanding means file metadata update, i.e. filesystem journal write. Truncate/write to newly truncated space update file metadata twice thus truncate removal helps. With fallocate call inside bdrv_write_zeroes file metadata is updated only once and this should happen infrequently thus this approach is the best one for the image expansion - tail writes are ordered, i.e. the guest IO queue could not be sent immediately to the host introducing additional IO delays This patch just adds proper parameters into BDRVParallelsState and performs options parsing in parallels_open. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-26-git-send-email-den@openvz.org CC: Roman Kagan <rkagan@parallels.com> CC: Kevin Wolf <kwolf@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: delay writing to BAT till bdrv_co_flush_to_osDenis V. Lunev2015-05-221-6/+44
| | | | | | | | | | | | | | | | | | | | | | | | The idea is that we do not need to immediately sync BAT to the image as from the guest point of view there is a possibility that IO is lost even in the physical controller until flush command was finished. bdrv_co_flush_to_os is exactly the right place for this purpose. Technically the patch uses loaded BAT data as a cache and performs actual on-disk metadata updates in parallels_co_flush_to_os callback. This patch speed ups qemu-img create -f parallels -o cluster_size=64k ./1.hds 64G qemu-io -f parallels -c "write -P 0x11 0 1024k" 1.hds writing from 50-60 Mb/sec to 80-90 Mb/sec on rotational media and from 160 Mb/sec to 190 Mb/sec on SSD disk. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-25-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: create bat_entry_off helperDenis V. Lunev2015-05-221-6/+9
| | | | | | | | | | | | calculate offset of the BAT entry in the image file. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-24-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: improve image reading performanceDenis V. Lunev2015-05-221-5/+31
| | | | | | | | | | | | | | Try to perform IO for the biggest continuous block possible. The performance for sequential read is increased from 220 Mb/sec to 360 Mb/sec for continous image on my SSD HDD. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-23-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* block/parallels: implement incorrect close detectionDenis V. Lunev2015-05-221-0/+50
| | | | | | | | | | | | | | | | | | | | | | | The software driver must set inuse field in Parallels header to 0x746F6E59 when the image is opened in read-write mode. The presence of this magic in the header on open forces image consistency check. There is an unfortunate trick here. We can not check for inuse in parallels_check as this will happen too late. It is possible to do that for simple check, but during the fix this would always report an error as the image was opened in BDRV_O_RDWR mode. Thus we save the flag in BDRVParallelsState for this. On the other hand, nothing should be done to clear inuse in parallels_check. Generic close will do the job right. Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Roman Kagan <rkagan@parallels.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Roman Kagan <rkagan@parallels.com> Message-id: 1430207220-24458-21-git-send-email-den@openvz.org CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
OpenPOWER on IntegriCloud