diff options
Diffstat (limited to 'src/qga/qapi-schema.json')
| -rw-r--r-- | src/qga/qapi-schema.json | 999 |
1 files changed, 999 insertions, 0 deletions
diff --git a/src/qga/qapi-schema.json b/src/qga/qapi-schema.json new file mode 100644 index 0000000..01c9ee4 --- /dev/null +++ b/src/qga/qapi-schema.json @@ -0,0 +1,999 @@ +# *-*- Mode: Python -*-* + +## +# +# General note concerning the use of guest agent interfaces: +# +# "unsupported" is a higher-level error than the errors that individual +# commands might document. The caller should always be prepared to receive +# QERR_UNSUPPORTED, even if the given command doesn't specify it, or doesn't +# document any failure mode at all. +# +## + +## +# @guest-sync-delimited: +# +# Echo back a unique integer value, and prepend to response a +# leading sentinel byte (0xFF) the client can check scan for. +# +# This is used by clients talking to the guest agent over the +# wire to ensure the stream is in sync and doesn't contain stale +# data from previous client. It must be issued upon initial +# connection, and after any client-side timeouts (including +# timeouts on receiving a response to this command). +# +# After issuing this request, all guest agent responses should be +# ignored until the response containing the unique integer value +# the client passed in is returned. Receival of the 0xFF sentinel +# byte must be handled as an indication that the client's +# lexer/tokenizer/parser state should be flushed/reset in +# preparation for reliably receiving the subsequent response. As +# an optimization, clients may opt to ignore all data until a +# sentinel value is receiving to avoid unnecessary processing of +# stale data. +# +# Similarly, clients should also precede this *request* +# with a 0xFF byte to make sure the guest agent flushes any +# partially read JSON data from a previous client connection. +# +# @id: randomly generated 64-bit integer +# +# Returns: The unique integer id passed in by the client +# +# Since: 1.1 +## +{ 'command': 'guest-sync-delimited', + 'data': { 'id': 'int' }, + 'returns': 'int' } + +## +# @guest-sync: +# +# Echo back a unique integer value +# +# This is used by clients talking to the guest agent over the +# wire to ensure the stream is in sync and doesn't contain stale +# data from previous client. All guest agent responses should be +# ignored until the provided unique integer value is returned, +# and it is up to the client to handle stale whole or +# partially-delivered JSON text in such a way that this response +# can be obtained. +# +# In cases where a partial stale response was previously +# received by the client, this cannot always be done reliably. +# One particular scenario being if qemu-ga responses are fed +# character-by-character into a JSON parser. In these situations, +# using guest-sync-delimited may be optimal. +# +# For clients that fetch responses line by line and convert them +# to JSON objects, guest-sync should be sufficient, but note that +# in cases where the channel is dirty some attempts at parsing the +# response may result in a parser error. +# +# Such clients should also precede this command +# with a 0xFF byte to make sure the guest agent flushes any +# partially read JSON data from a previous session. +# +# @id: randomly generated 64-bit integer +# +# Returns: The unique integer id passed in by the client +# +# Since: 0.15.0 +## +{ 'command': 'guest-sync', + 'data': { 'id': 'int' }, + 'returns': 'int' } + +## +# @guest-ping: +# +# Ping the guest agent, a non-error return implies success +# +# Since: 0.15.0 +## +{ 'command': 'guest-ping' } + +## +# @guest-get-time: +# +# Get the information about guest's System Time relative to +# the Epoch of 1970-01-01 in UTC. +# +# Returns: Time in nanoseconds. +# +# Since 1.5 +## +{ 'command': 'guest-get-time', + 'returns': 'int' } + +## +# @guest-set-time: +# +# Set guest time. +# +# When a guest is paused or migrated to a file then loaded +# from that file, the guest OS has no idea that there +# was a big gap in the time. Depending on how long the +# gap was, NTP might not be able to resynchronize the +# guest. +# +# This command tries to set guest's System Time to the +# given value, then sets the Hardware Clock (RTC) to the +# current System Time. This will make it easier for a guest +# to resynchronize without waiting for NTP. If no @time is +# specified, then the time to set is read from RTC. However, +# this may not be supported on all platforms (i.e. Windows). +# If that's the case users are advised to always pass a +# value. +# +# @time: #optional time of nanoseconds, relative to the Epoch +# of 1970-01-01 in UTC. +# +# Returns: Nothing on success. +# +# Since: 1.5 +## +{ 'command': 'guest-set-time', + 'data': { '*time': 'int' } } + +## +# @GuestAgentCommandInfo: +# +# Information about guest agent commands. +# +# @name: name of the command +# +# @enabled: whether command is currently enabled by guest admin +# +# @success-response: whether command returns a response on success +# (since 1.7) +# +# Since 1.1.0 +## +{ 'struct': 'GuestAgentCommandInfo', + 'data': { 'name': 'str', 'enabled': 'bool', 'success-response': 'bool' } } + +## +# @GuestAgentInfo +# +# Information about guest agent. +# +# @version: guest agent version +# +# @supported_commands: Information about guest agent commands +# +# Since 0.15.0 +## +{ 'struct': 'GuestAgentInfo', + 'data': { 'version': 'str', + 'supported_commands': ['GuestAgentCommandInfo'] } } +## +# @guest-info: +# +# Get some information about the guest agent. +# +# Returns: @GuestAgentInfo +# +# Since: 0.15.0 +## +{ 'command': 'guest-info', + 'returns': 'GuestAgentInfo' } + +## +# @guest-shutdown: +# +# Initiate guest-activated shutdown. Note: this is an asynchronous +# shutdown request, with no guarantee of successful shutdown. +# +# @mode: #optional "halt", "powerdown" (default), or "reboot" +# +# This command does NOT return a response on success. Success condition +# is indicated by the VM exiting with a zero exit status or, when +# running with --no-shutdown, by issuing the query-status QMP command +# to confirm the VM status is "shutdown". +# +# Since: 0.15.0 +## +{ 'command': 'guest-shutdown', 'data': { '*mode': 'str' }, + 'success-response': false } + +## +# @guest-file-open: +# +# Open a file in the guest and retrieve a file handle for it +# +# @filepath: Full path to the file in the guest to open. +# +# @mode: #optional open mode, as per fopen(), "r" is the default. +# +# Returns: Guest file handle on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-open', + 'data': { 'path': 'str', '*mode': 'str' }, + 'returns': 'int' } + +## +# @guest-file-close: +# +# Close an open file in the guest +# +# @handle: filehandle returned by guest-file-open +# +# Returns: Nothing on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-close', + 'data': { 'handle': 'int' } } + +## +# @GuestFileRead +# +# Result of guest agent file-read operation +# +# @count: number of bytes read (note: count is *before* +# base64-encoding is applied) +# +# @buf-b64: base64-encoded bytes read +# +# @eof: whether EOF was encountered during read operation. +# +# Since: 0.15.0 +## +{ 'struct': 'GuestFileRead', + 'data': { 'count': 'int', 'buf-b64': 'str', 'eof': 'bool' } } + +## +# @guest-file-read: +# +# Read from an open file in the guest. Data will be base64-encoded +# +# @handle: filehandle returned by guest-file-open +# +# @count: #optional maximum number of bytes to read (default is 4KB) +# +# Returns: @GuestFileRead on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-read', + 'data': { 'handle': 'int', '*count': 'int' }, + 'returns': 'GuestFileRead' } + +## +# @GuestFileWrite +# +# Result of guest agent file-write operation +# +# @count: number of bytes written (note: count is actual bytes +# written, after base64-decoding of provided buffer) +# +# @eof: whether EOF was encountered during write operation. +# +# Since: 0.15.0 +## +{ 'struct': 'GuestFileWrite', + 'data': { 'count': 'int', 'eof': 'bool' } } + +## +# @guest-file-write: +# +# Write to an open file in the guest. +# +# @handle: filehandle returned by guest-file-open +# +# @buf-b64: base64-encoded string representing data to be written +# +# @count: #optional bytes to write (actual bytes, after base64-decode), +# default is all content in buf-b64 buffer after base64 decoding +# +# Returns: @GuestFileWrite on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-write', + 'data': { 'handle': 'int', 'buf-b64': 'str', '*count': 'int' }, + 'returns': 'GuestFileWrite' } + + +## +# @GuestFileSeek +# +# Result of guest agent file-seek operation +# +# @position: current file position +# +# @eof: whether EOF was encountered during file seek +# +# Since: 0.15.0 +## +{ 'struct': 'GuestFileSeek', + 'data': { 'position': 'int', 'eof': 'bool' } } + +## +# @guest-file-seek: +# +# Seek to a position in the file, as with fseek(), and return the +# current file position afterward. Also encapsulates ftell()'s +# functionality, with offset=0 and whence=1. +# +# @handle: filehandle returned by guest-file-open +# +# @offset: bytes to skip over in the file stream +# +# @whence: 0 for SEEK_SET, 1 for SEEK_CUR, or 2 for SEEK_END +# +# Returns: @GuestFileSeek on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-seek', + 'data': { 'handle': 'int', 'offset': 'int', 'whence': 'int' }, + 'returns': 'GuestFileSeek' } + +## +# @guest-file-flush: +# +# Write file changes bufferred in userspace to disk/kernel buffers +# +# @handle: filehandle returned by guest-file-open +# +# Returns: Nothing on success. +# +# Since: 0.15.0 +## +{ 'command': 'guest-file-flush', + 'data': { 'handle': 'int' } } + +## +# @GuestFsFreezeStatus +# +# An enumeration of filesystem freeze states +# +# @thawed: filesystems thawed/unfrozen +# +# @frozen: all non-network guest filesystems frozen +# +# Since: 0.15.0 +## +{ 'enum': 'GuestFsfreezeStatus', + 'data': [ 'thawed', 'frozen' ] } + +## +# @guest-fsfreeze-status: +# +# Get guest fsfreeze state. error state indicates +# +# Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined below) +# +# Note: This may fail to properly report the current state as a result of +# some other guest processes having issued an fs freeze/thaw. +# +# Since: 0.15.0 +## +{ 'command': 'guest-fsfreeze-status', + 'returns': 'GuestFsfreezeStatus' } + +## +# @guest-fsfreeze-freeze: +# +# Sync and freeze all freezable, local guest filesystems +# +# Returns: Number of file systems currently frozen. On error, all filesystems +# will be thawed. +# +# Since: 0.15.0 +## +{ 'command': 'guest-fsfreeze-freeze', + 'returns': 'int' } + +## +# @guest-fsfreeze-freeze-list: +# +# Sync and freeze specified guest filesystems +# +# @mountpoints: #optional an array of mountpoints of filesystems to be frozen. +# If omitted, every mounted filesystem is frozen. +# +# Returns: Number of file systems currently frozen. On error, all filesystems +# will be thawed. +# +# Since: 2.2 +## +{ 'command': 'guest-fsfreeze-freeze-list', + 'data': { '*mountpoints': ['str'] }, + 'returns': 'int' } + +## +# @guest-fsfreeze-thaw: +# +# Unfreeze all frozen guest filesystems +# +# Returns: Number of file systems thawed by this call +# +# Note: if return value does not match the previous call to +# guest-fsfreeze-freeze, this likely means some freezable +# filesystems were unfrozen before this call, and that the +# filesystem state may have changed before issuing this +# command. +# +# Since: 0.15.0 +## +{ 'command': 'guest-fsfreeze-thaw', + 'returns': 'int' } + +## +# @GuestFilesystemTrimResult +# +# @path: path that was trimmed +# @error: an error message when trim failed +# @trimmed: bytes trimmed for this path +# @minimum: reported effective minimum for this path +# +# Since: 2.4 +## +{ 'struct': 'GuestFilesystemTrimResult', + 'data': {'path': 'str', + '*trimmed': 'int', '*minimum': 'int', '*error': 'str'} } + +## +# @GuestFilesystemTrimResponse +# +# @paths: list of @GuestFilesystemTrimResult per path that was trimmed +# +# Since: 2.4 +## +{ 'struct': 'GuestFilesystemTrimResponse', + 'data': {'paths': ['GuestFilesystemTrimResult']} } + +## +# @guest-fstrim: +# +# Discard (or "trim") blocks which are not in use by the filesystem. +# +# @minimum: +# Minimum contiguous free range to discard, in bytes. Free ranges +# smaller than this may be ignored (this is a hint and the guest +# may not respect it). By increasing this value, the fstrim +# operation will complete more quickly for filesystems with badly +# fragmented free space, although not all blocks will be discarded. +# The default value is zero, meaning "discard every free block". +# +# Returns: A @GuestFilesystemTrimResponse which contains the +# status of all trimmed paths. (since 2.4) +# +# Since: 1.2 +## +{ 'command': 'guest-fstrim', + 'data': { '*minimum': 'int' }, + 'returns': 'GuestFilesystemTrimResponse' } + +## +# @guest-suspend-disk +# +# Suspend guest to disk. +# +# This command tries to execute the scripts provided by the pm-utils package. +# If it's not available, the suspend operation will be performed by manually +# writing to a sysfs file. +# +# For the best results it's strongly recommended to have the pm-utils +# package installed in the guest. +# +# This command does NOT return a response on success. There is a high chance +# the command succeeded if the VM exits with a zero exit status or, when +# running with --no-shutdown, by issuing the query-status QMP command to +# to confirm the VM status is "shutdown". However, the VM could also exit +# (or set its status to "shutdown") due to other reasons. +# +# The following errors may be returned: +# If suspend to disk is not supported, Unsupported +# +# Notes: It's strongly recommended to issue the guest-sync command before +# sending commands when the guest resumes +# +# Since: 1.1 +## +{ 'command': 'guest-suspend-disk', 'success-response': false } + +## +# @guest-suspend-ram +# +# Suspend guest to ram. +# +# This command tries to execute the scripts provided by the pm-utils package. +# If it's not available, the suspend operation will be performed by manually +# writing to a sysfs file. +# +# For the best results it's strongly recommended to have the pm-utils +# package installed in the guest. +# +# IMPORTANT: guest-suspend-ram requires QEMU to support the 'system_wakeup' +# command. Thus, it's *required* to query QEMU for the presence of the +# 'system_wakeup' command before issuing guest-suspend-ram. +# +# This command does NOT return a response on success. There are two options +# to check for success: +# 1. Wait for the SUSPEND QMP event from QEMU +# 2. Issue the query-status QMP command to confirm the VM status is +# "suspended" +# +# The following errors may be returned: +# If suspend to ram is not supported, Unsupported +# +# Notes: It's strongly recommended to issue the guest-sync command before +# sending commands when the guest resumes +# +# Since: 1.1 +## +{ 'command': 'guest-suspend-ram', 'success-response': false } + +## +# @guest-suspend-hybrid +# +# Save guest state to disk and suspend to ram. +# +# This command requires the pm-utils package to be installed in the guest. +# +# IMPORTANT: guest-suspend-hybrid requires QEMU to support the 'system_wakeup' +# command. Thus, it's *required* to query QEMU for the presence of the +# 'system_wakeup' command before issuing guest-suspend-hybrid. +# +# This command does NOT return a response on success. There are two options +# to check for success: +# 1. Wait for the SUSPEND QMP event from QEMU +# 2. Issue the query-status QMP command to confirm the VM status is +# "suspended" +# +# The following errors may be returned: +# If hybrid suspend is not supported, Unsupported +# +# Notes: It's strongly recommended to issue the guest-sync command before +# sending commands when the guest resumes +# +# Since: 1.1 +## +{ 'command': 'guest-suspend-hybrid', 'success-response': false } + +## +# @GuestIpAddressType: +# +# An enumeration of supported IP address types +# +# @ipv4: IP version 4 +# +# @ipv6: IP version 6 +# +# Since: 1.1 +## +{ 'enum': 'GuestIpAddressType', + 'data': [ 'ipv4', 'ipv6' ] } + +## +# @GuestIpAddress: +# +# @ip-address: IP address +# +# @ip-address-type: Type of @ip-address (e.g. ipv4, ipv6) +# +# @prefix: Network prefix length of @ip-address +# +# Since: 1.1 +## +{ 'struct': 'GuestIpAddress', + 'data': {'ip-address': 'str', + 'ip-address-type': 'GuestIpAddressType', + 'prefix': 'int'} } + +## +# @GuestNetworkInterface: +# +# @name: The name of interface for which info are being delivered +# +# @hardware-address: Hardware address of @name +# +# @ip-addresses: List of addresses assigned to @name +# +# Since: 1.1 +## +{ 'struct': 'GuestNetworkInterface', + 'data': {'name': 'str', + '*hardware-address': 'str', + '*ip-addresses': ['GuestIpAddress'] } } + +## +# @guest-network-get-interfaces: +# +# Get list of guest IP addresses, MAC addresses +# and netmasks. +# +# Returns: List of GuestNetworkInfo on success. +# +# Since: 1.1 +## +{ 'command': 'guest-network-get-interfaces', + 'returns': ['GuestNetworkInterface'] } + +## +# @GuestLogicalProcessor: +# +# @logical-id: Arbitrary guest-specific unique identifier of the VCPU. +# +# @online: Whether the VCPU is enabled. +# +# @can-offline: #optional Whether offlining the VCPU is possible. This member +# is always filled in by the guest agent when the structure is +# returned, and always ignored on input (hence it can be omitted +# then). +# +# Since: 1.5 +## +{ 'struct': 'GuestLogicalProcessor', + 'data': {'logical-id': 'int', + 'online': 'bool', + '*can-offline': 'bool'} } + +## +# @guest-get-vcpus: +# +# Retrieve the list of the guest's logical processors. +# +# This is a read-only operation. +# +# Returns: The list of all VCPUs the guest knows about. Each VCPU is put on the +# list exactly once, but their order is unspecified. +# +# Since: 1.5 +## +{ 'command': 'guest-get-vcpus', + 'returns': ['GuestLogicalProcessor'] } + +## +# @guest-set-vcpus: +# +# Attempt to reconfigure (currently: enable/disable) logical processors inside +# the guest. +# +# The input list is processed node by node in order. In each node @logical-id +# is used to look up the guest VCPU, for which @online specifies the requested +# state. The set of distinct @logical-id's is only required to be a subset of +# the guest-supported identifiers. There's no restriction on list length or on +# repeating the same @logical-id (with possibly different @online field). +# Preferably the input list should describe a modified subset of +# @guest-get-vcpus' return value. +# +# Returns: The length of the initial sublist that has been successfully +# processed. The guest agent maximizes this value. Possible cases: +# +# 0: if the @vcpus list was empty on input. Guest state +# has not been changed. Otherwise, +# +# Error: processing the first node of @vcpus failed for the +# reason returned. Guest state has not been changed. +# Otherwise, +# +# < length(@vcpus): more than zero initial nodes have been processed, +# but not the entire @vcpus list. Guest state has +# changed accordingly. To retrieve the error +# (assuming it persists), repeat the call with the +# successfully processed initial sublist removed. +# Otherwise, +# +# length(@vcpus): call successful. +# +# Since: 1.5 +## +{ 'command': 'guest-set-vcpus', + 'data': {'vcpus': ['GuestLogicalProcessor'] }, + 'returns': 'int' } + +## +# @GuestDiskBusType +# +# An enumeration of bus type of disks +# +# @ide: IDE disks +# @fdc: floppy disks +# @scsi: SCSI disks +# @virtio: virtio disks +# @xen: Xen disks +# @usb: USB disks +# @uml: UML disks +# @sata: SATA disks +# @sd: SD cards +# @unknown: Unknown bus type +# @ieee1394: Win IEEE 1394 bus type +# @ssa: Win SSA bus type +# @fibre: Win fiber channel bus type +# @raid: Win RAID bus type +# @iscsi: Win iScsi bus type +# @sas: Win serial-attaches SCSI bus type +# @mmc: Win multimedia card (MMC) bus type +# @virtual: Win virtual bus type +# @file-backed virtual: Win file-backed bus type +# +# Since: 2.2; 'Unknown' and all entries below since 2.4 +## +{ 'enum': 'GuestDiskBusType', + 'data': [ 'ide', 'fdc', 'scsi', 'virtio', 'xen', 'usb', 'uml', 'sata', + 'sd', 'unknown', 'ieee1394', 'ssa', 'fibre', 'raid', 'iscsi', + 'sas', 'mmc', 'virtual', 'file-backed-virtual' ] } + + +## +# @GuestPCIAddress: +# +# @domain: domain id +# @bus: bus id +# @slot: slot id +# @function: function id +# +# Since: 2.2 +## +{ 'struct': 'GuestPCIAddress', + 'data': {'domain': 'int', 'bus': 'int', + 'slot': 'int', 'function': 'int'} } + +## +# @GuestDiskAddress: +# +# @pci-controller: controller's PCI address +# @type: bus type +# @bus: bus id +# @target: target id +# @unit: unit id +# +# Since: 2.2 +## +{ 'struct': 'GuestDiskAddress', + 'data': {'pci-controller': 'GuestPCIAddress', + 'bus-type': 'GuestDiskBusType', + 'bus': 'int', 'target': 'int', 'unit': 'int'} } + +## +# @GuestFilesystemInfo +# +# @name: disk name +# @mountpoint: mount point path +# @type: file system type string +# @disk: an array of disk hardware information that the volume lies on, +# which may be empty if the disk type is not supported +# +# Since: 2.2 +## +{ 'struct': 'GuestFilesystemInfo', + 'data': {'name': 'str', 'mountpoint': 'str', 'type': 'str', + 'disk': ['GuestDiskAddress']} } + +## +# @guest-get-fsinfo: +# +# Returns: The list of filesystems information mounted in the guest. +# The returned mountpoints may be specified to +# @guest-fsfreeze-freeze-list. +# Network filesystems (such as CIFS and NFS) are not listed. +# +# Since: 2.2 +## +{ 'command': 'guest-get-fsinfo', + 'returns': ['GuestFilesystemInfo'] } + +## +# @guest-set-user-password +# +# @username: the user account whose password to change +# @password: the new password entry string, base64 encoded +# @crypted: true if password is already crypt()d, false if raw +# +# If the @crypted flag is true, it is the caller's responsibility +# to ensure the correct crypt() encryption scheme is used. This +# command does not attempt to interpret or report on the encryption +# scheme. Refer to the documentation of the guest operating system +# in question to determine what is supported. +# +# Not all guest operating systems will support use of the +# @crypted flag, as they may require the clear-text password +# +# The @password parameter must always be base64 encoded before +# transmission, even if already crypt()d, to ensure it is 8-bit +# safe when passed as JSON. +# +# Returns: Nothing on success. +# +# Since 2.3 +## +{ 'command': 'guest-set-user-password', + 'data': { 'username': 'str', 'password': 'str', 'crypted': 'bool' } } + +# @GuestMemoryBlock: +# +# @phys-index: Arbitrary guest-specific unique identifier of the MEMORY BLOCK. +# +# @online: Whether the MEMORY BLOCK is enabled in guest. +# +# @can-offline: #optional Whether offlining the MEMORY BLOCK is possible. +# This member is always filled in by the guest agent when the +# structure is returned, and always ignored on input (hence it +# can be omitted then). +# +# Since: 2.3 +## +{ 'struct': 'GuestMemoryBlock', + 'data': {'phys-index': 'uint64', + 'online': 'bool', + '*can-offline': 'bool'} } + +## +# @guest-get-memory-blocks: +# +# Retrieve the list of the guest's memory blocks. +# +# This is a read-only operation. +# +# Returns: The list of all memory blocks the guest knows about. +# Each memory block is put on the list exactly once, but their order +# is unspecified. +# +# Since: 2.3 +## +{ 'command': 'guest-get-memory-blocks', + 'returns': ['GuestMemoryBlock'] } + +## +# @GuestMemoryBlockResponseType +# +# An enumeration of memory block operation result. +# +# @success: the operation of online/offline memory block is successful. +# @not-found: can't find the corresponding memoryXXX directory in sysfs. +# @operation-not-supported: for some old kernels, it does not support +# online or offline memory block. +# @operation-failed: the operation of online/offline memory block fails, +# because of some errors happen. +# +# Since: 2.3 +## +{ 'enum': 'GuestMemoryBlockResponseType', + 'data': ['success', 'not-found', 'operation-not-supported', + 'operation-failed'] } + +## +# @GuestMemoryBlockResponse: +# +# @phys-index: same with the 'phys-index' member of @GuestMemoryBlock. +# +# @response: the result of memory block operation. +# +# @error-code: #optional the error number. +# When memory block operation fails, we assign the value of +# 'errno' to this member, it indicates what goes wrong. +# When the operation succeeds, it will be omitted. +# +# Since: 2.3 +## +{ 'struct': 'GuestMemoryBlockResponse', + 'data': { 'phys-index': 'uint64', + 'response': 'GuestMemoryBlockResponseType', + '*error-code': 'int' }} + +## +# @guest-set-memory-blocks: +# +# Attempt to reconfigure (currently: enable/disable) state of memory blocks +# inside the guest. +# +# The input list is processed node by node in order. In each node @phys-index +# is used to look up the guest MEMORY BLOCK, for which @online specifies the +# requested state. The set of distinct @phys-index's is only required to be a +# subset of the guest-supported identifiers. There's no restriction on list +# length or on repeating the same @phys-index (with possibly different @online +# field). +# Preferably the input list should describe a modified subset of +# @guest-get-memory-blocks' return value. +# +# Returns: The operation results, it is a list of @GuestMemoryBlockResponse, +# which is corresponding to the input list. +# +# Note: it will return NULL if the @mem-blks list was empty on input, +# or there is an error, and in this case, guest state will not be +# changed. +# +# Since: 2.3 +## +{ 'command': 'guest-set-memory-blocks', + 'data': {'mem-blks': ['GuestMemoryBlock'] }, + 'returns': ['GuestMemoryBlockResponse'] } + +# @GuestMemoryBlockInfo: +# +# @size: the size (in bytes) of the guest memory blocks, +# which are the minimal units of memory block online/offline +# operations (also called Logical Memory Hotplug). +# +# Since: 2.3 +## +{ 'struct': 'GuestMemoryBlockInfo', + 'data': {'size': 'uint64'} } + +## +# @guest-get-memory-block-info: +# +# Get information relating to guest memory blocks. +# +# Returns: memory block size in bytes. +# Returns: @GuestMemoryBlockInfo +# +# Since 2.3 +## +{ 'command': 'guest-get-memory-block-info', + 'returns': 'GuestMemoryBlockInfo' } + +# @GuestExecStatus: +# +# @exited: true if process has already terminated. +# @exitcode: #optional process exit code if it was normally terminated. +# @signal: #optional signal number (linux) or unhandled exception code +# (windows) if the process was abnormally terminated. +# @out-data: #optional base64-encoded stdout of the process +# @err-data: #optional base64-encoded stderr of the process +# Note: @out-data and @err-data are present only +# if 'capture-output' was specified for 'guest-exec' +# @out-truncated: #optional true if stdout was not fully captured +# due to size limitation. +# @err-truncated: #optional true if stderr was not fully captured +# due to size limitation. +# +# Since: 2.5 +## +{ 'struct': 'GuestExecStatus', + 'data': { 'exited': 'bool', '*exitcode': 'int', '*signal': 'int', + '*out-data': 'str', '*err-data': 'str', + '*out-truncated': 'bool', '*err-truncated': 'bool' }} +## +# @guest-exec-status +# +# Check status of process associated with PID retrieved via guest-exec. +# Reap the process and associated metadata if it has exited. +# +# @pid: pid returned from guest-exec +# +# Returns: GuestExecStatus on success. +# +# Since 2.5 +## +{ 'command': 'guest-exec-status', + 'data': { 'pid': 'int' }, + 'returns': 'GuestExecStatus' } + +## +# @GuestExec: +# @pid: pid of child process in guest OS +# +#Since: 2.5 +## +{ 'struct': 'GuestExec', + 'data': { 'pid': 'int'} } + +## +# @guest-exec: +# +# Execute a command in the guest +# +# @path: path or executable name to execute +# @arg: #optional argument list to pass to executable +# @env: #optional environment variables to pass to executable +# @input-data: #optional data to be passed to process stdin (base64 encoded) +# @capture-output: #optional bool flag to enable capture of +# stdout/stderr of running process. defaults to false. +# +# Returns: PID on success. +# +# Since: 2.5 +## +{ 'command': 'guest-exec', + 'data': { 'path': 'str', '*arg': ['str'], '*env': ['str'], + '*input-data': 'str', '*capture-output': 'bool' }, + 'returns': 'GuestExec' } |
