diff options
Diffstat (limited to 'src/include/hw/sd/sdhci.h')
| -rw-r--r-- | src/include/hw/sd/sdhci.h | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/src/include/hw/sd/sdhci.h b/src/include/hw/sd/sdhci.h new file mode 100644 index 0000000..e78d938 --- /dev/null +++ b/src/include/hw/sd/sdhci.h @@ -0,0 +1,94 @@ +/* + * SD Association Host Standard Specification v2.0 controller emulation + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Mitsyanko Igor <i.mitsyanko@samsung.com> + * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> + * + * Based on MMC controller for Samsung S5PC1xx-based board emulation + * by Alexey Merkulov and Vladimir Monakhov. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU _General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef SDHCI_H +#define SDHCI_H + +#include "qemu-common.h" +#include "hw/block/block.h" +#include "hw/pci/pci.h" +#include "hw/sysbus.h" +#include "hw/sd/sd.h" + +/* SD/MMC host controller state */ +typedef struct SDHCIState { + union { + PCIDevice pcidev; + SysBusDevice busdev; + }; + SDState *card; + MemoryRegion iomem; + BlockBackend *blk; + + QEMUTimer *insert_timer; /* timer for 'changing' sd card. */ + QEMUTimer *transfer_timer; + qemu_irq eject_cb; + qemu_irq ro_cb; + qemu_irq irq; + + uint32_t sdmasysad; /* SDMA System Address register */ + uint16_t blksize; /* Host DMA Buff Boundary and Transfer BlkSize Reg */ + uint16_t blkcnt; /* Blocks count for current transfer */ + uint32_t argument; /* Command Argument Register */ + uint16_t trnmod; /* Transfer Mode Setting Register */ + uint16_t cmdreg; /* Command Register */ + uint32_t rspreg[4]; /* Response Registers 0-3 */ + uint32_t prnsts; /* Present State Register */ + uint8_t hostctl; /* Host Control Register */ + uint8_t pwrcon; /* Power control Register */ + uint8_t blkgap; /* Block Gap Control Register */ + uint8_t wakcon; /* WakeUp Control Register */ + uint16_t clkcon; /* Clock control Register */ + uint8_t timeoutcon; /* Timeout Control Register */ + uint8_t admaerr; /* ADMA Error Status Register */ + uint16_t norintsts; /* Normal Interrupt Status Register */ + uint16_t errintsts; /* Error Interrupt Status Register */ + uint16_t norintstsen; /* Normal Interrupt Status Enable Register */ + uint16_t errintstsen; /* Error Interrupt Status Enable Register */ + uint16_t norintsigen; /* Normal Interrupt Signal Enable Register */ + uint16_t errintsigen; /* Error Interrupt Signal Enable Register */ + uint16_t acmd12errsts; /* Auto CMD12 error status register */ + uint64_t admasysaddr; /* ADMA System Address Register */ + + uint32_t capareg; /* Capabilities Register */ + uint32_t maxcurr; /* Maximum Current Capabilities Register */ + uint8_t *fifo_buffer; /* SD host i/o FIFO buffer */ + uint32_t buf_maxsz; + uint16_t data_count; /* current element in FIFO buffer */ + uint8_t stopped_state;/* Current SDHC state */ + /* Buffer Data Port Register - virtual access point to R and W buffers */ + /* Software Reset Register - always reads as 0 */ + /* Force Event Auto CMD12 Error Interrupt Reg - write only */ + /* Force Event Error Interrupt Register- write only */ + /* RO Host Controller Version Register always reads as 0x2401 */ +} SDHCIState; + +#define TYPE_PCI_SDHCI "sdhci-pci" +#define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI) + +#define TYPE_SYSBUS_SDHCI "generic-sdhci" +#define SYSBUS_SDHCI(obj) \ + OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI) + +#endif /* SDHCI_H */ |
