diff options
Diffstat (limited to 'src/hw/ide/ahci.h')
| -rw-r--r-- | src/hw/ide/ahci.h | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/src/hw/ide/ahci.h b/src/hw/ide/ahci.h new file mode 100644 index 0000000..bc777ed --- /dev/null +++ b/src/hw/ide/ahci.h @@ -0,0 +1,405 @@ +/* + * QEMU AHCI Emulation + * + * Copyright (c) 2010 qiaochong@loongson.cn + * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com> + * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de> + * Copyright (c) 2010 Alexander Graf <agraf@suse.de> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef HW_IDE_AHCI_H +#define HW_IDE_AHCI_H + +#include <hw/sysbus.h> + +#define AHCI_MEM_BAR_SIZE 0x1000 +#define AHCI_MAX_PORTS 32 +#define AHCI_MAX_SG 168 /* hardware max is 64K */ +#define AHCI_DMA_BOUNDARY 0xffffffff +#define AHCI_USE_CLUSTERING 0 +#define AHCI_MAX_CMDS 32 +#define AHCI_CMD_SZ 32 +#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) +#define AHCI_RX_FIS_SZ 256 +#define AHCI_CMD_TBL_CDB 0x40 +#define AHCI_CMD_TBL_HDR_SZ 0x80 +#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) +#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) +#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ + AHCI_RX_FIS_SZ) + +#define AHCI_IRQ_ON_SG (1U << 31) +#define AHCI_CMD_ATAPI (1 << 5) +#define AHCI_CMD_WRITE (1 << 6) +#define AHCI_CMD_PREFETCH (1 << 7) +#define AHCI_CMD_RESET (1 << 8) +#define AHCI_CMD_CLR_BUSY (1 << 10) + +#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ +#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ +#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ + +/* global controller registers */ +#define HOST_CAP 0x00 /* host capabilities */ +#define HOST_CTL 0x04 /* global host control */ +#define HOST_IRQ_STAT 0x08 /* interrupt status */ +#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ +#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ + +/* HOST_CTL bits */ +#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ +#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ +#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */ + +/* HOST_CAP bits */ +#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ +#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ +#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ +#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ +#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ +#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */ + +/* registers for each SATA port */ +#define PORT_LST_ADDR 0x00 /* command list DMA addr */ +#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ +#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ +#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ +#define PORT_IRQ_STAT 0x10 /* interrupt status */ +#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ +#define PORT_CMD 0x18 /* port command */ +#define PORT_TFDATA 0x20 /* taskfile data */ +#define PORT_SIG 0x24 /* device TF signature */ +#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ +#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ +#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ +#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ +#define PORT_CMD_ISSUE 0x38 /* command issue */ +#define PORT_RESERVED 0x3c /* reserved */ + +/* PORT_IRQ_{STAT,MASK} bits */ +#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */ +#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ +#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ +#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ +#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ +#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ +#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ +#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ + +#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ +#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ +#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ +#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ +#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ +#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ +#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ +#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ +#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ + +#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ + PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ + PORT_IRQ_UNK_FIS) +#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ + PORT_IRQ_HBUS_DATA_ERR) +#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) + +/* PORT_CMD bits */ +#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ +#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ +#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ +#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ +#define PORT_CMD_CLO (1 << 3) /* Command list override */ +#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ +#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ +#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ + +#define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */ +#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ +#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ +#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ + +#define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */ + +/* ap->flags bits */ +#define AHCI_FLAG_NO_NCQ (1 << 24) +#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ +#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ +#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ +#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ + +#define ATA_SRST (1 << 2) /* software reset */ + +#define STATE_RUN 0 +#define STATE_RESET 1 + +#define SATA_SCR_SSTATUS_DET_NODEV 0x0 +#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 + +#define SATA_SCR_SSTATUS_SPD_NODEV 0x00 +#define SATA_SCR_SSTATUS_SPD_GEN1 0x10 + +#define SATA_SCR_SSTATUS_IPM_NODEV 0x000 +#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 + +#define AHCI_SCR_SCTL_DET 0xf + +#define SATA_FIS_TYPE_REGISTER_H2D 0x27 +#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 +#define SATA_FIS_TYPE_REGISTER_D2H 0x34 +#define SATA_FIS_TYPE_PIO_SETUP 0x5f +#define SATA_FIS_TYPE_SDB 0xA1 + +#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f +#define AHCI_CMD_HDR_PRDT_LEN 16 + +#define SATA_SIGNATURE_CDROM 0xeb140101 +#define SATA_SIGNATURE_DISK 0x00000101 + +#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20 + /* Shouldn't this be 0x2c? */ + +#define AHCI_PORT_REGS_START_ADDR 0x100 +#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f +#define AHCI_PORT_ADDR_OFFSET_LEN 0x80 + +#define AHCI_NUM_COMMAND_SLOTS 31 +#define AHCI_SUPPORTED_SPEED 20 +#define AHCI_SUPPORTED_SPEED_GEN1 1 +#define AHCI_VERSION_1_0 0x10000 + +#define AHCI_PROGMODE_MAJOR_REV_1 1 + +#define AHCI_COMMAND_TABLE_ACMD 0x40 + +#define AHCI_PRDT_SIZE_MASK 0x3fffff + +#define IDE_FEATURE_DMA 1 + +#define READ_FPDMA_QUEUED 0x60 +#define WRITE_FPDMA_QUEUED 0x61 +#define NCQ_NON_DATA 0x63 +#define RECEIVE_FPDMA_QUEUED 0x65 +#define SEND_FPDMA_QUEUED 0x64 + +#define NCQ_FIS_FUA_MASK 0x80 +#define NCQ_FIS_RARC_MASK 0x01 + +#define RES_FIS_DSFIS 0x00 +#define RES_FIS_PSFIS 0x20 +#define RES_FIS_RFIS 0x40 +#define RES_FIS_SDBFIS 0x58 +#define RES_FIS_UFIS 0x60 + +#define SATA_CAP_SIZE 0x8 +#define SATA_CAP_REV 0x2 +#define SATA_CAP_BAR 0x4 + +typedef struct AHCIControlRegs { + uint32_t cap; + uint32_t ghc; + uint32_t irqstatus; + uint32_t impl; + uint32_t version; +} AHCIControlRegs; + +typedef struct AHCIPortRegs { + uint32_t lst_addr; + uint32_t lst_addr_hi; + uint32_t fis_addr; + uint32_t fis_addr_hi; + uint32_t irq_stat; + uint32_t irq_mask; + uint32_t cmd; + uint32_t unused0; + uint32_t tfdata; + uint32_t sig; + uint32_t scr_stat; + uint32_t scr_ctl; + uint32_t scr_err; + uint32_t scr_act; + uint32_t cmd_issue; + uint32_t reserved; +} AHCIPortRegs; + +typedef struct AHCICmdHdr { + uint16_t opts; + uint16_t prdtl; + uint32_t status; + uint64_t tbl_addr; + uint32_t reserved[4]; +} QEMU_PACKED AHCICmdHdr; + +typedef struct AHCI_SG { + uint64_t addr; + uint32_t reserved; + uint32_t flags_size; +} QEMU_PACKED AHCI_SG; + +typedef struct AHCIDevice AHCIDevice; + +typedef struct NCQTransferState { + AHCIDevice *drive; + BlockAIOCB *aiocb; + AHCICmdHdr *cmdh; + QEMUSGList sglist; + BlockAcctCookie acct; + uint32_t sector_count; + uint64_t lba; + uint8_t tag; + uint8_t cmd; + uint8_t slot; + bool used; + bool halt; +} NCQTransferState; + +struct AHCIDevice { + IDEDMA dma; + IDEBus port; + int port_no; + uint32_t port_state; + uint32_t finished; + AHCIPortRegs port_regs; + struct AHCIState *hba; + QEMUBH *check_bh; + uint8_t *lst; + uint8_t *res_fis; + bool done_atapi_packet; + int32_t busy_slot; + bool init_d2h_sent; + AHCICmdHdr *cur_cmd; + NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; +}; + +typedef struct AHCIState { + DeviceState *container; + + AHCIDevice *dev; + AHCIControlRegs control_regs; + MemoryRegion mem; + MemoryRegion idp; /* Index-Data Pair I/O port space */ + unsigned idp_offset; /* Offset of index in I/O port space */ + uint32_t idp_index; /* Current IDP index */ + int32_t ports; + qemu_irq irq; + AddressSpace *as; +} AHCIState; + +typedef struct AHCIPCIState { + /*< private >*/ + PCIDevice parent_obj; + /*< public >*/ + + AHCIState ahci; +} AHCIPCIState; + +#define TYPE_ICH9_AHCI "ich9-ahci" + +#define ICH_AHCI(obj) \ + OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI) + +extern const VMStateDescription vmstate_ahci; + +#define VMSTATE_AHCI(_field, _state) { \ + .name = (stringify(_field)), \ + .size = sizeof(AHCIState), \ + .vmsd = &vmstate_ahci, \ + .flags = VMS_STRUCT, \ + .offset = vmstate_offset_value(_state, _field, AHCIState), \ +} + +/** + * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2), + * but some fields have been re-mapped and re-purposed, as seen in + * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED") + * + * cmd_fis[3], feature 7:0, becomes sector count 7:0. + * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit. + * cmd_fis[11], feature 15:8, becomes sector count 15:8. + * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0) + * cmd_fis[13], count 15:8, becomes the priority value (7:6) + * bytes 16-19 become an le32 "auxiliary" field. + */ +typedef struct NCQFrame { + uint8_t fis_type; + uint8_t c; + uint8_t command; + uint8_t sector_count_low; /* (feature 7:0) */ + uint8_t lba0; + uint8_t lba1; + uint8_t lba2; + uint8_t fua; /* (device 7:0) */ + uint8_t lba3; + uint8_t lba4; + uint8_t lba5; + uint8_t sector_count_high; /* (feature 15:8) */ + uint8_t tag; /* (count 0:7) */ + uint8_t prio; /* (count 15:8) */ + uint8_t icc; + uint8_t control; + uint8_t aux0; + uint8_t aux1; + uint8_t aux2; + uint8_t aux3; +} QEMU_PACKED NCQFrame; + +typedef struct SDBFIS { + uint8_t type; + uint8_t flags; + uint8_t status; + uint8_t error; + uint32_t payload; +} QEMU_PACKED SDBFIS; + +void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports); +void ahci_init(AHCIState *s, DeviceState *qdev); +void ahci_uninit(AHCIState *s); + +void ahci_reset(AHCIState *s); + +void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd); + +#define TYPE_SYSBUS_AHCI "sysbus-ahci" +#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI) + +typedef struct SysbusAHCIState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + AHCIState ahci; + uint32_t num_ports; +} SysbusAHCIState; + +#define TYPE_ALLWINNER_AHCI "allwinner-ahci" +#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \ + TYPE_ALLWINNER_AHCI) + +#define ALLWINNER_AHCI_MMIO_OFF 0x80 +#define ALLWINNER_AHCI_MMIO_SIZE 0x80 + +struct AllwinnerAHCIState { + /*< private >*/ + SysbusAHCIState parent_obj; + /*< public >*/ + + MemoryRegion mmio; + uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4]; +}; + +#endif /* HW_IDE_AHCI_H */ |
