diff options
Diffstat (limited to 'hw/slavio_misc.c')
-rw-r--r-- | hw/slavio_misc.c | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/hw/slavio_misc.c b/hw/slavio_misc.c new file mode 100644 index 0000000..597a0cb --- /dev/null +++ b/hw/slavio_misc.c @@ -0,0 +1,240 @@ +/* + * QEMU Sparc SLAVIO aux io port emulation + * + * Copyright (c) 2005 Fabrice Bellard + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include "vl.h" +/* debug misc */ +//#define DEBUG_MISC + +/* + * This is the auxio port, chip control and system control part of + * chip STP2001 (Slave I/O), also produced as NCR89C105. See + * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt + * + * This also includes the PMC CPU idle controller. + */ + +#ifdef DEBUG_MISC +#define MISC_DPRINTF(fmt, args...) \ +do { printf("MISC: " fmt , ##args); } while (0) +#else +#define MISC_DPRINTF(fmt, args...) +#endif + +typedef struct MiscState { + int irq; + uint8_t config; + uint8_t aux1, aux2; + uint8_t diag, mctrl; +} MiscState; + +#define MISC_MAXADDR 1 + +static void slavio_misc_update_irq(void *opaque) +{ + MiscState *s = opaque; + + if ((s->aux2 & 0x4) && (s->config & 0x8)) { + pic_set_irq(s->irq, 1); + } else { + pic_set_irq(s->irq, 0); + } +} + +static void slavio_misc_reset(void *opaque) +{ + MiscState *s = opaque; + + // Diagnostic register not cleared in reset + s->config = s->aux1 = s->aux2 = s->mctrl = 0; +} + +void slavio_set_power_fail(void *opaque, int power_failing) +{ + MiscState *s = opaque; + + MISC_DPRINTF("Power fail: %d, config: %d\n", power_failing, s->config); + if (power_failing && (s->config & 0x8)) { + s->aux2 |= 0x4; + } else { + s->aux2 &= ~0x4; + } + slavio_misc_update_irq(s); +} + +static void slavio_misc_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val) +{ + MiscState *s = opaque; + + switch (addr & 0xfff0000) { + case 0x1800000: + MISC_DPRINTF("Write config %2.2x\n", val & 0xff); + s->config = val & 0xff; + slavio_misc_update_irq(s); + break; + case 0x1900000: + MISC_DPRINTF("Write aux1 %2.2x\n", val & 0xff); + s->aux1 = val & 0xff; + break; + case 0x1910000: + val &= 0x3; + MISC_DPRINTF("Write aux2 %2.2x\n", val); + val |= s->aux2 & 0x4; + if (val & 0x2) // Clear Power Fail int + val &= 0x1; + s->aux2 = val; + if (val & 1) + qemu_system_shutdown_request(); + slavio_misc_update_irq(s); + break; + case 0x1a00000: + MISC_DPRINTF("Write diag %2.2x\n", val & 0xff); + s->diag = val & 0xff; + break; + case 0x1b00000: + MISC_DPRINTF("Write modem control %2.2x\n", val & 0xff); + s->mctrl = val & 0xff; + break; + case 0x1f00000: + MISC_DPRINTF("Write system control %2.2x\n", val & 0xff); + if (val & 1) + qemu_system_reset_request(); + break; + case 0xa000000: + MISC_DPRINTF("Write power management %2.2x\n", val & 0xff); +#if 0 + // XXX: halting CPU does not work + raise_exception(EXCP_HLT); + cpu_loop_exit(); +#endif + break; + } +} + +static uint32_t slavio_misc_mem_readb(void *opaque, target_phys_addr_t addr) +{ + MiscState *s = opaque; + uint32_t ret = 0; + + switch (addr & 0xfff0000) { + case 0x1800000: + ret = s->config; + MISC_DPRINTF("Read config %2.2x\n", ret); + break; + case 0x1900000: + ret = s->aux1; + MISC_DPRINTF("Read aux1 %2.2x\n", ret); + break; + case 0x1910000: + ret = s->aux2; + MISC_DPRINTF("Read aux2 %2.2x\n", ret); + break; + case 0x1a00000: + ret = s->diag; + MISC_DPRINTF("Read diag %2.2x\n", ret); + break; + case 0x1b00000: + ret = s->mctrl; + MISC_DPRINTF("Read modem control %2.2x\n", ret); + break; + case 0x1f00000: + MISC_DPRINTF("Read system control %2.2x\n", ret); + break; + case 0xa000000: + MISC_DPRINTF("Read power management %2.2x\n", ret); + break; + } + return ret; +} + +static CPUReadMemoryFunc *slavio_misc_mem_read[3] = { + slavio_misc_mem_readb, + slavio_misc_mem_readb, + slavio_misc_mem_readb, +}; + +static CPUWriteMemoryFunc *slavio_misc_mem_write[3] = { + slavio_misc_mem_writeb, + slavio_misc_mem_writeb, + slavio_misc_mem_writeb, +}; + +static void slavio_misc_save(QEMUFile *f, void *opaque) +{ + MiscState *s = opaque; + + qemu_put_be32s(f, &s->irq); + qemu_put_8s(f, &s->config); + qemu_put_8s(f, &s->aux1); + qemu_put_8s(f, &s->aux2); + qemu_put_8s(f, &s->diag); + qemu_put_8s(f, &s->mctrl); +} + +static int slavio_misc_load(QEMUFile *f, void *opaque, int version_id) +{ + MiscState *s = opaque; + + if (version_id != 1) + return -EINVAL; + + qemu_get_be32s(f, &s->irq); + qemu_get_8s(f, &s->config); + qemu_get_8s(f, &s->aux1); + qemu_get_8s(f, &s->aux2); + qemu_get_8s(f, &s->diag); + qemu_get_8s(f, &s->mctrl); + return 0; +} + +void *slavio_misc_init(uint32_t base, int irq) +{ + int slavio_misc_io_memory; + MiscState *s; + + s = qemu_mallocz(sizeof(MiscState)); + if (!s) + return NULL; + + slavio_misc_io_memory = cpu_register_io_memory(0, slavio_misc_mem_read, slavio_misc_mem_write, s); + // Slavio control + cpu_register_physical_memory(base + 0x1800000, MISC_MAXADDR, slavio_misc_io_memory); + // AUX 1 + cpu_register_physical_memory(base + 0x1900000, MISC_MAXADDR, slavio_misc_io_memory); + // AUX 2 + cpu_register_physical_memory(base + 0x1910000, MISC_MAXADDR, slavio_misc_io_memory); + // Diagnostics + cpu_register_physical_memory(base + 0x1a00000, MISC_MAXADDR, slavio_misc_io_memory); + // Modem control + cpu_register_physical_memory(base + 0x1b00000, MISC_MAXADDR, slavio_misc_io_memory); + // System control + cpu_register_physical_memory(base + 0x1f00000, MISC_MAXADDR, slavio_misc_io_memory); + // Power management + cpu_register_physical_memory(base + 0xa000000, MISC_MAXADDR, slavio_misc_io_memory); + + s->irq = irq; + + register_savevm("slavio_misc", base, 1, slavio_misc_save, slavio_misc_load, s); + qemu_register_reset(slavio_misc_reset, s); + slavio_misc_reset(s); + return s; +} |