diff options
-rw-r--r-- | hw/usb-ehci.c | 174 |
1 files changed, 144 insertions, 30 deletions
diff --git a/hw/usb-ehci.c b/hw/usb-ehci.c index 973c342..ec68c29 100644 --- a/hw/usb-ehci.c +++ b/hw/usb-ehci.c @@ -20,9 +20,6 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, see <http://www.gnu.org/licenses/>. - * - * TODO: - * o Downstream port handoff */ #include "hw.h" @@ -106,7 +103,7 @@ * Bits that are reserved or are read-only are masked out of values * written to us by software */ -#define PORTSC_RO_MASK 0x007021c0 +#define PORTSC_RO_MASK 0x007001c0 #define PORTSC_RWC_MASK 0x0000002a #define PORTSC_WKOC_E (1 << 22) // Wake on Over Current Enable #define PORTSC_WKDS_E (1 << 21) // Wake on Disconnect Enable @@ -373,6 +370,7 @@ struct EHCIState { qemu_irq irq; target_phys_addr_t mem_base; int mem; + int companion_count; /* properties */ uint32_t freq; @@ -408,6 +406,7 @@ struct EHCIState { int astate; // Current state in asynchronous schedule int pstate; // Current state in periodic schedule USBPort ports[NB_PORTS]; + USBPort *companion_ports[NB_PORTS]; uint32_t usbsts_pending; QTAILQ_HEAD(, EHCIQueue) queues; @@ -730,17 +729,17 @@ static void ehci_attach(USBPort *port) trace_usb_ehci_port_attach(port->index, port->dev->product_desc); + if (*portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->dev = port->dev; + companion->ops->attach(companion); + return; + } + *portsc |= PORTSC_CONNECT; *portsc |= PORTSC_CSC; - /* - * If a high speed device is attached then we own this port(indicated - * by zero in the PORTSC_POWNER bit field) so set the status bit - * and set an interrupt if enabled. - */ - if ( !(*portsc & PORTSC_POWNER)) { - ehci_set_interrupt(s, USBSTS_PCD); - } + ehci_set_interrupt(s, USBSTS_PCD); } static void ehci_detach(USBPort *port) @@ -750,36 +749,110 @@ static void ehci_detach(USBPort *port) trace_usb_ehci_port_detach(port->index); + if (*portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->detach(companion); + companion->dev = NULL; + return; + } + ehci_queues_rip_device(s, port->dev); *portsc &= ~(PORTSC_CONNECT|PORTSC_PED); *portsc |= PORTSC_CSC; - /* - * If a high speed device is attached then we own this port(indicated - * by zero in the PORTSC_POWNER bit field) so set the status bit - * and set an interrupt if enabled. - */ - if ( !(*portsc & PORTSC_POWNER)) { - ehci_set_interrupt(s, USBSTS_PCD); - } + ehci_set_interrupt(s, USBSTS_PCD); } static void ehci_child_detach(USBPort *port, USBDevice *child) { EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->child_detach(companion, child); + companion->dev = NULL; + return; + } ehci_queues_rip_device(s, child); } +static void ehci_wakeup(USBPort *port) +{ + EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + if (companion->ops->wakeup) { + companion->ops->wakeup(companion); + } + } +} + +static int ehci_register_companion(USBBus *bus, USBPort *ports[], + uint32_t portcount, uint32_t firstport) +{ + EHCIState *s = container_of(bus, EHCIState, bus); + uint32_t i; + + if (firstport + portcount > NB_PORTS) { + qerror_report(QERR_INVALID_PARAMETER_VALUE, "firstport", + "firstport on masterbus"); + error_printf_unless_qmp( + "firstport value of %u makes companion take ports %u - %u, which " + "is outside of the valid range of 0 - %u\n", firstport, firstport, + firstport + portcount - 1, NB_PORTS - 1); + return -1; + } + + for (i = 0; i < portcount; i++) { + if (s->companion_ports[firstport + i]) { + qerror_report(QERR_INVALID_PARAMETER_VALUE, "masterbus", + "an USB masterbus"); + error_printf_unless_qmp( + "port %u on masterbus %s already has a companion assigned\n", + firstport + i, bus->qbus.name); + return -1; + } + } + + for (i = 0; i < portcount; i++) { + s->companion_ports[firstport + i] = ports[i]; + s->ports[firstport + i].speedmask |= + USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL; + /* Ensure devs attached before the initial reset go to the companion */ + s->portsc[firstport + i] = PORTSC_POWNER; + } + + s->companion_count++; + s->mmio[0x05] = (s->companion_count << 4) | portcount; + + return 0; +} + /* 4.1 host controller initialization */ static void ehci_reset(void *opaque) { EHCIState *s = opaque; int i; + USBDevice *devs[NB_PORTS]; trace_usb_ehci_reset(); + /* + * Do the detach before touching portsc, so that it correctly gets send to + * us or to our companion based on PORTSC_POWNER before the reset. + */ + for(i = 0; i < NB_PORTS; i++) { + devs[i] = s->ports[i].dev; + if (devs[i]) { + usb_attach(&s->ports[i], NULL); + } + } + memset(&s->mmio[OPREGBASE], 0x00, MMIO_SIZE - OPREGBASE); s->usbcmd = NB_MAXINTRATE << USBCMD_ITC_SH; @@ -791,10 +864,13 @@ static void ehci_reset(void *opaque) s->attach_poll_counter = 0; for(i = 0; i < NB_PORTS; i++) { - s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER; - - if (s->ports[i].dev) { - usb_attach(&s->ports[i], s->ports[i].dev); + if (s->companion_ports[i]) { + s->portsc[i] = PORTSC_POWNER | PORTSC_PPOWER; + } else { + s->portsc[i] = PORTSC_PPOWER; + } + if (devs[i]) { + usb_attach(&s->ports[i], devs[i]); } } ehci_queues_rip_all(s); @@ -844,6 +920,34 @@ static void ehci_mem_writew(void *ptr, target_phys_addr_t addr, uint32_t val) exit(1); } +static void handle_port_owner_write(EHCIState *s, int port, uint32_t owner) +{ + USBDevice *dev = s->ports[port].dev; + uint32_t *portsc = &s->portsc[port]; + uint32_t orig; + + if (s->companion_ports[port] == NULL) + return; + + owner = owner & PORTSC_POWNER; + orig = *portsc & PORTSC_POWNER; + + if (!(owner ^ orig)) { + return; + } + + if (dev) { + usb_attach(&s->ports[port], NULL); + } + + *portsc &= ~PORTSC_POWNER; + *portsc |= owner; + + if (dev) { + usb_attach(&s->ports[port], dev); + } +} + static void handle_port_status_write(EHCIState *s, int port, uint32_t val) { uint32_t *portsc = &s->portsc[port]; @@ -853,6 +957,9 @@ static void handle_port_status_write(EHCIState *s, int port, uint32_t val) *portsc &= ~(val & PORTSC_RWC_MASK); /* The guest may clear, but not set the PED bit */ *portsc &= val | ~PORTSC_PED; + /* POWNER is masked out by RO_MASK as it is RO when we've no companion */ + handle_port_owner_write(s, port, val); + /* And finally apply RO_MASK */ val &= PORTSC_RO_MASK; if ((val & PORTSC_PRESET) && !(*portsc & PORTSC_PRESET)) { @@ -956,7 +1063,7 @@ static void ehci_mem_writel(void *ptr, target_phys_addr_t addr, uint32_t val) val &= 0x1; if (val) { for(i = 0; i < NB_PORTS; i++) - s->portsc[i] &= ~PORTSC_POWNER; + handle_port_owner_write(s, i, 0); } break; @@ -1114,8 +1221,17 @@ static int ehci_buffer_rw(EHCIQueue *q, int bytes, int rw) static void ehci_async_complete_packet(USBPort *port, USBPacket *packet) { - EHCIQueue *q = container_of(packet, EHCIQueue, packet); + EHCIQueue *q; + EHCIState *s = port->opaque; + uint32_t portsc = s->portsc[port->index]; + + if (portsc & PORTSC_POWNER) { + USBPort *companion = s->companion_ports[port->index]; + companion->ops->complete(companion, packet); + return; + } + q = container_of(packet, EHCIQueue, packet); trace_usb_ehci_queue_action(q, "wakeup"); assert(q->async == EHCI_ASYNC_INFLIGHT); q->async = EHCI_ASYNC_FINISHED; @@ -1245,8 +1361,6 @@ static int ehci_execute(EHCIQueue *q) port = &q->ehci->ports[i]; dev = port->dev; - // TODO sometime we will also need to check if we are the port owner - if (!(q->ehci->portsc[i] &(PORTSC_CONNECT))) { DPRINTF("Port %d, no exec, not connected(%08X)\n", i, q->ehci->portsc[i]); @@ -1339,8 +1453,6 @@ static int ehci_process_itd(EHCIState *ehci, port = &ehci->ports[j]; dev = port->dev; - // TODO sometime we will also need to check if we are the port owner - if (!(ehci->portsc[j] &(PORTSC_CONNECT))) { continue; } @@ -2124,10 +2236,12 @@ static USBPortOps ehci_port_ops = { .attach = ehci_attach, .detach = ehci_detach, .child_detach = ehci_child_detach, + .wakeup = ehci_wakeup, .complete = ehci_async_complete_packet, }; static USBBusOps ehci_bus_ops = { + .register_companion = ehci_register_companion, }; static PCIDeviceInfo ehci_info = { |