New qdev_init_nofail()

Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

1 files changed, 14 insertions, 14 deletions

diff --git a/hw/sun4m.c b/hw/sun4m.c
index 01c7cb4..8f46a0f 100644
--- a/hw/sun4m.c
+++ b/hw/sun4m.c
@@ -359,7 +359,7 @@ static void *iommu_init(target_phys_addr_t addr, uint32_t version, qemu_irq irq)
 
     dev = qdev_create(NULL, "iommu");
     qdev_prop_set_uint32(dev, "version", version);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_connect_irq(s, 0, irq);
     sysbus_mmio_map(s, 0, addr);
@@ -375,7 +375,7 @@ static void *sparc32_dma_init(target_phys_addr_t daddr, qemu_irq parent_irq,
 
     dev = qdev_create(NULL, "sparc32_dma");
     qdev_prop_set_ptr(dev, "iommu_opaque", iommu);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_connect_irq(s, 0, parent_irq);
     *dev_irq = qdev_get_gpio_in(dev, 0);
@@ -396,7 +396,7 @@ static void lance_init(NICInfo *nd, target_phys_addr_t leaddr,
     dev = qdev_create(NULL, "lance");
     dev->nd = nd;
     qdev_prop_set_ptr(dev, "dma", dma_opaque);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_mmio_map(s, 0, leaddr);
     sysbus_connect_irq(s, 0, irq);
@@ -413,7 +413,7 @@ static DeviceState *slavio_intctl_init(target_phys_addr_t addr,
     unsigned int i, j;
 
     dev = qdev_create(NULL, "slavio_intctl");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
 
     s = sysbus_from_qdev(dev);
 
@@ -442,7 +442,7 @@ static void slavio_timer_init_all(target_phys_addr_t addr, qemu_irq master_irq,
 
     dev = qdev_create(NULL, "slavio_timer");
     qdev_prop_set_uint32(dev, "num_cpus", num_cpus);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_connect_irq(s, 0, master_irq);
     sysbus_mmio_map(s, 0, addr + SYS_TIMER_OFFSET);
@@ -468,7 +468,7 @@ static void slavio_misc_init(target_phys_addr_t base,
     SysBusDevice *s;
 
     dev = qdev_create(NULL, "slavio_misc");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     if (base) {
         /* 8 bit registers */
@@ -505,7 +505,7 @@ static void ecc_init(target_phys_addr_t base, qemu_irq irq, uint32_t version)
 
     dev = qdev_create(NULL, "eccmemctl");
     qdev_prop_set_uint32(dev, "version", version);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     sysbus_connect_irq(s, 0, irq);
     sysbus_mmio_map(s, 0, base);
@@ -520,7 +520,7 @@ static void apc_init(target_phys_addr_t power_base, qemu_irq cpu_halt)
     SysBusDevice *s;
 
     dev = qdev_create(NULL, "apc");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     /* Power management (APC) XXX: not a Slavio device */
     sysbus_mmio_map(s, 0, power_base);
@@ -539,7 +539,7 @@ static void tcx_init(target_phys_addr_t addr, int vram_size, int width,
     qdev_prop_set_uint16(dev, "width", width);
     qdev_prop_set_uint16(dev, "height", height);
     qdev_prop_set_uint16(dev, "depth", depth);
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
     /* 8-bit plane */
     sysbus_mmio_map(s, 0, addr + 0x00800000ULL);
@@ -569,7 +569,7 @@ static void idreg_init(target_phys_addr_t addr)
     SysBusDevice *s;
 
     dev = qdev_create(NULL, "macio_idreg");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
 
     sysbus_mmio_map(s, 0, addr);
@@ -607,7 +607,7 @@ static void prom_init(target_phys_addr_t addr, const char *bios_name)
     int ret;
 
     dev = qdev_create(NULL, "openprom");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
     s = sysbus_from_qdev(dev);
 
     sysbus_mmio_map(s, 0, addr);
@@ -697,7 +697,7 @@ static void ram_init(target_phys_addr_t addr, ram_addr_t RAM_size,
 
     d = FROM_SYSBUS(RamDevice, s);
     d->size = RAM_size;
-    qdev_init(dev);
+    qdev_init_nofail(dev);
 
     sysbus_mmio_map(s, 0, addr);
 }
@@ -1344,7 +1344,7 @@ static DeviceState *sbi_init(target_phys_addr_t addr, qemu_irq **parent_irq)
     unsigned int i;
 
     dev = qdev_create(NULL, "sbi");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
 
     s = sysbus_from_qdev(dev);
 
@@ -1534,7 +1534,7 @@ static DeviceState *sun4c_intctl_init(target_phys_addr_t addr,
     unsigned int i;
 
     dev = qdev_create(NULL, "sun4c_intctl");
-    qdev_init(dev);
+    qdev_init_nofail(dev);
 
     s = sysbus_from_qdev(dev);