Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150908' into staging

target-arm queue:
 * Implement priority handling properly via GICC_APR
 * Enable TZ extensions on the GIC if we're using them
 * Minor preparatory patches for EL3 support
 * cadence_gem: Correct Marvell PHY SPCFC reset value
 * Support AHCI in ZynqMP

# gpg: Signature made Tue 08 Sep 2015 17:48:33 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20150908:
  xlnx-zynqmp: Connect the sysbus AHCI to ZynqMP
  xlnx-zynqmp.c: Convert some of the error_propagate() calls to error_abort
  ahci.c: Don't assume AHCIState's parent is AHCIPCIState
  ahci: Separate the AHCI state structure into the header
  cadence_gem: Correct Marvell PHY SPCFC reset value
  target-arm: Add AArch64 access to PAR_EL1
  target-arm: Correct opc1 for AT_S12Exx
  target-arm: Log the target EL when taking exceptions
  target-arm: Fix default_exception_el() function for the case when EL3 is not supported
  hw/arm/virt: Enable TZ extensions on the GIC if we are using them
  hw/arm/virt: Default to not providing TrustZone support
  hw/cpu/{a15mpcore, a9mpcore}: enable TrustZone in GIC if it is enabled in CPUs
  hw/intc/arm_gic_common: Configure IRQs as NS if doing direct NS kernel boot
  hw/arm: new interface for devices which need to behave differently for kernel boot
  qom: Add recursive version of object_child_for_each
  hw/intc/arm_gic: Actually set the active bits for active interrupts
  hw/intc/arm_gic: Drop running_irq and last_active arrays
  hw/intc/arm_gic: Fix handling of GICC_APR<n>, GICC_NSAPR<n> registers
  hw/intc/arm_gic: Running priority is group priority, not full priority
  armv7m_nvic: Implement ICSR without using internal GIC state

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 51 insertions, 8 deletions

diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c
index fe64b51..9c82b97 100644
--- a/hw/intc/arm_gic_common.c
+++ b/hw/intc/arm_gic_common.c
@@ -19,6 +19,7 @@
  */
 
 #include "gic_internal.h"
+#include "hw/arm/linux-boot-if.h"
 
 static void gic_pre_save(void *opaque)
 {
@@ -59,8 +60,8 @@ static const VMStateDescription vmstate_gic_irq_state = {
 
 static const VMStateDescription vmstate_gic = {
     .name = "arm_gic",
-    .version_id = 10,
-    .minimum_version_id = 10,
+    .version_id = 12,
+    .minimum_version_id = 12,
     .pre_save = gic_pre_save,
     .post_load = gic_post_load,
     .fields = (VMStateField[]) {
@@ -71,15 +72,14 @@ static const VMStateDescription vmstate_gic = {
         VMSTATE_UINT8_ARRAY(irq_target, GICState, GIC_MAXIRQ),
         VMSTATE_UINT8_2DARRAY(priority1, GICState, GIC_INTERNAL, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(priority2, GICState, GIC_MAXIRQ - GIC_INTERNAL),
-        VMSTATE_UINT16_2DARRAY(last_active, GICState, GIC_MAXIRQ, GIC_NCPU),
         VMSTATE_UINT8_2DARRAY(sgi_pending, GICState, GIC_NR_SGIS, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(priority_mask, GICState, GIC_NCPU),
-        VMSTATE_UINT16_ARRAY(running_irq, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(running_priority, GICState, GIC_NCPU),
         VMSTATE_UINT16_ARRAY(current_pending, GICState, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(bpr, GICState, GIC_NCPU),
         VMSTATE_UINT8_ARRAY(abpr, GICState, GIC_NCPU),
         VMSTATE_UINT32_2DARRAY(apr, GICState, GIC_NR_APRS, GIC_NCPU),
+        VMSTATE_UINT32_2DARRAY(nsapr, GICState, GIC_NR_APRS, GIC_NCPU),
         VMSTATE_END_OF_LIST()
     }
 };
@@ -165,21 +165,35 @@ static void arm_gic_common_reset(DeviceState *dev)
 {
     GICState *s = ARM_GIC_COMMON(dev);
     int i, j;
+    int resetprio;
+
+    /* If we're resetting a TZ-aware GIC as if secure firmware
+     * had set it up ready to start a kernel in non-secure,
+     * we need to set interrupt priorities to a "zero for the
+     * NS view" value. This is particularly critical for the
+     * priority_mask[] values, because if they are zero then NS
+     * code cannot ever rewrite the priority to anything else.
+     */
+    if (s->security_extn && s->irq_reset_nonsecure) {
+        resetprio = 0x80;
+    } else {
+        resetprio = 0;
+    }
+
     memset(s->irq_state, 0, GIC_MAXIRQ * sizeof(gic_irq_state));
     for (i = 0 ; i < s->num_cpu; i++) {
         if (s->revision == REV_11MPCORE) {
             s->priority_mask[i] = 0xf0;
         } else {
-            s->priority_mask[i] = 0;
+            s->priority_mask[i] = resetprio;
         }
         s->current_pending[i] = 1023;
-        s->running_irq[i] = 1023;
         s->running_priority[i] = 0x100;
         s->cpu_ctlr[i] = 0;
         s->bpr[i] = GIC_MIN_BPR;
         s->abpr[i] = GIC_MIN_ABPR;
         for (j = 0; j < GIC_INTERNAL; j++) {
-            s->priority1[j][i] = 0;
+            s->priority1[j][i] = resetprio;
         }
         for (j = 0; j < GIC_NR_SGIS; j++) {
             s->sgi_pending[j][i] = 0;
@@ -191,7 +205,7 @@ static void arm_gic_common_reset(DeviceState *dev)
     }
 
     for (i = 0; i < ARRAY_SIZE(s->priority2); i++) {
-        s->priority2[i] = 0;
+        s->priority2[i] = resetprio;
     }
 
     for (i = 0; i < GIC_MAXIRQ; i++) {
@@ -202,9 +216,32 @@ static void arm_gic_common_reset(DeviceState *dev)
             s->irq_target[i] = 0;
         }
     }
+    if (s->security_extn && s->irq_reset_nonsecure) {
+        for (i = 0; i < GIC_MAXIRQ; i++) {
+            GIC_SET_GROUP(i, ALL_CPU_MASK);
+        }
+    }
+
     s->ctlr = 0;
 }
 
+static void arm_gic_common_linux_init(ARMLinuxBootIf *obj,
+                                      bool secure_boot)
+{
+    GICState *s = ARM_GIC_COMMON(obj);
+
+    if (s->security_extn && !secure_boot) {
+        /* We're directly booting a kernel into NonSecure. If this GIC
+         * implements the security extensions then we must configure it
+         * to have all the interrupts be NonSecure (this is a job that
+         * is done by the Secure boot firmware in real hardware, and in
+         * this mode QEMU is acting as a minimalist firmware-and-bootloader
+         * equivalent).
+         */
+        s->irq_reset_nonsecure = true;
+    }
+}
+
 static Property arm_gic_common_properties[] = {
     DEFINE_PROP_UINT32("num-cpu", GICState, num_cpu, 1),
     DEFINE_PROP_UINT32("num-irq", GICState, num_irq, 32),
@@ -221,11 +258,13 @@ static Property arm_gic_common_properties[] = {
 static void arm_gic_common_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ARMLinuxBootIfClass *albifc = ARM_LINUX_BOOT_IF_CLASS(klass);
 
     dc->reset = arm_gic_common_reset;
     dc->realize = arm_gic_common_realize;
     dc->props = arm_gic_common_properties;
     dc->vmsd = &vmstate_gic;
+    albifc->arm_linux_init = arm_gic_common_linux_init;
 }
 
 static const TypeInfo arm_gic_common_type = {
@@ -235,6 +274,10 @@ static const TypeInfo arm_gic_common_type = {
     .class_size = sizeof(ARMGICCommonClass),
     .class_init = arm_gic_common_class_init,
     .abstract = true,
+    .interfaces = (InterfaceInfo []) {
+        { TYPE_ARM_LINUX_BOOT_IF },
+        { },
+    },
 };
 
 static void register_types(void)