ide: move code to hw/ide/

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

1 files changed, 535 insertions, 0 deletions

diff --git a/hw/ide/internal.h b/hw/ide/internal.h
new file mode 100644
index 0000000..65991a8
--- /dev/null
+++ b/hw/ide/internal.h
@@ -0,0 +1,535 @@
+#ifndef HW_IDE_INTERNAL_H
+#define HW_IDE_INTERNAL_H
+
+/*
+ * QEMU IDE Emulation -- internal header file
+ * only files in hw/ide/ are supposed to include this file.
+ * non-internal declarations are in hw/ide.h
+ */
+#include <hw/ide.h>
+
+/* debug IDE devices */
+//#define DEBUG_IDE
+//#define DEBUG_IDE_ATAPI
+//#define DEBUG_AIO
+#define USE_DMA_CDROM
+
+typedef struct IDEBus IDEBus;
+typedef struct IDEState IDEState;
+typedef struct BMDMAState BMDMAState;
+
+/* debug IDE devices */
+//#define DEBUG_IDE
+//#define DEBUG_IDE_ATAPI
+//#define DEBUG_AIO
+#define USE_DMA_CDROM
+
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define INDEX_STAT		0x02
+#define ECC_STAT		0x04	/* Corrected error */
+#define DRQ_STAT		0x08
+#define SEEK_STAT		0x10
+#define SRV_STAT		0x10
+#define WRERR_STAT		0x20
+#define READY_STAT		0x40
+#define BUSY_STAT		0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR		0x01	/* Bad address mark */
+#define TRK0_ERR		0x02	/* couldn't find track 0 */
+#define ABRT_ERR		0x04	/* Command aborted */
+#define MCR_ERR			0x08	/* media change request */
+#define ID_ERR			0x10	/* ID field not found */
+#define MC_ERR			0x20	/* media changed */
+#define ECC_ERR			0x40	/* Uncorrectable ECC error */
+#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
+#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD			0x01
+#define IO			0x02
+#define REL			0x04
+#define TAG_MASK		0xf8
+
+#define IDE_CMD_RESET           0x04
+#define IDE_CMD_DISABLE_IRQ     0x02
+
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+/*
+ *	0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/*
+ *	0x04->0x07 Reserved
+ */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+/*
+ *	0x09->0x0F Reserved
+ */
+#define WIN_RECAL			0x10
+#define WIN_RESTORE			WIN_RECAL
+/*
+ *	0x10->0x1F Reserved
+ */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG			0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/*
+ *	0x28
+ */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/*
+ *	0x2A->0x2F Reserved
+ */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG			0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/*
+ *	0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+/*
+ *	0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/*
+ *	0x43->0x4F Reserved
+ */
+#define WIN_FORMAT			0x50
+/*
+ *	0x51->0x5F Reserved
+ */
+#define WIN_INIT			0x60
+/*
+ *	0x61->0x5F Reserved
+ */
+#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define CFA_IDLEIMMEDIATE		0x95 /* force drive to become "ready" */
+#define WIN_STANDBY2			0x96
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+/*
+ *	0x9A VENDOR
+ */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ACCESS_METADATA_STORAGE	0xB8
+#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT			0xDC
+#define WIN_PREBOOT			0xDD
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
+	/* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define IBM_SENSE_CONDITION		0xF0 /* measure disk temperature */
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define CFA_WEAR_LEVEL			0xF5 /* microdrives implement as NOP */
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* set to 1 set disable mult support */
+#define MAX_MULT_SECTORS 16
+
+#define IDE_DMA_BUF_SECTORS 256
+
+#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
+#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
+#endif
+
+/* ATAPI defines */
+
+#define ATAPI_PACKET_SIZE 12
+
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xad
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+#define GPCMD_MODE_SENSE_6		    0x1a
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+/*
+ * Based on values from <linux/cdrom.h> but extending CD_MINS
+ * to the maximum common size allowed by the Orange's Book ATIP
+ *
+ * 90 and 99 min CDs are also available but using them as the
+ * upper limit reduces the effectiveness of the heuristic to
+ * detect DVDs burned to less than 25% of their maximum capacity
+ */
+
+/* Some generally useful CD-ROM information */
+#define CD_MINS                       80 /* max. minutes per CD */
+#define CD_SECS                       60 /* seconds per minute */
+#define CD_FRAMES                     75 /* frames per second */
+#define CD_FRAMESIZE                2048 /* bytes per frame, "cooked" mode */
+#define CD_MAX_BYTES       (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
+#define CD_MAX_SECTORS     (CD_MAX_BYTES / 512)
+
+/*
+ * The MMC values are not IDE specific and might need to be moved
+ * to a common header if they are also needed for the SCSI emulation
+ */
+
+/* Profile list from MMC-6 revision 1 table 91 */
+#define MMC_PROFILE_NONE                0x0000
+#define MMC_PROFILE_CD_ROM              0x0008
+#define MMC_PROFILE_CD_R                0x0009
+#define MMC_PROFILE_CD_RW               0x000A
+#define MMC_PROFILE_DVD_ROM             0x0010
+#define MMC_PROFILE_DVD_R_SR            0x0011
+#define MMC_PROFILE_DVD_RAM             0x0012
+#define MMC_PROFILE_DVD_RW_RO           0x0013
+#define MMC_PROFILE_DVD_RW_SR           0x0014
+#define MMC_PROFILE_DVD_R_DL_SR         0x0015
+#define MMC_PROFILE_DVD_R_DL_JR         0x0016
+#define MMC_PROFILE_DVD_RW_DL           0x0017
+#define MMC_PROFILE_DVD_DDR             0x0018
+#define MMC_PROFILE_DVD_PLUS_RW         0x001A
+#define MMC_PROFILE_DVD_PLUS_R          0x001B
+#define MMC_PROFILE_DVD_PLUS_RW_DL      0x002A
+#define MMC_PROFILE_DVD_PLUS_R_DL       0x002B
+#define MMC_PROFILE_BD_ROM              0x0040
+#define MMC_PROFILE_BD_R_SRM            0x0041
+#define MMC_PROFILE_BD_R_RRM            0x0042
+#define MMC_PROFILE_BD_RE               0x0043
+#define MMC_PROFILE_HDDVD_ROM           0x0050
+#define MMC_PROFILE_HDDVD_R             0x0051
+#define MMC_PROFILE_HDDVD_RAM           0x0052
+#define MMC_PROFILE_HDDVD_RW            0x0053
+#define MMC_PROFILE_HDDVD_R_DL          0x0058
+#define MMC_PROFILE_HDDVD_RW_DL         0x005A
+#define MMC_PROFILE_INVALID             0xFFFF
+
+#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
+#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
+#define ATAPI_INT_REASON_REL            0x04
+#define ATAPI_INT_REASON_TAG            0xf8
+
+/* same constants as bochs */
+#define ASC_ILLEGAL_OPCODE                   0x20
+#define ASC_LOGICAL_BLOCK_OOR                0x21
+#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
+#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
+#define ASC_INCOMPATIBLE_FORMAT              0x30
+#define ASC_MEDIUM_NOT_PRESENT               0x3a
+#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
+#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
+
+#define CFA_NO_ERROR            0x00
+#define CFA_MISC_ERROR          0x09
+#define CFA_INVALID_COMMAND     0x20
+#define CFA_INVALID_ADDRESS     0x21
+#define CFA_ADDRESS_OVERFLOW    0x2f
+
+#define SENSE_NONE            0
+#define SENSE_NOT_READY       2
+#define SENSE_ILLEGAL_REQUEST 5
+#define SENSE_UNIT_ATTENTION  6
+
+#define SMART_READ_DATA       0xd0
+#define SMART_READ_THRESH     0xd1
+#define SMART_ATTR_AUTOSAVE   0xd2
+#define SMART_SAVE_ATTR       0xd3
+#define SMART_EXECUTE_OFFLINE 0xd4
+#define SMART_READ_LOG        0xd5
+#define SMART_WRITE_LOG       0xd6
+#define SMART_ENABLE          0xd8
+#define SMART_DISABLE         0xd9
+#define SMART_STATUS          0xda
+
+typedef void EndTransferFunc(IDEState *);
+
+/* NOTE: IDEState represents in fact one drive */
+struct IDEState {
+    IDEBus *bus;
+    uint8_t unit;
+    /* ide config */
+    int is_cdrom;
+    int is_cf;
+    int cylinders, heads, sectors;
+    int64_t nb_sectors;
+    int mult_sectors;
+    int identify_set;
+    uint16_t identify_data[256];
+    qemu_irq irq;
+    int drive_serial;
+    char drive_serial_str[21];
+    /* ide regs */
+    uint8_t feature;
+    uint8_t error;
+    uint32_t nsector;
+    uint8_t sector;
+    uint8_t lcyl;
+    uint8_t hcyl;
+    /* other part of tf for lba48 support */
+    uint8_t hob_feature;
+    uint8_t hob_nsector;
+    uint8_t hob_sector;
+    uint8_t hob_lcyl;
+    uint8_t hob_hcyl;
+
+    uint8_t select;
+    uint8_t status;
+
+    /* 0x3f6 command, only meaningful for drive 0 */
+    uint8_t cmd;
+    /* set for lba48 access */
+    uint8_t lba48;
+    BlockDriverState *bs;
+    /* ATAPI specific */
+    uint8_t sense_key;
+    uint8_t asc;
+    uint8_t cdrom_changed;
+    int packet_transfer_size;
+    int elementary_transfer_size;
+    int io_buffer_index;
+    int lba;
+    int cd_sector_size;
+    int atapi_dma; /* true if dma is requested for the packet cmd */
+    /* ATA DMA state */
+    int io_buffer_size;
+    QEMUSGList sg;
+    /* PIO transfer handling */
+    int req_nb_sectors; /* number of sectors per interrupt */
+    EndTransferFunc *end_transfer_func;
+    uint8_t *data_ptr;
+    uint8_t *data_end;
+    uint8_t *io_buffer;
+    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
+    uint32_t irq_count; /* counts IRQs when using win2k install hack */
+    /* CF-ATA extended error */
+    uint8_t ext_error;
+    /* CF-ATA metadata storage */
+    uint32_t mdata_size;
+    uint8_t *mdata_storage;
+    int media_changed;
+    /* for pmac */
+    int is_read;
+    /* SMART */
+    uint8_t smart_enabled;
+    uint8_t smart_autosave;
+    int smart_errors;
+    uint8_t smart_selftest_count;
+    uint8_t *smart_selftest_data;
+};
+
+struct IDEBus {
+    BusState qbus;
+    BMDMAState *bmdma;
+    IDEState ifs[2];
+    uint8_t unit;
+};
+
+#define BM_STATUS_DMAING 0x01
+#define BM_STATUS_ERROR  0x02
+#define BM_STATUS_INT    0x04
+#define BM_STATUS_DMA_RETRY  0x08
+#define BM_STATUS_PIO_RETRY  0x10
+
+#define BM_CMD_START     0x01
+#define BM_CMD_READ      0x08
+
+struct BMDMAState {
+    uint8_t cmd;
+    uint8_t status;
+    uint32_t addr;
+
+    struct PCIIDEState *pci_dev;
+    IDEBus *bus;
+    /* current transfer state */
+    uint32_t cur_addr;
+    uint32_t cur_prd_last;
+    uint32_t cur_prd_addr;
+    uint32_t cur_prd_len;
+    uint8_t unit;
+    BlockDriverCompletionFunc *dma_cb;
+    BlockDriverAIOCB *aiocb;
+    struct iovec iov;
+    QEMUIOVector qiov;
+    int64_t sector_num;
+    uint32_t nsector;
+    QEMUBH *bh;
+};
+
+static inline IDEState *idebus_active_if(IDEBus *bus)
+{
+    return bus->ifs + bus->unit;
+}
+
+static inline IDEState *bmdma_active_if(BMDMAState *bmdma)
+{
+    assert(bmdma->unit != -1);
+    return bmdma->bus->ifs + bmdma->unit;
+}
+
+static inline void ide_set_irq(IDEState *s)
+{
+    BMDMAState *bm = s->bus->bmdma;
+    if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
+        if (bm) {
+            bm->status |= BM_STATUS_INT;
+        }
+        qemu_irq_raise(s->irq);
+    }
+}
+
+/* ide.c */
+void ide_save(QEMUFile* f, IDEState *s);
+void ide_load(QEMUFile* f, IDEState *s, int version_id);
+void idebus_save(QEMUFile* f, IDEBus *bus);
+void idebus_load(QEMUFile* f, IDEBus *bus, int version_id);
+
+void ide_reset(IDEState *s);
+int64_t ide_get_sector(IDEState *s);
+void ide_set_sector(IDEState *s, int64_t sector_num);
+
+void ide_dma_cancel(BMDMAState *bm);
+void ide_dma_restart_cb(void *opaque, int running, int reason);
+void ide_dma_error(IDEState *s);
+
+void ide_atapi_cmd_ok(IDEState *s);
+void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
+void ide_atapi_io_error(IDEState *s, int ret);
+
+void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
+uint32_t ide_status_read(void *opaque, uint32_t addr);
+void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
+void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readw(void *opaque, uint32_t addr);
+void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readl(void *opaque, uint32_t addr);
+
+void ide_init2(IDEBus *bus, BlockDriverState *hd0, BlockDriverState *hd1,
+               qemu_irq irq);
+void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
+
+#endif /* HW_IDE_INTERNAL_H */