hw: move PCI bridges to hw/pci-* or hw/ARCH

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

2 files changed, 843 insertions, 5 deletions

diff --git a/hw/alpha/Makefile.objs b/hw/alpha/Makefile.objs
index 5dfea7a..5c74275 100644
--- a/hw/alpha/Makefile.objs
+++ b/hw/alpha/Makefile.objs
@@ -1,5 +1 @@
-obj-y += alpha_typhoon.o
-
-obj-y := $(addprefix ../,$(obj-y))
-
-obj-y += dp264.o pci.o
+obj-y += dp264.o pci.o typhoon.o
diff --git a/hw/alpha/typhoon.c b/hw/alpha/typhoon.c
new file mode 100644
index 0000000..41a0ebc
--- /dev/null
+++ b/hw/alpha/typhoon.c
@@ -0,0 +1,842 @@
+/*
+ * DEC 21272 (TSUNAMI/TYPHOON) chipset emulation.
+ *
+ * Written by Richard Henderson.
+ *
+ * This work is licensed under the GNU GPL license version 2 or later.
+ */
+
+#include "cpu.h"
+#include "exec/exec-all.h"
+#include "hw/hw.h"
+#include "hw/arm/devices.h"
+#include "sysemu/sysemu.h"
+#include "hw/alpha_sys.h"
+#include "exec/address-spaces.h"
+
+
+#define TYPE_TYPHOON_PCI_HOST_BRIDGE "typhoon-pcihost"
+
+typedef struct TyphoonCchip {
+    MemoryRegion region;
+    uint64_t misc;
+    uint64_t drir;
+    uint64_t dim[4];
+    uint32_t iic[4];
+    AlphaCPU *cpu[4];
+} TyphoonCchip;
+
+typedef struct TyphoonWindow {
+    uint32_t base_addr;
+    uint32_t mask;
+    uint32_t translated_base_pfn;
+} TyphoonWindow;
+ 
+typedef struct TyphoonPchip {
+    MemoryRegion region;
+    MemoryRegion reg_iack;
+    MemoryRegion reg_mem;
+    MemoryRegion reg_io;
+    MemoryRegion reg_conf;
+    uint64_t ctl;
+    TyphoonWindow win[4];
+} TyphoonPchip;
+
+#define TYPHOON_PCI_HOST_BRIDGE(obj) \
+    OBJECT_CHECK(TyphoonState, (obj), TYPE_TYPHOON_PCI_HOST_BRIDGE)
+
+typedef struct TyphoonState {
+    PCIHostState parent_obj;
+
+    TyphoonCchip cchip;
+    TyphoonPchip pchip;
+    MemoryRegion dchip_region;
+    MemoryRegion ram_region;
+
+    /* QEMU emulation state.  */
+    uint32_t latch_tmp;
+} TyphoonState;
+
+/* Called when one of DRIR or DIM changes.  */
+static void cpu_irq_change(AlphaCPU *cpu, uint64_t req)
+{
+    /* If there are any non-masked interrupts, tell the cpu.  */
+    if (cpu != NULL) {
+        CPUState *cs = CPU(cpu);
+        if (req) {
+            cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+        } else {
+            cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+        }
+    }
+}
+
+static uint64_t cchip_read(void *opaque, hwaddr addr, unsigned size)
+{
+    CPUAlphaState *env = cpu_single_env;
+    TyphoonState *s = opaque;
+    CPUState *cpu;
+    uint64_t ret = 0;
+
+    if (addr & 4) {
+        return s->latch_tmp;
+    }
+
+    switch (addr) {
+    case 0x0000:
+        /* CSC: Cchip System Configuration Register.  */
+        /* All sorts of data here; probably the only thing relevant is
+           PIP<14> Pchip 1 Present = 0.  */
+        break;
+
+    case 0x0040:
+        /* MTR: Memory Timing Register.  */
+        /* All sorts of stuff related to real DRAM.  */
+        break;
+
+    case 0x0080:
+        /* MISC: Miscellaneous Register.  */
+        cpu = ENV_GET_CPU(env);
+        ret = s->cchip.misc | (cpu->cpu_index & 3);
+        break;
+
+    case 0x00c0:
+        /* MPD: Memory Presence Detect Register.  */
+        break;
+
+    case 0x0100: /* AAR0 */
+    case 0x0140: /* AAR1 */
+    case 0x0180: /* AAR2 */
+    case 0x01c0: /* AAR3 */
+        /* AAR: Array Address Register.  */
+        /* All sorts of information about DRAM.  */
+        break;
+
+    case 0x0200:
+        /* DIM0: Device Interrupt Mask Register, CPU0.  */
+        ret = s->cchip.dim[0];
+        break;
+    case 0x0240:
+        /* DIM1: Device Interrupt Mask Register, CPU1.  */
+        ret = s->cchip.dim[1];
+        break;
+    case 0x0280:
+        /* DIR0: Device Interrupt Request Register, CPU0.  */
+        ret = s->cchip.dim[0] & s->cchip.drir;
+        break;
+    case 0x02c0:
+        /* DIR1: Device Interrupt Request Register, CPU1.  */
+        ret = s->cchip.dim[1] & s->cchip.drir;
+        break;
+    case 0x0300:
+        /* DRIR: Device Raw Interrupt Request Register.  */
+        ret = s->cchip.drir;
+        break;
+
+    case 0x0340:
+        /* PRBEN: Probe Enable Register.  */
+        break;
+
+    case 0x0380:
+        /* IIC0: Interval Ignore Count Register, CPU0.  */
+        ret = s->cchip.iic[0];
+        break;
+    case 0x03c0:
+        /* IIC1: Interval Ignore Count Register, CPU1.  */
+        ret = s->cchip.iic[1];
+        break;
+
+    case 0x0400: /* MPR0 */
+    case 0x0440: /* MPR1 */
+    case 0x0480: /* MPR2 */
+    case 0x04c0: /* MPR3 */
+        /* MPR: Memory Programming Register.  */
+        break;
+
+    case 0x0580:
+        /* TTR: TIGbus Timing Register.  */
+        /* All sorts of stuff related to interrupt delivery timings.  */
+        break;
+    case 0x05c0:
+        /* TDR: TIGbug Device Timing Register.  */
+        break;
+
+    case 0x0600:
+        /* DIM2: Device Interrupt Mask Register, CPU2.  */
+        ret = s->cchip.dim[2];
+        break;
+    case 0x0640:
+        /* DIM3: Device Interrupt Mask Register, CPU3.  */
+        ret = s->cchip.dim[3];
+        break;
+    case 0x0680:
+        /* DIR2: Device Interrupt Request Register, CPU2.  */
+        ret = s->cchip.dim[2] & s->cchip.drir;
+        break;
+    case 0x06c0:
+        /* DIR3: Device Interrupt Request Register, CPU3.  */
+        ret = s->cchip.dim[3] & s->cchip.drir;
+        break;
+
+    case 0x0700:
+        /* IIC2: Interval Ignore Count Register, CPU2.  */
+        ret = s->cchip.iic[2];
+        break;
+    case 0x0740:
+        /* IIC3: Interval Ignore Count Register, CPU3.  */
+        ret = s->cchip.iic[3];
+        break;
+
+    case 0x0780:
+        /* PWR: Power Management Control.   */
+        break;
+    
+    case 0x0c00: /* CMONCTLA */
+    case 0x0c40: /* CMONCTLB */
+    case 0x0c80: /* CMONCNT01 */
+    case 0x0cc0: /* CMONCNT23 */
+        break;
+
+    default:
+        cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
+        return -1;
+    }
+
+    s->latch_tmp = ret >> 32;
+    return ret;
+}
+
+static uint64_t dchip_read(void *opaque, hwaddr addr, unsigned size)
+{
+    /* Skip this.  It's all related to DRAM timing and setup.  */
+    return 0;
+}
+
+static uint64_t pchip_read(void *opaque, hwaddr addr, unsigned size)
+{
+    TyphoonState *s = opaque;
+    uint64_t ret = 0;
+
+    if (addr & 4) {
+        return s->latch_tmp;
+    }
+
+    switch (addr) {
+    case 0x0000:
+        /* WSBA0: Window Space Base Address Register.  */
+        ret = s->pchip.win[0].base_addr;
+        break;
+    case 0x0040:
+        /* WSBA1 */
+        ret = s->pchip.win[1].base_addr;
+        break;
+    case 0x0080:
+        /* WSBA2 */
+        ret = s->pchip.win[2].base_addr;
+        break;
+    case 0x00c0:
+        /* WSBA3 */
+        ret = s->pchip.win[3].base_addr;
+        break;
+
+    case 0x0100:
+        /* WSM0: Window Space Mask Register.  */
+        ret = s->pchip.win[0].mask;
+        break;
+    case 0x0140:
+        /* WSM1 */
+        ret = s->pchip.win[1].mask;
+        break;
+    case 0x0180:
+        /* WSM2 */
+        ret = s->pchip.win[2].mask;
+        break;
+    case 0x01c0:
+        /* WSM3 */
+        ret = s->pchip.win[3].mask;
+        break;
+
+    case 0x0200:
+        /* TBA0: Translated Base Address Register.  */
+        ret = (uint64_t)s->pchip.win[0].translated_base_pfn << 10;
+        break;
+    case 0x0240:
+        /* TBA1 */
+        ret = (uint64_t)s->pchip.win[1].translated_base_pfn << 10;
+        break;
+    case 0x0280:
+        /* TBA2 */
+        ret = (uint64_t)s->pchip.win[2].translated_base_pfn << 10;
+        break;
+    case 0x02c0:
+        /* TBA3 */
+        ret = (uint64_t)s->pchip.win[3].translated_base_pfn << 10;
+        break;
+
+    case 0x0300:
+        /* PCTL: Pchip Control Register.  */
+        ret = s->pchip.ctl;
+        break;
+    case 0x0340:
+        /* PLAT: Pchip Master Latency Register.  */
+        break;
+    case 0x03c0:
+        /* PERROR: Pchip Error Register.  */
+        break;
+    case 0x0400:
+        /* PERRMASK: Pchip Error Mask Register.  */
+        break;
+    case 0x0440:
+        /* PERRSET: Pchip Error Set Register.  */
+        break;
+    case 0x0480:
+        /* TLBIV: Translation Buffer Invalidate Virtual Register (WO).  */
+        break;
+    case 0x04c0:
+        /* TLBIA: Translation Buffer Invalidate All Register (WO).  */
+        break;
+    case 0x0500: /* PMONCTL */
+    case 0x0540: /* PMONCNT */
+    case 0x0800: /* SPRST */
+        break;
+
+    default:
+        cpu_unassigned_access(cpu_single_env, addr, 0, 0, 0, size);
+        return -1;
+    }
+
+    s->latch_tmp = ret >> 32;
+    return ret;
+}
+
+static void cchip_write(void *opaque, hwaddr addr,
+                        uint64_t v32, unsigned size)
+{
+    TyphoonState *s = opaque;
+    uint64_t val, oldval, newval;
+
+    if (addr & 4) {
+        val = v32 << 32 | s->latch_tmp;
+        addr ^= 4;
+    } else {
+        s->latch_tmp = v32;
+        return;
+    }
+
+    switch (addr) {
+    case 0x0000:
+        /* CSC: Cchip System Configuration Register.  */
+        /* All sorts of data here; nothing relevant RW.  */
+        break;
+
+    case 0x0040:
+        /* MTR: Memory Timing Register.  */
+        /* All sorts of stuff related to real DRAM.  */
+        break;
+
+    case 0x0080:
+        /* MISC: Miscellaneous Register.  */
+        newval = oldval = s->cchip.misc;
+        newval &= ~(val & 0x10000ff0);     /* W1C fields */
+        if (val & 0x100000) {
+            newval &= ~0xff0000ull;        /* ACL clears ABT and ABW */
+        } else {
+            newval |= val & 0x00f00000;    /* ABT field is W1S */
+            if ((newval & 0xf0000) == 0) {
+                newval |= val & 0xf0000;   /* ABW field is W1S iff zero */
+            }
+        }
+        newval |= (val & 0xf000) >> 4;     /* IPREQ field sets IPINTR.  */
+
+        newval &= ~0xf0000000000ull;       /* WO and RW fields */
+        newval |= val & 0xf0000000000ull;
+        s->cchip.misc = newval;
+
+        /* Pass on changes to IPI and ITI state.  */
+        if ((newval ^ oldval) & 0xff0) {
+            int i;
+            for (i = 0; i < 4; ++i) {
+                AlphaCPU *cpu = s->cchip.cpu[i];
+                if (cpu != NULL) {
+                    CPUState *cs = CPU(cpu);
+                    /* IPI can be either cleared or set by the write.  */
+                    if (newval & (1 << (i + 8))) {
+                        cpu_interrupt(cs, CPU_INTERRUPT_SMP);
+                    } else {
+                        cpu_reset_interrupt(cs, CPU_INTERRUPT_SMP);
+                    }
+
+                    /* ITI can only be cleared by the write.  */
+                    if ((newval & (1 << (i + 4))) == 0) {
+                        cpu_reset_interrupt(cs, CPU_INTERRUPT_TIMER);
+                    }
+                }
+            }
+        }
+        break;
+
+    case 0x00c0:
+        /* MPD: Memory Presence Detect Register.  */
+        break;
+
+    case 0x0100: /* AAR0 */
+    case 0x0140: /* AAR1 */
+    case 0x0180: /* AAR2 */
+    case 0x01c0: /* AAR3 */
+        /* AAR: Array Address Register.  */
+        /* All sorts of information about DRAM.  */
+        break;
+
+    case 0x0200: /* DIM0 */
+        /* DIM: Device Interrupt Mask Register, CPU0.  */
+        s->cchip.dim[0] = val;
+        cpu_irq_change(s->cchip.cpu[0], val & s->cchip.drir);
+        break;
+    case 0x0240: /* DIM1 */
+        /* DIM: Device Interrupt Mask Register, CPU1.  */
+        s->cchip.dim[0] = val;
+        cpu_irq_change(s->cchip.cpu[1], val & s->cchip.drir);
+        break;
+
+    case 0x0280: /* DIR0 (RO) */
+    case 0x02c0: /* DIR1 (RO) */
+    case 0x0300: /* DRIR (RO) */
+        break;
+
+    case 0x0340:
+        /* PRBEN: Probe Enable Register.  */
+        break;
+
+    case 0x0380: /* IIC0 */
+        s->cchip.iic[0] = val & 0xffffff;
+        break;
+    case 0x03c0: /* IIC1 */
+        s->cchip.iic[1] = val & 0xffffff;
+        break;
+
+    case 0x0400: /* MPR0 */
+    case 0x0440: /* MPR1 */
+    case 0x0480: /* MPR2 */
+    case 0x04c0: /* MPR3 */
+        /* MPR: Memory Programming Register.  */
+        break;
+
+    case 0x0580:
+        /* TTR: TIGbus Timing Register.  */
+        /* All sorts of stuff related to interrupt delivery timings.  */
+        break;
+    case 0x05c0:
+        /* TDR: TIGbug Device Timing Register.  */
+        break;
+
+    case 0x0600:
+        /* DIM2: Device Interrupt Mask Register, CPU2.  */
+        s->cchip.dim[2] = val;
+        cpu_irq_change(s->cchip.cpu[2], val & s->cchip.drir);
+        break;
+    case 0x0640:
+        /* DIM3: Device Interrupt Mask Register, CPU3.  */
+        s->cchip.dim[3] = val;
+        cpu_irq_change(s->cchip.cpu[3], val & s->cchip.drir);
+        break;
+
+    case 0x0680: /* DIR2 (RO) */
+    case 0x06c0: /* DIR3 (RO) */
+        break;
+
+    case 0x0700: /* IIC2 */
+        s->cchip.iic[2] = val & 0xffffff;
+        break;
+    case 0x0740: /* IIC3 */
+        s->cchip.iic[3] = val & 0xffffff;
+        break;
+
+    case 0x0780:
+        /* PWR: Power Management Control.   */
+        break;
+    
+    case 0x0c00: /* CMONCTLA */
+    case 0x0c40: /* CMONCTLB */
+    case 0x0c80: /* CMONCNT01 */
+    case 0x0cc0: /* CMONCNT23 */
+        break;
+
+    default:
+        cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
+        return;
+    }
+}
+
+static void dchip_write(void *opaque, hwaddr addr,
+                        uint64_t val, unsigned size)
+{
+    /* Skip this.  It's all related to DRAM timing and setup.  */
+}
+
+static void pchip_write(void *opaque, hwaddr addr,
+                        uint64_t v32, unsigned size)
+{
+    TyphoonState *s = opaque;
+    uint64_t val, oldval;
+
+    if (addr & 4) {
+        val = v32 << 32 | s->latch_tmp;
+        addr ^= 4;
+    } else {
+        s->latch_tmp = v32;
+        return;
+    }
+
+    switch (addr) {
+    case 0x0000:
+        /* WSBA0: Window Space Base Address Register.  */
+        s->pchip.win[0].base_addr = val;
+        break;
+    case 0x0040:
+        /* WSBA1 */
+        s->pchip.win[1].base_addr = val;
+        break;
+    case 0x0080:
+        /* WSBA2 */
+        s->pchip.win[2].base_addr = val;
+        break;
+    case 0x00c0:
+        /* WSBA3 */
+        s->pchip.win[3].base_addr = val;
+        break;
+
+    case 0x0100:
+        /* WSM0: Window Space Mask Register.  */
+        s->pchip.win[0].mask = val;
+        break;
+    case 0x0140:
+        /* WSM1 */
+        s->pchip.win[1].mask = val;
+        break;
+    case 0x0180:
+        /* WSM2 */
+        s->pchip.win[2].mask = val;
+        break;
+    case 0x01c0:
+        /* WSM3 */
+        s->pchip.win[3].mask = val;
+        break;
+
+    case 0x0200:
+        /* TBA0: Translated Base Address Register.  */
+        s->pchip.win[0].translated_base_pfn = val >> 10;
+        break;
+    case 0x0240:
+        /* TBA1 */
+        s->pchip.win[1].translated_base_pfn = val >> 10;
+        break;
+    case 0x0280:
+        /* TBA2 */
+        s->pchip.win[2].translated_base_pfn = val >> 10;
+        break;
+    case 0x02c0:
+        /* TBA3 */
+        s->pchip.win[3].translated_base_pfn = val >> 10;
+        break;
+
+    case 0x0300:
+        /* PCTL: Pchip Control Register.  */
+        oldval = s->pchip.ctl;
+        oldval &= ~0x00001cff0fc7ffull;       /* RW fields */
+        oldval |= val & 0x00001cff0fc7ffull;
+
+        s->pchip.ctl = oldval;
+        break;
+
+    case 0x0340:
+        /* PLAT: Pchip Master Latency Register.  */
+        break;
+    case 0x03c0:
+        /* PERROR: Pchip Error Register.  */
+        break;
+    case 0x0400:
+        /* PERRMASK: Pchip Error Mask Register.  */
+        break;
+    case 0x0440:
+        /* PERRSET: Pchip Error Set Register.  */
+        break;
+
+    case 0x0480:
+        /* TLBIV: Translation Buffer Invalidate Virtual Register.  */
+        break;
+
+    case 0x04c0:
+        /* TLBIA: Translation Buffer Invalidate All Register (WO).  */
+        break;
+
+    case 0x0500:
+        /* PMONCTL */
+    case 0x0540:
+        /* PMONCNT */
+    case 0x0800:
+        /* SPRST */
+        break;
+
+    default:
+        cpu_unassigned_access(cpu_single_env, addr, 1, 0, 0, size);
+        return;
+    }
+}
+
+static const MemoryRegionOps cchip_ops = {
+    .read = cchip_read,
+    .write = cchip_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,  /* ??? Should be 8.  */
+        .max_access_size = 8,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static const MemoryRegionOps dchip_ops = {
+    .read = dchip_read,
+    .write = dchip_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,  /* ??? Should be 8.  */
+        .max_access_size = 8,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 8,
+    },
+};
+
+static const MemoryRegionOps pchip_ops = {
+    .read = pchip_read,
+    .write = pchip_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,  /* ??? Should be 8.  */
+        .max_access_size = 8,
+    },
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void typhoon_set_irq(void *opaque, int irq, int level)
+{
+    TyphoonState *s = opaque;
+    uint64_t drir;
+    int i;
+
+    /* Set/Reset the bit in CCHIP.DRIR based on IRQ+LEVEL.  */
+    drir = s->cchip.drir;
+    if (level) {
+        drir |= 1ull << irq;
+    } else {
+        drir &= ~(1ull << irq);
+    }
+    s->cchip.drir = drir;
+
+    for (i = 0; i < 4; ++i) {
+        cpu_irq_change(s->cchip.cpu[i], s->cchip.dim[i] & drir);
+    }
+}
+
+static void typhoon_set_isa_irq(void *opaque, int irq, int level)
+{
+    typhoon_set_irq(opaque, 55, level);
+}
+
+static void typhoon_set_timer_irq(void *opaque, int irq, int level)
+{
+    TyphoonState *s = opaque;
+    int i;
+
+    /* Thankfully, the mc146818rtc code doesn't track the IRQ state,
+       and so we don't have to worry about missing interrupts just
+       because we never actually ACK the interrupt.  Just ignore any
+       case of the interrupt level going low.  */
+    if (level == 0) {
+        return;
+    }
+
+    /* Deliver the interrupt to each CPU, considering each CPU's IIC.  */
+    for (i = 0; i < 4; ++i) {
+        AlphaCPU *cpu = s->cchip.cpu[i];
+        if (cpu != NULL) {
+            uint32_t iic = s->cchip.iic[i];
+
+            /* ??? The verbage in Section 10.2.2.10 isn't 100% clear.
+               Bit 24 is the OverFlow bit, RO, and set when the count
+               decrements past 0.  When is OF cleared?  My guess is that
+               OF is actually cleared when the IIC is written, and that
+               the ICNT field always decrements.  At least, that's an
+               interpretation that makes sense, and "allows the CPU to
+               determine exactly how mant interval timer ticks were
+               skipped".  At least within the next 4M ticks...  */
+
+            iic = ((iic - 1) & 0x1ffffff) | (iic & 0x1000000);
+            s->cchip.iic[i] = iic;
+
+            if (iic & 0x1000000) {
+                /* Set the ITI bit for this cpu.  */
+                s->cchip.misc |= 1 << (i + 4);
+                /* And signal the interrupt.  */
+                cpu_interrupt(CPU(cpu), CPU_INTERRUPT_TIMER);
+            }
+        }
+    }
+}
+
+static void typhoon_alarm_timer(void *opaque)
+{
+    TyphoonState *s = (TyphoonState *)((uintptr_t)opaque & ~3);
+    int cpu = (uintptr_t)opaque & 3;
+
+    /* Set the ITI bit for this cpu.  */
+    s->cchip.misc |= 1 << (cpu + 4);
+    cpu_interrupt(CPU(s->cchip.cpu[cpu]), CPU_INTERRUPT_TIMER);
+}
+
+PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,
+                     qemu_irq *p_rtc_irq,
+                     AlphaCPU *cpus[4], pci_map_irq_fn sys_map_irq)
+{
+    const uint64_t MB = 1024 * 1024;
+    const uint64_t GB = 1024 * MB;
+    MemoryRegion *addr_space = get_system_memory();
+    MemoryRegion *addr_space_io = get_system_io();
+    DeviceState *dev;
+    TyphoonState *s;
+    PCIHostState *phb;
+    PCIBus *b;
+    int i;
+
+    dev = qdev_create(NULL, TYPE_TYPHOON_PCI_HOST_BRIDGE);
+    qdev_init_nofail(dev);
+
+    s = TYPHOON_PCI_HOST_BRIDGE(dev);
+    phb = PCI_HOST_BRIDGE(dev);
+
+    /* Remember the CPUs so that we can deliver interrupts to them.  */
+    for (i = 0; i < 4; i++) {
+        AlphaCPU *cpu = cpus[i];
+        s->cchip.cpu[i] = cpu;
+        if (cpu != NULL) {
+            cpu->alarm_timer = qemu_new_timer_ns(rtc_clock,
+                                                 typhoon_alarm_timer,
+                                                 (void *)((uintptr_t)s + i));
+        }
+    }
+
+    *p_rtc_irq = *qemu_allocate_irqs(typhoon_set_timer_irq, s, 1);
+
+    /* Main memory region, 0x00.0000.0000.  Real hardware supports 32GB,
+       but the address space hole reserved at this point is 8TB.  */
+    memory_region_init_ram(&s->ram_region, "ram", ram_size);
+    vmstate_register_ram_global(&s->ram_region);
+    memory_region_add_subregion(addr_space, 0, &s->ram_region);
+
+    /* TIGbus, 0x801.0000.0000, 1GB.  */
+    /* ??? The TIGbus is used for delivering interrupts, and access to
+       the flash ROM.  I'm not sure that we need to implement it at all.  */
+
+    /* Pchip0 CSRs, 0x801.8000.0000, 256MB.  */
+    memory_region_init_io(&s->pchip.region, &pchip_ops, s, "pchip0", 256*MB);
+    memory_region_add_subregion(addr_space, 0x80180000000ULL,
+                                &s->pchip.region);
+
+    /* Cchip CSRs, 0x801.A000.0000, 256MB.  */
+    memory_region_init_io(&s->cchip.region, &cchip_ops, s, "cchip0", 256*MB);
+    memory_region_add_subregion(addr_space, 0x801a0000000ULL,
+                                &s->cchip.region);
+
+    /* Dchip CSRs, 0x801.B000.0000, 256MB.  */
+    memory_region_init_io(&s->dchip_region, &dchip_ops, s, "dchip0", 256*MB);
+    memory_region_add_subregion(addr_space, 0x801b0000000ULL,
+                                &s->dchip_region);
+
+    /* Pchip0 PCI memory, 0x800.0000.0000, 4GB.  */
+    memory_region_init(&s->pchip.reg_mem, "pci0-mem", 4*GB);
+    memory_region_add_subregion(addr_space, 0x80000000000ULL,
+                                &s->pchip.reg_mem);
+
+    /* Pchip0 PCI I/O, 0x801.FC00.0000, 32MB.  */
+    /* ??? Ideally we drop the "system" i/o space on the floor and give the
+       PCI subsystem the full address space reserved by the chipset.
+       We can't do that until the MEM and IO paths in memory.c are unified.  */
+    memory_region_init_io(&s->pchip.reg_io, &alpha_pci_bw_io_ops, NULL,
+                          "pci0-io", 32*MB);
+    memory_region_add_subregion(addr_space, 0x801fc000000ULL,
+                                &s->pchip.reg_io);
+
+    b = pci_register_bus(dev, "pci",
+                         typhoon_set_irq, sys_map_irq, s,
+                         &s->pchip.reg_mem, addr_space_io, 0, 64, TYPE_PCI_BUS);
+    phb->bus = b;
+
+    /* Pchip0 PCI special/interrupt acknowledge, 0x801.F800.0000, 64MB.  */
+    memory_region_init_io(&s->pchip.reg_iack, &alpha_pci_iack_ops, b,
+                          "pci0-iack", 64*MB);
+    memory_region_add_subregion(addr_space, 0x801f8000000ULL,
+                                &s->pchip.reg_iack);
+
+    /* Pchip0 PCI configuration, 0x801.FE00.0000, 16MB.  */
+    memory_region_init_io(&s->pchip.reg_conf, &alpha_pci_conf1_ops, b,
+                          "pci0-conf", 16*MB);
+    memory_region_add_subregion(addr_space, 0x801fe000000ULL,
+                                &s->pchip.reg_conf);
+
+    /* For the record, these are the mappings for the second PCI bus.
+       We can get away with not implementing them because we indicate
+       via the Cchip.CSC<PIP> bit that Pchip1 is not present.  */
+    /* Pchip1 PCI memory, 0x802.0000.0000, 4GB.  */
+    /* Pchip1 CSRs, 0x802.8000.0000, 256MB.  */
+    /* Pchip1 PCI special/interrupt acknowledge, 0x802.F800.0000, 64MB.  */
+    /* Pchip1 PCI I/O, 0x802.FC00.0000, 32MB.  */
+    /* Pchip1 PCI configuration, 0x802.FE00.0000, 16MB.  */
+
+    /* Init the ISA bus.  */
+    /* ??? Technically there should be a cy82c693ub pci-isa bridge.  */
+    {
+        qemu_irq isa_pci_irq, *isa_irqs;
+
+        *isa_bus = isa_bus_new(NULL, addr_space_io);
+        isa_pci_irq = *qemu_allocate_irqs(typhoon_set_isa_irq, s, 1);
+        isa_irqs = i8259_init(*isa_bus, isa_pci_irq);
+        isa_bus_irqs(*isa_bus, isa_irqs);
+    }
+
+    return b;
+}
+
+static int typhoon_pcihost_init(SysBusDevice *dev)
+{
+    return 0;
+}
+
+static void typhoon_pcihost_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = typhoon_pcihost_init;
+    dc->no_user = 1;
+}
+
+static const TypeInfo typhoon_pcihost_info = {
+    .name          = TYPE_TYPHOON_PCI_HOST_BRIDGE,
+    .parent        = TYPE_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(TyphoonState),
+    .class_init    = typhoon_pcihost_class_init,
+};
+
+static void typhoon_register_types(void)
+{
+    type_register_static(&typhoon_pcihost_info);
+}
+
+type_init(typhoon_register_types)