summaryrefslogtreecommitdiffstats
path: root/programmer.h
Commit message (Collapse)AuthorAgeFilesLines
* dediprog: use ordinary USB devs arrayStefan Tauner2016-02-221-0/+1
| | | | | | | | | | Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1942. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* pickit2_spi: use ordinary USB devs arrayStefan Tauner2016-02-221-0/+1
| | | | | | | | | | Even though there is currently only one USB device ID in the wild using our standard way to define the devices creates nicer output for -L and -z. Corresponding to flashrom svn r1941. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for WCH CH341A as an SPI programmerUrja Rannikko2016-01-311-0/+13
| | | | | | | | Corresponding to flashrom svn r1921. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add a bunch of new/tested stuff and various small changes 24Stefan Tauner2016-01-231-2/+2
| | | | | | | | | Tested mainboards: OK: - ASRock G31M-GS Binary file (standard input) matches Corresponding to flashrom svn r1917.
* Add atapromise programmerJoseph C. Lehner2016-01-161-0/+10
| | | | | | | | | | | | | | | | | | Supported controllers are Promise PDC20262 (FastTrak66/Ultra66), PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100). At least the Ultra100 only has address lines A0-A14 wired up, limiting addressable chip size to 32 kB. The flash chips mounted on those controllers usually is 128 kB, i.e. parts of the flash chip are inaccessible. As a workaround, the driver implicitly truncates the size of all flash chips to 32 kB. Works well for the factory installed flash. Do NOT use as a generic programmer for chips >32 kB. Corresponding to flashrom svn r1916. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
* serprog: allow to omit specifying a baud rateStefan Tauner2016-01-041-3/+1
| | | | | | | | | | | On USB-based serial connections (VCP) the requested baud rate usually does not matter (much). Remove the arbitrary restriction and use whatever default values the OS/hardware provides. Corresponding to flashrom svn r1907. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* serprog: Fix FWH/LPC by implementing serprog_mapUrja Rannikko2015-06-291-0/+1
| | | | | | | | | | | | | The serprog protocol does only transmit 24 bit-wide address and ignores the top 8 bit. This is fine as long as the underlying hardware ignores the latter anyway (which is the case for parallel chips that even lack the respective pins). FWH/LPC chips, however, operate on a full 32-bit (LPC) or 28-bit (FWH) address space and would fail with the fallback mapping to NULL. Corresponding to flashrom svn r1895. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for the Microchip PICkit2 as an SPI programmerJustin Chevrier2015-02-081-0/+11
| | | | | | | | | | | | | | | This patch was inspired by the code in AVRDude (open source Atmel AVR programmer) to support the PICkit2 written by Doug Brown [1]. The Dediprog code in flashrom was used as the template for this code with some reference to the ft2232 code as well. [1] - https://github.com/steve-m/avrdude/blob/master/pickit2.c Corresponding to flashrom svn r1881. Signed-off-by: Justin Chevrier <jchevrier@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 22Stefan Tauner2015-02-081-3/+1
| | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - AOpen UK79G-1394 (used in EZ18 barebones) Reported by Lawrence Gough - ASUS M4N78 SE Reported by Dima Veselov - ASUS P5LD2-VM Mark board enable as tested (reported by Dima Veselov) - GIGABYTE GA-970A-UD3P (rev. 2.0) Reported by trucmar on IRC - GIGABYTE GA-990FXA-UD3 (rev. 4.0) Reported by ROKO__ on IRC - GIGABYTE GA-H77-DS3H (rev. 1.1) Reported by Evgeniy Edigarev - GIGABYTE GA-P55-USB3 (rev. 2.0) Binary file (standard input) matches Corresponding to flashrom svn r1879.
* Unify target OS and CPU architecture checksStefan Tauner2015-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | We do CPU architecture checks once for the makefile in arch.h and once for HW access abstraction in hwaccess.c. This patch unifies related files so that they can share the checks to improve maintainability and reduce the chance of inconsistencies. Furthermore, it refines some of the definitions, which - adds "support" for AARCH64 and PPC64, - adds big-endian handling on arm as well as LE handling on PPC64, - fixes compilation of internal.c on AARCH64 and PPC64. Additionally, this patch continues to unify all OS checks in flashrom by adding a new helper macro IS_WINDOWS. The old header file for architecture checking is renamed to platform.h to reflect its broader scope and all new macros are add in there. Corresponding to flashrom svn r1864. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for the MSTAR I2C ISP protocolAlexandre Boeglin2014-12-201-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basically, among other chips, MSTAR manufactures SoCs that equip TV sets and computer screens, and it seems that all of their products use the same in-system programming protocol. Basically, they use the DDC channel of VGA or DVI connectors, which is actually an I2C bus, to encapsulate SPI frames (the flash chip is connected to the SoC through an SPI bus). I wrote this patch since the screen I bought had a software bug, and the manufacturer only released a new firmware binary, but no tool or instructions on flashing it. More details can be found here: http://boeglin.org/blog/index.php?entry=Flashing-a-BenQ-Z-series-for-free(dom) I only read code from Linux kernel archives published by Acer to figure out the protocol (for a touchscreen controller and an NFC chip, both by MSTAR, that share the same ISP protocol), so I don't think there are any legal problems with it. Compilation is currently disabled by default in the Makefile. If in doubt, additional Makefile bugs were added by Stefan. Corresponding to flashrom svn r1860. Signed-off-by: Alexandre Boeglin <alex@boeglin.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel Wildcat Point PCHDuncan Laurie2014-08-201-0/+1
| | | | | | | | | | | The Wildcat Point PCH can be paired with Broadwell or Haswell. This patch was essentially backported from ChromiumOS commit 9bd2af8. Corresponding to flashrom svn r1845. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for Intel Silvermont: Bay Trail, Rangeley and AvotonDuncan Laurie2014-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | The core of this patch to support Bay Trail originally came from the Chromiumos flashrom repo and was modified by Sage to support the Rangeley/Avoton parts as well. Because that was not complicated enough already Stefan Tauner refactored and refined everything. Bay Trail seems to be the first Atom SoC able to support hwseq. No SPI Programming Guide could be obtained so it is handled similarly to Lynx Point which seems to be its nearest relative. Tested-by: Marc Jones <marcj303@gmail.com> Tested-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Tested-by: Thomas Reardon <thomas_reardon@hotmail.com> Tested-by: Wen Wang <wen.wang@adiengineering.com> Corresponding to flashrom svn r1844. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Marc Jones <marcj303@gmail.com> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine handling chips that exceed maximum programmer sizesStefan Tauner2014-08-151-1/+1
| | | | | | | | | | | | | | | | - Change check_max_decode() to return the number of (common) busses where the flash chip exceeds the supported size of the programmer. - Refine its signature to use a flashctx pointer only. - Move CLI-related bits to cli_classic.c. - Rename check_max_decode() to count_max_decode_exceedings() to better reflect what it (now) really does. - Refine the messages printed by the caller to better integrate with the new setup, and simplify them. Corresponding to flashrom svn r1842. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor some CLI-relevant partsStefan Tauner2014-08-081-1/+0
| | | | | | | | | | | | | | | Begin to move functions that clearly belong to the (command line) user interface out of flashrom's core files like flashrom.c. - Refine messages within check_chip_supported(), rename it to print_chip_support_status() and move it to newly created cli_common.c. - Move flashbuses_to_text() to cli_common.c as well. - Move global verbosity variables to cli_output.c. Corresponding to flashrom svn r1841. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add new programmer for SPI EEPROMs attached to Intel 82580 NICsRicardo Ribalda Delgado2014-07-281-0/+9
| | | | | | | | | | | | | | | | | This patch lets you read and write the EEPROM on 82580-based gigabit NIC cards. So far it has been tested on copper NICs only, but other variants employing this controller should work too. It is a nice substitution for the official eeupdate tool. Speed is quite decent: less than 4 seconds for erases or writes of 32 kB. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Corresponding to flashrom svn r1832. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Rename programmer registration functionsCarl-Daniel Hailfinger2014-07-191-16/+16
| | | | | | | | | | | | Register_programmer suggests that we register a programmer. However, that function registers a master for a given bus type, and a programmer may support multiple masters (e.g. SPI, FWH). Rename a few other functions to be more consistent. Corresponding to flashrom svn r1831. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add selfcheck_board_enables()Stefan Tauner2014-06-121-0/+1
| | | | | | | | | | | | Check for NULL termination of the array, that each board has the two main PCI ID sets defined, that coreboot vendor and model fields are either both set or unset, and that at least either an enable function or a max decode size is available. Corresponding to flashrom svn r1821. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move global io_base_addr into compilation unitsStefan Tauner2014-06-011-2/+1
| | | | | | | Corresponding to flashrom svn r1813. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add IT8212F as programmerStefan Tauner2014-06-011-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | This PCI PATA controller can use 3V parallel flash up to 128 kB. My card was identified as: PCI 1283:8212, subsystem 1283:0001. and labelled as: Innovision Multimedia LTD. EIO ATA133 RAID (DM-8401 Ver A) This particular card did not require setting of any GPIO signals to enable flash writing. My card has Pm39LV512 in PLCC32 package without socket. Rebased by Stefan (automatic cleanup, some PCI changes, changed enable bit handling). Committed with test state NT because the rebased version was not tested on real hardware (yet). Binary file (standard input) matches Corresponding to flashrom svn r1812.
* Add VIA VT6421A LPC programmer driverJonathan Kollasch2014-06-011-0/+10
| | | | | | | | | | | | | | | Due to the mysterious address handling of this chip the user can specify a base address with the offset parameter, e.g.: flashrom -p atavia:offset=0xFFF00000 Thanks to Idwer Vollering for his iterative testing of this code, as well as to Martijn Bastiaan who did the last tests before merging. Corresponding to flashrom svn r1809. Signed-off-by: Jonathan Kollasch <jakllsch@kollasch.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* sbxxx: Add support for new AMD SPI controllerWei Hu2014-05-161-0/+1
| | | | | | | | | | | | | | This patch adds support for the "SPI 100" SPI engine in Yangtze FCHs (found in Kabini and Temash). Tested reading/writing on ASRock IMB-A180 and PC Engines' APU board. Corresponding to flashrom svn r1794. Signed-off-by: Wei Hu <wei@aristanetworks.com> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add 'const' keyword to chip write and other function prototypesMark Marshall2014-05-091-9/+9
| | | | | | | | | | Inspired by and mostly based on a patch Corresponding to flashrom svn r1789. Signed-off-by: Mark Marshall <mark.marshall@omicron.at> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Make delay values unsignedStefan Tauner2014-05-021-5/+5
| | | | | | | | | | | | | | | There is no reason for negative delays in our use cases: - We don't need it (to work around any quirks). - sleep() (POSIX) uses an unsigned argument. - usleep() (POSIX) uses an unsigned argument. - Sleep() (Windows) uses an unsigned argument. Change all callees as well (without any complications). Corresponding to flashrom svn r1782. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Clean up physmap, fix unaligned mapping problemsCarl-Daniel Hailfinger2014-03-051-1/+2
| | | | | | | | | | | | Convert all physmaps in dmi.c to use aligned readonly maps. Convert all physmaps in cbtable.c to use unaligned readonly maps. Make physunmap() a generic architecture-independent wrapper. Add physunmap_unaligned() to complement physmap*_unaligned(). Corresponding to flashrom svn r1765. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refactor Intel Chipset EnablesStefan Tauner2013-10-251-6/+6
| | | | | | | | | | | | | | | | | | | | | - Combine enable_flash_ich_4e() and enable_flash_ich_dc() to enable_flash_ich_fwh(). - Remove unjustified (chipset) name parameters from various enable_flash_ich* functions. - Make Poulsbo and Tunnel Creek use generic enables by refining existing functions to work with them, including everything in ichspi.c. - Refactor enable_flash_ich_fwh_decode() to be called unconditionally for all chipsets. - Add support for Intel Atom Centerton (S12x0). - Recombine ICH2/3/4/5 to CHIPSET_ICH2345 because we treat them equally anyway. - Move spibar handling out of ich_init_spi() into enable_flash_ich_spi() - Various small cleanups. Corresponding to flashrom svn r1761. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Use ich_generation parameter in enable functions prior to ICH7Stefan Tauner2013-09-141-2/+7
| | | | | | | | | Follow the style used from ICH7 onwards to pass ich_generation parameter to lower-level functions on older ICH chipsets too. Binary file (standard input) matches Corresponding to flashrom svn r1747.
* Remove exit call and mayfail parameter from physmap_common()Stefan Tauner2013-09-141-1/+1
| | | | | | | | | | | | | The only call path where exit was reached was from physmap functions. Callers of physmap() et al. which were not prepared to handle ERROR_PTR return values have been adjusted. physmap_try_ro() has been renamed to physmap_ro() and physmap_common() slightly refactored due to the now removed *FAIL parameters. Binary file (standard input) matches Corresponding to flashrom svn r1745.
* Add an internal DMI decoderSean Nelson2013-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we had to rely on dmidecode to decode the DMI/SMBIOS table. This patch integrates a DMI decoder into flashrom. The old behavior of calling dmidecode can be brought back by using CONFIG_INTERNAL_DMI=no. Significant portions of this patch were taken from dmidecode, hence add its authors to the copyright notice (dmidecode is also GPL2+). We do a few things differently though. First of all we do more bounds checking to prevent accessing unmapped memory. We do not support disovery via EFI (yet), but memory scanning only. We handle the chassis-type lock bit correctly which dmidecode did not for a long while. The API to the rest of flashrom remains stable, but the output changes slightly. To share as much code as possible (which actually is not much), i have added dmi_fill methods that get called in dmi_init. They are reponsible to fill the dmi_strings array and setting the is_laptop variable. After it is called, dmi_init prints all dmi_strings. Previously the strings were printed in the order they were discovered, followed by the chassis-type, which is now output earlier (in dmi_fill). Because DJGPP does not support strnlen a simple implementation was added for it. This is still only available on x86; actually it is not even compiled in for other architectures at all anymore. Tested-by: Maciej Pijanka <maciej.pijanka@gmail.com> Tested-by: Idwer Vollering <vidwer@gmail.com> Corresponding to flashrom svn r1735. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Get rid of sp_die()Stefan Tauner2013-08-241-1/+0
| | | | | | | | | | | | | | - Add return values to sp_flush_stream(), sp_pass_writen(), sp_execute_opbuf(), sp_execute_opbuf_noflush(), sp_check_opbuf_usage(), sp_do_read_n(). - Use those return values to propagate errors instead of exiting. In some places this has to wait for core API changes (error handling for chip_readb, chip_readn, chip_write) hence comments are added instead. Corresponding to flashrom svn r1719. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce serialport_config()Stefan Tauner2013-08-231-0/+1
| | | | | | | | | | This allows to easily reconfigure a serial port as needed in the Bus Pirate speedup patch. Corresponding to flashrom svn r1717. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Automatically unmap physmap()sStefan Tauner2013-08-141-0/+1
| | | | | | | | | | | | Similarly to the previous PCI self-clean up patch this one allows to get rid of a huge number of programmer shutdown functions and makes introducing bugs harder. It adds a new function rphysmap() that takes care of unmapping at shutdown. Callers are changed where it makes sense. Corresponding to flashrom svn r1714. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add a bunch of new/tested stuff and various small changes 19Stefan Tauner2013-08-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASUS P8H77-V LE http://www.flashrom.org/pipermail/flashrom/2013-June/011127.html - HP Pegatron IPMEL-AE (Evans-GL6) Reported by Idwer on IRC - MSI MS-7379 (G31M) http://paste.flashrom.org/view.php?id=1726 - MSI MS-7816 (H87-G43) http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html - MSI MS-9830 (IM-945GSE-A, A9830IMS) http://paste.flashrom.org/view.php?id=1730 - Supermicro X8SAX http://paste.flashrom.org/view.php?id=1717 NOT OK: - Intel D2700MUD http://paste.flashrom.org/view.php?id=1723 - Intel DQ45CB http://www.flashrom.org/pipermail/flashrom/2013-August/011369.html Chipsets: - Add PCI ID for Intel's Coleto Creek. - Mark Intel H87 (0x8c4a) as OK. http://www.flashrom.org/pipermail/flashrom/2013-July/011349.html Miscellaneous: - ichspi: Fix printing address ranges if space is divided by FPB. - Tiny other stuff. Corresponding to flashrom svn r1709. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* sbxxx: Handle active IMCs in AMD chipsetsRudolf Marek2013-07-251-0/+3
| | | | | | | | | | | | Detect and temporarily disable the IMC while accessing the flash. Disable writes on default, but allow the user to enforce it. Corresponding to flashrom svn r1704. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: David Hendricks <dhendrix@google.com>
* Uintptr_t-ify map_flash_region functionsStefan Tauner2013-07-171-5/+5
| | | | | | | | | | | | | | | | | | | Unsigned long is not the right type for manipulating pointer values. Since C99 there are suitable unsigned and signed types available, namely uintptr_t and intptr_t respectively. Use them in functions assigned to programmers' map_flash_region fields and their callers where applicable. This patch also changes the display width of all associated address values in physmap.c to 16/8 hex characters depending on the actual size by introducing a macro PRIxPTR_WIDTH and exploiting printf's * field width specifier. Corresponding to flashrom svn r1701. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Usleep() is not found in all versions of MinGW, use Sleep() on WindowsMaksim Kuleshov2013-04-051-0/+1
| | | | | | | | | | Handle long sleeps on non-Windows correctly. Corresponding to flashrom svn r1667. Signed-off-by: Maksim Kuleshov <mmcx@mail.ru> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce serialport_write_nonblock()Stefan Tauner2013-04-011-0/+1
| | | | | | | | | | | | | It seems useful to have a generic and platform-independent method to read and write to a serial port without blocking. This is the write part. This allows to get rid of the explicit temporary disabling of blocking I/O in serprog's sp_synchronize(). Corresponding to flashrom svn r1662. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Replace sp_sync_read_timeout() with serialport_read_nonblock()Stefan Tauner2013-04-011-0/+1
| | | | | | | | | | | | | | | It seems useful to have a generic and platform-independent method to read and write to a serial port without blocking. This is the read part. It stores the current blocking properties before disabling blocking and restores them after reading. The timeout is implemented as previously by retrying every millisecond until the timeout is reached or enough characters are available. Corresponding to flashrom svn r1661. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add Altera USB-Blaster SPI programmerJames Laird2013-03-271-0/+12
| | | | | | | | | | | Adds support for the Altera USB-Blaster programming dongle in Active Serial (AS) mode. Tested on both original product and a clone dongle. Binary file (standard input) matches Corresponding to flashrom svn r1658. Signed-off-by: James Laird <jhl@mafipulation.org>
* Add support for Intel Lynx Point low-power and WellsburgDuncan Laurie2013-03-151-1/+3
| | | | | | | | | | | | | | New IDs taken from Intel's patches for the Linux kernel. Also, refine original Lynx Point naming etc. Based on the chromiumos patch Change-Id: I303a05baa80e4449e70d20adf78ebc7128b88d8e Corresponding to flashrom svn r1656. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Decouple BAR reading from pci device init, handle errors gracefullyCarl-Daniel Hailfinger2013-01-051-18/+18
| | | | | | | | | Pcidev_init() now returns struct pci_device * instead of a BAR stored in PCI config space. This allows for real error checking instead of having exit(1) everywhere in pcidev.c. Binary file (standard input) matches Corresponding to flashrom svn r1644.
* Unify PCI init and let pcidev clean itself upStefan Tauner2013-01-041-0/+1
| | | | | | | | | | | | | | | | | | | Previously the internal programmer used its own code to initialize pcilib. This patch extracts the common code from the internal programmer and pcidev_init() into pcidev_init_common(). This fixes the non-existent PCI cleanup of the internal programmer and adds an additional safety by checking for an already existing PCI context. We got a nice shutdown function registration infrastructure, but did not use it very wisely. Instead we added shutdown functions to a myriad of programmers unnecessarily. In this patch we get rid of those that do only call pci_cleanup(pacc) by adding a shutdown function the pcidev.c itself that gets registered by pcidev_init(). Corresponding to flashrom svn r1642. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Constify parameters and globalsNico Huber2012-12-301-1/+1
| | | | | | | | | | | This makes some stuff const (partially to get a more convenient libflashrom interface). Corresponding to flashrom svn r1639. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify usbdev_status and pcidev_status into dev_entryStefan Tauner2012-12-271-37/+22
| | | | | | | | | | | | | | | | | | | Once upon a time usbdev_status was created for the ft2232 programmer. Its IDs are semantically different to pcidev_status because they indicate USB instead of PCI IDs, but apart from that both data structures are equal. This change makes life easier for everything involved in handling and printing the status of devices that is noted in those structures by combining them into dev_entry. It is still possible to distinguish between PCI and USB devices indirectly by using the struct programmer's type field. Also, add a programmer column to the PCI and USB devices lists. Corresponding to flashrom svn r1632. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor PCI and USB device status printingStefan Tauner2012-12-271-14/+27
| | | | | | | | | | | | | | | | | To be able to get rid of lots of #ifdefs and centralize programmer-specific data more... - introduce two new fields to struct programmer_entry, namely enum type (OTHER, USB, PCI) and union devs (pcidev_status, usbdev_status or char *note). - use those fields to generate device listings in print.c and print_wiki.c. Bonus: add printing of USB devices to print_wiki.c and count supported PCI and USB devices. Corresponding to flashrom svn r1631. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add general programmer sanity checksStefan Tauner2012-12-261-3/+1
| | | | | | | | | And remove the completely unused vendor field. Corresponding to flashrom svn r1630. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix flashrom running on boards with corebootStefan Tauner2012-09-241-1/+1
| | | | | | | | | | | | | | In r1577 we removed the discrimination of coreboot IDs and user-specified mainboards. The problem is that the board enable code required to find a board enable if either of these model strings were set. Therefore boards running coreboot that do not need a board enable failed to execute flashrom since then. This patch fixes this by handling coreboot IDs and user-supplied IDs differently again. Corresponding to flashrom svn r1605. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Fix compilation with MinGWStefan Tauner2012-09-011-0/+2
| | | | | | | | | | This was broken since r1557 when we got rid of some exit calls, but returned -1 instead which is not a valid HANDLE value. Corresponding to flashrom svn r1591. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Make struct flashchip a field in struct flashctx instead of a complete copyCarl-Daniel Hailfinger2012-08-251-1/+1
| | | | | | | | | | | | All the driver conversion work and cleanup has been done by Stefan. flashrom.c and cli_classic.c are a joint work of Stefan and Carl-Daniel. Corresponding to flashrom svn r1579. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix VIA VX*** supportHelge Wagner2012-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Helge Wagner's patch that added VIA VX900 chipset support made me look closer at the datasheets which led to some concise documentation about newer VIA chipsets: http://flashrom.org/VIA Based on that this patch adds full support for VX800/VX820, VX855/VX875 and VX900, including SPI and LPC. VT8237S was not changed (SPI support only) because there is no public datasheet and it is not clear how to distinguish between LPC and SPI strapping and investigations in (NDAed) documents have not brought up anything conclusively. enable_flash_vt823x could probably be enhanced too due to various ignored LPC options of the chipset. Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Corresponding to flashrom svn r1578. Signed-off-by: Helge Wagner <Helge.Wagner@ge.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
OpenPOWER on IntegriCloud