summaryrefslogtreecommitdiffstats
path: root/buspirate_spi.c
Commit message (Collapse)AuthorAgeFilesLines
* Add struct flashctx * parameter to all functions accessing flash chipsCarl-Daniel Hailfinger2011-12-181-4/+10
| | | | | | | | | | | | | | | | All programmer access function prototypes except init have been made static and moved to the respective file. A few internal functions in flash chip drivers had chipaddr parameters which are no longer needed. The lines touched by flashctx changes have been adjusted to 80 columns except in header files. Corresponding to flashrom svn r1474. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Unsignify lengths and addresses in chip functions and structsStefan Tauner2011-11-231-1/+2
| | | | | | | | | | Push those changes forward where needed to prevent new sign conversion warnings where possible. Corresponding to flashrom svn r1470. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove unneeded inclusions of chipdrivers.hStefan Tauner2011-08-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | This is related to the spi split patch as discussed in: http://www.flashrom.org/pipermail/flashrom/2010-February/thread.html#2364 the old commit (r914) log notes: "Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c" there still remain a few cases where chipdrivers.h is needed: dediprog.c (spi_read_chunked and spi_write_chunked) it87spi.c (due to spi_write_enable and spi_read_status_register) wbsio_spi.c (spi_programmer registration only) besides that, there are also non-spi files that do not need it. also, add flash.h to chipdrivers.h because it uses some types of it and remove flashchips.h from print.c Corresponding to flashrom svn r1414. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Fixup of r1397Carl-Daniel Hailfinger2011-08-151-1/+3
| | | | | | | | | | | | | | - Mixing uninitialized and initialized local variables leads to confusion. - ft2232_spi error cases should have gotten some error handling, and that's the reason the curly braces were there. - Fixing typos/wording in some places would have been nice given that those places were touched anyway. Corresponding to flashrom svn r1413. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Random whitespace and coding-style fixesUwe Hermann2011-07-281-12/+11
| | | | | | | | | | | | Also, indentation fixes, e.g. due to conversion to msg_*, use ARRAY_SIZE where possible, wrap overly long line, etc. Compile-tested. There should be no functional changes. Corresponding to flashrom svn r1397. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add a bunch of new/tested stuff and various small changes 4Stefan Tauner2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add Asus E35M1-I DELUXE to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006918.html - add Asus M3A to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007085.html - add Freetech P6F91i to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006800.html - add GA-M720-US3 to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007096.html - add GA-MA770-UD3 (rev. 2.1) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006879.html - add GA-965GM-S2 to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006746.html - add HP xw4400 (0A68h) to boards_known http://paste.flashrom.org/view.php?id=686 - add MSI MS-6566 (845 Ultra-C) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/006908.html - add MSI MS-7698 (E350IA-E45) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-June/007003.html - add PCCHIPS M863G (V5.1A) to boards_known http://www.flashrom.org/pipermail/flashrom/2011-July/007084.html - modify the X8SIE entry in boards_known with the information from "fuzzy" http://paste.flashrom.org/view.php?id=669 - mark W29C020(C)/W29C022 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-June/006800.html - mark W49V002A as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007084.html - mark M25P128 as fully tested http://www.flashrom.org/pipermail/flashrom/2011-June/006843.html - mark SST39SF010A as fully tested http://www.flashrom.org/pipermail/flashrom/2011-July/007115.html - correct entries for GA-K8NS Pro-939 (was ultra before. thanks uwe!) - another tiny fix for "a small fix"/r1321 Without this you will get broken bus names "Unknow" and "Non-SP". Note to self: don't self-ack even fairly trivial patches. - fix spew output of spi_rems in spi25.c - add URL to ASUS M3A76-CM - rename all Winbond W25x chips to W25X - fixes some common misspellings/typos in comments: lenght->length 2 ocassional->occasional 1 unsucessfull->unsuccessful 1 upto->up to 5 the patch for M25P128 is Binary file (standard input) matches Corresponding to flashrom svn r1367.
* Use shutdown callback mechanism to shutdown programmersDavid Hendricks2011-06-141-35/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch attempts to resolve some programmer shutdown ordering issues by having the programmer init functions register shutdown callbacks explicitly wherever it makes most sense. Before, assumptions were made that could lead to the internal programmer's state changing before the external programmer could be shut down properly. Now, each programmer cleans up after itself and (hopefully) performs each operation in the correct order. As a side-effect, this patch gives us a better usage model for reverse operations such as rpci_* and rmmio_*. In the long-run, this should make reversing the initialization process easier to understand, less tedious, and less error-prone. In short, this patch does the following: - Registers a shutdown callback during initialization for each programmer. - Kills the .shutdown function pointer from programmer_entry struct. Also, make most shutdown functions static. - Adds a few minor clean-ups and corrections (e.g. missing physunmap() calls). TODO: Remove forward declaration of serprog_shutdown() (added to simplify diff) Corresponding to flashrom svn r1338. Signed-off-by: David Hendricks <dhendrix@google.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation for CONFIG_INTERNAL=noCarl-Daniel Hailfinger2011-06-091-0/+5
| | | | | | | | | | | | CONFIG_INTERNAL implies Super I/O support and NEED_PCI. NEED_PCI is only used to guard PCI stuff which may be needed for external PCI-based programmers. That way, using #if NEED_PCI can be avoided inside #if CONFIG_INTERNAL. Corresponding to flashrom svn r1326. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill central list of SPI programmersMichael Karcher2011-05-111-3/+15
| | | | | | | | | | | | | | | | | | Remove the array spi_programmer, replace it by dynamic registration instead. Also initially start with no busses supported, and switch to the default non-SPI only for the internal programmer. Also this patch changes the initialization for the buses_supported variable from "everything-except-SPI" to "nothing". All programmers have to set the bus type on their own, and this enables register_spi_programmer to just add the SPI both for on-board SPI interfaces (where the internal programmer already detected the other bus types), as well as for external programmers (where we have the default "none"). Corresponding to flashrom svn r1299. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Factor out SPI write/read chunking wrappersMichael Karcher2011-05-111-10/+0
| | | | | | | Corresponding to flashrom svn r1298. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Remove duplicate includes from the codeStefan Reinauer2010-10-061-1/+0
| | | | | | | Corresponding to flashrom svn r1196. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Binary file (standard input) matchesCarl-Daniel Hailfinger2010-09-161-0/+21
| | | | Corresponding to flashrom svn r1178.
* Speed up Bus Pirate by exploiting the FTDI FIFOCarl-Daniel Hailfinger2010-07-291-20/+22
| | | | | | | | | | | | | | | If we violate the raw SPI communication protocol requirements of the Bus Pirate (namely, waiting for the completion of one command before sending the next one), we can reduce the number of round trips by a factor of 3. The FT2232 chip present in the Bus Pirate has a big enough buffer (at least 128 bytes IIRC) to avoid overflows in the tiny buffer of the Bus Pirate PIC. Thanks to Daniel Flinkmann for sponsoring development of this patch. Tested-by: Daniel Flinkmann <DFlinkmann@gmx.de> Corresponding to flashrom svn r1120. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Daniel Flinkmann <dflinkmann@gmx.de>
* Split off programmer.h from flash.hCarl-Daniel Hailfinger2010-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | Programmer specific functions are of absolutely no interest to any file except those dealing with programmer specific actions (special SPI commands and the generic core). The new header structure is as follows (and yes, improvements are possible): flashchips.h flash chip IDs chipdrivers.h chip-specific read/write/... functions flash.h common header for all stuff that doesn't fit elsewhere hwaccess.h hardware access functions programmer.h programmer specific functions coreboot_tables.h header from coreboot, internal programmer only spi.h SPI command definitions Corresponding to flashrom svn r1112. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* We have a generic unlocking infrastructureCarl-Daniel Hailfinger2010-07-141-1/+0
| | | | | | | | | | Use it for SPI chips. Actually check if the unlock worked instead of just assuming it worked. Corresponding to flashrom svn r1082. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Convert SPI chips to partial write, but wrap the write functions in a compat ↵Carl-Daniel Hailfinger2010-07-141-12/+2
| | | | | | | | | | | | layer to allow converting the rest of flashrom later I actually have patches for most of the remaining conversion, but I wanted to get this out and reviewed first. Tested on Intel NM10 by David Hendricks. Corresponding to flashrom svn r1080. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Make programmer_param static by converting all users to extract_programmer_paramCarl-Daniel Hailfinger2010-07-081-2/+2
| | | | | | | | | | Programmer parameters can no longer be separated with a colon, they have to be separated with a comma. Corresponding to flashrom svn r1072. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Various places in the flashrom source feature custom parameter extraction ↵Carl-Daniel Hailfinger2010-07-061-14/+7
| | | | | | | | | | | | | | | | | from programmer_param This led to wildly differing syntax for programmer parameters, and it also voids pretty much every assumption you could make about programmer_param. The latter is a problem for libflashrom. Use extract_param everywhere, clean up related code and make it more foolproof. Add two instances of exit(1) where we have no option to return an error. Remove six instances of exit(1) where returning an error was possible. WARNING: This changes programmer parameter syntax for a few programmers! Corresponding to flashrom svn r1070. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Kill global variables, constants and functions if local scope sufficesCarl-Daniel Hailfinger2010-07-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Constify variables where possible. Initialize programmer-related variables explicitly in programmer_init to allow running programmer_init from a clean state after programmer_shutdown. Prohibit registering programmer shutdown functions before init or after shutdown. Kill some dead code. Rename global variables with namespace-polluting names. Use a previously unused locking helper function in sst49lfxxxc.c. This is needed for libflashrom. Effects on the binary size of flashrom are minimal (300 bytes shrinkage), but the data section shrinks by 4384 bytes, and that's a good thing if flashrom is operating in constrained envionments. Corresponding to flashrom svn r1068. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* So far, we have up to 4 different names for the same thing (ignoring ↵Carl-Daniel Hailfinger2010-05-311-1/+1
| | | | | | | | | | | | | | | | | capitalization) CONFIG_FT2232SPI (makefile config option) FT2232_SPI_SUPPORT (#define) ft2232spi (programmer name) ft2232_spi.c (programmer file) Use CONFIG_* with underscores for makefile config options and #defines and kill the useless _SUPPORT idiom. Use lowercase names with underscores for programmer names and programmer files. With this, you can run "grep -i ft2232_spi" and find everything related to the ft2232_spi driver. Same applies to all other programmers. Corresponding to flashrom svn r1023. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Every SPI programmer driver had its own completely different chip write ↵Carl-Daniel Hailfinger2010-05-211-23/+2
| | | | | | | | | | | | | | | implementation, and all of them were insufficiently commented Create spi_write_chunked as a copy of spi_read_chunked and convert all SPI programmers to use it. No functional changes except: - Bus Pirate uses 12 Byte writes instead of 8 Byte writes - SB600 uses 5 Byte writes instead of 1 Byte writes Corresponding to flashrom svn r1005. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: David Hendricks <dhendrix@google.com>
* Multibyte SPI write for the Bus PirateCarl-Daniel Hailfinger2010-03-221-1/+36
| | | | | | | Corresponding to flashrom svn r964. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-0/+1
| | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Convert all messages in buspirate_spi.c to the new message infrastructureSean Nelson2010-01-091-40/+29
| | | | | | | Corresponding to flashrom svn r851. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Programmer debug messages during programmer init/shutdown are useful because ↵Carl-Daniel Hailfinger2010-01-071-6/+17
| | | | | | | | | | | | | | | | | | | | | | | they print hardware settings and desired configuration They help in getting a quick overview of hardware and software state on startup and shutdown. Programmer debug messages during flash chip access are mostly a distraction in logs and should only be enabled if someone is having problems which are suspected to stem from a programmer hardware or programmer software bug. Disable those messages by default, they can be reenabled by #define COMM_DEBUG in the affected programmer file. An added benefit is a tremendous size reduction in verbose probe/read/write/erase logs because only flash chip driver messages remain. In some cases, logs will shrink from 65 MB to 10 kB or less. The right(tm) fix would be two different debug levels (DEBUG and SPEW) and the ability to differentiate between programmer debug messages and flash chip debug messages. Until the design for the message printing infrastructure is finished, this is the best stop-gap measure we can get. Corresponding to flashrom svn r834. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audioahcked@gmail.com>
* Multiple unrelated changesPatrick Georgi2010-01-061-4/+2
| | | | | | | | | | | | | | | - replace the hand written serial input flush routine with the termios one. - serialport_discard_read isn't necessary anymore - it just wrapped sp_flush_incoming with no extra value. - serialport_read and serialport_write would misbehave if read or write didn't process everything in one go. - sp_flush_incoming should be #define'd out for FAKE_COMMUNICATION like serialport_discard_read was Corresponding to flashrom svn r831. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move OS-dependent serial code from buspirate_spi.c to serial.c and rename a ↵Carl-Daniel Hailfinger2010-01-061-56/+4
| | | | | | | | | | | few functions to make it obvious that they are generic and not Specific to the Bus Pirate. Corresponding to flashrom svn r830. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* Add the ability to set Bus Pirate SPI speed via the command lineCarl-Daniel Hailfinger2009-11-241-20/+34
| | | | | | | | | | | | | | | | | | | | | | | Example usage: flashrom -p buspiratespi:spispeed=2.6MHz,dev=/dev/foo flashrom -p buspiratespi:dev=/dev/foo,spispeed=2.6M Refactor programmer option parsing (this allows cleanups in other programmers as well). Increase SPI read size from 8 to 12 bytes (current single-transaction limit of the Bus Pirate raw SPI protocol). Add Bus Pirate to the list of programmers supporting 4 byte RDID. Add Bus Pirate syntax to the man page. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r776. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Add Bus Pirate SPI supportCarl-Daniel Hailfinger2009-11-241-0/+358
The code should work on Linux/*BSD/MacOSX and relies on the serial code implementation in serial.c. Support for additional platforms (Windows) will have to be added to serial.c for this to work. For tests without a Bus Pirate (or with non-functional serial code) it is possible to #define FAKE_COMMUNICATION in buspirate_spi.c. Thanks to Sean Nelson for the SPI mode settings code. I tweaked it a bit to make configuration from a commandline easier should anybody want that feature. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r772. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
OpenPOWER on IntegriCloud