summaryrefslogtreecommitdiffstats
path: root/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* Add support for RayeR SPIPGM hardware as described in ↵Carl-Daniel Hailfinger2010-07-211-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://rayer.ic.cz/elektro/spipgm.htm To use the RayeR driver, run flashrom -p rayer_spi -V Known bugs/limitations: - Won't compile/work on non-x86 architectures. - Will always use direct port I/O access. Log follows: flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 4.3.2, little endian Calibrating delay loop... OK. Initializing rayer_bitbang_spi programmer Using port 0x378 as I/O base for parallel port access. ... Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2015 ... Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 0xffe00000. ... No operations were specified. Corresponding to flashrom svn r1093. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Martin Rehak <rayer@seznam.cz> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Add OpenBSD supportCarl-Daniel Hailfinger2010-07-021-0/+8
| | | | | | | | | | | | | | Add a requirements section to the man page which lists the needed access permissions for each programmer. This feature needs my pciutils/libpci 8/16-bit write emulation patch at http://marc.info/?l=openbsd-ports&m=127780030728045 titled [PATCH] Fix pciutils non-32bit PCI write on OpenBSD Corresponding to flashrom svn r1067. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stuart Henderson <sthen@openbsd.org>
* Work around shadowing warnings in libpci headersCarl-Daniel Hailfinger2010-06-251-1/+3
| | | | | | | | | | This is needed for warning-free compilation on older gcc versions (3.x and probably older). Such a gcc version is the default on i386 OpenBSD. Corresponding to flashrom svn r1061. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stuart Henderson <sthen@openbsd.org>
* Detect incompatible CONFIG_FOO=yes for the specified target and refuse to ↵Carl-Daniel Hailfinger2010-06-141-5/+35
| | | | | | | | | | | | | compile with a meaningful error message Set the default for incompatible CONFIG_FOO to no. Just running "make" should result in a a build which compiles the common subset of available and working features. Corresponding to flashrom svn r1048. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer+lists.flashrom@gmail.com>
* Handle OS where executables have a hardcoded suffixCarl-Daniel Hailfinger2010-06-141-19/+21
| | | | | | | | | | | E.g. DOS with .exe This ensures that any temp files in the configure/check step of the Makefile are removed correctly. Corresponding to flashrom svn r1047. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer+flashrom@gmail.com>
* We already have NEED_PCI in the Makefile to link in PCI supportCarl-Daniel Hailfinger2010-06-141-12/+12
| | | | | | | | | | | Add NEED_SERIAL and NEED_NET to decouple individual drivers from compilation and linking decisions. Move libgetopt from a DOS+PCI dependency to a DOS dependency to fix linking on DOS if no driver requiring PCI is enabled. Corresponding to flashrom svn r1044. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* National Semiconductor DP83815/DP83816 and DP83820 NIC programmer supportAndrew Morgan2010-06-071-0/+9
| | | | | | | | | | Some instability remains, but that may be due to hardware problems in the specific card (Netgear FA311) used for testing. Corresponding to flashrom svn r1039. Signed-off-by: Andrew Morgan <ziltro@ziltro.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Create dependencies on the fly rather than in a separate stepStefan Reinauer2010-06-071-9/+6
| | | | | | | Corresponding to flashrom svn r1034. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* NetBSD needs libpciutils (which is called libpci on pretty much every other ↵Carl-Daniel Hailfinger2010-06-041-2/+4
| | | | | | | | | | | | platform and lives in the pciutils package) and apparently the Libpciutils on NetBSD needs the NetBSD-native libpci (no equivalent on other platforms). Thanks to Jonathan A. Kollasch for reporting. Corresponding to flashrom svn r1033. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
* The internal programmer needs correct information about flash_base and chip ↵Carl-Daniel Hailfinger2010-06-041-1/+1
| | | | | | | | | | | | | window top/bottom alignment on non-x86 before it can be used Abort any internal programmer action for now until the code is fixed. Add the concept of a processor enable for systems where flashing is impacted by processor settings or processor model. Corresponding to flashrom svn r1031. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Make the 'flashrom --help' output look a bit nicerUwe Hermann2010-06-041-1/+1
| | | | | | | | | | | | | | | | | | Only print "flashrom" as the program name unconditionally, not the full path and program name (e.g. "/home/foo/bar/baz/flashrom" or on Windows "C:\Foo\Bar\Whatever\flashrom.exe"). The path or exact executable name is not really useful to print here, if you managed to run --help you already know it, and it just makes the output look ugly. Also, add a missing newline to make the output look nicer. Finally, revert the "CONFIG_PRINT_WIKI ?= yes" change which accidentally slipped into r1029. Corresponding to flashrom svn r1030. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix URLs for GIGABYTE motherboardsPeter Lemenkov2010-06-041-1/+1
| | | | | | | Corresponding to flashrom svn r1029. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* So far, we have up to 4 different names for the same thing (ignoring ↵Carl-Daniel Hailfinger2010-05-311-21/+21
| | | | | | | | | | | | | | | | | capitalization) CONFIG_FT2232SPI (makefile config option) FT2232_SPI_SUPPORT (#define) ft2232spi (programmer name) ft2232_spi.c (programmer file) Use CONFIG_* with underscores for makefile config options and #defines and kill the useless _SUPPORT idiom. Use lowercase names with underscores for programmer names and programmer files. With this, you can run "grep -i ft2232_spi" and find everything related to the ft2232_spi driver. Same applies to all other programmers. Corresponding to flashrom svn r1023. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add flashrom.exe unconditionally to the list of files removed at make cleanCarl-Daniel Hailfinger2010-05-301-1/+3
| | | | | | | | | | This allows users to run make clean without specifying the target architecture. Corresponding to flashrom svn r1022. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Handle the following architectures in generic flashrom codeCarl-Daniel Hailfinger2010-05-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - x86/x86_64 (little endian) - PowerPC (big endian) - MIPS (big+little endian) No changes to programmer specific code. This means any drivers with MMIO access will _not_ suddenly start working on big endian systems, but with this patch everything is in place to fix them. Compilation should work on all architectures listed above for all drivers except nic3com and nicrealtek which require PCI Port IO which is x86-only for now. To compile without nic3com and nicrealtek, run make distclean make CONFIG_NIC3COM=no CONFIG_NICREALTEK=no Thanks to Misha Manulis for testing early versions of this patch on PowerPC (big endian) with the satasii programmer. Thanks to Segher Boessenkool for design review and for helping out with compiler tricks and pointing out that we need eieio on PowerPC. Thanks to Vladimir Serbinenko for compile testing on MIPS (little endian) and PowerPC (big endian) and for runtime testing on MIPS (little endian). Thanks to David Daney for compile testing on MIPS (big endian). Thanks to Uwe Hermann for compile and runtime testing on x86_64. DO NOT RUN FLASHROM ON NON-X86 AFTER APPLYING THIS PATCH! This patch only provides the infrastructure, but does not convert any drivers, so flashrom will compile, but it won't do the right thing on non-x86 platforms. Binary file (standard input) matches Corresponding to flashrom svn r1013. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Misha Manulis <misha@manulis.com>
* Support for Realtek RTL8139 network card flashingJoerg Fischer2010-05-211-0/+9
| | | | | | | Corresponding to flashrom svn r1002. Signed-off-by: Joerg Fischer <turboj@gmx.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Increase flashrom release number to 0.9.20.9.2Carl-Daniel Hailfinger2010-05-191-1/+1
| | | | | | | | | | Corresponding to flashrom svn r1000. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix assorted documentation, frontend and printing bugsCarl-Daniel Hailfinger2010-05-151-1/+1
| | | | | | | | | | Change the command line interface to make file names positional. Add more sanity checks to the command line parser. Corresponding to flashrom svn r998. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Fix the DOS portRudolf Marek2010-04-251-4/+0
| | | | | | | | | | | Now the DS selector limit is set to 4GB and all mmio accesses goes through DS, the 1:1 mapping is fixed so the _DS base is taken onto account. Plus is that the hwaccess.c needs no change and memcpy etc can be used on mmaped space. Corresponding to flashrom svn r995. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add runtime and build environment info to the flashrom version messageCarl-Daniel Hailfinger2010-03-271-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses code from Idwer Vollering and Maciej Pijanka. I've added Makefile support and compiler version printing and restructured the code heavily. The code prints runtime system information and buildtime libpci information (I couldn't find any runtime libpci version function). Due to our ability to cross-compile flashrom, buildtime system information from "uname -mrs" doesn't help diagnosing any problems. That's why only libpci and gcc are buildtime info, and the rest is runtime info. Examples: openSUSE 10.3, i686, gcc 4.2.1, with PCI support: flashrom v0.9.1-r971 on Linux 2.6.22.19-0.2-default (i686), built with libpci 2.2.6, GCC 4.2.1 (SUSE Linux) openSUSE 10.3, i686, llvm-clang-2.6.99svn97231, with PCI support: flashrom v0.9.1-r971 on Linux 2.6.22.19-0.2-default (i686), built with libpci 2.2.6, LLVM 1/clang 1 openSUSE 11.1, x86_64, gcc 4.3.2, with PCI support: flashrom v0.9.1-r972 on Linux 2.6.27.29-0.1-default (x86_64), built with libpci 3.0.1, GCC 4.3.2 [gcc-4_3-branch revision 141291] openSUSE 10.3, i686, gcc 4.2.1, without PCI support: flashrom v0.9.1-r971 on Linux 2.6.22.19-0.2-default (i686), built with GCC 4.2.1 (SUSE Linux) Windows/cygwin, i686, gcc 4.3.4, without PCI support: flashrom v0.9.1-r973 on CYGWIN_NT-5.1 1.7.1(0.218/5/3) (i686), built with GCC 4.3.4 20090804 (release) 1 FreeBSD 8.0, i386, gcc 4.2.1, with PCI support: flashrom v0.9.1-r973 on FreeBSD 8.0-RELEASE-p2 (i386), built with libpci 3.1.7, GCC 4.2.1 20070719 [FreeBSD] Corresponding to flashrom svn r987. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Acked-by: Maciej Pijanka <maciej.pijanka@gmail.com>
* Idwer Vollering reported problems with the current libpci check on FreeBSD ↵Carl-Daniel Hailfinger2010-03-221-15/+6
| | | | | | | | | | | | | | | 8.0-RELEASE i386 This is caused by a strict linker. Parsing linker error messages is an exercise in futility, and library detection with $CC--print-file-name is totally useless for libraries outside the standard hardcoded builtin gcc search path (probably the same for other compilers as well). Look for libpciutils instead of libpci on NetBSD during the check. Corresponding to flashrom svn r968. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Add DOS cross-compilation support to the MakefileCarl-Daniel Hailfinger2010-03-211-6/+37
| | | | | | | | | Add a README with build instructions. Corresponding to flashrom svn r963. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Rudolf Marek <r.marek@assembler.cz>
* Rename print_82802ab_status to print_status_82802ab add unlock_82802abSean Nelson2010-03-191-1/+1
| | | | | | | | | | | | | | | Strip unlock code from erase_block_82802ab rename erase_82802ab_block to erase_block_80280ab delete sharplhf00l04.o from Makefile delete *_lhf00l04* from chipdrivers.h add unlock_stm50flw0x0x delete wait_stm50flw0x0x delete write_page_stm50flw0x0x convert erase_stm50flw0x0x to erase_chip_stm50flw0x0x delete write_stm50flw0x0x add unlock_82802ab to two Intel chips with TEST_BAD_WRITE change the status of 82802AB, 82802AC, M50FW040, M50FW080 to TEST_OK_PR Corresponding to flashrom svn r948. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Split spi.c into programmer and chip code Remove chipdriver.h include from ↵Sean Nelson2010-02-261-1/+1
| | | | | | | | | | | | | flash.h Some of the spi programmer drivers required chipdrivers.h, needs fixing later: it87spi.c ichspi.c sb600spi.c wbsio_spi.c buspirate_spi.c ft2232spi.c bitbang_spi.c dediprog.c Corresponding to flashrom svn r914. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add initial (non-working) code for Highpoint ATA/RAID controllersUwe Hermann2010-02-211-0/+10
| | | | | | | | | | It's disabled by default. The current status is detailed at: http://www.flashrom.org/pipermail/flashrom/2010-January/001828.html Corresponding to flashrom svn r908. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Here's a very quick patch to fix the missing unlock codeSean Nelson2010-02-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Fixes missing unlock for certain chips: * unlock_49lf00x * Pm49fl002 * Pm49fl004 * unlock_49flxxxc * SST49LF160C * unlock_winbond_fwhub * W39V080FA * W39V080FA (dual mode) Fixes missing printlock for certain chip: * printlock_w39v040c * W39V040C Corresponding to flashrom svn r907. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de>
* Use uname -p instead of -m on NetBSD so we get the right architecture ↵Jonathan A. Kollasch2010-02-141-1/+1
| | | | | | | | | library name Corresponding to flashrom svn r903. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Linking in support for the internal programmer doesn't make sense if you ↵Carl-Daniel Hailfinger2010-02-121-7/+2
| | | | | | | | | | | | | only need hardware (ioport, memory) access Split internal.c into internal.c and hwaccess.c. Note: This patch was created by "svn cp internal.c hwaccess.c" and then removing stuff from both files. That's why you can't apply the patch as-is before running the svn cp. Corresponding to flashrom svn r898. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Complete the addition of Feature Bits for all Jedec based chipsSean Nelson2010-01-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add FEATURE_SHORT_RESET, FEATURE_LONG_RESET, and FEATURE_EITHER_RESET rewrite jedec functions to use getaddrmask convert write_49f002 to write_jedec_1 convert write_w39v040c to write_jedec_1 convert probe_w39v040c to probe_jedec convert write_49lf040 to write_jedec_1 convert write_pm29f002 to write_jedec convert write_29f040b to write_jedec_1 convert probe_29f040b to probe_jedec convert erase_chip_29f040b to erase_chip_block_jedec convert erase_sector_29f040b to erase_sector_jedec convert write_m29f002b to write_jedec convert write_m29f002t to write_jedec convert *_29f002 to *_jedec decouple unused files from Makefile: am29f040b.c en29f002a.c m29f002.c mx29f002.c pm29f002.c sst49lf040.c w39v040c.c w49f002u.c Corresponding to flashrom svn r886. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Anders Juel Jensen <andersjjensen@gmail.com>
* Backout unintentional chunkStefan Reinauer2010-01-221-1/+1
| | | | | | | Corresponding to flashrom svn r880. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* This patch fixes the use of CFLAGS and CPPFLAGS in the flashrom makefileStefan Reinauer2010-01-211-8/+8
| | | | | | | Corresponding to flashrom svn r878. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Matching board via DMIMichael Karcher2010-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a board is not uniquely identifiable by PCI device/subsystem IDs, a string can be specified to be looked for (case-sensitive, substring or anchored) for now in one of the following DMI items in addition to matching the PCI IDs: - System Manufacturer - System Product Name - System Version - Baseboard Manufacturer - Baseboard Product Name - Baseboard Version Strings are anchored re-like (^ at the beginning, $ at the end), but there are no plans to support full regular expressions and matched to any of the mentioned fields. The match is only made if DMI info is available and the string matches. If no DMI info is available and the PCI IDs match, a warning is printed as the board can not be autodetected. It's still open to discussion whether we add an DMI override switch to specify a string that will definitely match, and whether this switch is only used if no DMI is available or whether it overrides or augments DMI data. DMI data is currently read using dmidecode. This tool is available for all major platforms except MacOS X. I heard that there also is a MacOS X version of dmidecode, but didn't investigate that. Corresponding to flashrom svn r874. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Dediprog SF100 supportCarl-Daniel Hailfinger2010-01-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | Reverse engineered from USB logs. I never touched that programmer nor did I ever see the associated software. Disabled by default until it is complete. The driver needs to be hooked up to the SPI core before it will do anything besides init and diagnostics. I successfully reverse engineered all commands, but some are still somewhat magic. Logs from "flashrom -p dediprog -V" are appreciated. Probe and read should work, erase/write is expected to explode. The programmer will set voltage to 0 on exit. Thanks a lot to Stefan Reinauer and Patrick Georgi for providing USB logs and for testing the result. Corresponding to flashrom svn r870. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Enable -Wshadow, clean code for thatMichael Karcher2010-01-121-1/+1
| | | | | | | | | | | | | | This is not just for fun. We hit a real bug on BSD with the outl macros. The macro variable tmp collided with the tmp from outer scope. second revision, now also taking care of inb/inw/inl. While that shadowing did not introduce bugs (yet), of course it breaks the build on BSD when -Wshadow is enabled. Corresponding to flashrom svn r860. Signed-off-by: Michael Karcher <flashrom@mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv@skynet.be>
* Fix Makefile dependencies if FT2232SPI is not selectedCarl-Daniel Hailfinger2010-01-091-2/+3
| | | | | | | | | | .features was always regenerated in that case, triggering whole-project recompiles even if nothing changed. Corresponding to flashrom svn r844. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Add support for NetBSDJonathan A. Kollasch2010-01-081-0/+4
| | | | | | | Corresponding to flashrom svn r838. Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Converting fprintf(stderr), printf, and printf_debug into a common print ↵Sean Nelson2010-01-071-1/+1
| | | | | | | | | | | | | interface for flashrom It also changes so -VV will spit out highly verbose messages for debugging. This is a minimal patch to lessen impact a later patch will convert current printf messages to the new interface. Corresponding to flashrom svn r835. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Move the CLI related functions main() and cli_usage() to cli_classic.cCarl-Daniel Hailfinger2010-01-071-1/+1
| | | | | | | | | | | | | | | | | | And rename them accordingly. For now, main() just calls cli_classic(), but alternative frontends can be switched in main(). Annotate remaining help texts with CLI dependency inside flashrom.c with a FIXME comment. Now people can go and create different frontends and be happy. Please note that any other frontend will have to sort of duplicate the probing code in cli_classic.c. Refactoring that part of the code is possible, but not easy because we still want to print instructive help messages for users. Corresponding to flashrom svn r833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Some programmers (most notably FT2232SPI) use fallback_* and noop_*, but ↵Carl-Daniel Hailfinger2010-01-061-1/+1
| | | | | | | | | | | | those functions lived inside internal.c and were unavailable if no PCI-based programmers were compiled in. Move those functions to the new file programmer.c. Thanks to Patrick Georgi for finding this. Corresponding to flashrom svn r829. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
* This patch shouldn't affect anything else in patchworkSean Nelson2009-12-241-17/+29
| | | | | | | | | | | It just splits $(OBJS) in Makefile into separate lists for Programmer, Chip, and CLI related files/objects. This should help later on figuring out where files may go for a libflashrom library. Corresponding to flashrom svn r824. Signed-off-by: Sean Nelson <audiohacked@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Only check for requested features in the MakefileCarl-Daniel Hailfinger2009-12-241-5/+14
| | | | | | | | | | | | | | | | Libpci is no longer required to build flashrom and will not be checked for if no PCI code is needed for the selected programmers. libftdi is no longer checked for if FT2232 support is not selected. With this patch, it is possible to build on pretty much every OS out there (including Windows) without altering the Makefile. Some gcc versions may need a CFLAGS override for a warning in dummyflasher.c, though. Corresponding to flashrom svn r823. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Internal.c was always compiled in because it hosted the function ↵Carl-Daniel Hailfinger2009-12-241-2/+2
| | | | | | | | | | | | | internal_delay() Move that function to udelay.c and compile internal.c only if really needed. physmap.c is only needed if the programmer is internal or a PCI card. Make its compilation conditional. Corresponding to flashrom svn r822. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Idwer Vollering <vidwer@gmail.com>
* Internal (onboard) programming was the only feature which could not be disabledCarl-Daniel Hailfinger2009-12-131-7/+23
| | | | | | | | | | | | | | | | | | | | Make various pieces of code conditional on support for internal programming. Code shared between PCI device programmers and onboard programming is now conditional as well. It is now possible to build only with dummy support: make CONFIG_INTERNAL=no CONFIG_NIC3COM=no CONFIG_SATASII=no CONFIG_DRKAISER=no CONFIG_SERPROG=no CONFIG_FT2232SPI=no This allows building for a specific use case only, and it also facilitates porting to a new architecture because it is possible to focus on highlevel code only. Note: Either internal or dummy programmer needs to be compiled in due to the current behaviour of always picking a default programmer if -p is not specified. Picking an arbitrary external programmer as default wouldn't make sense. Build and runtime tested in all 1024 possible build combinations. The only failures are by design as mentioned above. Corresponding to flashrom svn r797. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Revert debug compilation which was committed in r772 by accidentCarl-Daniel Hailfinger2009-11-241-1/+1
| | | | | | | Corresponding to flashrom svn r773. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add Bus Pirate SPI supportCarl-Daniel Hailfinger2009-11-241-1/+14
| | | | | | | | | | | | | | | | | | | The code should work on Linux/*BSD/MacOSX and relies on the serial code implementation in serial.c. Support for additional platforms (Windows) will have to be added to serial.c for this to work. For tests without a Bus Pirate (or with non-functional serial code) it is possible to #define FAKE_COMMUNICATION in buspirate_spi.c. Thanks to Sean Nelson for the SPI mode settings code. I tweaked it a bit to make configuration from a commandline easier should anybody want that feature. Tested-by: Sean Nelson <audiohacked@gmail.com> Corresponding to flashrom svn r772. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Sean Nelson <audiohacked@gmail.com>
* Move serial handling from serprog.c to serial.cCarl-Daniel Hailfinger2009-11-231-0/+4
| | | | | | | | | | | | | This is the first step in enabling platform independent serprog and it also allows other drivers to use serial port functionality without requiring serprog. Pure code move, no code changed. Corresponding to flashrom svn r771. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix incorrect comment about wiki printing in MakefileCarl-Daniel Hailfinger2009-11-161-1/+1
| | | | | | | | | Spotted by Benjamin BELLEC <b.bellec@gmail.com> Corresponding to flashrom svn r765. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Retrieve the proper linker flags for libftdi via pkg-config and fall back if ↵Carl-Daniel Hailfinger2009-11-161-3/+4
| | | | | | | | | pkg-config isn't available or if it doesn't know libftdi Fix $LIBS and $FEATURE_LIBS to honor dependency order. Binary file (standard input) matches Corresponding to flashrom svn r762.
* There is no need to tell people to install libz if flashrom doesn't need libzCarl-Daniel Hailfinger2009-10-031-9/+31
| | | | | | | | | | | | So far, the only case where libz is needed is when a library (libpci) pulls in libz and even then it only happens if libpci is available in a static version only and said static version has libz requirements. Check for libpci separately and don't require libz if it isn't needed. Clarify the README. Corresponding to flashrom svn r743. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Disable NVIDIA flashing support for now, erase/write is not properly ↵Uwe Hermann2009-10-011-2/+2
| | | | | | | | | | | | working, yet This needs more testing and investigation (partly timing related, it seems). Reads did work in multiple cases, though. Corresponding to flashrom svn r740. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
OpenPOWER on IntegriCloud