summaryrefslogtreecommitdiffstats
path: root/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* Increase flashrom version number to 0.9.90.9.9stagingstableStefan Tauner2016-03-131-1/+1
| | | | | | | | | Corresponding to flashrom svn r1954. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add a bunch of new/tested stuff and various small changes 25Stefan Tauner2016-03-131-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - ASRock Fatal1ty 970 Performance and P4i65G Reported by anonymous email message ID: 932677687262b1300eaf14260999d9262c31@guerrillamail.com The latter actually had a tested board enable already. Flash chips: - Eon EN25Q128 to PREW (+PREW) Reported by Adrian Graham - GigaDevice GD25VQ41B to PREW (+PREW) Reported by David Hendricks - Winbond W39V040FB to PREW (+EW) Reported by fjed on IRC Miscellaneous: - Change PCI IDs of "MS-6577 (Xenon)" board enable. The previous IDs contained the on-board display adapter which is disabled when a dedicated graphics card is installed. - Add a note to the README how to overcome the clang warning if only a single programmer is enabled. - Fix some typo and manpage problems found by lintian - r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that. - Make MS-7094 (K8T Neo2-F V2.0) board enable less contestable. Previous PCI IDs were board-specific but ot the other of devices that could be disabled by the firmware or that vary among hardware revions. There are no good alternatives available. However, since we always have a DMI decoder available now, we can use non-board-specific devices without taking risks. Thanks to Uwe Hermann for reporting and testing. - Some other small changes to clean up whitespace and fix some warnings from Debian's lintian. Corresponding to flashrom svn r1951. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix compilation on SunOSStefan Tauner2016-03-131-1/+1
| | | | | | | | | | | | | | This came up when I was testing if building on SunOS still works on the buildbot's instance of OmniOS r151014 which is based on illumos. The fix is - to link against libnsl - a small C type fix in ich_descriptor_tool Corresponding to flashrom svn r1950. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Makefile: Fix driver blacklist dependenciesCarl-Daniel Hailfinger2016-02-281-10/+3
| | | | | | | | | | | Allow mstarddc_spi and pony_spi on Android. Allow mstarddc_spi and pony_spi on architectures with unsupported raw access. Corresponding to flashrom svn r1946. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* makefile: allow to disable all default-yes config variables with ↵Stefan Tauner2016-02-261-0/+10
| | | | | | | | | | | CONFIG_NOTHING=yes All credit for this should be given to Patrick Georgi (see r1869). Corresponding to flashrom svn r1944. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Partial architecture support for alpha hppa m68k sh s390Carl-Daniel Hailfinger2016-02-251-0/+101
| | | | | | | | | Only hardware not needing raw access (PCI, memory, port I/O) is supported. Corresponding to flashrom svn r1943. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Increase version number to 0.9.9-rc10.9.9-rc1Stefan Tauner2016-02-211-1/+1
| | | | | | | | | Corresponding to flashrom svn r1939. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Automatically disable atapromise for libpayload as wellStefan Tauner2016-02-211-0/+6
| | | | | | | | | | | The atapromise module uses the rom_size field of the struct pci_dev found in pci.h that does not exist in libpayload's implementation and thus does not compile with libpayload. Corresponding to flashrom svn r1938. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow global disable of all drivers requiring libusb* or libpciCarl-Daniel Hailfinger2016-02-201-6/+39
| | | | | | | | | | | | | | This is especially helpful for compile tests with CONFIG_EVERYTHING=yes, but can also be used without CONFIG_EVERYTHING. Usage: make CONFIG_ENABLE_LIBUSB0_PROGRAMMERS=no CONFIG_ENABLE_LIBUSB1_PROGRAMMERS=no CONFIG_ENABLE_LIBPCI_PROGRAMMERS=no Corresponding to flashrom svn r1936. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Automatically disable atapromise on non-x86Carl-Daniel Hailfinger2016-02-201-0/+5
| | | | | | | | | | We do not support PCI port I/O on non-x86 (yet). Atapromise needs PCI port I/O. Corresponding to flashrom svn r1935. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Do not require PCI code for RayeR SPI driverCarl-Daniel Hailfinger2016-02-201-6/+27
| | | | | | | | | | | | CONFIG_RAYER_SPI only needs raw hardware access, but not libpci. Disable CONFIG_RAYER_SPI on Android because of missing inb/outb. Introduce NEED_RAW_ACCESS for raw memory access, PCI port I/O and MSR access. Corresponding to flashrom svn r1934. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Makefile: fix overriding of make command line argumentsStefan Tauner2016-02-191-18/+18
| | | | | | | | | | | | | | | | | | Command line arguments given when executing make should not stop us from setting commonly user-configurable variables like CPPFLAGS or LDFLAGS. Without this patch 'make CPPFLAGS="-Ifail"' would fail to find libusb1 headers and abort. Add override statements where we append mandatory options to these variables to make (Debian) packagers more happy. Also, r1920 introduced some explicit calls to pkg-config instead of $(PKG_CONFIG). This patch corrects that as well. Corresponding to flashrom svn r1931. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dediprog: port to libusb1 and use asynchronous bulk transfers for readingNico Huber2016-02-181-1/+1
| | | | | | | | | | | | | This patch is based on Nico Huber's original version that was rebased by David Hendricks for Chromium OS in Change-Id: I84384b9d8ed53911657cf2293733531a6e11fd23 Corresponding to flashrom svn r1929. Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* List affected features for missing librariesCarl-Daniel Hailfinger2016-02-171-39/+44
| | | | | | | | | | | | | | | | | | If libpci, libusb0 or libusb1 are missing, make will now tell you which currently enabled features require those libraries. Example output: Checking for libusb-0.1/libusb-compat headers... not found. The following features require libusb-0.1/libusb-compat: CONFIG_PICKIT2_SPI CONFIG_DEDIPROG. Please install libusb-0.1 headers or libusb-compat headers. See README for more information. Corresponding to flashrom svn r1926. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add support for WCH CH341A as an SPI programmerUrja Rannikko2016-01-311-2/+21
| | | | | | | | Corresponding to flashrom svn r1921. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Add infrastructure to support libusb-1.0Stefan Tauner2016-01-311-1/+50
| | | | | | | Corresponding to flashrom svn r1920. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Makefile: print compile commands of configure steps to the build details fileStefan Tauner2016-01-241-1/+13
| | | | | | | | | | This allows for even more easy debugging of build failures due to problems with libraries. Corresponding to flashrom svn r1919. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* dediprog: support new communication protocol, cleanup and enable by defaultSimon Glass2016-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The new protocol changes some commands, so adjust the code to support these. Use helper functions to reduce duplication in libusb calls. Testing with real hardware showed that the maximum read size via the control endpoint is about 16 bytes although specification does not mention that. Dediprog SF600 is not supported yet. Based on the following chromiumos changes: Change-Id: Ibd1e27d9e8273ba879b9b5d95675b99596255c89 Change-Id: Ifc33e7b1eed5b0cb80f83458fa24741a577fa46a Additionally, some ideas from Alex for cleaner code were incorporated as well. Tested on an SF100 V4 with both firmware generations PREWing a M25PX80 and AT45DB041D (the latter is using dediprog_spi_send_command() instead of optimized functions which make it a good test vehicle). Corresponding to flashrom svn r1918. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 24Stefan Tauner2016-01-231-4/+4
| | | | | | | | | Tested mainboards: OK: - ASRock G31M-GS Binary file (standard input) matches Corresponding to flashrom svn r1917.
* Add atapromise programmerJoseph C. Lehner2016-01-161-0/+14
| | | | | | | | | | | | | | | | | | Supported controllers are Promise PDC20262 (FastTrak66/Ultra66), PDC20265 (FastTrak100 Lite/Ultra100), PDC20267 (FastTrak100/Ultra100). At least the Ultra100 only has address lines A0-A14 wired up, limiting addressable chip size to 32 kB. The flash chips mounted on those controllers usually is 128 kB, i.e. parts of the flash chip are inaccessible. As a workaround, the driver implicitly truncates the size of all flash chips to 32 kB. Works well for the factory installed flash. Do NOT use as a generic programmer for chips >32 kB. Corresponding to flashrom svn r1916. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Urja Rannikko <urjaman@gmail.com>
* Set LC_ALL globally in MakefileStefan Tauner2016-01-141-1/+11
| | | | | | | | | | | This won't work for the majority of relevant commands because they use the $(shell) function and GNU make does not relay variables exported within the makefile to their evironment. Corresponding to flashrom svn r1914. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Pimp the manpage to create nicer hyperlinks and HTML outputStefan Tauner2016-01-141-2/+6
| | | | | | | | | | Also, add a target to the makefile to build a flashrom.8.html with groff. To fix some formatting issues this adds some indention commands as well. Corresponding to flashrom svn r1913. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for linking statically with CONFIG_STATIC=yesStefan Tauner2016-01-071-0/+5
| | | | | | | | | | | | | | This is loosly based on the following changes of chromiumos: - flashrom: Add default pkg-config definition. Change-Id: I28744af0fd2d2d0bcc4569a5fbef370321691267 - Fix FT2232 feature on static builds. Change-Id: I70d4a7bda573b64cb18429a21792455b018c4cba Corresponding to flashrom svn r1912. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Make make errors more less flashilyStefan Tauner2016-01-071-60/+68
| | | | | | | | | | | | | | | | | | Previously we have hid almost all error messages from called tools like pkg-config or the compiler in the "configure" step. Only exceptions were the library checks because Carl-Daniel felt it improved usability in case of missing headers etc. However, this makes the output of the makefile less readable and in the case of pkg-config fallbacks the error messages are actually expected. Instead of throwing a part of the detailed stderr outputs of the tools into the face of the users and completely hiding others, write all of them into a separate log file instead. Corresponding to flashrom svn r1911. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* makefile: fix exports of PKG_CONFIG_LIBDIR for pkg-config callsStefan Tauner2016-01-071-3/+3
| | | | | | | | | The parenthesis pushed the exports into a subshell thus made them useless. Corresponding to flashrom svn r1910. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for libftdi1Alexandru Gagniuc2015-12-251-4/+6
| | | | | | | | | | | | | | Many distros no longer provide libftdi 0.2, and as a result, programmers that depend on libftdi must be disabled to compile flashrom. Luckily the libftdi API did not change significantly, so for our purposes, we can simply use the newer headers and link to the newer library if it is available. Corresponding to flashrom svn r1904. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Increase flashrom version number to 0.9.80.9.8Stefan Tauner2015-03-011-1/+1
| | | | | | | Corresponding to flashrom svn r1887. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 23Stefan Tauner2015-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - Elitegroup GF7050VT-M Reported by Alex - Fujitsu D2724-A1x (used in ESPRIMO E5625) Reported by Rainer Spillmann - Teclast X98 Air 3G Reported by Antonio Ospite Flash chips: - Fix MX25L6405(D) definition by splitting it. Reported by Reggie McMurtrey - Add Macronix MX25L..08E family and rearrange MX25L6436E. - Pm49FL004 to PREW (+EW) Reported by Georg Sauthoff Miscellaneous: - Add board enable for abit KN9 Ultra. - Mark ARM-USB-OCD as working OK. - Use "mobile devices" instead of "laptops" in output. - Tiny other stuff. Corresponding to flashrom svn r1886. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Increase flashrom version number to 0.9.8-rc10.9.8-rc1Stefan Tauner2015-02-111-1/+1
| | | | | | | | Corresponding to flashrom svn r1883. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for SPARC (maybe)Stefan Tauner2015-02-101-1/+1
| | | | | | | | | Was implemented by SPARC newbies, does (cross-)compile but is not run-tested. Corresponding to flashrom svn r1882. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the Microchip PICkit2 as an SPI programmerJustin Chevrier2015-02-081-2/+21
| | | | | | | | | | | | | | | This patch was inspired by the code in AVRDude (open source Atmel AVR programmer) to support the PICkit2 written by Doug Brown [1]. The Dediprog code in flashrom was used as the template for this code with some reference to the ft2232 code as well. [1] - https://github.com/steve-m/avrdude/blob/master/pickit2.c Corresponding to flashrom svn r1881. Signed-off-by: Justin Chevrier <jchevrier@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine version check of libpci function pci_get_devStefan Tauner2015-02-081-0/+28
| | | | | | | | | | | | | The way more elegant check for the header fails unfortunately on CentOS 4.9 because PCI_LIB_VERSION is not defined at all although the domain parameter is present. This patch jumps through the hoops via an additional check in the Makefile to determine if the function accepts 5 parameters (new version) or not (old version). Corresponding to flashrom svn r1880. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add a bunch of new/tested stuff and various small changes 22Stefan Tauner2015-02-081-2/+3
| | | | | | | | | | | | | | | | | | | | | Tested mainboards: OK: - AOpen UK79G-1394 (used in EZ18 barebones) Reported by Lawrence Gough - ASUS M4N78 SE Reported by Dima Veselov - ASUS P5LD2-VM Mark board enable as tested (reported by Dima Veselov) - GIGABYTE GA-970A-UD3P (rev. 2.0) Reported by trucmar on IRC - GIGABYTE GA-990FXA-UD3 (rev. 4.0) Reported by ROKO__ on IRC - GIGABYTE GA-H77-DS3H (rev. 1.1) Reported by Evgeniy Edigarev - GIGABYTE GA-P55-USB3 (rev. 2.0) Binary file (standard input) matches Corresponding to flashrom svn r1879.
* Properly include current libusb-win32 headerStefan Tauner2015-01-261-0/+5
| | | | | | | | | | | | | | Libusb-win32 is using a different header file name (lusb0_usb.h) for a while. Use that on Windows builds to make clear that this is currently the correct header to include. Hopefully this will change soonish by migrating away from libusb-0. Corresponding to flashrom svn r1877. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Let pkg-config work with cross-compilersStefan Tauner2015-01-261-4/+6
| | | | | | | | | | | | | | | | | | | | In cross-compiler setups pkg-config often needs some help to determine the correct libraries. This can be done for example by setting PKG_CONFIG_LIBDIR to point to the directory where the cross-compile .pc files are located. If PKG_CONFIG_LIBDIR was not set already outside of the Makefile we set it according to LIBS_BASE and add the respective path to the linker's rpath. This makes it possible to easily cross-compile by only setting CC and LIBS_BASE on the command line. This patch also removes the explicit default for LIBS_BASE again because it does not play well with this change and was a bad idea to begin with. Corresponding to flashrom svn r1876. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Fix "unterminated variable reference" on ancient versions of GNU makeStefan Tauner2015-01-251-1/+3
| | | | | | | | | | | Add a workaround for the GNU make that shipped with CentOS 4.9, which apparently does not like semicolons in shell code (and which also ignores info functions altogether by the way). Corresponding to flashrom svn r1875. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow to easily build all optional modulesPatrick Georgi2015-01-191-0/+7
| | | | | | | | | | | | | | | | This patch adds a CONFIG_EVERYTHING flag to the Makefile that sets all CONFIG_* flags to "yes" if they were "no". This provides a comfortable way to ensure maximum code exposure to tools like coverity[0] or clang's scan-build. [0] https://scan.coverity.com/projects/1020 Corresponding to flashrom svn r1869. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refinements for DragonflyBSDStefan Tauner2015-01-101-3/+3
| | | | | | | | | | | | | - /usr/include/cpu/param.h defines PAGE_MASK already, hence use another name for the respective macro in nicintel_eeprom.c. - Since DragonflyBSD 3.6 DPorts is used as the default package manager. Therefore we should use /usr/local/ instead of /usr/pkg/ on default to fetch libraries. Corresponding to flashrom svn r1866. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Remove defaults for CC and ARStefan Tauner2015-01-101-2/+0
| | | | | | | | | | | | | AR defaults to "ar" anyway in GNU make and instead of gcc it is probably a better idea to use just cc. The latter allows to build on freebsd 10 without overriding CC or doing symlink tricks (because it uses clang as cc, provides multiple gcc packages but only versioned binaries without any actual "gcc" command name in the path). Corresponding to flashrom svn r1865. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Unify target OS and CPU architecture checksStefan Tauner2015-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | We do CPU architecture checks once for the makefile in arch.h and once for HW access abstraction in hwaccess.c. This patch unifies related files so that they can share the checks to improve maintainability and reduce the chance of inconsistencies. Furthermore, it refines some of the definitions, which - adds "support" for AARCH64 and PPC64, - adds big-endian handling on arm as well as LE handling on PPC64, - fixes compilation of internal.c on AARCH64 and PPC64. Additionally, this patch continues to unify all OS checks in flashrom by adding a new helper macro IS_WINDOWS. The old header file for architecture checking is renamed to platform.h to reflect its broader scope and all new macros are add in there. Corresponding to flashrom svn r1864. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Allow to easily set a global path prefix for libraries and include filesStefan Tauner2015-01-101-11/+7
| | | | | | | | | Gets rid of a few DOS-specific Makefile hacks. Corresponding to flashrom svn r1863. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refine revision handlingStefan Tauner2015-01-101-2/+7
| | | | | | | | | | | | | Up to now, when compiling flashrom outside a VCS it would print two warnings that are not very clear to the user. This patch adds a new auxilary function to getrevision.sh and uses it in the makefile to print a single and more meaningful message to the user while hiding the warnings from getrevision.sh. Corresponding to flashrom svn r1862. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add support for the MSTAR I2C ISP protocolAlexandre Boeglin2014-12-201-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basically, among other chips, MSTAR manufactures SoCs that equip TV sets and computer screens, and it seems that all of their products use the same in-system programming protocol. Basically, they use the DDC channel of VGA or DVI connectors, which is actually an I2C bus, to encapsulate SPI frames (the flash chip is connected to the SoC through an SPI bus). I wrote this patch since the screen I bought had a software bug, and the manufacturer only released a new firmware binary, but no tool or instructions on flashing it. More details can be found here: http://boeglin.org/blog/index.php?entry=Flashing-a-BenQ-Z-series-for-free(dom) I only read code from Linux kernel archives published by Acer to figure out the protocol (for a touchscreen controller and an NFC chip, both by MSTAR, that share the same ISP protocol), so I don't think there are any legal problems with it. Compilation is currently disabled by default in the Makefile. If in doubt, additional Makefile bugs were added by Stefan. Corresponding to flashrom svn r1860. Signed-off-by: Alexandre Boeglin <alex@boeglin.org> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Refactor some CLI-relevant partsStefan Tauner2014-08-081-1/+1
| | | | | | | | | | | | | | | Begin to move functions that clearly belong to the (command line) user interface out of flashrom's core files like flashrom.c. - Refine messages within check_chip_supported(), rename it to print_chip_support_status() and move it to newly created cli_common.c. - Move flashbuses_to_text() to cli_common.c as well. - Move global verbosity variables to cli_output.c. Corresponding to flashrom svn r1841. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Unify non-shifted and shifted JEDEC accessCarl-Daniel Hailfinger2014-08-081-1/+1
| | | | | | | | | | | | | | | | | | Some Parallel bus chips have a 16-bit mode and an 8-bit mode. They use normal JEDEC addresses for 16-bit mode and shifted addresses (by 1 bit) for 8-bit mode. Some programmers can access them in 16-bit mode, but on all flashrom-supported programmers so far, we access them in 8-bit mode. This means we have to shift the addresses but apart from the addresses we can share the code. This patch makes this possible by checking the chip's FEATURE_ADDR_SHIFTED flag in common JEDEC functions and applying the right addresses respectively. Corresponding to flashrom svn r1840. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Refactor unlocking of many chips with locking at register space address +2Carl-Daniel Hailfinger2014-08-031-1/+1
| | | | | | | | | | | This includes PMC Pm49*, SST 49LF00*, ST M50* and Winbond W39* families. The erase and write test status bits of all affected chips have been reset. Corresponding to flashrom svn r1833. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Add new programmer for SPI EEPROMs attached to Intel 82580 NICsRicardo Ribalda Delgado2014-07-281-0/+14
| | | | | | | | | | | | | | | | | This patch lets you read and write the EEPROM on 82580-based gigabit NIC cards. So far it has been tested on copper NICs only, but other variants employing this controller should work too. It is a nice substitution for the official eeupdate tool. Speed is quite decent: less than 4 seconds for erases or writes of 32 kB. Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Corresponding to flashrom svn r1832. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at>
* Introduce helpers.cStefan Tauner2014-06-121-1/+1
| | | | | | | | | | Move some suitable functions there, add it to the Makefile, but leave the declarations in flash.h for now. Corresponding to flashrom svn r1819. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add default arguments for the default programmer (only)Stefan Tauner2014-06-021-0/+6
| | | | | | | | | This code exists thanks to food for thought from Urja Rannikko. Corresponding to flashrom svn r1814. Signed-off-by: Stefan Tauner <stefan.tauner@alumni.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add IT8212F as programmerStefan Tauner2014-06-011-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | This PCI PATA controller can use 3V parallel flash up to 128 kB. My card was identified as: PCI 1283:8212, subsystem 1283:0001. and labelled as: Innovision Multimedia LTD. EIO ATA133 RAID (DM-8401 Ver A) This particular card did not require setting of any GPIO signals to enable flash writing. My card has Pm39LV512 in PLCC32 package without socket. Rebased by Stefan (automatic cleanup, some PCI changes, changed enable bit handling). Committed with test state NT because the rebased version was not tested on real hardware (yet). Binary file (standard input) matches Corresponding to flashrom svn r1812.
OpenPOWER on IntegriCloud