summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* If a chip has any TEST_BAD_* flag set, we don't even list the unsupported ↵Carl-Daniel Hailfinger2008-11-282-6/+11
| | | | | | | | | | | functions, giving the user the impression that the Unsupported functions are tested. Corresponding to flashrom svn r352 and coreboot v2 svn r3780. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* Add support for the AMD/ATI SB600 southbridge SPI functionalityJason Wang2008-11-287-19/+245
| | | | | | | | | | | This has been tested by Uwe Hermann on an RS690/SB600 board. Reviewed-by: Joe Bao <zheng.bao@amd.com> Corresponding to flashrom svn r351 and coreboot v2 svn r3779. Signed-off-by: Jason Wang <Qingpei.Wang@amd.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add SST25VF080B flash chip supportJason Wang2008-11-281-0/+1
| | | | | | | | | | | | This is the first chip which uses the infrastructure for alternative erase commands, namely spi_chip_erase_60_c7(). Reviewed-by: Joe Bao <zheng.bao@amd.com> Corresponding to flashrom svn r350 and coreboot v2 svn r3776. Signed-off-by: Jason Wang <Qingpei.Wang@amd.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Flashrom already has the following probe functionsCarl-Daniel Hailfinger2008-11-283-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | - probe_spi_rdid with opcode 0x9f, usually 3 bytes ID - probe_spi_res with opcode 0xab, usually 1 byte ID We are missing the following probe function: - probe_spi_rems with opcode 0x90, usually 2 bytes ID RDID provides best specifity (manufacturer, device class and device) and RES is supported by quite a few old chips. However, RES only returns one byte and there are multiple flash chips with different sizes on the market and all of them have the same RES ID. REMS is from the same age as RES, but it provides a manufacturer and a device ID. It is therefore on par with the probing for parallel flash chips and specific enough. The order in which chips should be detected is as follows: 1. RDID 2. REMS 3. RES Corresponding to flashrom svn r349 and coreboot v2 svn r3775. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* The existing check in probe_spi_res() was right for SPI controllers which ↵Carl-Daniel Hailfinger2008-11-271-7/+5
| | | | | | | | | | | | | | | | | support all commands, but may not exist For controllers which support only a subset of commands, it will fail in unexpected ways. Even if a command is supported by the controller, it may be unavailable if the controller is locked down. The new logic checks if RDID could be issued and its return values made sense (not 0xff 0xff 0xff). In that case, RES probing is not performed. Otherwise, we try RES. There is one drawback: If RDID returned unexpected values, we don't issue a RES probe. However, in that case we should try to match RDID anyway. Corresponding to flashrom svn r348 and coreboot v2 svn r3774. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: FENG yu ning <fengyuning1984@gmail.com>
* Add support for 32Mbit SPI flash SST25VF032BTero O Peippola2008-11-241-0/+1
| | | | | | | | | | Tested on gigabyte m57sli. File util/flashrom/flash.h already had correct ID for that part. Corresponding to flashrom svn r347 and coreboot v2 svn r3769. Signed-off-by: Tero O Peippola <xeropp@gmail.com> Acked-by: Peter Stuge <peter@stuge.se>
* Currently flashrom assumes every vendor BIOS shares our view about which SPI ↵Carl-Daniel Hailfinger2008-11-181-9/+5
| | | | | | | | | | | | | opcodes should be placed in which location Move to a less optimistic implementation and actually use the generic SPI read functions. They're useful for abstracting exactly this stuff and that makes them the preferred choice. Corresponding to flashrom svn r346 and coreboot v2 svn r3758. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Check for failed SPI command execution in flashromCarl-Daniel Hailfinger2008-11-182-21/+71
| | | | | | | | | | | | | | | | | | | Although SPI itself does not have a mechanism to signal command failure, the SPI host may be unable to send a given command over the wire due to security or hardware limitations. The current code ignores these mechanisms completely and simply assumes almost every command succeeds. Complain if SPI command execution fails. Since locked down Intel chipsets (like the one we had problems with earlier) only allow a small subset of commands, find the common subset of commands between the chipset and the ROM in the chip erase case. That is accomplished by the new spi_chip_erase_60_c7() which can be used for chips supporting both 0x60 and 0xc7 chip erase commands. Both parts of the patch address problems seen in the real world. The increased verbosity for the error case will help us diagnose and address problems better. Corresponding to flashrom svn r345 and coreboot v2 svn r3757. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Implement read support for the following Atmel chipsCarl-Daniel Hailfinger2008-11-181-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | AT25DF021 AT25DF041A AT25DF081 AT25DF161 AT25DF321A AT25DF641 AT25F512B AT25FS010 AT25FS040 AT26DF041 AT26DF081A AT26DF161 AT26DF161A AT26DF321 AT26F004 I double-checked the data sheets and am confident this will work. Corresponding to flashrom svn r344 and coreboot v2 svn r3756. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* SST39VF020 TEST_OK_ PROBE READ ERASE WRITEMart Raudsepp2008-11-171-1/+1
| | | | | | | | | Tested fully on a ThinCan DBE61A Corresponding to flashrom svn r343 and coreboot v2 svn r3755. Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee> Acked-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
* The AT25 and AT26 series SPI chips from Atmel are plain EEPROMsCarl-Daniel Hailfinger2008-11-153-2/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT45 series SPI chips are DataFlash EEPROMs which means they have odd (non-power-of-two) sector sizes, but some of the DataFlash chips can be configured or ordered with power-of-two sector sizes. Add probe support for the following Atmel SPI chips: AT25DF021 AT25DF041A AT25DF081 AT25DF161 AT25DF321A AT25DF641 AT25F512B AT25FS010 AT25FS040 AT26DF041 AT26DF081A AT26DF161 AT26DF161A AT26DF321 AT26F004 AT45CS1282 AT45DB011D AT45DB021D AT45DB041D AT45DB081D AT45DB161D AT45DB321C AT45DB321D AT45DB642D Add an explanation why the following chips can't be probed: AT45BR3214B AT45D011 AT45D021A AT45D041A AT45D081A AT45D161 AT45DB011 AT45DB011B AT45DB021A AT45DB021B AT45DB041A AT45DB081A AT45DB161 AT45DB161B AT45DB321 AT45DB321B AT45DB642 Add the ID, but no probing function for this chip: AT25F512A Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andriy Gapon <avg@icyb.net.ua> Corresponding to flashrom svn r342 and coreboot v2 svn r3754. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Myles Watson <mylesgw@gmail.com>
* SST39SF040 TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2008-11-081-1/+1
| | | | | | | | | Per report from Mario Rogen. Thanks! Corresponding to flashrom svn r341 and coreboot v2 svn r3736. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* The ST M25P16 chip has been confirmed to work fine for probe, read, Binary ↵Carl-Daniel Hailfinger2008-11-051-1/+1
| | | | | | file (standard input) matches Corresponding to flashrom svn r340 and coreboot v2 svn r3731.
* Add support for 8 new chips to flashrom and fix up 2 existing chips as wellCarl-Daniel Hailfinger2008-11-042-12/+18
| | | | | | | | | | | | | Replace age-old TODO comments with real explanations. Fixed chips: Fujitsu MBM29F400TC (ID definition) Macronix MX29F002T (chip name) New chips: Fujitsu MBM29F004BC Fujitsu MBM29F004TC Fujitsu MBM29F400BC Macronix MX25L512 Macronix MX25L1005 Macronix MX25L2005 Macronix MX25L6405 Macronix MX29F002B Straight from the data sheets, compile tested only. Corresponding to flashrom svn r339 and coreboot v2 svn r3730. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Dump ICH8/ICH9/ICH10 SPI registers This helps a lot if we have to track down ↵Carl-Daniel Hailfinger2008-11-031-5/+45
| | | | | | | | | configuration weirdnesses Corresponding to flashrom svn r338 and coreboot v2 svn r3723. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Add additional SPI sector erase and chip erase command functions to flashromCarl-Daniel Hailfinger2008-11-033-16/+42
| | | | | | | | | | | | | | | Not all chips support all commands, so allow the implementer to select the matching function. Fix a layering violation in ICH SPI code to be less bad. Still not perfect, but the new code is shorter, more generic and architecturally more sound. TODO (in a separate patch): - move the generic sector erase code to spi.c - decide which erase command to use based on info about the chip - create a generic spi_erase_all_sectors function which calls the generic sector erase function Thanks to Stefan for reviewing and commenting. Corresponding to flashrom svn r337 and coreboot v2 svn r3722. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Drop nr/opcode_index parameter from run_opcode and search the opmenu for the ↵Stefan Reinauer2008-11-021-15/+45
| | | | | | | | | | | opcode instead This is slightly slower (ha, ha), but works on boards with a locked opmenu. Tested on ICH7 and works. Corresponding to flashrom svn r336 and coreboot v2 svn r3721. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for the ST M50FW002 chip to flashromCarl-Daniel Hailfinger2008-11-022-0/+2
| | | | | | | | | Identification only, erase/write are not implemented. Corresponding to flashrom svn r335 and coreboot v2 svn r3717. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Elia Yehuda <z4ziggy@gmail.com>
* Mark two more chips as fully testedUwe Hermann2008-10-301-2/+2
| | | | | | | | | | | | - SST SST39SF010A - Winbond W29C011 Tested by me on actual hardware, all operations. Corresponding to flashrom svn r334 and coreboot v2 svn r3708. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Flashrom support for some Numonyx parts (M25PE)Stefan Reinauer2008-10-293-0/+29
| | | | | | | | | Using block erase d8 as discussed with Peter Stuge Corresponding to flashrom svn r333 and coreboot v2 svn r3707. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Enable SPI boot flash support on EP80579, which has the ICH7 register setEd Swierk2008-10-291-1/+1
| | | | | | | Corresponding to flashrom svn r332 and coreboot v2 svn r3706. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Acked-by: Ed Swierk <eswierk@aristanetworks.com>
* Mark Winbond W39V040FA (512 KB) as fully supportedUwe Hermann2008-10-281-1/+1
| | | | | | | | | | Tested by Martin Stecklum <stecky@gmx.net> (both write and erase). The tests were done on an MSI MS-7065 board, so that's supported now too. Corresponding to flashrom svn r331 and coreboot v2 svn r3697. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for the Intel 82371MX (MPIIX) southbridgeUwe Hermann2008-10-281-3/+5
| | | | | | | | | | Untested, but should work just as well as the other *PIIX* southbridges according to the datasheets. Corresponding to flashrom svn r330 and coreboot v2 svn r3696. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Add support for the Intel 82371FB PIIX and 82371SB (PIIX3) southbridgesUwe Hermann2008-10-261-1/+7
| | | | | | | | | Tested on PIIX3 hardware. Corresponding to flashrom svn r329 and coreboot v2 svn r3694. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Corey Osgood <corey.osgood@gmail.com>
* Add support for the VIA VT82C586A/B chipset, improve documentationUwe Hermann2008-10-251-1/+4
| | | | | | | Corresponding to flashrom svn r328 and coreboot v2 svn r3693. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Reduce serial output, otherwise flashing will fail very oftenUwe Hermann2008-10-211-2/+4
| | | | | | | | | This has been tested on hardware by me. Corresponding to flashrom svn r327 and coreboot v2 svn r3682. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Coding-style fixes for flashrom, partly indent-aidedUwe Hermann2008-10-1813-233/+284
| | | | | | | Corresponding to flashrom svn r326 and coreboot v2 svn r3669. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Allow the SiS 620 chipset to detect and read at least 256kb chipsUrja Rannikko2008-10-181-0/+11
| | | | | | | | | | Based on the 5595 datasheet and uniflash 1.40 sources, only looking for info about SiS620. Corresponding to flashrom svn r325 and coreboot v2 svn r3668. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Acked-by: Peter Stuge <peter@stuge.se>
* SB600 has four write once LPC ROM protect areasMarc Jones2008-10-151-0/+21
| | | | | | | | | | | | It is not possible to write enable that area once the register is set so print a warning. Corresponding to flashrom svn r324 and coreboot v2 svn r3659. Signed-off-by: Marc Jones <marcj.jones@amd.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add ICH10 supportCarl-Daniel Hailfinger2008-10-101-0/+10
| | | | | | | | | | The ICH9 and ICH10 data sheets are identical regarding FWH/SPI flash interfaces, so this just adds the required PCI IDs. Corresponding to flashrom svn r323 and coreboot v2 svn r3648. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Peter Stuge <peter@stuge.se>
* Check that a filename was specified also when using force readPeter Stuge2008-10-101-0/+4
| | | | | | | Corresponding to flashrom svn r322 and coreboot v2 svn r3647. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Support for AM29F002(N)B[BT]Mats Erik Andersson2008-10-072-1/+5
| | | | | | | | | | | Fully tested on AM29F002NBT. Probing, reading, and erasing use the Jedec-routines, whereas writing resort to the recent write_en29f002a(), since also these chips use a byte wise algorithm. Corresponding to flashrom svn r321 and coreboot v2 svn r3639. Signed-off-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* This patch fixes support for the AT49F002N(T) chip in the flashrom toolTim ter Laak2008-09-301-2/+2
| | | | | | | | | | | | | | It replaces the write function to one based on write_byte_program_jedec() instead of write_page_write_jedec(), as this part does not support page programming. I have verified the NT variant to fully work now, and adjusted the test status accordingly. The N variant *should* also work with this patch, but remains untested. Corresponding to flashrom svn r320 and coreboot v2 svn r3619. Signed-off-by: Tim ter Laak <timl@scintilla.utwente.nl> Acked-by: Peter Stuge <peter@stuge.se>
* ST M29F040B status TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2008-09-301-1/+1
| | | | | | | | | Per report from Daniel Lindenaar. Thanks! Corresponding to flashrom svn r319 and coreboot v2 svn r3618. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Fix typo in r3615 (TEST_PREW -> TEST_OK_PREW)Peter Stuge2008-09-291-1/+1
| | | | | | | Corresponding to flashrom svn r318 and coreboot v2 svn r3616. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Mark the SyncMOS S29C51002T as workingUwe Hermann2008-09-291-1/+1
| | | | | | | | | All operations tested by me on hardware. Corresponding to flashrom svn r317 and coreboot v2 svn r3615. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Activate proper support for EN29F002(A)(N)[BT]Mats Erik Andersson2008-09-264-10/+54
| | | | | | | | | | | | Fully tested for Probe/Read/Erase/Write on EN29F002NT. Jedec subroutines 'probe_jedec()' and 'erase_chip_jedec()' are still in use, but a tailored 'write_en29f002a()' is needed due to a byte wise writing mechanism for this chip. Corresponding to flashrom svn r316 and coreboot v2 svn r3602. Signed-off-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Winbond W49V002A TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2008-09-101-1/+1
| | | | | | | | | Per report from Kevin O'Connor. Thanks Kevin! Corresponding to flashrom svn r315 and coreboot v2 svn r3570. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Debug print actual time base calculated by myusec_calibrate_delay()Peter Stuge2008-09-071-1/+7
| | | | | | | Corresponding to flashrom svn r314 and coreboot v2 svn r3569. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Only find "unknown .. SPI chip" if no other chip was foundPeter Stuge2008-09-031-3/+8
| | | | | | | | | | | | | This removes the false positive matches we've been seeing, and also removes the true positive match in case there is more than one flash chip and the 2nd or 3rd are unknown - but I think that case is uncommon enough to warrant the improvement in the common case. Use flashrom -frc forced read if you have the uncommon case, and/or please add the flash chip to the flashchips array. Corresponding to flashrom svn r313 and coreboot v2 svn r3562. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* SST49LF016C TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2008-09-021-1/+1
| | | | | | | | | Per test report from Bari Ari. Thanks! Corresponding to flashrom svn r312 and coreboot v2 svn r3557. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* SST25VF016B TEST_OK_ PROBE READ ERASE WRITEPeter Stuge2008-08-271-1/+1
| | | | | | | | | Per test report from Ward. Corresponding to flashrom svn r311 and coreboot v2 svn r3541. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Recognize the Intel EP80579 LPC flash interfaceEd Swierk2008-08-201-0/+1
| | | | | | | Corresponding to flashrom svn r310 and coreboot v2 svn r3532. Signed-off-by: Ed Swierk <eswierk@arastra.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* Add support for MSI KT4V to flashromSean Nelson2008-08-191-0/+47
| | | | | | | | | | The KT4V is autodetected and supports the KT3 Ultra 2 with "-m msi:kt4v" (but is not autodetected, yet). Corresponding to flashrom svn r309 and coreboot v2 svn r3528. Signed-off-by: Sean Nelson <snelson@nmt.edu> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix error -EINVAL on mmap()Segher Boessenkool2008-08-121-8/+8
| | | | | | | | | | | | | Don't calculate "flash_baseaddr" until the final value of "size" is known, otherwise we end up trying to map a page right after the end of memory. Fixes #112. Corresponding to flashrom svn r308 and coreboot v2 svn r3502. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* ST M50FW040 TEST_OK PROBE READ ERASE WRITEPeter Stuge2008-08-081-1/+1
| | | | | | | | | Per test report from Marcel Konrad. Thanks! Corresponding to flashrom svn r307 and coreboot v2 svn r3485. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Peter Stuge <peter@stuge.se>
* Update copyright yearStefan Reinauer2008-08-021-1/+1
| | | | | | | Corresponding to flashrom svn r306 and coreboot v2 svn r3464. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Tested another intel chipStefan Reinauer2008-08-021-1/+1
| | | | | | | Corresponding to flashrom svn r305 and coreboot v2 svn r3462. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de>
* Winbond W39V040C and MSI K8T Neo2-FPeter Stuge2008-07-215-1/+113
| | | | | | | | | | | | | | | W39V040C does standard JEDEC commands except chip erase so add a small driver. probe_w39v040c() prints the block lock pin status when a chip is found. The Neo2 board enable matches on 8237-internal IDE and onboard NIC PCI IDs. Many thanks to Daniel McLellan for testing all of this on hardware! Build tested by Uwe. Corresponding to flashrom svn r304 and coreboot v2 svn r3431. Signed-off-by: Peter Stuge <peter@stuge.se> Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
* Fix and clean up coreboot image detection heuristicCarl-Daniel Hailfinger2008-07-111-12/+20
| | | | | | | | | Additional compile fix for NetBSD. Corresponding to flashrom svn r303 and coreboot v2 svn r3420. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Acked-by: Stefan Reinauer <stepan@coresystems.de>
OpenPOWER on IntegriCloud