Add additional SPI sector erase and chip erase command functions to flashrom

Not all chips support all commands, so allow the implementer to select
the matching function. Fix a layering violation in ICH SPI code to be
less bad. Still not perfect, but the new code is shorter, more generic and
architecturally more sound. TODO (in a separate patch): - move the generic
sector erase code to spi.c - decide which erase command to use based on info
about the chip - create a generic spi_erase_all_sectors function which calls
the generic sector erase function Thanks to Stefan for reviewing and commenting.

Corresponding to flashrom svn r337 and coreboot v2 svn r3722.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>

1 files changed, 34 insertions, 0 deletions

diff --git a/spi.c b/spi.c
index 83624fa..3bd29b0 100644
--- a/spi.c
+++ b/spi.c
@@ -271,6 +271,22 @@ void spi_prettyprint_status_register(struct flashchip *flash)
 	}
 }
 
+int spi_chip_erase_60(struct flashchip *flash)
+{
+	const unsigned char cmd[JEDEC_CE_60_OUTSIZE] = {JEDEC_CE_60};
+	
+	spi_disable_blockprotect();
+	spi_write_enable();
+	/* Send CE (Chip Erase) */
+	spi_command(sizeof(cmd), 0, cmd, NULL);
+	/* Wait until the Write-In-Progress bit is cleared.
+	 * This usually takes 1-85 s, so wait in 1 s steps.
+	 */
+	while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+		sleep(1);
+	return 0;
+}
+
 int spi_chip_erase_c7(struct flashchip *flash)
 {
 	const unsigned char cmd[JEDEC_CE_C7_OUTSIZE] = { JEDEC_CE_C7 };
@@ -287,6 +303,24 @@ int spi_chip_erase_c7(struct flashchip *flash)
 	return 0;
 }
 
+int spi_block_erase_52(const struct flashchip *flash, unsigned long addr)
+{
+	unsigned char cmd[JEDEC_BE_52_OUTSIZE] = {JEDEC_BE_52};
+
+	cmd[1] = (addr & 0x00ff0000) >> 16;
+	cmd[2] = (addr & 0x0000ff00) >> 8;
+	cmd[3] = (addr & 0x000000ff);
+	spi_write_enable();
+	/* Send BE (Block Erase) */
+	spi_command(sizeof(cmd), 0, cmd, NULL);
+	/* Wait until the Write-In-Progress bit is cleared.
+	 * This usually takes 100-4000 ms, so wait in 100 ms steps.
+	 */
+	while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+		usleep(100 * 1000);
+	return 0;
+}
+
 /* Block size is usually
  * 64k for Macronix
  * 32k for SST