From c1fa846d0c23dee4b214d454415a576bec0fc5d2 Mon Sep 17 00:00:00 2001
From: Paul B Mahol <onemda@gmail.com>
Date: Fri, 17 Jul 2015 18:44:16 +0000
Subject: avfilter: add sidechain compress audio filter

Signed-off-by: Paul B Mahol <onemda@gmail.com>
---
 doc/filters.texi | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

(limited to 'doc')

diff --git a/doc/filters.texi b/doc/filters.texi
index 35a24cc..f6380c9 100644
--- a/doc/filters.texi
+++ b/doc/filters.texi
@@ -622,6 +622,7 @@ slope
 Specify the band-width of a filter in width_type units.
 @end table
 
+@anchor{amerge}
 @section amerge
 
 Merge two or more audio streams into a single multi-channel stream.
@@ -2020,6 +2021,7 @@ Applies only to double-pole filter.
 The default is 0.707q and gives a Butterworth response.
 @end table
 
+@anchor{pan}
 @section pan
 
 Mix channels with specific gain levels. The filter accepts the output
@@ -2121,6 +2123,66 @@ At end of filtering it displays @code{track_gain} and @code{track_peak}.
 Convert the audio sample format, sample rate and channel layout. It is
 not meant to be used directly.
 
+@section sidechaincompress
+
+This filter acts like normal compressor but has the ability to compress
+detected signal using second input signal.
+It needs two input streams and returns one output stream.
+First input stream will be processed depending on second stream signal.
+The filtered signal then can be filtered with other filters in later stages of
+processing. See @ref{pan} and @ref{amerge} filter.
+
+The filter accepts the following options:
+
+@table @option
+@item threshold
+If a signal of second stream raises above this level it will affect the gain
+reduction of first stream.
+By default is 0.125. Range is between 0.00097563 and 1.
+
+@item ratio
+Set a ratio about which the signal is reduced. 1:2 means that if the level
+raised 4dB above the threshold, it will be only 2dB above after the reduction.
+Default is 2. Range is between 1 and 20.
+
+@item attack
+Amount of milliseconds the signal has to rise above the threshold before gain
+reduction starts. Default is 20. Range is between 0.01 and 2000.
+
+@item release
+Amount of milliseconds the signal has to fall bellow the threshold before
+reduction is decreased again. Default is 250. Range is between 0.01 and 9000.
+
+@item makeup
+Set the amount by how much signal will be amplified after processing.
+Default is 2. Range is from 1 and 64.
+
+@item knee
+Curve the sharp knee around the threshold to enter gain reduction more softly.
+Default is 2.82843. Range is between 1 and 8.
+
+@item link
+Choose if the @code{average} level between all channels of side-chain stream
+or the louder(@code{maximum}) channel of side-chain stream affects the
+reduction. Default is @code{average}.
+
+@item detection
+Should the exact signal be taken in case of @code{peak} or an RMS one in case
+of @code{rms}. Default is @code{rms} which is mainly smoother.
+@end table
+
+@subsection Examples
+
+@itemize
+@item
+Full ffmpeg example taking 2 audio inputs, 1st input to be compressed
+depending on the signal of 2nd input and later compressed signal to be
+merged with 2nd input:
+@example
+ffmpeg -i main.flac -i sidechain.flac -filter_complex "[1:a]asplit=2[sc][mix];[0:a][sc]sidechaincompress[compr];[compr][mix]amerge"
+@end example
+@end itemize
+
 @section silencedetect
 
 Detect silence in an audio stream.
-- 
cgit v1.1