diff options
Diffstat (limited to 'doc/indevs.texi')
| -rw-r--r-- | doc/indevs.texi | 249 |
1 files changed, 244 insertions, 5 deletions
diff --git a/doc/indevs.texi b/doc/indevs.texi index e1c058b..79f786f 100644 --- a/doc/indevs.texi +++ b/doc/indevs.texi @@ -1,10 +1,10 @@ @chapter Input Devices @c man begin INPUT DEVICES -Input devices are configured elements in Libav which allow to access +Input devices are configured elements in FFmpeg which allow to access the data coming from a multimedia device attached to your system. -When you configure your Libav build, all the supported input devices +When you configure your FFmpeg build, all the supported input devices are enabled by default. You can list all available ones using the configure option "--list-indevs". @@ -55,6 +55,87 @@ For more information see: BSD video input device. +@section dshow + +Windows DirectShow input device. + +DirectShow support is enabled when FFmpeg is built with mingw-w64. +Currently only audio and video devices are supported. + +Multiple devices may be opened as separate inputs, but they may also be +opened on the same input, which should improve synchronism between them. + +The input name should be in the format: + +@example +@var{TYPE}=@var{NAME}[:@var{TYPE}=@var{NAME}] +@end example + +where @var{TYPE} can be either @var{audio} or @var{video}, +and @var{NAME} is the device's name. + +@subsection Options + +If no options are specified, the device's defaults are used. +If the device does not support the requested options, it will +fail to open. + +@table @option + +@item video_size +Set the video size in the captured video. + +@item framerate +Set the framerate in the captured video. + +@item sample_rate +Set the sample rate (in Hz) of the captured audio. + +@item sample_size +Set the sample size (in bits) of the captured audio. + +@item channels +Set the number of channels in the captured audio. + +@item list_devices +If set to @option{true}, print a list of devices and exit. + +@item list_options +If set to @option{true}, print a list of selected device's options +and exit. + +@end table + +@subsection Examples + +@itemize + +@item +Print the list of DirectShow supported devices and exit: +@example +$ ffmpeg -list_devices true -f dshow -i dummy +@end example + +@item +Open video device @var{Camera}: +@example +$ ffmpeg -f dshow -i video="Camera" +@end example + +@item +Open video device @var{Camera} and audio device @var{Microphone}: +@example +$ ffmpeg -f dshow -i video="Camera":audio="Microphone" +@end example + +@item +Print the list of supported options in selected device and exit: +@example +$ ffmpeg -list_options true -f dshow -i video="Camera" +@end example + +@end itemize + @section dv1394 Linux DV 1394 input device. @@ -95,7 +176,7 @@ A JACK input device creates one or more JACK writable clients, one for each audio channel, with name @var{client_name}:input_@var{N}, where @var{client_name} is the name provided by the application, and @var{N} is a number which identifies the channel. -Each writable client will send the acquired data to the Libav input +Each writable client will send the acquired data to the FFmpeg input device. Once you have created one or more JACK readable clients, you need to @@ -133,10 +214,168 @@ $ jack_connect metro:120_bpm ffmpeg:input_1 For more information read: @url{http://jackaudio.org/} +@section lavfi + +Libavfilter input virtual device. + +This input device reads data from the open output pads of a libavfilter +filtergraph. + +For each filtergraph open output, the input device will create a +corresponding stream which is mapped to the generated output. Currently +only video data is supported. The filtergraph is specified through the +option @option{graph}. + +To enable this input device, you need to configure your build with +@code{--enable-libavfilter}. + +@subsection Options + +@table @option + +@item graph +Specify the filtergraph to use as input. Each video open output must be +labelled by a unique string of the form "out@var{N}", where @var{N} is a +number starting from 0 corresponding to the mapped input stream +generated by the device. +The first unlabelled output is automatically assigned to the "out0" +label, but all the others need to be specified explicitely. + +If not specified defaults to the filename specified for the input +device. +@end table + +@subsection Examples + +@itemize +@item +Create a color video stream and play it back with @file{ffplay}: +@example +ffplay -f lavfi -graph "color=pink [out0]" dummy +@end example + +@item +As the previous example, but use filename for specifying the graph +description, and omit the "out0" label: +@example +ffplay -f lavfi color=pink +@end example + +@item +Create three different video test filtered sources and play them: +@example +ffplay -f lavfi -graph "testsrc [out0]; testsrc,hflip [out1]; testsrc,negate [out2]" test3 +@end example + +@item +Read an audio stream from a file using the amovie source and play it +back with @file{ffplay}: +@example +ffplay -f lavfi "amovie=test.wav" +@end example + +@item +Read an audio stream and a video stream and play it back with +@file{ffplay}: +@example +ffplay -f lavfi "movie=test.avi[out0];amovie=test.wav[out1]" +@end example + +@end itemize + @section libdc1394 IIDC1394 input device, based on libdc1394 and libraw1394. +@section openal + +The OpenAL input device provides audio capture on all systems with a +working OpenAL 1.1 implementation. + +To enable this input device during configuration, you need OpenAL +headers and libraries installed on your system, and need to configure +FFmpeg with @code{--enable-openal}. + +OpenAL headers and libraries should be provided as part of your OpenAL +implementation, or as an additional download (an SDK). Depending on your +installation you may need to specify additional flags via the +@code{--extra-cflags} and @code{--extra-ldflags} for allowing the build +system to locate the OpenAL headers and libraries. + +An incomplete list of OpenAL implementations follows: + +@table @strong +@item Creative +The official Windows implementation, providing hardware acceleration +with supported devices and software fallback. +See @url{http://openal.org/}. +@item OpenAL Soft +Portable, open source (LGPL) software implementation. Includes +backends for the most common sound APIs on the Windows, Linux, +Solaris, and BSD operating systems. +See @url{http://kcat.strangesoft.net/openal.html}. +@item Apple +OpenAL is part of Core Audio, the official Mac OS X Audio interface. +See @url{http://developer.apple.com/technologies/mac/audio-and-video.html} +@end table + +This device allows to capture from an audio input device handled +through OpenAL. + +You need to specify the name of the device to capture in the provided +filename. If the empty string is provided, the device will +automatically select the default device. You can get the list of the +supported devices by using the option @var{list_devices}. + +@subsection Options + +@table @option + +@item channels +Set the number of channels in the captured audio. Only the values +@option{1} (monaural) and @option{2} (stereo) are currently supported. +Defaults to @option{2}. + +@item sample_size +Set the sample size (in bits) of the captured audio. Only the values +@option{8} and @option{16} are currently supported. Defaults to +@option{16}. + +@item sample_rate +Set the sample rate (in Hz) of the captured audio. +Defaults to @option{44.1k}. + +@item list_devices +If set to @option{true}, print a list of devices and exit. +Defaults to @option{false}. + +@end table + +@subsection Examples + +Print the list of OpenAL supported devices and exit: +@example +$ ffmpeg -list_devices true -f openal -i dummy out.ogg +@end example + +Capture from the OpenAL device @file{DR-BT101 via PulseAudio}: +@example +$ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out.ogg +@end example + +Capture from the default device (note the empty string '' as filename): +@example +$ ffmpeg -f openal -i '' out.ogg +@end example + +Capture from two devices simultaneously, writing to two different files, +within the same @file{ffmpeg} command: +@example +$ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out1.ogg -f openal -i 'ALSA Default' out2.ogg +@end example +Note: not all OpenAL implementations support multiple simultaneous capture - +try the latest OpenAL Soft if the above does not work. + @section oss Open Sound System input device. @@ -199,10 +438,10 @@ tools. @example # Grab and show the input of a video4linux device, frame rate is set # to the default of 25/1. -avplay -s 320x240 -f video4linux /dev/video0 +ffplay -s 320x240 -f video4linux /dev/video0 # Grab and show the input of a video4linux2 device, autoadjust size. -avplay -f video4linux2 /dev/video0 +ffplay -f video4linux2 /dev/video0 # Grab and record the input of a video4linux2 device, autoadjust size, # frame rate value defaults to 0/0 so it is read from the video4linux2 |
