diff options
Diffstat (limited to 'doc/fftools-common-opts.texi')
-rw-r--r-- | doc/fftools-common-opts.texi | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/doc/fftools-common-opts.texi b/doc/fftools-common-opts.texi new file mode 100644 index 0000000..2e7c9f7 --- /dev/null +++ b/doc/fftools-common-opts.texi @@ -0,0 +1,375 @@ +All the numerical options, if not specified otherwise, accept a string +representing a number as input, which may be followed by one of the SI +unit prefixes, for example: 'K', 'M', or 'G'. + +If 'i' is appended to the SI unit prefix, the complete prefix will be +interpreted as a unit prefix for binary multiples, which are based on +powers of 1024 instead of powers of 1000. Appending 'B' to the SI unit +prefix multiplies the value by 8. This allows using, for example: +'KB', 'MiB', 'G' and 'B' as number suffixes. + +Options which do not take arguments are boolean options, and set the +corresponding value to true. They can be set to false by prefixing +the option name with "no". For example using "-nofoo" +will set the boolean option with name "foo" to false. + +@anchor{Stream specifiers} +@section Stream specifiers +Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers +are used to precisely specify which stream(s) a given option belongs to. + +A stream specifier is a string generally appended to the option name and +separated from it by a colon. E.g. @code{-codec:a:1 ac3} contains the +@code{a:1} stream specifier, which matches the second audio stream. Therefore, it +would select the ac3 codec for the second audio stream. + +A stream specifier can match several streams, so that the option is applied to all +of them. E.g. the stream specifier in @code{-b:a 128k} matches all audio +streams. + +An empty stream specifier matches all streams. For example, @code{-codec copy} +or @code{-codec: copy} would copy all the streams without reencoding. + +Possible forms of stream specifiers are: +@table @option +@item @var{stream_index} +Matches the stream with this index. E.g. @code{-threads:1 4} would set the +thread count for the second stream to 4. +@item @var{stream_type}[:@var{stream_index}] +@var{stream_type} is one of following: 'v' for video, 'a' for audio, 's' for subtitle, +'d' for data, and 't' for attachments. If @var{stream_index} is given, then it matches +stream number @var{stream_index} of this type. Otherwise, it matches all +streams of this type. +@item p:@var{program_id}[:@var{stream_index}] +If @var{stream_index} is given, then it matches the stream with number @var{stream_index} +in the program with the id @var{program_id}. Otherwise, it matches all streams in the +program. +@item #@var{stream_id} or i:@var{stream_id} +Match the stream by stream id (e.g. PID in MPEG-TS container). +@item m:@var{key}[:@var{value}] +Matches streams with the metadata tag @var{key} having the specified value. If +@var{value} is not given, matches streams that contain the given tag with any +value. +@item u +Matches streams with usable configuration, the codec must be defined and the +essential information such as video dimension or audio sample rate must be present. + +Note that in @command{ffmpeg}, matching by metadata will only work properly for +input files. +@end table + +@section Generic options + +These options are shared amongst the ff* tools. + +@table @option + +@item -L +Show license. + +@item -h, -?, -help, --help [@var{arg}] +Show help. An optional parameter may be specified to print help about a specific +item. If no argument is specified, only basic (non advanced) tool +options are shown. + +Possible values of @var{arg} are: +@table @option +@item long +Print advanced tool options in addition to the basic tool options. + +@item full +Print complete list of options, including shared and private options +for encoders, decoders, demuxers, muxers, filters, etc. + +@item decoder=@var{decoder_name} +Print detailed information about the decoder named @var{decoder_name}. Use the +@option{-decoders} option to get a list of all decoders. + +@item encoder=@var{encoder_name} +Print detailed information about the encoder named @var{encoder_name}. Use the +@option{-encoders} option to get a list of all encoders. + +@item demuxer=@var{demuxer_name} +Print detailed information about the demuxer named @var{demuxer_name}. Use the +@option{-formats} option to get a list of all demuxers and muxers. + +@item muxer=@var{muxer_name} +Print detailed information about the muxer named @var{muxer_name}. Use the +@option{-formats} option to get a list of all muxers and demuxers. + +@item filter=@var{filter_name} +Print detailed information about the filter name @var{filter_name}. Use the +@option{-filters} option to get a list of all filters. +@end table + +@item -version +Show version. + +@item -formats +Show available formats (including devices). + +@item -devices +Show available devices. + +@item -codecs +Show all codecs known to libavcodec. + +Note that the term 'codec' is used throughout this documentation as a shortcut +for what is more correctly called a media bitstream format. + +@item -decoders +Show available decoders. + +@item -encoders +Show all available encoders. + +@item -bsfs +Show available bitstream filters. + +@item -protocols +Show available protocols. + +@item -filters +Show available libavfilter filters. + +@item -pix_fmts +Show available pixel formats. + +@item -sample_fmts +Show available sample formats. + +@item -layouts +Show channel names and standard channel layouts. + +@item -colors +Show recognized color names. + +@item -sources @var{device}[,@var{opt1}=@var{val1}[,@var{opt2}=@var{val2}]...] +Show autodetected sources of the intput device. +Some devices may provide system-dependent source names that cannot be autodetected. +The returned list cannot be assumed to be always complete. +@example +ffmpeg -sources pulse,server=192.168.0.4 +@end example + +@item -sinks @var{device}[,@var{opt1}=@var{val1}[,@var{opt2}=@var{val2}]...] +Show autodetected sinks of the output device. +Some devices may provide system-dependent sink names that cannot be autodetected. +The returned list cannot be assumed to be always complete. +@example +ffmpeg -sinks pulse,server=192.168.0.4 +@end example + +@item -loglevel [repeat+]@var{loglevel} | -v [repeat+]@var{loglevel} +Set the logging level used by the library. +Adding "repeat+" indicates that repeated log output should not be compressed +to the first line and the "Last message repeated n times" line will be +omitted. "repeat" can also be used alone. +If "repeat" is used alone, and with no prior loglevel set, the default +loglevel will be used. If multiple loglevel parameters are given, using +'repeat' will not change the loglevel. +@var{loglevel} is a string or a number containing one of the following values: +@table @samp +@item quiet, -8 +Show nothing at all; be silent. +@item panic, 0 +Only show fatal errors which could lead the process to crash, such as +and assert failure. This is not currently used for anything. +@item fatal, 8 +Only show fatal errors. These are errors after which the process absolutely +cannot continue after. +@item error, 16 +Show all errors, including ones which can be recovered from. +@item warning, 24 +Show all warnings and errors. Any message related to possibly +incorrect or unexpected events will be shown. +@item info, 32 +Show informative messages during processing. This is in addition to +warnings and errors. This is the default value. +@item verbose, 40 +Same as @code{info}, except more verbose. +@item debug, 48 +Show everything, including debugging information. +@end table + +By default the program logs to stderr, if coloring is supported by the +terminal, colors are used to mark errors and warnings. Log coloring +can be disabled setting the environment variable +@env{AV_LOG_FORCE_NOCOLOR} or @env{NO_COLOR}, or can be forced setting +the environment variable @env{AV_LOG_FORCE_COLOR}. +The use of the environment variable @env{NO_COLOR} is deprecated and +will be dropped in a following FFmpeg version. + +@item -report +Dump full command line and console output to a file named +@code{@var{program}-@var{YYYYMMDD}-@var{HHMMSS}.log} in the current +directory. +This file can be useful for bug reports. +It also implies @code{-loglevel verbose}. + +Setting the environment variable @env{FFREPORT} to any value has the +same effect. If the value is a ':'-separated key=value sequence, these +options will affect the report; option values must be escaped if they +contain special characters or the options delimiter ':' (see the +``Quoting and escaping'' section in the ffmpeg-utils manual). + +The following options are recognized: +@table @option +@item file +set the file name to use for the report; @code{%p} is expanded to the name +of the program, @code{%t} is expanded to a timestamp, @code{%%} is expanded +to a plain @code{%} +@item level +set the log verbosity level using a numerical value (see @code{-loglevel}). +@end table + +For example, to output a report to a file named @file{ffreport.log} +using a log level of @code{32} (alias for log level @code{info}): + +@example +FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output +@end example + +Errors in parsing the environment variable are not fatal, and will not +appear in the report. + +@item -hide_banner +Suppress printing banner. + +All FFmpeg tools will normally show a copyright notice, build options +and library versions. This option can be used to suppress printing +this information. + +@item -cpuflags flags (@emph{global}) +Allows setting and clearing cpu flags. This option is intended +for testing. Do not use it unless you know what you're doing. +@example +ffmpeg -cpuflags -sse+mmx ... +ffmpeg -cpuflags mmx ... +ffmpeg -cpuflags 0 ... +@end example +Possible flags for this option are: +@table @samp +@item x86 +@table @samp +@item mmx +@item mmxext +@item sse +@item sse2 +@item sse2slow +@item sse3 +@item sse3slow +@item ssse3 +@item atom +@item sse4.1 +@item sse4.2 +@item avx +@item xop +@item fma4 +@item 3dnow +@item 3dnowext +@item cmov +@end table +@item ARM +@table @samp +@item armv5te +@item armv6 +@item armv6t2 +@item vfp +@item vfpv3 +@item neon +@end table +@item PowerPC +@table @samp +@item altivec +@end table +@item Specific Processors +@table @samp +@item pentium2 +@item pentium3 +@item pentium4 +@item k6 +@item k62 +@item athlon +@item athlonxp +@item k8 +@end table +@end table + +@item -opencl_bench +This option is used to benchmark all available OpenCL devices and print the +results. This option is only available when FFmpeg has been compiled with +@code{--enable-opencl}. + +When FFmpeg is configured with @code{--enable-opencl}, the options for the +global OpenCL context are set via @option{-opencl_options}. See the +"OpenCL Options" section in the ffmpeg-utils manual for the complete list of +supported options. Amongst others, these options include the ability to select +a specific platform and device to run the OpenCL code on. By default, FFmpeg +will run on the first device of the first platform. While the options for the +global OpenCL context provide flexibility to the user in selecting the OpenCL +device of their choice, most users would probably want to select the fastest +OpenCL device for their system. + +This option assists the selection of the most efficient configuration by +identifying the appropriate device for the user's system. The built-in +benchmark is run on all the OpenCL devices and the performance is measured for +each device. The devices in the results list are sorted based on their +performance with the fastest device listed first. The user can subsequently +invoke @command{ffmpeg} using the device deemed most appropriate via +@option{-opencl_options} to obtain the best performance for the OpenCL +accelerated code. + +Typical usage to use the fastest OpenCL device involve the following steps. + +Run the command: +@example +ffmpeg -opencl_bench +@end example +Note down the platform ID (@var{pidx}) and device ID (@var{didx}) of the first +i.e. fastest device in the list. +Select the platform and device using the command: +@example +ffmpeg -opencl_options platform_idx=@var{pidx}:device_idx=@var{didx} ... +@end example + +@item -opencl_options options (@emph{global}) +Set OpenCL environment options. This option is only available when +FFmpeg has been compiled with @code{--enable-opencl}. + +@var{options} must be a list of @var{key}=@var{value} option pairs +separated by ':'. See the ``OpenCL Options'' section in the +ffmpeg-utils manual for the list of supported options. +@end table + +@section AVOptions + +These options are provided directly by the libavformat, libavdevice and +libavcodec libraries. To see the list of available AVOptions, use the +@option{-help} option. They are separated into two categories: +@table @option +@item generic +These options can be set for any container, codec or device. Generic options +are listed under AVFormatContext options for containers/devices and under +AVCodecContext options for codecs. +@item private +These options are specific to the given container, device or codec. Private +options are listed under their corresponding containers/devices/codecs. +@end table + +For example to write an ID3v2.3 header instead of a default ID3v2.4 to +an MP3 file, use the @option{id3v2_version} private option of the MP3 +muxer: +@example +ffmpeg -i input.flac -id3v2_version 3 out.mp3 +@end example + +All codec AVOptions are per-stream, and thus a stream specifier +should be attached to them. + +Note: the @option{-nooption} syntax cannot be used for boolean +AVOptions, use @option{-option 0}/@option{-option 1}. + +Note: the old undocumented way of specifying per-stream AVOptions by +prepending v/a/s to the options name is now obsolete and will be +removed soon. |