/* $NoKeywords:$ */ /** * @file * * External Interface implementation for non-coherent features. * * Contains routines for accessing the interface to the client BIOS, * for non-coherent features. * * @xrefitem bom "File Content Label" "Release Content" * @e project: AGESA * @e sub-project: HyperTransport * @e \$Revision: 63425 $ @e \$Date: 2011-12-22 11:24:10 -0600 (Thu, 22 Dec 2011) $ * */ /* ***************************************************************************** * * Copyright 2008 - 2012 ADVANCED MICRO DEVICES, INC. All Rights Reserved. * * AMD is granting you permission to use this software (the Materials) * pursuant to the terms and conditions of your Software License Agreement * with AMD. This header does *NOT* give you permission to use the Materials * or any rights under AMD's intellectual property. Your use of any portion * of these Materials shall constitute your acceptance of those terms and * conditions. If you do not agree to the terms and conditions of the Software * License Agreement, please do not use any portion of these Materials. * * CONFIDENTIALITY: The Materials and all other information, identified as * confidential and provided to you by AMD shall be kept confidential in * accordance with the terms and conditions of the Software License Agreement. * * LIMITATION OF LIABILITY: THE MATERIALS AND ANY OTHER RELATED INFORMATION * PROVIDED TO YOU BY AMD ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED * WARRANTY OF ANY KIND, INCLUDING BUT NOT LIMITED TO WARRANTIES OF * MERCHANTABILITY, NONINFRINGEMENT, TITLE, FITNESS FOR ANY PARTICULAR PURPOSE, * OR WARRANTIES ARISING FROM CONDUCT, COURSE OF DEALING, OR USAGE OF TRADE. * IN NO EVENT SHALL AMD OR ITS LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS * INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF AMD'S NEGLIGENCE, * GROSS NEGLIGENCE, THE USE OF OR INABILITY TO USE THE MATERIALS OR ANY OTHER * RELATED INFORMATION PROVIDED TO YOU BY AMD, EVEN IF AMD HAS BEEN ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE * EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, * THE ABOVE LIMITATION MAY NOT APPLY TO YOU. * * AMD does not assume any responsibility for any errors which may appear in * the Materials or any other related information provided to you by AMD, or * result from use of the Materials or any related information. * * You agree that you will not reverse engineer or decompile the Materials. * * NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any * further information, software, technical information, know-how, or show-how * available to you. Additionally, AMD retains the right to modify the * Materials at any time, without notice, and is not obligated to provide such * modified Materials to you. * * U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials are provided with * "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is * subject to the restrictions as set forth in FAR 52.227-14 and * DFAR252.227-7013, et seq., or its successor. Use of the Materials by the * Government constitutes acknowledgement of AMD's proprietary rights in them. * * EXPORT ASSURANCE: You agree and certify that neither the Materials, nor any * direct product thereof will be exported directly or indirectly, into any * country prohibited by the United States Export Administration Act and the * regulations thereunder, without the required authorization from the U.S. * government nor will be used for any purpose prohibited by the same. * *************************************************************************** * */ /* *---------------------------------------------------------------------------- * MODULES USED * *---------------------------------------------------------------------------- */ #include "AGESA.h" #include "amdlib.h" #include "Ids.h" #include "Topology.h" #include "htFeat.h" #include "htInterface.h" #include "htInterfaceNonCoherent.h" #include "htNb.h" #include "Filecode.h" CODE_GROUP (G1_PEICC) RDATA_GROUP (G1_PEICC) #define FILECODE PROC_HT_HTINTERFACENONCOHERENT_FILECODE /*---------------------------------------------------------------------------- * DEFINITIONS AND MACROS * *---------------------------------------------------------------------------- */ #define UNUSED_ZERO_32 ((UINT32)0) /*---------------------------------------------------------------------------- * TYPEDEFS AND STRUCTURES * *---------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------- * EXPORTED FUNCTIONS * *---------------------------------------------------------------------------- */ /*---------------------------------------------------------------------------- * LOCAL FUNCTIONS * *---------------------------------------------------------------------------- */ /*----------------------------------------------------------------------------------------*/ /** * Get Manual BUID assignment list. * * @HtInterfaceMethod{::F_GET_MANUAL_BUID_SWAP_LIST} * * This routine is called every time a non-coherent chain is processed. BUID * assignment may be controlled explicitly on a non-coherent chain. Swaps controls * the BUID assignment and FinalIds provides the device to device Linking. Device * orientation can be detected automatically, or explicitly. See documentation for * more details. * * If a manual swap list is not supplied, automatic non-coherent init assigns BUIDs * starting at 1 and incrementing sequentially based on each device's unit count. * * @param[in] Node The Node on which this chain is located * @param[in] Link The Link on the host for this chain * @param[out] List supply a pointer to a list. * List is NOT valid unless routine returns TRUE. * @param[in] State the input data * * @retval TRUE use a manual list * @retval FALSE initialize the Link automatically */ BOOLEAN GetManualBuidSwapList ( IN UINT8 Node, IN UINT8 Link, OUT BUID_SWAP_LIST **List, IN STATE_DATA *State ) { MANUAL_BUID_SWAP_LIST *p; BOOLEAN result; UINT8 Socket; UINT8 PackageLink; ASSERT ((Node < MAX_NODES) && (List != NULL)); result = FALSE; Socket = State->HtInterface->GetSocketFromMap (Node, State); PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb); if (State->HtBlock->ManualBuidSwapList != NULL) { p = State->HtBlock->ManualBuidSwapList; while (p->Socket != HT_LIST_TERMINAL) { if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) && ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) { // Found a match implies TRUE, ignore the Link result = TRUE; *List = &(p->SwapList); break; } else { p++; } } } // List is not valid if Result is FALSE. return result; } /*----------------------------------------------------------------------------------------*/ /** * Override capabilities of a device. * * @HtInterfaceMethod{::F_GET_DEVICE_CAP_OVERRIDE} * * This routine is called once for every Link on every IO device. Update the width * and frequency capability if needed for this device. This is used along with * device capabilities, the limit call backs, and northbridge limits to compute the * default settings. The components of the device's PCI config address are provided, * so its settings can be consulted if need be. The input width and frequency are the * reported device capabilities. * * @param[in] HostNode The Node on which this chain is located * @param[in] HostLink The Link on the host for this chain * @param[in] Depth The Depth in the I/O chain from the Host * @param[in] PciAddress The Device's PCI config address (for callout) * @param[in] DevVenId The Device's PCI Vendor + Device ID (offset 0x00) * @param[in] Revision The Device's PCI Revision * @param[in] Link The Device's Link number (0 or 1) * @param[in,out] LinkWidthIn modify to change the Link Width In * @param[in,out] LinkWidthOut modify to change the Link Width Out * @param[in,out] FreqCap modify to change the Link's frequency capability * @param[in,out] Clumping modify to change unit id clumping capability * @param[in] State the input data and config header * */ VOID GetDeviceCapOverride ( IN UINT8 HostNode, IN UINT8 HostLink, IN UINT8 Depth, IN PCI_ADDR PciAddress, IN UINT32 DevVenId, IN UINT8 Revision, IN UINT8 Link, IN OUT UINT8 *LinkWidthIn, IN OUT UINT8 *LinkWidthOut, IN OUT UINT32 *FreqCap, IN OUT UINT32 *Clumping, IN STATE_DATA *State ) { DEVICE_CAP_OVERRIDE *p; UINT8 HostSocket; UINT8 PackageLink; DEVICE_CAP_CALLOUT_PARAMS CalloutParams; AGESA_STATUS CalloutStatus; ASSERT ((HostNode < MAX_NODES) && (Depth < 32) && ((Link == 0) || (Link == 1))); HostSocket = State->HtInterface->GetSocketFromMap (HostNode, State); PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb); if (State->HtBlock->DeviceCapOverrideList != NULL) { p = State->HtBlock->DeviceCapOverrideList; while (p->HostSocket != HT_LIST_TERMINAL) { if (((p->HostSocket == HostSocket) || (p->HostSocket == HT_LIST_MATCH_ANY)) && ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) && ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY)) && ((p->Link == Link) || (p->Link == HT_LIST_MATCH_ANY)) && // Found a potential match. Check the additional optional matches. ((p->Options.IsCheckDevVenId == 0) || (p->DevVenId == DevVenId)) && ((p->Options.IsCheckRevision == 0) || (p->Revision == Revision))) { // // Found a match. Check what override actions are desired. // Unlike the PCB limit routines, which handle the info returned, // deviceCapOverride is actually overriding the settings, so we need // to check that the field actually has an update. // The Callout is a catch all for situations the data is not up to handling. // It is expected, but not enforced, that either the data overrides are used, // or the callout is used, rather than both. // if (p->Options.IsOverrideWidthIn != 0) { *LinkWidthIn = p->LinkWidthIn; } if (p->Options.IsOverrideWidthOut != 0) { *LinkWidthOut = p->LinkWidthOut; } if (p->Options.IsOverrideFreq != 0) { *FreqCap = p->FreqCap; } if (p->Options.IsOverrideClumping != 0) { *Clumping = p->Clumping; } if (p->Options.IsDoCallout != 0) { // // Pass the actual info being matched, not the matched struct data. // This callout is expected to be built in as part of the options file, and does not use the // callout interface, even though we use the consistent interface declaration for the routine. // So, the first two int parameters have no meaning in this case. // It is not meaningful for the callout to have any status but Success. // CalloutParams.HostSocket = HostSocket; CalloutParams.HostLink = PackageLink; CalloutParams.Depth = Depth; CalloutParams.DevVenId = DevVenId; CalloutParams.Revision = Revision; CalloutParams.Link = Link; CalloutParams.PciAddress = PciAddress; CalloutParams.LinkWidthIn = LinkWidthIn; CalloutParams.LinkWidthOut = LinkWidthOut; CalloutParams.FreqCap = FreqCap; CalloutParams.Clumping = Clumping; CalloutParams.StdHeader = *((AMD_CONFIG_PARAMS *) (State->ConfigHandle)); CalloutStatus = p->Callout (UNUSED_ZERO_32, UNUSED_ZERO_32, (VOID *) &CalloutParams); ASSERT (CalloutStatus == AGESA_SUCCESS); } break; } else { p++; } } } } /*----------------------------------------------------------------------------------------*/ /** * Get limits for non-coherent Links. * * @HtInterfaceMethod{::F_GET_IO_PCB_LIMITS} * * For each non-coherent connection this routine is called once. Update the * frequency and width if needed for this Link (usually based on board restriction). * This is used with device capabilities, device overrides, and northbridge limits to * compute the default settings. The input width and frequency are valid, but do not * necessarily reflect the minimum setting that will be chosen. * * @param[in] HostNode The Node on which this Link is located * @param[in] HostLink The Link about to be initialized * @param[in] Depth The Depth in the I/O chain from the Host * @param[in,out] DownstreamLinkWidthLimit modify to change the Link Width In * @param[in,out] UpstreamLinkWidthLimit modify to change the Link Width Out * @param[in,out] PcbFreqCap modify to change the Link's frequency capability * @param[in] State the input data */ VOID GetIoPcbLimits ( IN UINT8 HostNode, IN UINT8 HostLink, IN UINT8 Depth, IN OUT UINT8 *DownstreamLinkWidthLimit, IN OUT UINT8 *UpstreamLinkWidthLimit, IN OUT UINT32 *PcbFreqCap, IN STATE_DATA *State ) { IO_PCB_LIMITS *p; UINT8 Socket; UINT8 PackageLink; ASSERT ((HostNode < MAX_NODES) && (HostLink < MAX_NODES)); Socket = State->HtInterface->GetSocketFromMap (HostNode, State); PackageLink = State->Nb->GetPackageLink (HostNode, HostLink, State->Nb); if (State->HtBlock->IoPcbLimitsList != NULL) { p = State->HtBlock->IoPcbLimitsList; while (p->HostSocket != HT_LIST_TERMINAL) { if (((p->HostSocket == Socket) || (p->HostSocket == HT_LIST_MATCH_ANY)) && ((p->HostLink == PackageLink) || (p->HostLink == HT_LIST_MATCH_ANY)) && ((p->Depth == Depth) || (p->Depth == HT_LIST_MATCH_ANY))) { // Found a match, return the override info *DownstreamLinkWidthLimit = p->DownstreamLinkWidthLimit; *UpstreamLinkWidthLimit = p->UpstreamLinkWidthLimit; *PcbFreqCap = p->PcbFreqCap; break; } else { p++; } } } } /*----------------------------------------------------------------------------------------*/ /** * Manually control bus number assignment. * * @HtInterfaceMethod{::F_GET_OVERRIDE_BUS_NUMBERS} * * This routine is called every time a non-coherent chain is processed. If a system * can not use the auto Bus numbering feature for non-coherent chain bus assignments, * this routine can provide explicit control. For each chain, provide the bus number * range to use. * * The outputs SecBus and SubBus are not valid unless this routine returns TRUE * * @param[in] Node The Node on which this chain is located * @param[in] Link The Link on the host for this chain * @param[out] SecBus Secondary Bus number for this non-coherent chain * @param[out] SubBus Subordinate Bus number * @param[in] State the input data * * @retval TRUE this routine is supplying the bus numbers. * @retval FALSE use auto Bus numbering, bus outputs not valid. */ BOOLEAN GetOverrideBusNumbers ( IN UINT8 Node, IN UINT8 Link, OUT UINT8 *SecBus, OUT UINT8 *SubBus, IN STATE_DATA *State ) { OVERRIDE_BUS_NUMBERS *p; BOOLEAN result; UINT8 Socket; UINT8 PackageLink; ASSERT ((Node < MAX_NODES) && (Link < MAX_NODES)); result = FALSE; Socket = State->HtInterface->GetSocketFromMap (Node, State); PackageLink = State->Nb->GetPackageLink (Node, Link, State->Nb); if (State->HtBlock->OverrideBusNumbersList != NULL) { p = State->HtBlock->OverrideBusNumbersList; while (p->Socket != HT_LIST_TERMINAL) { if (((p->Socket == Socket) || (p->Socket == HT_LIST_MATCH_ANY)) && ((p->Link == PackageLink) || (p->Link == HT_LIST_MATCH_ANY))) { // Found a match, return the bus overrides *SecBus = p->SecBus; *SubBus = p->SubBus; ASSERT (*SubBus > *SecBus); result = TRUE; break; } else { p++; } } } // SecBus, SubBus are not valid if Result is FALSE. return result; }