## ## This file is part of the libpayload project. ## ## Copyright (C) 2008 Advanced Micro Devices, Inc. ## Copyright (C) 2008 coresystems GmbH ## ## Redistribution and use in source and binary forms, with or without ## modification, are permitted provided that the following conditions ## are met: ## 1. Redistributions of source code must retain the above copyright ## notice, this list of conditions and the following disclaimer. ## 2. Redistributions in binary form must reproduce the above copyright ## notice, this list of conditions and the following disclaimer in the ## documentation and/or other materials provided with the distribution. ## 3. The name of the author may not be used to endorse or promote products ## derived from this software without specific prior written permission. ## ## THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ## ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ## ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE ## FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ## DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ## OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ## LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ## OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ## SUCH DAMAGE. ## mainmenu "Libpayload Configuration" menu "Generic Options" config GPL bool "GPLv2-licensed Options" default n help Prompt for options that will build code licensed under the GNU General Public License (version 2). This will subject the whole payload to the terms of this license (including its provision to release all sources, please see the LICENSE_GPL file for details). config EXPERIMENTAL bool "Experimental Options" default n help Prompt for experimental functionality. Attention: This is not likely to work without problems config OBSOLETE bool "Obsolete Options" default n help Prompt for obsolete options. These options are for old, unsupported features and are likely to go away in the future. config DEVELOPER bool "Developer Options" default n help Prompt for developer options. These options are only interesting for libpayload developers. config REMOTEGDB bool "Remote GDB stub" default n depends on GPL help Enable Remote GDB debugging support. config CHROMEOS bool "ChromeOS specific features" default n help Enable ChromeOS specific features. endmenu menu "Architecture Options" choice prompt "Target Architecture" default ARCH_X86 config ARCH_ARM bool "ARM" help Support the ARM architecture config ARCH_X86 bool "x86" help Support the x86 architecture config ARCH_ARM64 bool "ARM64" help Support the ARM64 architecture config ARCH_MIPS bool "MIPS" help Support the MIPS architecture endchoice config MEMMAP_RAM_ONLY bool "Only consider RAM entries in memory map for further processing" default n config MULTIBOOT bool "Multiboot header support" depends on ARCH_X86 default y endmenu menu "Standard Libraries" config LIBC bool "Enable C library support" default y config CURSES bool "Build a curses library" default y choice prompt "Curses implementation" default PDCURSES depends on CURSES config TINYCURSES bool "Tinycurses" help Tinycurses was the first curses implementation for libpayload. It features low memory consumption, static allocation of larger data structures (so few or no memory allocation calls) and a reduced feature set. config PDCURSES bool "PDCurses" help libpayload's PDCurses port provides a full features curses implementation, including libpanel, libmenu and libform (which are taken from ncurses). It requires more system resources, in particularily heap memory. endchoice config LAR bool "LAR support" default n depends on OBSOLETE help LAR is the archive format of (obsolete) coreboot v3 config CBFS bool "CBFS support" default y help CBFS is the archive format of coreboot config LZMA bool "LZMA decoder" default y help LZMA decoder implementation, usable eg. by CBFS, but also externally. endmenu menu "Console Options" config SKIP_CONSOLE_INIT bool "Skip initializing the consoles at startup" default n help Normally, libpayload will initialize console input/output on startup before the payload itself gets control. This option disables that behavior and leaves console initialization up to the payload. config CBMEM_CONSOLE bool "Send output to the in memory CBMEM console" default y config SERIAL_CONSOLE bool "See output on the serial port console" default y config 8250_SERIAL_CONSOLE bool "8250, 16450, 16550, 16550A compatible serial port driver" depends on SERIAL_CONSOLE default y if ARCH_X86 default n if !ARCH_X86 config S5P_SERIAL_CONSOLE bool "Exynos SOC, S5P compatible serial port driver" depends on SERIAL_CONSOLE default n config 8250_MMIO32_SERIAL_CONSOLE bool "Memory-mapped 8250-compatible serial port driver with 32-bit regs" depends on SERIAL_CONSOLE default n config IPQ806X_SERIAL_CONSOLE bool "IPQ806x SOC compatible serial port driver" depends on SERIAL_CONSOLE default n config BG4CD_SERIAL_CONSOLE bool "Serial port driver for Marvell's BG4CD" depends on SERIAL_CONSOLE default n config PL011_SERIAL_CONSOLE bool "PL011 compatible serial port driver" depends on 8250_SERIAL_CONSOLE default n config SERIAL_IOBASE ## This default is currently not used on non-x86 systems. hex "Default I/O base for the serial port (default 0x3f8)" depends on SERIAL_CONSOLE && ARCH_X86 default 0x3f8 config SERIAL_SET_SPEED bool "Override the serial console baud rate" default n depends on SERIAL_CONSOLE config SERIAL_BAUD_RATE int "Serial console baud rate (default 115200)" depends on SERIAL_SET_SPEED default 115200 config SERIAL_ACS_FALLBACK bool "Use plain ASCII characters for ACS" default n depends on SERIAL_CONSOLE help The alternate character set (ACS) is used for drawing lines and displaying a couple of other special graphics characters. The ACS characters generally look good on screen, but can be difficult to cut and paste from a terminal window to a text editor. Say 'y' here if you want to always use plain ASCII characters to approximate the appearance of ACS characters on the serial port console. config VIDEO_CONSOLE bool "See output on a video console" default y config VGA_VIDEO_CONSOLE bool "VGA video console driver" depends on ARCH_X86 && VIDEO_CONSOLE default y config GEODELX_VIDEO_CONSOLE bool "Geode LX video console driver" depends on ARCH_X86 && VIDEO_CONSOLE default n config COREBOOT_VIDEO_CONSOLE bool "coreboot video console driver" depends on VIDEO_CONSOLE && !GEODELX_VIDEO_CONSOLE default n help Say Y here if coreboot switched to a graphics mode and your payload wants to use it. config PC_KEYBOARD bool "Allow input from a PC keyboard" default y if ARCH_X86 # uses IO default n config PC_KEYBOARD_LAYOUT_US bool "English (US) keyboard layout" depends on PC_KEYBOARD default y config PC_KEYBOARD_LAYOUT_DE bool "German keyboard layout" depends on PC_KEYBOARD default n endmenu menu "Drivers" config PCI bool "Support for PCI devices" depends on ARCH_X86 # for now default y config NVRAM bool "Support for reading/writing NVRAM bytes" depends on ARCH_X86 # for now default y config RTC_PORT_EXTENDED_VIA bool "Extended RTC ports are 0x74/0x75" default n help For recent chipsets with 256 NVRAM bytes, you have to access the upper 128 bytes (128-255) using two different I/O ports, usually 0x72/0x73. On some chipsets this can be a different set of ports, though. The VIA VT8237R for example only recognizes the ports 0x74/0x75 for accessing the high 128 NVRAM bytes (as seems to be the case for multiple VIA chipsets). If you want to read or write CMOS bytes on computers with one of these chipsets, say 'y' here. config SPEAKER bool "Support for PC speaker" depends on ARCH_X86 default y config STORAGE bool "Support for storage devices" default y help Select this option if you want support for storage devices (like hard drives, memory sticks or optical drives). config STORAGE_64BIT_LBA bool "Use 64-bit integers to address sectors" depends on STORAGE default n help If this is selected, sectors will be addressed by an 64-bit integer. Select this to support LBA-48 for ATA drives. config STORAGE_ATA bool "Support ATA drives (i.e. hard drives)" depends on STORAGE default y help Select this option if you want support for ATA storage devices (i.e. hard drives). config STORAGE_ATAPI bool "Support ATAPI drives (i.e. optical drives)" depends on STORAGE default y select STORAGE_ATA help Select this option if you want support for ATAPI storage devices (i.e. optical drives like CD or DVD drives). config STORAGE_AHCI bool "Support for AHCI host controllers" depends on STORAGE && (STORAGE_ATA || STORAGE_ATAPI) && PCI default y help Select this option if you want support for SATA controllers in AHCI mode. config STORAGE_AHCI_ONLY_TESTED bool "Only enable tested controllers" depends on STORAGE_AHCI default y help If this option is selected only AHCI controllers which are known to work will be used. config TIMER_RDTSC bool default y depends on ARCH_X86 choice prompt "Timer driver" default TIMER_NONE depends on !ARCH_X86 config TIMER_NONE bool "None" help The timer driver is provided by the payload itself. config TIMER_MCT bool "Exynos MCT" config TIMER_TEGRA_1US bool "Tegra 1us" config TIMER_IPQ806X bool "Timer for ipq806x platforms" config TIMER_RK bool "Timer for Rockchip" config TIMER_BG4CD bool "Marvell BG4CD" config TIMER_CYGNUS bool "Timer for Cygnus" config TIMER_IMG_PISTACHIO bool "Timer for IMG Pistachio" config TIMER_MTK bool "Timer for MediaTek MT8173" endchoice config TIMER_MCT_HZ int "Exynos MCT frequency" depends on TIMER_MCT default 24000000 config TIMER_MCT_ADDRESS hex "Exynos MCT base address" depends on TIMER_MCT default 0x101c0000 config TIMER_RK_ADDRESS hex "Rockchip timer base address" depends on TIMER_RK default 0xff810020 config TIMER_TEGRA_1US_ADDRESS hex "Tegra u1s timer base address" depends on TIMER_TEGRA_1US default 0x60005010 config IPQ806X_TIMER_FREQ int "Hardware timer frequency" default 32000 depends on TIMER_IPQ806X help IPQ hardware presently provides a single timer running at 32KHz, a finer granulariry timer is available but is not yet enabled. config IPQ806X_TIMER_REG hex "Timer register address" default 0x0200A008 depends on TIMER_IPQ806X help Address of the register to read a free running timer value. config IPROC_PERIPH_GLB_TIM_REG_BASE hex "Cygnus timer base address" depends on TIMER_CYGNUS default 0x19020200 config TIMER_MTK_HZ int "MediaTek GPT frequency" depends on TIMER_MTK default 13000000 help Clock frequency of MediaTek General Purpose Timer. config TIMER_MTK_ADDRESS hex "MTK GPT register address" depends on TIMER_MTK default 0x10008048 help Address of GPT4's counter register to read the FREERUN-mode timer value. config USB bool "USB Support" default n config USB_UHCI bool "Support for USB UHCI controllers" depends on USB && ARCH_X86 help Select this option if you are going to use USB 1.1 on an Intel based system. config USB_OHCI bool "Support for USB OHCI controllers" depends on USB help Select this option if you are going to use USB 1.1 on a non-Intel based system. config USB_EHCI bool "Support for USB EHCI controllers" depends on USB help Select this option if you want to use USB 2.0 config USB_XHCI bool "Support for USB xHCI controllers" depends on USB help Select this option if you want to use USB 3.0 NOTE: This option is not (fully) implemented yet config USB_DWC2 bool "Support for USB DesignWare HCD controllers" depends on USB && !USB_HID help Select this option if you want to use DesignWare USB 2.0 host controller config USB_HID bool "Support for USB keyboards" depends on USB default y help Select this option if you want to use devices complying to the USB HID (Human Interface Device) standard. Such devices are for example keyboards and mice. Currently only keyboards are supported. Say Y here unless you know exactly what you are doing. config USB_HUB bool "Support for USB hubs" depends on USB default y help Select this option if you want to compile in support for USB hubs. Say Y here unless you know exactly what you are doing. config USB_EHCI_HOSTPC_ROOT_HUB_TT bool "Support for USB EHCI ROOT HUB that has TT" depends on USB_EHCI default n help Select this option if USB EHCI root hub supports TT (Transaction Translator). To support this TT feature we read port-speed from non-standard register HOSTPC (offset 84h of Operational Register base). config USB_MSC bool "Support for USB storage" depends on USB default y help Select this option if you want to compile in support for USB mass storage devices (USB memory sticks, hard drives, CDROM/DVD drives) Say Y here unless you know exactly what you are doing. config USB_GEN_HUB bool default n if (!USB_HUB && !USB_XHCI) default y if (USB_HUB || USB_XHCI) config USB_PCI bool "Auto-scan PCI bus for USB host controllers" depends on USB default y if ARCH_X86 default n config UDC bool "USB device mode support" default n help Select this option to add support for running as a USB device. config UDC_CI bool "ChipIdea driver for USB device mode" depends on UDC default n help Select this option to add the driver for ChipIdea USB device controller. endmenu menu "Debugging" depends on DEVELOPER config DEBUG_MALLOC bool "Debug memory allocator" depends on USB default n help Select this option if you want to debug the memory allocator. This option logs all uses of the following functions: void free(void *ptr); void *malloc(size_t size); void *calloc(size_t nmemb, size_t size); void *realloc(void *ptr, size_t size); void *memalign(size_t align, size_t size); Say N here unless you are debugging memory allocator problems. endmenu config BIG_ENDIAN default n bool config LITTLE_ENDIAN default n bool # Whether the target system has an IO address space. config IO_ADDRESS_SPACE default n bool source "arch/Config.in"