From 96446239346128308a9f8500c4018aae579a876d Mon Sep 17 00:00:00 2001 From: Nils Jacobs Date: Mon, 1 Nov 2010 14:39:49 +0000 Subject: Remove some unused code. Signed-off-by: Nils Jacobs Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/northbridge/amd/gx2/pll_reset.c | 173 +----------------------------------- 1 file changed, 2 insertions(+), 171 deletions(-) diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c index 19b0946..f9e780c 100644 --- a/src/northbridge/amd/gx2/pll_reset.c +++ b/src/northbridge/amd/gx2/pll_reset.c @@ -24,69 +24,6 @@ #define CALIBRATE_INTERVAL ((20*CLOCK_TICK_RATE)/1000) /* 20ms */ #define CALIBRATE_DIVISOR (20*1000) /* 20ms / 20000 == 1usec */ -#if 0 -static unsigned int calibrate_tsc(void) -{ - /* Set the Gate high, disable speaker */ - outb((inb(0x61) & ~0x02) | 0x01, 0x61); - - /* - * Now let's take care of CTC channel 2 - * - * Set the Gate high, program CTC channel 2 for mode 0, - * (interrupt on terminal count mode), binary count, - * load 5 * LATCH count, (LSB and MSB) to begin countdown. - */ - outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */ - outb(CALIBRATE_INTERVAL & 0xff, 0x42); /* LSB of count */ - outb(CALIBRATE_INTERVAL >> 8, 0x42); /* MSB of count */ - - { - tsc_t start; - tsc_t end; - unsigned long count; - - start = rdtsc(); - count = 0; - do { - count++; - } while ((inb(0x61) & 0x20) == 0); - end = rdtsc(); - - /* Error: ECTCNEVERSET */ - if (count <= 1) - goto bad_ctc; - - /* 64-bit subtract - gcc just messes up with long longs */ - __asm__("subl %2,%0\n\t" - "sbbl %3,%1" - :"=a" (end.lo), "=d" (end.hi) - :"g" (start.lo), "g" (start.hi), - "0" (end.lo), "1" (end.hi)); - - /* Error: ECPUTOOFAST */ - if (end.hi) - goto bad_ctc; - - - /* Error: ECPUTOOSLOW */ - if (end.lo <= CALIBRATE_DIVISOR) - goto bad_ctc; - - return (end.lo + CALIBRATE_DIVISOR -1)/CALIBRATE_DIVISOR; - } - - /* - * The CTC wasn't reliable: we got a hit on the very first read, - * or the CPU was so fast/slow that the quotient wouldn't fit in - * 32 bits.. - */ -bad_ctc: - print_err("bad_ctc\n"); - return 0; -} -#endif - /* spll_raw_clk = SYSREF * FbDIV, * GLIU Clock = spll_raw_clk / MDIV * CPU Clock = spll_raw_clk / VDIV @@ -108,17 +45,6 @@ static const unsigned char fbdiv2plldiv[] = { 49, 40, 19, 59, 32, 54, 35, 0, 41, 60, 55, 0, 61, 0, 0, 0 }; -static const unsigned char pci33_ddr_crt [] = { - /* FbDIV, VDIV, MDIV CPU/GeodeLink */ - 12, 2, 3, // 200/133 - 16, 2, 3, // 266/177 - 18, 2, 3, // 300/200 - 20, 2, 3, // 333/222 - 22, 2, 3, // 366/244 - 24, 2, 3, // 400/266 - 26, 2, 3 // 433/289 -}; - /* FbDIV VDIV MDIV CPU/GeodeLink */ /* 12 2 3 200/133 */ /* 16 2 3 266/177 */ @@ -128,31 +54,12 @@ static const unsigned char pci33_ddr_crt [] = { /* 24 2 3 400/266 */ /* 26 2 3 433/289 */ -#if 0 -static unsigned int get_memory_speed(void) -{ - unsigned char val, hi, lo; - - val = spd_read_byte(0xA0, 9); - hi = (val >> 4) & 0x0f; - lo = val & 0x0f; - - return 20000/(hi*10 + lo); -} -#endif - -#define USE_GOODRICH_VERSION 1 - -#if USE_GOODRICH_VERSION -/////////////////////////////////////////////////////////////////////////////// -// Goodrich Version of pll_reset - /* PLLCHECK_COMPLETED is the "we've already done this" flag */ #define PLLCHECK_COMPLETED (1 << RSTPLL_LOWER_SWFLAGS_SHIFT) #ifndef RSTPPL_LOWER_BYPASS_SET #define RSTPPL_LOWER_BYPASS_SET (1 << GLCP_SYS_RSTPLL_BYPASS) -#endif /* RSTPPL_LOWER_BYPASS_SET */ +#endif // RSTPPL_LOWER_BYPASS_SET #define DEFAULT_MDIV 3 #define DEFAULT_VDIV 2 @@ -218,7 +125,7 @@ static void pll_reset(void) /* CheckSemiSync proc */ /* Check for Semi-Sync in GeodeLink and CPU. */ /* We need to do this here since the strap settings don't account for these bits. */ - SyncBits = 0; // store the sync bits in up ebx + SyncBits = 0; /* store the sync bits in up ebx */ /* Check for Bypass mode. */ if (msrGlcpSysRstpll.lo & RSTPPL_LOWER_BYPASS_SET) @@ -247,7 +154,6 @@ static void pll_reset(void) } } - /* SetSync: */ msrGlcpSysRstpll.lo &= ~(RSTPPL_LOWER_PCI_SEMI_SYNC_SET | RSTPPL_LOWER_CPU_SEMI_SYNC_SET); msrGlcpSysRstpll.lo |= SyncBits; @@ -273,78 +179,3 @@ static void pll_reset(void) } /* we haven't configured the PLL; do it now */ } -// End of Goodrich version of pll_reset -/////////////////////////////////////////////////////////////////////////////// - -#else // #if USE_GOODRICH_VERSION - -static void pll_reset(void) -{ - msr_t msr; - unsigned int sysref, spll_raw, cpu_core, gliu; - unsigned mdiv, vdiv, fbdiv; - - /* get CPU core clock in MHZ */ - cpu_core = calibrate_tsc(); - print_debug("Cpu core is "); - print_debug_hex32(cpu_core); - print_debug("\n"); - - msr = rdmsr(GLCP_SYS_RSTPLL); - if (msr.lo & (1 << GLCP_SYS_RSTPLL_BYPASS)) { -#if 0 - print_debug("MSR "); - print_debug_hex32(GLCP_SYS_RSTPLL); - print_debug("is "); - print_debug_hex32(msr.hi); - print_debug(":"); - print_debug_hex32(msr.lo); - - msr.hi = PLLMSRhi; - msr.lo = PLLMSRlo; - wrmsr(GLCP_SYS_RSTPLL, msr); - msr.lo |= PLLMSRlo1; - wrmsr(GLCP_SYS_RSTPLL, msr); - - print_debug("Reset PLL\n"); - - msr.lo |= PLLMSRlo2; - wrmsr(GLCP_SYS_RSTPLL,msr); - print_debug("should not be here\n"); -#endif - print_err("shit"); - while (1) - ; - } - - if (msr.lo & GLCP_SYS_RSTPLL_SWFLAGS_MASK) { - /* PLL is already set and we are reboot from PLL reset */ - print_debug("reboot from BIOS reset\n"); - return; - } - - /* get the sysref clock rate */ - vdiv = (msr.hi >> GLCP_SYS_RSTPLL_VDIV_SHIFT) & 0x07; - vdiv += 2; - fbdiv = (msr.hi >> GLCP_SYS_RSTPLL_FBDIV_SHIFT) & 0x3f; - fbdiv = fbdiv2plldiv[fbdiv]; - spll_raw = cpu_core * vdiv; - sysref = spll_raw / fbdiv; - - /* get target memory rate by SPD */ - //gliu = get_memory_speed(); - - msr.hi = 0x00000019; - msr.lo = 0x06de0378; - wrmsr(0x4c000014, msr); - msr.lo |= ((0xde << 16) | (1 << 26) | (1 << 24)); - wrmsr(0x4c000014, msr); - - print_debug("Reset PLL\n"); - - msr.lo |= ((1<<14) |(1<<13) | (1<<0)); - wrmsr(0x4c000014,msr); - - print_debug("should not be here\n"); -} -#endif // #if USE_GOODRICH_VERSION -- cgit v1.1