From 15bdeaa68391dcbcafc55d76ed4c85d058c81a5b Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 15 Feb 2008 13:27:45 +0000 Subject: README.hardware: Add mx31lite documentation git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3816 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- README.hardware | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'README.hardware') diff --git a/README.hardware b/README.hardware index e800118..a1417eb 100644 --- a/README.hardware +++ b/README.hardware @@ -24,7 +24,7 @@ The following boards are supported by Poky: * Compulab EM-X270 (em-x270) * FreeScale iMX31ADS (mx31ads) * Marvell PXA3xx Zylonite (zylonite) - * Logic iMX31 Lite Kit (mx31lite) + * Logic iMX31 Lite Kit (mx31litekit) * Phytec phyCORE-iMX31 (mx31phy) For more information see board's section below. The Poky MACHINE setting @@ -193,10 +193,18 @@ To boot the board: blob> boot -Logic iMX31 Lite Kit (mx31lite) +Logic iMX31 Lite Kit (mx31litekit) =============================== -FIXME +The easiest method to boot this board is to take an MMC/SD card and format +the first partition as ext2, then extract the poky image onto this as root. +Assuming the board is network connected, a TFTP server is available at +192.168.1.33 and a serial terminal is available (115200 8N1), the following +commands will boot a kernel called "mx31kern" from the TFTP server: + + losh> ifconfig sm0 192.168.1.203 255.255.255.0 192.168.1.33 + losh> load raw 0x80100000 0x200000 /tftp/192.168.1.33:mx31kern + losh> exec 0x80100000 - Phytec phyCORE-iMX31 (mx31phy) -- cgit v1.1