documentation/adt-manual: changes for Jessica's review.

I made several changes based on feedback from Jessica Zhang.

1. Removed "SDKVERSION" as a way of identifying the directory in
   which a toolchain tarball is installed.  I replaced with "1.1"

2. Cleaned up the bitbake command verbage to consistently use
   'bitbake' command.

3. Cleaned up an erroneous reference to the toolchain environment
   setup scripts.  I was referring the user to the oe-init-build-env
   area.

4. Changed wording to indicate that the toolchain tarball is generated
   after running bitbake rather than installing the toolchain.

5. Replaced the gmae tarball file used in an example to be the
   regular taball.

(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

2 files changed, 15 insertions, 17 deletions

diff --git a/documentation/adt-manual/adt-eclipse.xml b/documentation/adt-manual/adt-eclipse.xml
index 8272bae..df70bd4 100644
--- a/documentation/adt-manual/adt-eclipse.xml
+++ b/documentation/adt-manual/adt-eclipse.xml
@@ -294,7 +294,7 @@
                         </para></listitem>
                     <listitem><para><emphasis>Point to the Toolchain:</emphasis>
                         If you are using a stand-alone pre-built toolchain, you should be pointing to the
-                        <filename>/opt/poky/$SDKVERSION</filename> directory.
+                        <filename>/opt/poky/1.1</filename> directory.
                         This is the location for toolchains installed by the ADT Installer or by hand.
                         Sections "<link linkend='configuring-and-running-the-adt-installer-script'>Configuring 
                         and Running the ADT Installer Script</link>" and 
diff --git a/documentation/adt-manual/adt-prepare.xml b/documentation/adt-manual/adt-prepare.xml
index a9fb15e..8c98498 100644
--- a/documentation/adt-manual/adt-prepare.xml
+++ b/documentation/adt-manual/adt-prepare.xml
@@ -181,7 +181,7 @@
             <para>
                 Once the installation completes, the ADT, which includes the cross-toolchain, is installed.
                 You will notice environment setup files for the cross-toolchain in 
-                <filename>/opt/poky/$SDKVERSION</filename>,
+                <filename>/opt/poky/1.1</filename>,
                 and image tarballs in the <filename>adt-installer</filename>
                 directory according to your installer configurations, and the target sysroot located
                 according to the <filename>YOCTOADT_TARGET_SYSROOT_LOC_&lt;arch&gt;</filename> variable
@@ -204,7 +204,7 @@
             Follow these steps:
             <orderedlist>
                 <listitem><para>Go to  
-                    <ulink url='http://autobuilder.yoctoproject.org/downloads/yocto-1.1/toolchain'></ulink> 
+                    <ulink url='http://www.yoctoproject.org/downloads/yocto-1.1/toolchain'></ulink> 
                     and find the folder that matches your host development system 
                     (i.e. <filename>i586</filename> for 32-bit machines or 
                     <filename>x86_64</filename> for 64-bit machines).</para></listitem>
@@ -214,10 +214,8 @@
                     you are going to use your cross-toolchain for an Intel-based 32-bit target, go into the 
                     <filename>x86_64</filename> folder and download the following tarball:
                     <literallayout class='monospaced'>
-     yocto-eglibc-x86_64-i586-toolchain-gmae-1.1.tar.bz2
-                   </literallayout>
-                   The cross-toolchain tarballs provided by the Yocto Project support development
-                   of GNOME platforms on mobile devices (GMAE).
+     yocto-eglibc-x86_64-i586-toolchain-1.1.tar.bz2
+                    </literallayout>
                     <note><para>As an alternative to steps one and two, you can build the toolchain tarball 
                         if you have a Yocto Project build tree.
                         If you need GMAE, you should use the <filename>bitbake meta-toolchain-gmae</filename>
@@ -233,7 +231,7 @@
                         </para></note></para></listitem>
                 <listitem><para>Make sure you are in the root directory with root privileges and then expand 
                     the tarball.  
-                    The tarball expands into <filename>/opt/poky/$SDKVERSION</filename>.
+                    The tarball expands into <filename>/opt/poky/1.1</filename>.
                     Once the tarball is expanded, the cross-toolchain is installed.
                     You will notice environment setup files for the cross-toolchain in the directory.
                     </para></listitem>
@@ -260,8 +258,8 @@
                     files.</para></listitem> 
                 <listitem><para>At this point, you should be sure that the 
                     <filename>MACHINE</filename> variable 
-                    in the <filename>local.conf</filename> file found in the Yocto Project 
-                    file structure's <filename>conf</filename> directory 
+                    in the <filename>local.conf</filename> file found in the 
+                    <filename>conf</filename> directory of the Yocto Project build directory
                     is set for the target architecture.
                     Comments within the <filename>local.conf</filename> file list the values you 
                     can use for the <filename>MACHINE</filename> variable.  
@@ -274,12 +272,12 @@
                     cross-toolchain installation.
                     <note>If change out of your working directory after you 
                         <filename>source</filename> the environment setup script and before you run
-                        the BitBake command, the command might not work. 
+                        the <filename>bitbake</filename> command, the command might not work. 
                         Be sure to run the <filename>bitbake</filename> command immediately 
                         after checking or editing the <filename>local.conf</filename> but without 
                         changing out of your working directory.</note>
-                    Once BitBake finishes, the cross-toolchain is installed within the Yocto Project
-                    build tree.
+                    Once the <filename>bitbake</filename> command finishes, 
+                    the tarball for the cross-toolchain is generated within the Yocto Project build tree.
                     You will notice environment setup files for the cross-toolchain in the 
                     Yocto Project build tree in the <filename>tmp</filename> directory.
                     Setup script filenames contain the strings <filename>environment-setup</filename>.
@@ -294,12 +292,12 @@
 
     <para>
         Before you can develop using the cross-toolchain, you need to set up the 
-        cross-development environment by sourcing the environment setup script.  
+        cross-development environment by sourcing the toolchain's environment setup script.  
         If you used the ADT Installer or used an existing ADT tarball to install the ADT,
-        then you can find this script in the <filename>/opt/poky/$SDKVERSION</filename>
+        then you can find this script in the <filename>/opt/poky/1.1</filename>
         directory.  
         If you installed the toolchain in the build tree, you can find the environment setup 
-        scripts in the Yocto Project build tree's <filename>tmp</filename> directory.
+        script for the toolchain in the Yocto Project build tree's <filename>tmp</filename> directory.
     </para>
 
     <para> 
@@ -307,7 +305,7 @@
         which you are developing.  
         Environment setup scripts begin with the string “<filename>environment-setup</filename>”
         and include as part of their name the architecture.  
-        For example, the environment setup script for a 64-bit IA-based architecture would 
+        For example, the toolchain environment setup script for a 64-bit IA-based architecture would 
         be the following: 
         <literallayout class='monospaced'>
      /opt/poky/1.1/environment-setup-x86_64-poky-linux