diff options
Diffstat (limited to 'board/LaCie/edminiv2/edminiv2.c')
| -rw-r--r-- | board/LaCie/edminiv2/edminiv2.c | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c new file mode 100644 index 0000000..4a9b308 --- /dev/null +++ b/board/LaCie/edminiv2/edminiv2.c @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/orion5x.h> +#include "../common/common.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH + * which CFI does not properly detect, hence the LEGACY config. + */ +#if defined(CONFIG_FLASH_CFI_LEGACY) +#include <flash.h> +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + int sectsz[] = CONFIG_SYS_FLASH_SECTSZ; + int sect; + + if (base != CONFIG_SYS_FLASH_BASE) + return 0; + + info->size = 0; + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; + /* set each sector's start address and size based */ + for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) { + info->start[sect] = base+info->size; + info->size += sectsz[sect]; + } + /* This flash must be accessed in 8-bits mode, no buffer. */ + info->flash_id = 0x01000000; + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->buffer_size = 0; + /* timings are derived from the Macronix datasheet. */ + info->erase_blk_tout = 1000; + info->write_tout = 10; + info->buffer_write_tout = 300; + /* Commands and addresses are for AMD mode 8-bit access. */ + info->vendor = CFI_CMDSET_AMD_LEGACY; + info->cmd_reset = 0xF0; + info->interface = FLASH_CFI_X8; + info->legacy_unlock = 0; + info->ext_addr = 0; + info->addr_unlock1 = 0x00000aaa; + info->addr_unlock2 = 0x00000555; + /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */ + info->manufacturer_id = 0x22; + info->device_id = 0xBA; + info->device_id2 = 0; + info->cfi_version = 0x3133; + info->cfi_offset = 0x0000; + info->name = "MX29LV400CB"; + + return 1; +} +#endif /* CONFIG_SYS_FLASH_CFI */ + +int board_init(void) +{ + /* arch number of board */ + gd->bd->bi_arch_number = MACH_TYPE_EDMINI_V2; + + /* boot parameter start at 256th byte of RAM base */ + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + + return 0; +} + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +/* Configure and enable MV88E1116 PHY */ +void reset_phy(void) +{ + mv_phy_88e1116_init("egiga0", 8); +} +#endif /* CONFIG_RESET_PHY_R */ |
