summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/lib/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/lib/board.c')
-rw-r--r--arch/powerpc/lib/board.c1041
1 files changed, 1041 insertions, 0 deletions
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
new file mode 100644
index 0000000..fc4c1d5
--- /dev/null
+++ b/arch/powerpc/lib/board.c
@@ -0,0 +1,1041 @@
+/*
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <malloc.h>
+#include <stdio_dev.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#ifdef CONFIG_5xx
+#include <mpc5xx.h>
+#endif
+#ifdef CONFIG_MPC5xxx
+#include <mpc5xxx.h>
+#endif
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+#endif
+#if defined(CONFIG_CMD_SCSI)
+#include <scsi.h>
+#endif
+#if defined(CONFIG_CMD_KGDB)
+#include <kgdb.h>
+#endif
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
+#include <net.h>
+#ifdef CONFIG_GENERIC_MMC
+#include <mmc.h>
+#endif
+#include <serial.h>
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+#if !defined(CONFIG_CPM2)
+#include <commproc.h>
+#endif
+#endif
+#include <version.h>
+#if defined(CONFIG_BAB7xx)
+#include <w83c553f.h>
+#endif
+#include <dtt.h>
+#if defined(CONFIG_POST)
+#include <post.h>
+#endif
+#if defined(CONFIG_LOGBUFFER)
+#include <logbuff.h>
+#endif
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+#include <asm/cache.h>
+#endif
+#ifdef CONFIG_PS2KBD
+#include <keyboard.h>
+#endif
+
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+
+#ifdef CONFIG_MP
+#include <asm/mp.h>
+#endif
+
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
+
+#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
+extern int update_flash_size(int flash_size);
+#endif
+
+#if defined(CONFIG_SC3)
+extern void sc3_read_eeprom(void);
+#endif
+
+#if defined(CONFIG_CMD_DOC)
+void doc_init(void);
+#endif
+#if defined(CONFIG_HARD_I2C) || \
+ defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+#include <spi.h>
+#include <nand.h>
+
+static char *failed = "*** failed ***\n";
+
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
+extern flash_info_t flash_info[];
+#endif
+
+#if defined(CONFIG_START_IDE)
+extern int board_start_ide(void);
+#endif
+#include <environment.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
+#define CONFIG_SYS_MEM_TOP_HIDE 0
+#endif
+
+extern ulong __init_end;
+extern ulong __bss_end;
+ulong monitor_flash_len;
+
+#if defined(CONFIG_CMD_BEDBUG)
+#include <bedbug/type.h>
+#endif
+
+/*
+ * Utilities
+ */
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t)(void);
+
+/*
+ * Init Utilities
+ *
+ * Some of this code should be moved into the core functions,
+ * but let's get it working (again) first...
+ */
+
+static int init_baudrate(void)
+{
+ gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+ return 0;
+}
+
+/***********************************************************************/
+
+static void __board_add_ram_info(int use_default)
+{
+ /* please define platform specific board_add_ram_info() */
+}
+
+void board_add_ram_info(int)
+ __attribute__ ((weak, alias("__board_add_ram_info")));
+
+static int __board_flash_wp_on(void)
+{
+ /*
+ * Most flashes can't be detected when write protection is enabled,
+ * so provide a way to let U-Boot gracefully ignore write protected
+ * devices.
+ */
+ return 0;
+}
+
+int board_flash_wp_on(void)
+ __attribute__ ((weak, alias("__board_flash_wp_on")));
+
+static void __cpu_secondary_init_r(void)
+{
+}
+
+void cpu_secondary_init_r(void)
+ __attribute__ ((weak, alias("__cpu_secondary_init_r")));
+
+static int init_func_ram(void)
+{
+#ifdef CONFIG_BOARD_TYPES
+ int board_type = gd->board_type;
+#else
+ int board_type = 0; /* use dummy arg */
+#endif
+ puts("DRAM: ");
+
+ gd->ram_size = initdram(board_type);
+
+ if (gd->ram_size > 0) {
+ print_size(gd->ram_size, "");
+ board_add_ram_info(0);
+ putc('\n');
+ return 0;
+ }
+ puts(failed);
+ return 1;
+}
+
+/***********************************************************************/
+
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c(void)
+{
+ puts("I2C: ");
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ puts("ready\n");
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_HARD_SPI)
+static int init_func_spi(void)
+{
+ puts("SPI: ");
+ spi_init();
+ puts("ready\n");
+ return 0;
+}
+#endif
+
+/***********************************************************************/
+
+#if defined(CONFIG_WATCHDOG)
+int init_func_watchdog_init(void)
+{
+ puts(" Watchdog enabled\n");
+ WATCHDOG_RESET();
+ return 0;
+}
+
+int init_func_watchdog_reset(void)
+{
+ WATCHDOG_RESET();
+ return 0;
+}
+#endif /* CONFIG_WATCHDOG */
+
+/*
+ * Initialization sequence
+ */
+
+static init_fnc_t *init_sequence[] = {
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ probecpu,
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+ board_early_init_f,
+#endif
+#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
+ get_clocks, /* get CPU and bus clocks (etc.) */
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+ && !defined(CONFIG_TQM885D)
+ adjust_sdram_tbs_8xx,
+#endif
+ init_timebase,
+#endif
+#ifdef CONFIG_SYS_ALLOC_DPRAM
+#if !defined(CONFIG_CPM2)
+ dpram_init,
+#endif
+#endif
+#if defined(CONFIG_BOARD_POSTCLK_INIT)
+ board_postclk_init,
+#endif
+ env_init,
+#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
+ /* get CPU and bus clocks according to the environment variable */
+ get_clocks_866,
+ /* adjust sdram refresh rate according to the new clock */
+ sdram_adjust_866,
+ init_timebase,
+#endif
+ init_baudrate,
+ serial_init,
+ console_init_f,
+ display_options,
+#if defined(CONFIG_8260)
+ prt_8260_rsr,
+ prt_8260_clks,
+#endif /* CONFIG_8260 */
+#if defined(CONFIG_MPC83xx)
+ prt_83xx_rsr,
+#endif
+ checkcpu,
+#if defined(CONFIG_MPC5xxx)
+ prt_mpc5xxx_clks,
+#endif /* CONFIG_MPC5xxx */
+ checkboard,
+ INIT_FUNC_WATCHDOG_INIT
+#if defined(CONFIG_MISC_INIT_F)
+ misc_init_f,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ init_func_i2c,
+#endif
+#if defined(CONFIG_HARD_SPI)
+ init_func_spi,
+#endif
+#ifdef CONFIG_POST
+ post_init_f,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+ init_func_ram,
+#if defined(CONFIG_SYS_DRAM_TEST)
+ testdram,
+#endif /* CONFIG_SYS_DRAM_TEST */
+ INIT_FUNC_WATCHDOG_RESET
+ NULL, /* Terminate this list */
+};
+
+ulong get_effective_memsize(void)
+{
+#ifndef CONFIG_VERY_BIG_RAM
+ return gd->ram_size;
+#else
+ /* limit stack to what we can reasonable map */
+ return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size);
+#endif
+}
+
+static int __fixup_cpu(void)
+{
+ return 0;
+}
+
+int fixup_cpu(void) __attribute__((weak, alias("__fixup_cpu")));
+
+/*
+ * This is the first part of the initialization sequence that is
+ * implemented in C, but still running from ROM.
+ *
+ * The main purpose is to provide a (serial) console interface as
+ * soon as possible (so we can see any error messages), and to
+ * initialize the RAM so that we can relocate the monitor code to
+ * RAM.
+ *
+ * Be aware of the restrictions: global data is read-only, BSS is not
+ * initialized, and stack space is limited to a few kB.
+ */
+
+#ifdef CONFIG_LOGBUFFER
+unsigned long logbuffer_base(void)
+{
+ return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
+}
+#endif
+
+void board_init_f(ulong bootflag)
+{
+ bd_t *bd;
+ ulong len, addr, addr_sp;
+ ulong *s;
+ gd_t *id;
+ init_fnc_t **init_fnc_ptr;
+
+#ifdef CONFIG_PRAM
+ ulong reg;
+#endif
+
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+ /* compiler optimization barrier needed for GCC >= 3.4 */
+ __asm__ __volatile__("":::"memory");
+
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
+ !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
+ !defined(CONFIG_MPC86xx)
+ /* Clear initial global data */
+ memset((void *) gd, 0, sizeof(gd_t));
+#endif
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr)
+ if ((*init_fnc_ptr) () != 0)
+ hang();
+
+#ifdef CONFIG_POST
+ post_bootmode_init();
+ post_run(NULL, POST_ROM | post_bootmode_get(NULL));
+#endif
+
+ WATCHDOG_RESET();
+
+ /*
+ * Now that we have DRAM mapped and working, we can
+ * relocate the code and continue running from DRAM.
+ *
+ * Reserve memory at end of RAM for (top down in that order):
+ * - area that won't get touched by U-Boot and Linux (optional)
+ * - kernel log buffer
+ * - protected RAM
+ * - LCD framebuffer
+ * - monitor code
+ * - board info struct
+ */
+ len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE;
+
+ /*
+ * Subtract specified amount of memory to hide so that it won't
+ * get "touched" at all by U-Boot. By fixing up gd->ram_size
+ * the Linux kernel should now get passed the now "corrected"
+ * memory size and won't touch it either. This should work
+ * for arch/ppc and arch/powerpc. Only Linux board ports in
+ * arch/powerpc with bootwrapper support, that recalculate the
+ * memory size from the SDRAM controller setup will have to
+ * get fixed.
+ */
+ gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+
+ addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+ /*
+ * We need to make sure the location we intend to put secondary core
+ * boot code is reserved and not used by any part of u-boot
+ */
+ if (addr > determine_mp_bootpg(NULL)) {
+ addr = determine_mp_bootpg(NULL);
+ debug("Reserving MP boot page to %08lx\n", addr);
+ }
+#endif
+
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+ /* reserve kernel log buffer */
+ addr -= (LOGBUFF_RESERVE);
+ debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+ addr);
+#endif
+#endif
+
+#ifdef CONFIG_PRAM
+ /*
+ * reserve protected RAM
+ */
+ reg = getenv_ulong("pram", 10, CONFIG_PRAM);
+ addr -= (reg << 10); /* size is in kB */
+ debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
+#endif /* CONFIG_PRAM */
+
+ /* round down to next 4 kB limit */
+ addr &= ~(4096 - 1);
+ debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
+#ifdef CONFIG_LCD
+#ifdef CONFIG_FB_ADDR
+ gd->fb_base = CONFIG_FB_ADDR;
+#else
+ /* reserve memory for LCD display (always full pages) */
+ addr = lcd_setmem(addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_FB_ADDR */
+#endif /* CONFIG_LCD */
+
+#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
+ /* reserve memory for video display (always full pages) */
+ addr = video_setmem(addr);
+ gd->fb_base = addr;
+#endif /* CONFIG_VIDEO */
+
+ /*
+ * reserve memory for U-Boot code, data & bss
+ * round down to next 4 kB limit
+ */
+ addr -= len;
+ addr &= ~(4096 - 1);
+#ifdef CONFIG_E500
+ /* round down to next 64 kB limit so that IVPR stays aligned */
+ addr &= ~(65536 - 1);
+#endif
+
+ debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
+
+ /*
+ * reserve memory for malloc() arena
+ */
+ addr_sp = addr - TOTAL_MALLOC_LEN;
+ debug("Reserving %dk for malloc() at: %08lx\n",
+ TOTAL_MALLOC_LEN >> 10, addr_sp);
+
+ /*
+ * (permanently) allocate a Board Info struct
+ * and a permanent copy of the "global" data
+ */
+ addr_sp -= sizeof(bd_t);
+ bd = (bd_t *) addr_sp;
+ memset(bd, 0, sizeof(bd_t));
+ gd->bd = bd;
+ debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+ sizeof(bd_t), addr_sp);
+ addr_sp -= sizeof(gd_t);
+ id = (gd_t *) addr_sp;
+ debug("Reserving %zu Bytes for Global Data at: %08lx\n",
+ sizeof(gd_t), addr_sp);
+
+ /*
+ * Finally, we set up a new (bigger) stack.
+ *
+ * Leave some safety gap for SP, force alignment on 16 byte boundary
+ * Clear initial stack frame
+ */
+ addr_sp -= 16;
+ addr_sp &= ~0xF;
+ s = (ulong *) addr_sp;
+ *s = 0; /* Terminate back chain */
+ *++s = 0; /* NULL return address */
+ debug("Stack Pointer at: %08lx\n", addr_sp);
+
+ /*
+ * Save local variables to board info struct
+ */
+
+ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */
+ bd->bi_memsize = gd->ram_size; /* size in bytes */
+
+#ifdef CONFIG_SYS_SRAM_BASE
+ bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */
+ bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */
+#endif
+
+#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
+ defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+ bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
+#endif
+#if defined(CONFIG_MPC5xxx)
+ bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
+#endif
+#if defined(CONFIG_MPC83xx)
+ bd->bi_immrbar = CONFIG_SYS_IMMR;
+#endif
+
+ WATCHDOG_RESET();
+ bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
+ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
+#if defined(CONFIG_CPM2)
+ bd->bi_cpmfreq = gd->arch.cpm_clk;
+ bd->bi_brgfreq = gd->arch.brg_clk;
+ bd->bi_sccfreq = gd->arch.scc_clk;
+ bd->bi_vco = gd->arch.vco_out;
+#endif /* CONFIG_CPM2 */
+#if defined(CONFIG_MPC512X)
+ bd->bi_ipsfreq = gd->arch.ips_clk;
+#endif /* CONFIG_MPC512X */
+#if defined(CONFIG_MPC5xxx)
+ bd->bi_ipbfreq = gd->arch.ipb_clk;
+ bd->bi_pcifreq = gd->pci_clk;
+#endif /* CONFIG_MPC5xxx */
+ bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
+
+#ifdef CONFIG_SYS_EXTBDINFO
+ strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version));
+ strncpy((char *) bd->bi_r_version, U_BOOT_VERSION,
+ sizeof(bd->bi_r_version));
+
+ bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
+ bd->bi_plb_busfreq = gd->bus_clk;
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ bd->bi_pci_busfreq = get_PCI_freq();
+ bd->bi_opbfreq = get_OPB_freq();
+#elif defined(CONFIG_XILINX_405)
+ bd->bi_pci_busfreq = get_PCI_freq();
+#endif
+#endif
+
+ debug("New Stack Pointer is: %08lx\n", addr_sp);
+
+ WATCHDOG_RESET();
+
+ gd->relocaddr = addr; /* Store relocation addr, useful for debug */
+
+ memcpy(id, (void *) gd, sizeof(gd_t));
+
+ relocate_code(addr_sp, id, addr);
+
+ /* NOTREACHED - relocate_code() does not return */
+}
+
+/*
+ * This is the next part if the initialization sequence: we are now
+ * running from RAM and have a "normal" C environment, i. e. global
+ * data can be written, BSS has been cleared, the stack size in not
+ * that critical any more, etc.
+ */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ bd_t *bd;
+ ulong malloc_start;
+
+#ifndef CONFIG_SYS_NO_FLASH
+ ulong flash_size;
+#endif
+
+ gd = id; /* initialize RAM version of global data */
+ bd = gd->bd;
+
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+
+ /* The Malloc area is immediately below the monitor copy in DRAM */
+ malloc_start = dest_addr - TOTAL_MALLOC_LEN;
+
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ /*
+ * The gd->arch.cpu pointer is set to an address in flash before
+ * relocation. We need to update it to point to the same CPU entry
+ * in RAM.
+ */
+ gd->arch.cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
+
+ /*
+ * If we didn't know the cpu mask & # cores, we can save them of
+ * now rather than 'computing' them constantly
+ */
+ fixup_cpu();
+#endif
+
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
+ serial_initialize();
+
+ debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
+ WATCHDOG_RESET();
+
+ /*
+ * Setup trap handlers
+ */
+ trap_init(dest_addr);
+
+#ifdef CONFIG_ADDR_MAP
+ init_addr_map();
+#endif
+
+#if defined(CONFIG_BOARD_EARLY_INIT_R)
+ board_early_init_r();
+#endif
+
+ monitor_flash_len = (ulong)&__init_end - dest_addr;
+
+ WATCHDOG_RESET();
+
+#ifdef CONFIG_LOGBUFFER
+ logbuff_init_ptrs();
+#endif
+#ifdef CONFIG_POST
+ post_output_backlog();
+#endif
+
+ WATCHDOG_RESET();
+
+#if defined(CONFIG_SYS_DELAYED_ICACHE)
+ icache_enable(); /* it's time to enable the instruction cache */
+#endif
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+ unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do early PCI configuration _before_ the flash gets initialised,
+ * because PCU ressources are crucial for flash access on some boards.
+ */
+ pci_init();
+#endif
+#if defined(CONFIG_WINBOND_83C553)
+ /*
+ * Initialise the ISA bridge
+ */
+ initialise_w83c553f();
+#endif
+
+ asm("sync ; isync");
+
+ mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN);
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+ puts("Flash: ");
+
+ if (board_flash_wp_on()) {
+ printf("Uninitialized - Write Protect On\n");
+ /* Since WP is on, we can't find real size. Set to 0 */
+ flash_size = 0;
+ } else if ((flash_size = flash_init()) > 0) {
+#ifdef CONFIG_SYS_FLASH_CHECKSUM
+ print_size(flash_size, "");
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ if (getenv_yesno("flashchecksum") == 1) {
+ printf(" CRC: %08X",
+ crc32(0,
+ (const unsigned char *)
+ CONFIG_SYS_FLASH_BASE, flash_size)
+ );
+ }
+ putc('\n');
+#else /* !CONFIG_SYS_FLASH_CHECKSUM */
+ print_size(flash_size, "\n");
+#endif /* CONFIG_SYS_FLASH_CHECKSUM */
+ } else {
+ puts(failed);
+ hang();
+ }
+
+ /* update start of FLASH memory */
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+ /* size of FLASH memory (final value) */
+ bd->bi_flashsize = flash_size;
+
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+ /* Make a update of the Memctrl. */
+ update_flash_size(flash_size);
+#endif
+
+
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
+ /* flash mapped at end of memory map */
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
+#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */
+#endif
+#endif /* !CONFIG_SYS_NO_FLASH */
+
+ WATCHDOG_RESET();
+
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r();
+
+ WATCHDOG_RESET();
+
+#ifdef CONFIG_SPI
+#if !defined(CONFIG_ENV_IS_IN_EEPROM)
+ spi_init_f();
+#endif
+ spi_init_r();
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+ WATCHDOG_RESET();
+ puts("NAND: ");
+ nand_init(); /* go init the NAND */
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+/*
+ * MMC initialization is called before relocating env.
+ * Thus It is required that operations like pin multiplexer
+ * be put in board_init.
+ */
+ WATCHDOG_RESET();
+ puts("MMC: ");
+ mmc_initialize(bd);
+#endif
+
+ /* relocate environment function pointers etc. */
+ env_relocate();
+
+ /*
+ * after non-volatile devices & environment is setup and cpu code have
+ * another round to deal with any initialization that might require
+ * full access to the environment or loading of some image (firmware)
+ * from a non-volatile device
+ */
+ cpu_secondary_init_r();
+
+ /*
+ * Fill in missing fields of bd_info.
+ * We do this here, where we have "normal" access to the
+ * environment; we used to do this still running from ROM,
+ * where had to use getenv_f(), which can be pretty slow when
+ * the environment is in EEPROM.
+ */
+
+#if defined(CONFIG_SYS_EXTBDINFO)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_I2CFAST)
+ /*
+ * set bi_iic_fast for linux taking environment variable
+ * "i2cfast" into account
+ */
+ {
+ if (getenv_yesno("i2cfast") == 1) {
+ bd->bi_iic_fast[0] = 1;
+ bd->bi_iic_fast[1] = 1;
+ }
+ }
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CONFIG_SYS_EXTBDINFO */
+
+#if defined(CONFIG_SC3)
+ sc3_read_eeprom();
+#endif
+
+#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
+ mac_read_from_eeprom();
+#endif
+
+#ifdef CONFIG_HERMES
+ if ((gd->board_type >> 16) == 2)
+ bd->bi_ethspeed = gd->board_type & 0xFFFF;
+ else
+ bd->bi_ethspeed = 0xFFFF;
+#endif
+
+#ifdef CONFIG_CMD_NET
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
+#ifdef CONFIG_HAS_ETH1
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
+#endif
+#ifdef CONFIG_HAS_ETH2
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
+#endif
+#ifdef CONFIG_HAS_ETH3
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
+#endif
+#ifdef CONFIG_HAS_ETH4
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
+#endif
+#ifdef CONFIG_HAS_ETH5
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
+#endif
+#endif /* CONFIG_CMD_NET */
+
+ WATCHDOG_RESET();
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do pci configuration
+ */
+ pci_init();
+#endif
+
+/** leave this here (after malloc(), environment and PCI are working) **/
+ /* Initialize stdio devices */
+ stdio_init();
+
+ /* Initialize the jump table for applications */
+ jumptable_init();
+
+#if defined(CONFIG_API)
+ /* Initialize API */
+ api_init();
+#endif
+
+ /* Initialize the console (after the relocation and devices init) */
+ console_init_r();
+
+#if defined(CONFIG_MISC_INIT_R)
+ /* miscellaneous platform dependent initialisations */
+ misc_init_r();
+#endif
+
+#ifdef CONFIG_HERMES
+ if (bd->bi_ethspeed != 0xFFFF)
+ hermes_start_lxt980((int) bd->bi_ethspeed);
+#endif
+
+#if defined(CONFIG_CMD_KGDB)
+ WATCHDOG_RESET();
+ puts("KGDB: ");
+ kgdb_init();
+#endif
+
+ debug("U-Boot relocated to %08lx\n", dest_addr);
+
+ /*
+ * Enable Interrupts
+ */
+ interrupt_init();
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+#endif
+
+ udelay(20);
+
+ /* Initialize from environment */
+ load_addr = getenv_ulong("loadaddr", 16, load_addr);
+
+ WATCHDOG_RESET();
+
+#if defined(CONFIG_CMD_SCSI)
+ WATCHDOG_RESET();
+ puts("SCSI: ");
+ scsi_init();
+#endif
+
+#if defined(CONFIG_CMD_DOC)
+ WATCHDOG_RESET();
+ puts("DOC: ");
+ doc_init();
+#endif
+
+#ifdef CONFIG_BITBANGMII
+ bb_miiphy_init();
+#endif
+#if defined(CONFIG_CMD_NET)
+ WATCHDOG_RESET();
+ puts("Net: ");
+ eth_initialize(bd);
+#endif
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+ WATCHDOG_RESET();
+ debug("Reset Ethernet PHY\n");
+ reset_phy();
+#endif
+
+#ifdef CONFIG_POST
+ post_run(NULL, POST_RAM | post_bootmode_get(0));
+#endif
+
+#if defined(CONFIG_CMD_PCMCIA) \
+ && !defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET();
+ puts("PCMCIA:");
+ pcmcia_init();
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+ WATCHDOG_RESET();
+#ifdef CONFIG_IDE_8xx_PCCARD
+ puts("PCMCIA:");
+#else
+ puts("IDE: ");
+#endif
+#if defined(CONFIG_START_IDE)
+ if (board_start_ide())
+ ide_init();
+#else
+ ide_init();
+#endif
+#endif
+
+#ifdef CONFIG_LAST_STAGE_INIT
+ WATCHDOG_RESET();
+ /*
+ * Some parts can be only initialized if all others (like
+ * Interrupts) are up and running (i.e. the PC-style ISA
+ * keyboard).
+ */
+ last_stage_init();
+#endif
+
+#if defined(CONFIG_CMD_BEDBUG)
+ WATCHDOG_RESET();
+ bedbug_init();
+#endif
+
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+ /*
+ * Export available size of memory for Linux,
+ * taking into account the protected RAM at top of memory
+ */
+ {
+ ulong pram = 0;
+ char memsz[32];
+
+#ifdef CONFIG_PRAM
+ pram = getenv_ulong("pram", 10, CONFIG_PRAM);
+#endif
+#ifdef CONFIG_LOGBUFFER
+#ifndef CONFIG_ALT_LB_ADDR
+ /* Also take the logbuffer into account (pram is in kB) */
+ pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
+#endif
+#endif
+ sprintf(memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+ setenv("mem", memsz);
+ }
+#endif
+
+#ifdef CONFIG_PS2KBD
+ puts("PS/2: ");
+ kbd_init();
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+ {
+ extern int do_mdm_init;
+
+ do_mdm_init = gd->do_mdm_init;
+ }
+#endif
+
+ /* Initialization complete - start the monitor */
+
+ /* main_loop() can return to retry autoboot, if so just run it again. */
+ for (;;) {
+ WATCHDOG_RESET();
+ main_loop();
+ }
+
+ /* NOTREACHED - no way out of command loop except booting */
+}
+
+#if 0 /* We could use plain global data, but the resulting code is bigger */
+/*
+ * Pointer to initial global data area
+ *
+ * Here we initialize it.
+ */
+#undef XTRN_DECLARE_GLOBAL_DATA_PTR
+#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
+DECLARE_GLOBAL_DATA_PTR =
+ (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+#endif /* 0 */
+
+/************************************************************************/
OpenPOWER on IntegriCloud