diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc8xxx/fsl_lbc.c')
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c new file mode 100644 index 0000000..c1fe579 --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -0,0 +1,153 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_lbc.h> + +#ifdef CONFIG_MPC85xx +/* Boards should provide their own version of this if they use lbc sdram */ +static void __lbc_sdram_init(void) +{ + /* Do nothing */ +} +void lbc_sdram_init(void) __attribute__((weak, alias("__lbc_sdram_init"))); +#endif + + +void print_lbc_regs(void) +{ + int i; + + printf("\nLocal Bus Controller Registers\n"); + for (i = 0; i < 8; i++) { + printf("BR%d\t0x%08X\tOR%d\t0x%08X\n", + i, get_lbc_br(i), i, get_lbc_or(i)); + } + printf("LBCR\t0x%08X\tLCRR\t0x%08X\n", + get_lbc_lbcr(), get_lbc_lcrr()); +} + +void init_early_memctl_regs(void) +{ + uint init_br1 = 1; + +#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001 + /* Set the local bus monitor timeout value to the maximum */ + clrsetbits_be32(&(LBC_BASE_ADDR)->lbcr, LBCR_BMT|LBCR_BMTPS, 0xf); +#endif + +#ifdef CONFIG_MPC85xx + /* if cs1 is already set via debugger, leave cs0/cs1 alone */ + if (get_lbc_br(1) & BR_V) + init_br1 = 0; +#endif + + /* + * Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at + * preliminary addresses - these have to be modified later + * when FLASH size has been determined + */ +#if defined(CONFIG_SYS_OR0_REMAP) + set_lbc_or(0, CONFIG_SYS_OR0_REMAP); +#endif +#if defined(CONFIG_SYS_OR1_REMAP) + set_lbc_or(1, CONFIG_SYS_OR1_REMAP); +#endif + /* now restrict to preliminary range */ + if (init_br1) { +#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM) + set_lbc_br(0, CONFIG_SYS_BR0_PRELIM); + set_lbc_or(0, CONFIG_SYS_OR0_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM) + set_lbc_or(1, CONFIG_SYS_OR1_PRELIM); + set_lbc_br(1, CONFIG_SYS_BR1_PRELIM); +#endif + } + +#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM) + set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); + set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM) + set_lbc_or(4, CONFIG_SYS_OR4_PRELIM); + set_lbc_br(4, CONFIG_SYS_BR4_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM) + set_lbc_or(5, CONFIG_SYS_OR5_PRELIM); + set_lbc_br(5, CONFIG_SYS_BR5_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM) + set_lbc_or(6, CONFIG_SYS_OR6_PRELIM); + set_lbc_br(6, CONFIG_SYS_BR6_PRELIM); +#endif + +#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM) + set_lbc_or(7, CONFIG_SYS_OR7_PRELIM); + set_lbc_br(7, CONFIG_SYS_BR7_PRELIM); +#endif +} + +/* + * Configures a UPM. The function requires the respective MxMR to be set + * before calling this function. "size" is the number or entries, not a sizeof. + */ +void upmconfig(uint upm, uint *table, uint size) +{ + fsl_lbc_t *lbc = LBC_BASE_ADDR; + int i, mad, old_mad = 0; + u32 mask = (~MxMR_OP_MSK & ~MxMR_MAD_MSK); + u32 msel = BR_UPMx_TO_MSEL(upm); + u32 *mxmr = &lbc->mamr + upm; + volatile u8 *dummy = NULL; + + if (upm < UPMA || upm > UPMC) { + printf("Error: %s() Bad UPM index %d\n", __func__, upm); + hang(); + } + + /* + * Find the address for the dummy write - scan all of the BRs until we + * find one matching the UPM and extract the base address bits from it. + */ + for (i = 0; i < 8; i++) { + if ((get_lbc_br(i) & (BR_V | BR_MSEL)) == (BR_V | msel)) { + dummy = (volatile u8 *)(get_lbc_br(i) & BR_BA); + break; + } + } + + if (!dummy) { + printf("Error: %s() No matching BR\n", __func__); + hang(); + } + + /* Program UPM using steps outlined by the reference manual */ + for (i = 0; i < size; i++) { + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_WARR | i); + out_be32(&lbc->mdr, table[i]); + (void)in_be32(&lbc->mdr); + *dummy = 0; + do { + mad = in_be32(mxmr) & MxMR_MAD_MSK; + } while (mad <= old_mad && !(!mad && i == (size-1))); + old_mad = mad; + } + + /* Return to normal operation */ + out_be32(mxmr, (in_be32(mxmr) & mask) | MxMR_OP_NORM); +} |
