summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/cpu/mpc8260/commproc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/cpu/mpc8260/commproc.c')
-rw-r--r--arch/powerpc/cpu/mpc8260/commproc.c178
1 files changed, 178 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
new file mode 100644
index 0000000..484bd17
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -0,0 +1,178 @@
+/*
+ * This file is based on "arch/powerpc/8260_io/commproc.c" - here is it's
+ * copyright notice:
+ *
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <common.h>
+#include <asm/cpm_8260.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void
+m8260_cpm_reset(void)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile ulong count;
+
+ /* Reclaim the DP memory for our use.
+ */
+ gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
+
+ /*
+ * Reset CPM
+ */
+ immr->im_cpm.cp_cpcr = CPM_CR_RST;
+ count = 0;
+ do { /* Spin until command processed */
+ __asm__ __volatile__ ("eieio");
+ } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
+
+#ifdef CONFIG_HARD_I2C
+ immr->im_dprambase16[PROFF_I2C_BASE / sizeof(u16)] = 0;
+#endif
+}
+
+/* Allocate some memory from the dual ported ram.
+ * To help protocols with object alignment restrictions, we do that
+ * if they ask.
+ */
+uint
+m8260_cpm_dpalloc(uint size, uint align)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ align_mask = align - 1;
+ savebase = gd->arch.dp_alloc_base;
+
+ off = gd->arch.dp_alloc_base & align_mask;
+ if (off != 0)
+ gd->arch.dp_alloc_base += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += align - off;
+
+ if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+ gd->arch.dp_alloc_base = savebase;
+ panic("m8260_cpm_dpalloc: ran out of dual port ram!");
+ }
+
+ retloc = gd->arch.dp_alloc_base;
+ gd->arch.dp_alloc_base += size;
+
+ memset((void *)&immr->im_dprambase[retloc], 0, size);
+
+ return(retloc);
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8260_cpm_hostalloc(uint size, uint align)
+{
+ /* the host might not even have RAM yet - just use dual port RAM */
+ return (m8260_cpm_dpalloc(size, align));
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK gd->arch.brg_clk
+#define BRG_UART_CLK (BRG_INT_CLK / 16)
+
+/* This function is used by UARTs, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+m8260_cpm_setbrg(uint brg, uint rate)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+ uint cd = BRG_UART_CLK / rate;
+
+ if ((BRG_UART_CLK % rate) < (rate / 2))
+ cd--;
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (cd << 1) | CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+m8260_cpm_fastbrg(uint brg, uint rate, int div16)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (div16)
+ *bp |= CPM_BRG_DIV16;
+}
+
+/* This function is used to set baud rate generators using an external
+ * clock source and 16x oversampling.
+ */
+
+void
+m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
+{
+ volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ volatile uint *bp;
+
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (pinsel == 0)
+ *bp |= CPM_BRG_EXTC_CLK3_9;
+ else
+ *bp |= CPM_BRG_EXTC_CLK5_15;
+}
OpenPOWER on IntegriCloud