summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/lib/string.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/lib/string.c')
-rw-r--r--arch/blackfin/lib/string.c284
1 files changed, 284 insertions, 0 deletions
diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c
new file mode 100644
index 0000000..5b7ac0b
--- /dev/null
+++ b/arch/blackfin/lib/string.c
@@ -0,0 +1,284 @@
+/*
+ * U-boot - string.c Contains library routines.
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+char *strcpy(char *dest, const char *src)
+{
+ char *xdest = dest;
+ char temp = 0;
+
+ __asm__ __volatile__ (
+ "1:\t%2 = B [%1++] (Z);\n\t"
+ "B [%0++] = %2;\n\t"
+ "CC = %2;\n\t"
+ "if cc jump 1b (bp);\n"
+ : "=a"(dest), "=a"(src), "=d"(temp)
+ : "0"(dest), "1"(src), "2"(temp)
+ : "memory");
+
+ return xdest;
+}
+
+char *strncpy(char *dest, const char *src, size_t n)
+{
+ char *xdest = dest;
+ char temp = 0;
+
+ if (n == 0)
+ return xdest;
+
+ __asm__ __volatile__ (
+ "1:\t%3 = B [%1++] (Z);\n\t"
+ "B [%0++] = %3;\n\t"
+ "CC = %3;\n\t"
+ "if ! cc jump 2f;\n\t"
+ "%2 += -1;\n\t"
+ "CC = %2 == 0;\n\t"
+ "if ! cc jump 1b (bp);\n"
+ "2:\n"
+ : "=a"(dest), "=a"(src), "=da"(n), "=d"(temp)
+ : "0"(dest), "1"(src), "2"(n), "3"(temp)
+ : "memory");
+
+ return xdest;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+ char __res1, __res2;
+
+ __asm__ (
+ "1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */
+ "%3 = B[%1++] (Z);\n\t" /* get *ct */
+ "CC = %2 == %3;\n\t" /* compare a byte */
+ "if ! cc jump 2f;\n\t" /* not equal, break out */
+ "CC = %2;\n\t" /* at end of cs? */
+ "if cc jump 1b (bp);\n\t" /* no, keep going */
+ "jump.s 3f;\n" /* strings are equal */
+ "2:\t%2 = %2 - %3;\n" /* *cs - *ct */
+ "3:\n"
+ : "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2)
+ : "0"(cs), "1"(ct));
+
+ return __res1;
+}
+
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+ char __res1, __res2;
+
+ if (!count)
+ return 0;
+
+ __asm__(
+ "1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */
+ "%4 = B[%1++] (Z);\n\t" /* get *ct */
+ "CC = %3 == %4;\n\t" /* compare a byte */
+ "if ! cc jump 3f;\n\t" /* not equal, break out */
+ "CC = %3;\n\t" /* at end of cs? */
+ "if ! cc jump 4f;\n\t" /* yes, all done */
+ "%2 += -1;\n\t" /* no, adjust count */
+ "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */
+ "2:\t%3 = 0;\n\t" /* strings are equal */
+ "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */
+ "4:"
+ : "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2)
+ : "0"(cs), "1"(ct), "2"(count));
+
+ return __res1;
+}
+
+#ifdef MDMA1_D0_NEXT_DESC_PTR
+# define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR
+# define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR
+#endif
+
+static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count,
+ unsigned long *dshift, unsigned long *bpos)
+{
+ unsigned long limit;
+
+#ifdef MSIZE
+ /* The max memory DMA memory transfer size is 32 bytes. */
+ limit = 5;
+ *dshift = MSIZE_P;
+#else
+ /* The max memory DMA memory transfer size is 4 bytes. */
+ limit = 2;
+ *dshift = WDSIZE_P;
+#endif
+
+ *bpos = min(limit, ffs(ldst | lsrc | count)) - 1;
+}
+
+/* This version misbehaves for count values of 0 and 2^16+.
+ * Perhaps we should detect that ? Nowhere do we actually
+ * use dma memcpy for those types of lengths though ...
+ */
+void dma_memcpy_nocache(void *dst, const void *src, size_t count)
+{
+ struct dma_register *mdma_d0 = (void *)MDMA_D0_NEXT_DESC_PTR;
+ struct dma_register *mdma_s0 = (void *)MDMA_S0_NEXT_DESC_PTR;
+ unsigned long ldst = (unsigned long)dst;
+ unsigned long lsrc = (unsigned long)src;
+ unsigned long dshift, bpos;
+ uint32_t dsize, mod;
+
+ /* Disable DMA in case it's still running (older u-boot's did not
+ * always turn them off). Do it before the if statement below so
+ * we can be cheap and not do a SSYNC() due to the forced abort.
+ */
+ bfin_write(&mdma_d0->config, 0);
+ bfin_write(&mdma_s0->config, 0);
+ bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR);
+
+ /* Scratchpad cannot be a DMA source or destination */
+ if ((lsrc >= L1_SRAM_SCRATCH && lsrc < L1_SRAM_SCRATCH_END) ||
+ (ldst >= L1_SRAM_SCRATCH && ldst < L1_SRAM_SCRATCH_END))
+ hang();
+
+ dma_calc_size(ldst, lsrc, count, &dshift, &bpos);
+ dsize = bpos << dshift;
+ count >>= bpos;
+ mod = 1 << bpos;
+
+#ifdef PSIZE
+ /* The max memory DMA peripheral transfer size is 4 bytes. */
+ dsize |= min(2, bpos) << PSIZE_P;
+#endif
+
+ /* Copy sram functions from sdram to sram */
+ /* Setup destination start address */
+ bfin_write(&mdma_d0->start_addr, ldst);
+ /* Setup destination xcount */
+ bfin_write(&mdma_d0->x_count, count);
+ /* Setup destination xmodify */
+ bfin_write(&mdma_d0->x_modify, mod);
+
+ /* Setup Source start address */
+ bfin_write(&mdma_s0->start_addr, lsrc);
+ /* Setup Source xcount */
+ bfin_write(&mdma_s0->x_count, count);
+ /* Setup Source xmodify */
+ bfin_write(&mdma_s0->x_modify, mod);
+
+ /* Enable source DMA */
+ bfin_write(&mdma_s0->config, dsize | DMAEN);
+ bfin_write(&mdma_d0->config, dsize | DMAEN | WNR | DI_EN);
+ SSYNC();
+
+ while (!(bfin_read(&mdma_d0->status) & DMA_DONE))
+ continue;
+
+ bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR);
+ bfin_write(&mdma_d0->config, 0);
+ bfin_write(&mdma_s0->config, 0);
+}
+/* We should do a dcache invalidate on the destination after the dma, but since
+ * we lack such hardware capability, we'll flush/invalidate the destination
+ * before the dma and bank on the idea that u-boot is single threaded.
+ */
+void *dma_memcpy(void *dst, const void *src, size_t count)
+{
+ if (dcache_status()) {
+ blackfin_dcache_flush_range(src, src + count);
+ blackfin_dcache_flush_invalidate_range(dst, dst + count);
+ }
+
+ dma_memcpy_nocache(dst, src, count);
+
+ if (icache_status())
+ blackfin_icache_flush_range(dst, dst + count);
+
+ return dst;
+}
+
+/*
+ * memcpy - Copy one area of memory to another
+ * @dest: Where to copy to
+ * @src: Where to copy from
+ * @count: The size of the area.
+ *
+ * We need to have this wrapper in memcpy() as common code may call memcpy()
+ * to load up L1 regions. Consider loading an ELF which has sections with
+ * LMA's pointing to L1. The common code ELF loader will simply use memcpy()
+ * to move the ELF's sections into the right place. We need to catch that
+ * here and redirect to dma_memcpy().
+ */
+extern void *memcpy_ASM(void *dst, const void *src, size_t count);
+void *memcpy(void *dst, const void *src, size_t count)
+{
+ if (!count)
+ return dst;
+
+#ifdef CONFIG_CMD_KGDB
+ if (src >= (void *)SYSMMR_BASE) {
+ if (count == 2 && (unsigned long)src % 2 == 0) {
+ u16 mmr = bfin_read16(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return dst;
+ }
+ if (count == 4 && (unsigned long)src % 4 == 0) {
+ u32 mmr = bfin_read32(src);
+ memcpy(dst, &mmr, sizeof(mmr));
+ return dst;
+ }
+ /* Failed for some reason */
+ memset(dst, 0xad, count);
+ return dst;
+ }
+ if (dst >= (void *)SYSMMR_BASE) {
+ if (count == 2 && (unsigned long)dst % 2 == 0) {
+ u16 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write16(dst, mmr);
+ return dst;
+ }
+ if (count == 4 && (unsigned long)dst % 4 == 0) {
+ u32 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write32(dst, mmr);
+ return dst;
+ }
+ /* Failed for some reason */
+ memset(dst, 0xad, count);
+ return dst;
+ }
+#endif
+
+ /* if L1 is the source or dst, use DMA */
+ if (addr_bfin_on_chip_mem(dst) || addr_bfin_on_chip_mem(src))
+ return dma_memcpy(dst, src, count);
+ else
+ /* No L1 is involved, so just call regular memcpy */
+ return memcpy_ASM(dst, src, count);
+}
OpenPOWER on IntegriCloud