diff options
Diffstat (limited to 'drivers/macintosh/adbhid.c')
| -rw-r--r-- | drivers/macintosh/adbhid.c | 1287 |
1 files changed, 1287 insertions, 0 deletions
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c new file mode 100644 index 0000000..5396c67 --- /dev/null +++ b/drivers/macintosh/adbhid.c @@ -0,0 +1,1287 @@ +/* + * drivers/macintosh/adbhid.c + * + * ADB HID driver for Power Macintosh computers. + * + * Adapted from drivers/macintosh/mac_keyb.c by Franz Sirl. + * drivers/macintosh/mac_keyb.c was Copyright (C) 1996 Paul Mackerras + * with considerable contributions from Ben Herrenschmidt and others. + * + * Copyright (C) 2000 Franz Sirl. + * + * Adapted to ADB changes and support for more devices by + * Benjamin Herrenschmidt. Adapted from code in MkLinux + * and reworked. + * + * Supported devices: + * + * - Standard 1 button mouse + * - All standard Apple Extended protocol (handler ID 4) + * - mouseman and trackman mice & trackballs + * - PowerBook Trackpad (default setup: enable tapping) + * - MicroSpeed mouse & trackball (needs testing) + * - CH Products Trackball Pro (needs testing) + * - Contour Design (Contour Mouse) + * - Hunter digital (NoHandsMouse) + * - Kensignton TurboMouse 5 (needs testing) + * - Mouse Systems A3 mice and trackballs <aidan@kublai.com> + * - MacAlly 2-buttons mouse (needs testing) <pochini@denise.shiny.it> + * + * To do: + * + * Improve Kensington support. + * Split mouse/kbd + * Move to syfs + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/notifier.h> +#include <linux/input.h> + +#include <linux/adb.h> +#include <linux/cuda.h> +#include <linux/pmu.h> + +#include <asm/machdep.h> +#ifdef CONFIG_PPC_PMAC +#include <asm/backlight.h> +#include <asm/pmac_feature.h> +#endif + +MODULE_AUTHOR("Franz Sirl <Franz.Sirl-kernel@lauterbach.com>"); + +static int restore_capslock_events; +module_param(restore_capslock_events, int, 0644); +MODULE_PARM_DESC(restore_capslock_events, + "Produce keypress events for capslock on both keyup and keydown."); + +#define KEYB_KEYREG 0 /* register # for key up/down data */ +#define KEYB_LEDREG 2 /* register # for leds on ADB keyboard */ +#define MOUSE_DATAREG 0 /* reg# for movement/button codes from mouse */ + +static int adb_message_handler(struct notifier_block *, unsigned long, void *); +static struct notifier_block adbhid_adb_notifier = { + .notifier_call = adb_message_handler, +}; + +/* Some special keys */ +#define ADB_KEY_DEL 0x33 +#define ADB_KEY_CMD 0x37 +#define ADB_KEY_CAPSLOCK 0x39 +#define ADB_KEY_FN 0x3f +#define ADB_KEY_FWDEL 0x75 +#define ADB_KEY_POWER_OLD 0x7e +#define ADB_KEY_POWER 0x7f + +static const u16 adb_to_linux_keycodes[128] = { + /* 0x00 */ KEY_A, /* 30 */ + /* 0x01 */ KEY_S, /* 31 */ + /* 0x02 */ KEY_D, /* 32 */ + /* 0x03 */ KEY_F, /* 33 */ + /* 0x04 */ KEY_H, /* 35 */ + /* 0x05 */ KEY_G, /* 34 */ + /* 0x06 */ KEY_Z, /* 44 */ + /* 0x07 */ KEY_X, /* 45 */ + /* 0x08 */ KEY_C, /* 46 */ + /* 0x09 */ KEY_V, /* 47 */ + /* 0x0a */ KEY_102ND, /* 86 */ + /* 0x0b */ KEY_B, /* 48 */ + /* 0x0c */ KEY_Q, /* 16 */ + /* 0x0d */ KEY_W, /* 17 */ + /* 0x0e */ KEY_E, /* 18 */ + /* 0x0f */ KEY_R, /* 19 */ + /* 0x10 */ KEY_Y, /* 21 */ + /* 0x11 */ KEY_T, /* 20 */ + /* 0x12 */ KEY_1, /* 2 */ + /* 0x13 */ KEY_2, /* 3 */ + /* 0x14 */ KEY_3, /* 4 */ + /* 0x15 */ KEY_4, /* 5 */ + /* 0x16 */ KEY_6, /* 7 */ + /* 0x17 */ KEY_5, /* 6 */ + /* 0x18 */ KEY_EQUAL, /* 13 */ + /* 0x19 */ KEY_9, /* 10 */ + /* 0x1a */ KEY_7, /* 8 */ + /* 0x1b */ KEY_MINUS, /* 12 */ + /* 0x1c */ KEY_8, /* 9 */ + /* 0x1d */ KEY_0, /* 11 */ + /* 0x1e */ KEY_RIGHTBRACE, /* 27 */ + /* 0x1f */ KEY_O, /* 24 */ + /* 0x20 */ KEY_U, /* 22 */ + /* 0x21 */ KEY_LEFTBRACE, /* 26 */ + /* 0x22 */ KEY_I, /* 23 */ + /* 0x23 */ KEY_P, /* 25 */ + /* 0x24 */ KEY_ENTER, /* 28 */ + /* 0x25 */ KEY_L, /* 38 */ + /* 0x26 */ KEY_J, /* 36 */ + /* 0x27 */ KEY_APOSTROPHE, /* 40 */ + /* 0x28 */ KEY_K, /* 37 */ + /* 0x29 */ KEY_SEMICOLON, /* 39 */ + /* 0x2a */ KEY_BACKSLASH, /* 43 */ + /* 0x2b */ KEY_COMMA, /* 51 */ + /* 0x2c */ KEY_SLASH, /* 53 */ + /* 0x2d */ KEY_N, /* 49 */ + /* 0x2e */ KEY_M, /* 50 */ + /* 0x2f */ KEY_DOT, /* 52 */ + /* 0x30 */ KEY_TAB, /* 15 */ + /* 0x31 */ KEY_SPACE, /* 57 */ + /* 0x32 */ KEY_GRAVE, /* 41 */ + /* 0x33 */ KEY_BACKSPACE, /* 14 */ + /* 0x34 */ KEY_KPENTER, /* 96 */ + /* 0x35 */ KEY_ESC, /* 1 */ + /* 0x36 */ KEY_LEFTCTRL, /* 29 */ + /* 0x37 */ KEY_LEFTMETA, /* 125 */ + /* 0x38 */ KEY_LEFTSHIFT, /* 42 */ + /* 0x39 */ KEY_CAPSLOCK, /* 58 */ + /* 0x3a */ KEY_LEFTALT, /* 56 */ + /* 0x3b */ KEY_LEFT, /* 105 */ + /* 0x3c */ KEY_RIGHT, /* 106 */ + /* 0x3d */ KEY_DOWN, /* 108 */ + /* 0x3e */ KEY_UP, /* 103 */ + /* 0x3f */ KEY_FN, /* 0x1d0 */ + /* 0x40 */ 0, + /* 0x41 */ KEY_KPDOT, /* 83 */ + /* 0x42 */ 0, + /* 0x43 */ KEY_KPASTERISK, /* 55 */ + /* 0x44 */ 0, + /* 0x45 */ KEY_KPPLUS, /* 78 */ + /* 0x46 */ 0, + /* 0x47 */ KEY_NUMLOCK, /* 69 */ + /* 0x48 */ 0, + /* 0x49 */ 0, + /* 0x4a */ 0, + /* 0x4b */ KEY_KPSLASH, /* 98 */ + /* 0x4c */ KEY_KPENTER, /* 96 */ + /* 0x4d */ 0, + /* 0x4e */ KEY_KPMINUS, /* 74 */ + /* 0x4f */ 0, + /* 0x50 */ 0, + /* 0x51 */ KEY_KPEQUAL, /* 117 */ + /* 0x52 */ KEY_KP0, /* 82 */ + /* 0x53 */ KEY_KP1, /* 79 */ + /* 0x54 */ KEY_KP2, /* 80 */ + /* 0x55 */ KEY_KP3, /* 81 */ + /* 0x56 */ KEY_KP4, /* 75 */ + /* 0x57 */ KEY_KP5, /* 76 */ + /* 0x58 */ KEY_KP6, /* 77 */ + /* 0x59 */ KEY_KP7, /* 71 */ + /* 0x5a */ 0, + /* 0x5b */ KEY_KP8, /* 72 */ + /* 0x5c */ KEY_KP9, /* 73 */ + /* 0x5d */ KEY_YEN, /* 124 */ + /* 0x5e */ KEY_RO, /* 89 */ + /* 0x5f */ KEY_KPCOMMA, /* 121 */ + /* 0x60 */ KEY_F5, /* 63 */ + /* 0x61 */ KEY_F6, /* 64 */ + /* 0x62 */ KEY_F7, /* 65 */ + /* 0x63 */ KEY_F3, /* 61 */ + /* 0x64 */ KEY_F8, /* 66 */ + /* 0x65 */ KEY_F9, /* 67 */ + /* 0x66 */ KEY_HANJA, /* 123 */ + /* 0x67 */ KEY_F11, /* 87 */ + /* 0x68 */ KEY_HANGEUL, /* 122 */ + /* 0x69 */ KEY_SYSRQ, /* 99 */ + /* 0x6a */ 0, + /* 0x6b */ KEY_SCROLLLOCK, /* 70 */ + /* 0x6c */ 0, + /* 0x6d */ KEY_F10, /* 68 */ + /* 0x6e */ KEY_COMPOSE, /* 127 */ + /* 0x6f */ KEY_F12, /* 88 */ + /* 0x70 */ 0, + /* 0x71 */ KEY_PAUSE, /* 119 */ + /* 0x72 */ KEY_INSERT, /* 110 */ + /* 0x73 */ KEY_HOME, /* 102 */ + /* 0x74 */ KEY_PAGEUP, /* 104 */ + /* 0x75 */ KEY_DELETE, /* 111 */ + /* 0x76 */ KEY_F4, /* 62 */ + /* 0x77 */ KEY_END, /* 107 */ + /* 0x78 */ KEY_F2, /* 60 */ + /* 0x79 */ KEY_PAGEDOWN, /* 109 */ + /* 0x7a */ KEY_F1, /* 59 */ + /* 0x7b */ KEY_RIGHTSHIFT, /* 54 */ + /* 0x7c */ KEY_RIGHTALT, /* 100 */ + /* 0x7d */ KEY_RIGHTCTRL, /* 97 */ + /* 0x7e */ KEY_RIGHTMETA, /* 126 */ + /* 0x7f */ KEY_POWER, /* 116 */ +}; + +struct adbhid { + struct input_dev *input; + int id; + int default_id; + int original_handler_id; + int current_handler_id; + int mouse_kind; + u16 *keycode; + char name[64]; + char phys[32]; + int flags; +}; + +#define FLAG_FN_KEY_PRESSED 0x00000001 +#define FLAG_POWER_FROM_FN 0x00000002 +#define FLAG_EMU_FWDEL_DOWN 0x00000004 +#define FLAG_CAPSLOCK_TRANSLATE 0x00000008 +#define FLAG_CAPSLOCK_DOWN 0x00000010 +#define FLAG_CAPSLOCK_IGNORE_NEXT 0x00000020 +#define FLAG_POWER_KEY_PRESSED 0x00000040 + +static struct adbhid *adbhid[16]; + +static void adbhid_probe(void); + +static void adbhid_input_keycode(int, int, int); + +static void init_trackpad(int id); +static void init_trackball(int id); +static void init_turbomouse(int id); +static void init_microspeed(int id); +static void init_ms_a3(int id); + +static struct adb_ids keyboard_ids; +static struct adb_ids mouse_ids; +static struct adb_ids buttons_ids; + +/* Kind of keyboard, see Apple technote 1152 */ +#define ADB_KEYBOARD_UNKNOWN 0 +#define ADB_KEYBOARD_ANSI 0x0100 +#define ADB_KEYBOARD_ISO 0x0200 +#define ADB_KEYBOARD_JIS 0x0300 + +/* Kind of mouse */ +#define ADBMOUSE_STANDARD_100 0 /* Standard 100cpi mouse (handler 1) */ +#define ADBMOUSE_STANDARD_200 1 /* Standard 200cpi mouse (handler 2) */ +#define ADBMOUSE_EXTENDED 2 /* Apple Extended mouse (handler 4) */ +#define ADBMOUSE_TRACKBALL 3 /* TrackBall (handler 4) */ +#define ADBMOUSE_TRACKPAD 4 /* Apple's PowerBook trackpad (handler 4) */ +#define ADBMOUSE_TURBOMOUSE5 5 /* Turbomouse 5 (previously req. mousehack) */ +#define ADBMOUSE_MICROSPEED 6 /* Microspeed mouse (&trackball ?), MacPoint */ +#define ADBMOUSE_TRACKBALLPRO 7 /* Trackball Pro (special buttons) */ +#define ADBMOUSE_MS_A3 8 /* Mouse systems A3 trackball (handler 3) */ +#define ADBMOUSE_MACALLY2 9 /* MacAlly 2-button mouse */ + +static void +adbhid_keyboard_input(unsigned char *data, int nb, int apoll) +{ + int id = (data[0] >> 4) & 0x0f; + + if (!adbhid[id]) { + printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n", + id, data[0], data[1], data[2], data[3]); + return; + } + + /* first check this is from register 0 */ + if (nb != 3 || (data[0] & 3) != KEYB_KEYREG) + return; /* ignore it */ + adbhid_input_keycode(id, data[1], 0); + if (!(data[2] == 0xff || (data[2] == 0x7f && data[1] == 0x7f))) + adbhid_input_keycode(id, data[2], 0); +} + +static void +adbhid_input_keycode(int id, int scancode, int repeat) +{ + struct adbhid *ahid = adbhid[id]; + int keycode, up_flag, key; + + keycode = scancode & 0x7f; + up_flag = scancode & 0x80; + + if (restore_capslock_events) { + if (keycode == ADB_KEY_CAPSLOCK && !up_flag) { + /* Key pressed, turning on the CapsLock LED. + * The next 0xff will be interpreted as a release. */ + if (ahid->flags & FLAG_CAPSLOCK_IGNORE_NEXT) { + /* Throw away this key event if it happens + * just after resume. */ + ahid->flags &= ~FLAG_CAPSLOCK_IGNORE_NEXT; + return; + } else { + ahid->flags |= FLAG_CAPSLOCK_TRANSLATE + | FLAG_CAPSLOCK_DOWN; + } + } else if (scancode == 0xff && + !(ahid->flags & FLAG_POWER_KEY_PRESSED)) { + /* Scancode 0xff usually signifies that the capslock + * key was either pressed or released, or that the + * power button was released. */ + if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) { + keycode = ADB_KEY_CAPSLOCK; + if (ahid->flags & FLAG_CAPSLOCK_DOWN) { + /* Key released */ + up_flag = 1; + ahid->flags &= ~FLAG_CAPSLOCK_DOWN; + } else { + /* Key pressed */ + up_flag = 0; + ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE; + } + } else { + printk(KERN_INFO "Spurious caps lock event " + "(scancode 0xff).\n"); + } + } + } + + switch (keycode) { + case ADB_KEY_CAPSLOCK: + if (!restore_capslock_events) { + /* Generate down/up events for CapsLock everytime. */ + input_report_key(ahid->input, KEY_CAPSLOCK, 1); + input_sync(ahid->input); + input_report_key(ahid->input, KEY_CAPSLOCK, 0); + input_sync(ahid->input); + return; + } + break; +#ifdef CONFIG_PPC_PMAC + case ADB_KEY_POWER_OLD: /* Power key on PBook 3400 needs remapping */ + switch(pmac_call_feature(PMAC_FTR_GET_MB_INFO, + NULL, PMAC_MB_INFO_MODEL, 0)) { + case PMAC_TYPE_COMET: + case PMAC_TYPE_HOOPER: + case PMAC_TYPE_KANGA: + keycode = ADB_KEY_POWER; + } + break; + case ADB_KEY_POWER: + /* Keep track of the power key state */ + if (up_flag) + ahid->flags &= ~FLAG_POWER_KEY_PRESSED; + else + ahid->flags |= FLAG_POWER_KEY_PRESSED; + + /* Fn + Command will produce a bogus "power" keycode */ + if (ahid->flags & FLAG_FN_KEY_PRESSED) { + keycode = ADB_KEY_CMD; + if (up_flag) + ahid->flags &= ~FLAG_POWER_FROM_FN; + else + ahid->flags |= FLAG_POWER_FROM_FN; + } else if (ahid->flags & FLAG_POWER_FROM_FN) { + keycode = ADB_KEY_CMD; + ahid->flags &= ~FLAG_POWER_FROM_FN; + } + break; + case ADB_KEY_FN: + /* Keep track of the Fn key state */ + if (up_flag) { + ahid->flags &= ~FLAG_FN_KEY_PRESSED; + /* Emulate Fn+delete = forward delete */ + if (ahid->flags & FLAG_EMU_FWDEL_DOWN) { + ahid->flags &= ~FLAG_EMU_FWDEL_DOWN; + keycode = ADB_KEY_FWDEL; + break; + } + } else + ahid->flags |= FLAG_FN_KEY_PRESSED; + break; + case ADB_KEY_DEL: + /* Emulate Fn+delete = forward delete */ + if (ahid->flags & FLAG_FN_KEY_PRESSED) { + keycode = ADB_KEY_FWDEL; + if (up_flag) + ahid->flags &= ~FLAG_EMU_FWDEL_DOWN; + else + ahid->flags |= FLAG_EMU_FWDEL_DOWN; + } + break; +#endif /* CONFIG_PPC_PMAC */ + } + + key = adbhid[id]->keycode[keycode]; + if (key) { + input_report_key(adbhid[id]->input, key, !up_flag); + input_sync(adbhid[id]->input); + } else + printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode, + up_flag ? "released" : "pressed"); + +} + +static void +adbhid_mouse_input(unsigned char *data, int nb, int autopoll) +{ + int id = (data[0] >> 4) & 0x0f; + + if (!adbhid[id]) { + printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id); + return; + } + + /* + Handler 1 -- 100cpi original Apple mouse protocol. + Handler 2 -- 200cpi original Apple mouse protocol. + + For Apple's standard one-button mouse protocol the data array will + contain the following values: + + BITS COMMENTS + data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. + data[1] = bxxx xxxx First button and x-axis motion. + data[2] = byyy yyyy Second button and y-axis motion. + + Handler 4 -- Apple Extended mouse protocol. + + For Apple's 3-button mouse protocol the data array will contain the + following values: + + BITS COMMENTS + data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. + data[1] = bxxx xxxx Left button and x-axis motion. + data[2] = byyy yyyy Second button and y-axis motion. + data[3] = byyy bxxx Third button and fourth button. Y is additional + high bits of y-axis motion. XY is additional + high bits of x-axis motion. + + MacAlly 2-button mouse protocol. + + For MacAlly 2-button mouse protocol the data array will contain the + following values: + + BITS COMMENTS + data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd. + data[1] = bxxx xxxx Left button and x-axis motion. + data[2] = byyy yyyy Right button and y-axis motion. + data[3] = ???? ???? unknown + data[4] = ???? ???? unknown + + */ + + /* If it's a trackpad, we alias the second button to the first. + NOTE: Apple sends an ADB flush command to the trackpad when + the first (the real) button is released. We could do + this here using async flush requests. + */ + switch (adbhid[id]->mouse_kind) + { + case ADBMOUSE_TRACKPAD: + data[1] = (data[1] & 0x7f) | ((data[1] & data[2]) & 0x80); + data[2] = data[2] | 0x80; + break; + case ADBMOUSE_MICROSPEED: + data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7); + data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6); + data[3] = (data[3] & 0x77) | ((data[3] & 0x04) << 5) + | (data[3] & 0x08); + break; + case ADBMOUSE_TRACKBALLPRO: + data[1] = (data[1] & 0x7f) | (((data[3] & 0x04) << 5) + & ((data[3] & 0x08) << 4)); + data[2] = (data[2] & 0x7f) | ((data[3] & 0x01) << 7); + data[3] = (data[3] & 0x77) | ((data[3] & 0x02) << 6); + break; + case ADBMOUSE_MS_A3: + data[1] = (data[1] & 0x7f) | ((data[3] & 0x01) << 7); + data[2] = (data[2] & 0x7f) | ((data[3] & 0x02) << 6); + data[3] = ((data[3] & 0x04) << 5); + break; + case ADBMOUSE_MACALLY2: + data[3] = (data[2] & 0x80) ? 0x80 : 0x00; + data[2] |= 0x80; /* Right button is mapped as button 3 */ + nb=4; + break; + } + + input_report_key(adbhid[id]->input, BTN_LEFT, !((data[1] >> 7) & 1)); + input_report_key(adbhid[id]->input, BTN_MIDDLE, !((data[2] >> 7) & 1)); + + if (nb >= 4 && adbhid[id]->mouse_kind != ADBMOUSE_TRACKPAD) + input_report_key(adbhid[id]->input, BTN_RIGHT, !((data[3] >> 7) & 1)); + + input_report_rel(adbhid[id]->input, REL_X, + ((data[2]&0x7f) < 64 ? (data[2]&0x7f) : (data[2]&0x7f)-128 )); + input_report_rel(adbhid[id]->input, REL_Y, + ((data[1]&0x7f) < 64 ? (data[1]&0x7f) : (data[1]&0x7f)-128 )); + + input_sync(adbhid[id]->input); +} + +static void +adbhid_buttons_input(unsigned char *data, int nb, int autopoll) +{ + int id = (data[0] >> 4) & 0x0f; + + if (!adbhid[id]) { + printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id); + return; + } + + switch (adbhid[id]->original_handler_id) { + default: + case 0x02: /* Adjustable keyboard button device */ + { + int down = (data[1] == (data[1] & 0xf)); + + switch (data[1] & 0x0f) { + case 0x0: /* microphone */ + input_report_key(adbhid[id]->input, KEY_SOUND, down); + break; + + case 0x1: /* mute */ + input_report_key(adbhid[id]->input, KEY_MUTE, down); + break; + + case 0x2: /* volume decrease */ + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); + break; + + case 0x3: /* volume increase */ + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); + break; + + default: + printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", + data[0], data[1], data[2], data[3]); + break; + } + } + break; + + case 0x1f: /* Powerbook button device */ + { + int down = (data[1] == (data[1] & 0xf)); + + /* + * XXX: Where is the contrast control for the passive? + * -- Cort + */ + + switch (data[1] & 0x0f) { + case 0x8: /* mute */ + input_report_key(adbhid[id]->input, KEY_MUTE, down); + break; + + case 0x7: /* volume decrease */ + input_report_key(adbhid[id]->input, KEY_VOLUMEDOWN, down); + break; + + case 0x6: /* volume increase */ + input_report_key(adbhid[id]->input, KEY_VOLUMEUP, down); + break; + + case 0xb: /* eject */ + input_report_key(adbhid[id]->input, KEY_EJECTCD, down); + break; + + case 0xa: /* brightness decrease */ +#ifdef CONFIG_PMAC_BACKLIGHT + if (down) + pmac_backlight_key_down(); +#endif + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSDOWN, down); + break; + + case 0x9: /* brightness increase */ +#ifdef CONFIG_PMAC_BACKLIGHT + if (down) + pmac_backlight_key_up(); +#endif + input_report_key(adbhid[id]->input, KEY_BRIGHTNESSUP, down); + break; + + case 0xc: /* videomode switch */ + input_report_key(adbhid[id]->input, KEY_SWITCHVIDEOMODE, down); + break; + + case 0xd: /* keyboard illumination toggle */ + input_report_key(adbhid[id]->input, KEY_KBDILLUMTOGGLE, down); + break; + + case 0xe: /* keyboard illumination decrease */ + input_report_key(adbhid[id]->input, KEY_KBDILLUMDOWN, down); + break; + + case 0xf: + switch (data[1]) { + case 0x8f: + case 0x0f: + /* keyboard illumination increase */ + input_report_key(adbhid[id]->input, KEY_KBDILLUMUP, down); + break; + + case 0x7f: + case 0xff: + /* keypad overlay toogle */ + break; + + default: + printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", + data[0], data[1], data[2], data[3]); + break; + } + break; + default: + printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n", + data[0], data[1], data[2], data[3]); + break; + } + } + break; + } + + input_sync(adbhid[id]->input); +} + +static struct adb_request led_request; +static int leds_pending[16]; +static int leds_req_pending; +static int pending_devs[16]; +static int pending_led_start; +static int pending_led_end; +static DEFINE_SPINLOCK(leds_lock); + +static void leds_done(struct adb_request *req) +{ + int leds = 0, device = 0, pending = 0; + unsigned long flags; + + spin_lock_irqsave(&leds_lock, flags); + + if (pending_led_start != pending_led_end) { + device = pending_devs[pending_led_start]; + leds = leds_pending[device] & 0xff; + leds_pending[device] = 0; + pending_led_start++; + pending_led_start = (pending_led_start < 16) ? pending_led_start : 0; + pending = leds_req_pending; + } else + leds_req_pending = 0; + spin_unlock_irqrestore(&leds_lock, flags); + if (pending) + adb_request(&led_request, leds_done, 0, 3, + ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds); +} + +static void real_leds(unsigned char leds, int device) +{ + unsigned long flags; + + spin_lock_irqsave(&leds_lock, flags); + if (!leds_req_pending) { + leds_req_pending = 1; + spin_unlock_irqrestore(&leds_lock, flags); + adb_request(&led_request, leds_done, 0, 3, + ADB_WRITEREG(device, KEYB_LEDREG), 0xff, ~leds); + return; + } else { + if (!(leds_pending[device] & 0x100)) { + pending_devs[pending_led_end] = device; + pending_led_end++; + pending_led_end = (pending_led_end < 16) ? pending_led_end : 0; + } + leds_pending[device] = leds | 0x100; + } + spin_unlock_irqrestore(&leds_lock, flags); +} + +/* + * Event callback from the input module. Events that change the state of + * the hardware are processed here. + */ +static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) +{ + struct adbhid *adbhid = input_get_drvdata(dev); + unsigned char leds; + + switch (type) { + case EV_LED: + leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) | + (test_bit(LED_NUML, dev->led) ? 1 : 0) | + (test_bit(LED_CAPSL, dev->led) ? 2 : 0); + real_leds(leds, adbhid->id); + return 0; + } + + return -1; +} + +static void +adbhid_kbd_capslock_remember(void) +{ + struct adbhid *ahid; + int i; + + for (i = 1; i < 16; i++) { + ahid = adbhid[i]; + + if (ahid && ahid->id == ADB_KEYBOARD) + if (ahid->flags & FLAG_CAPSLOCK_TRANSLATE) + ahid->flags |= FLAG_CAPSLOCK_IGNORE_NEXT; + } +} + +static int +adb_message_handler(struct notifier_block *this, unsigned long code, void *x) +{ + switch (code) { + case ADB_MSG_PRE_RESET: + case ADB_MSG_POWERDOWN: + /* Stop the repeat timer. Autopoll is already off at this point */ + { + int i; + for (i = 1; i < 16; i++) { + if (adbhid[i]) + del_timer_sync(&adbhid[i]->input->timer); + } + } + + /* Stop pending led requests */ + while (leds_req_pending) + adb_poll(); + + /* After resume, and if the capslock LED is on, the PMU will + * send a "capslock down" key event. This confuses the + * restore_capslock_events logic. Remember if the capslock + * LED was on before suspend so the unwanted key event can + * be ignored after resume. */ + if (restore_capslock_events) + adbhid_kbd_capslock_remember(); + + break; + + case ADB_MSG_POST_RESET: + adbhid_probe(); + break; + } + return NOTIFY_DONE; +} + +static int +adbhid_input_register(int id, int default_id, int original_handler_id, + int current_handler_id, int mouse_kind) +{ + struct adbhid *hid; + struct input_dev *input_dev; + int err; + int i; + + if (adbhid[id]) { + printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id); + return -EEXIST; + } + + adbhid[id] = hid = kzalloc(sizeof(struct adbhid), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!hid || !input_dev) { + err = -ENOMEM; + goto fail; + } + + sprintf(hid->phys, "adb%d:%d.%02x/input", id, default_id, original_handler_id); + + hid->input = input_dev; + hid->id = default_id; + hid->original_handler_id = original_handler_id; + hid->current_handler_id = current_handler_id; + hid->mouse_kind = mouse_kind; + hid->flags = 0; + input_set_drvdata(input_dev, hid); + input_dev->name = hid->name; + input_dev->phys = hid->phys; + input_dev->id.bustype = BUS_ADB; + input_dev->id.vendor = 0x0001; + input_dev->id.product = (id << 12) | (default_id << 8) | original_handler_id; + input_dev->id.version = 0x0100; + + switch (default_id) { + case ADB_KEYBOARD: + hid->keycode = kmalloc(sizeof(adb_to_linux_keycodes), GFP_KERNEL); + if (!hid->keycode) { + err = -ENOMEM; + goto fail; + } + + sprintf(hid->name, "ADB keyboard"); + + memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes)); + + printk(KERN_INFO "Detected ADB keyboard, type "); + switch (original_handler_id) { + default: + printk("<unknown>.\n"); + input_dev->id.version = ADB_KEYBOARD_UNKNOWN; + break; + + case 0x01: case 0x02: case 0x03: case 0x06: case 0x08: + case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C: + case 0xC0: case 0xC3: case 0xC6: + printk("ANSI.\n"); + input_dev->id.version = ADB_KEYBOARD_ANSI; + break; + + case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D: + case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1: + case 0xC4: case 0xC7: + printk("ISO, swapping keys.\n"); + input_dev->id.version = ADB_KEYBOARD_ISO; + i = hid->keycode[10]; + hid->keycode[10] = hid->keycode[50]; + hid->keycode[50] = i; + break; + + case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A: + case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9: + printk("JIS.\n"); + input_dev->id.version = ADB_KEYBOARD_JIS; + break; + } + + for (i = 0; i < 128; i++) + if (hid->keycode[i]) + set_bit(hid->keycode[i], input_dev->keybit); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_LED) | + BIT_MASK(EV_REP); + input_dev->ledbit[0] = BIT_MASK(LED_SCROLLL) | + BIT_MASK(LED_CAPSL) | BIT_MASK(LED_NUML); + input_dev->event = adbhid_kbd_event; + input_dev->keycodemax = KEY_FN; + input_dev->keycodesize = sizeof(hid->keycode[0]); + break; + + case ADB_MOUSE: + sprintf(hid->name, "ADB mouse"); + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); + break; + + case ADB_MISC: + switch (original_handler_id) { + case 0x02: /* Adjustable keyboard button device */ + sprintf(hid->name, "ADB adjustable keyboard buttons"); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | + BIT_MASK(EV_REP); + set_bit(KEY_SOUND, input_dev->keybit); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); + break; + case 0x1f: /* Powerbook button device */ + sprintf(hid->name, "ADB Powerbook buttons"); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | + BIT_MASK(EV_REP); + set_bit(KEY_MUTE, input_dev->keybit); + set_bit(KEY_VOLUMEUP, input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, input_dev->keybit); + set_bit(KEY_BRIGHTNESSUP, input_dev->keybit); + set_bit(KEY_BRIGHTNESSDOWN, input_dev->keybit); + set_bit(KEY_EJECTCD, input_dev->keybit); + set_bit(KEY_SWITCHVIDEOMODE, input_dev->keybit); + set_bit(KEY_KBDILLUMTOGGLE, input_dev->keybit); + set_bit(KEY_KBDILLUMDOWN, input_dev->keybit); + set_bit(KEY_KBDILLUMUP, input_dev->keybit); + break; + } + if (hid->name[0]) + break; + /* else fall through */ + + default: + printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n"); + err = -ENODEV; + goto fail; + } + + input_dev->keycode = hid->keycode; + + err = input_register_device(input_dev); + if (err) + goto fail; + + if (default_id == ADB_KEYBOARD) { + /* HACK WARNING!! This should go away as soon there is an utility + * to control that for event devices. + */ + input_dev->rep[REP_DELAY] = 500; /* input layer default: 250 */ + input_dev->rep[REP_PERIOD] = 66; /* input layer default: 33 */ + } + + return 0; + + fail: input_free_device(input_dev); + if (hid) { + kfree(hid->keycode); + kfree(hid); + } + adbhid[id] = NULL; + return err; +} + +static void adbhid_input_unregister(int id) +{ + input_unregister_device(adbhid[id]->input); + kfree(adbhid[id]->keycode); + kfree(adbhid[id]); + adbhid[id] = NULL; +} + + +static u16 +adbhid_input_reregister(int id, int default_id, int org_handler_id, + int cur_handler_id, int mk) +{ + if (adbhid[id]) { + if (adbhid[id]->input->id.product != + ((id << 12)|(default_id << 8)|org_handler_id)) { + adbhid_input_unregister(id); + adbhid_input_register(id, default_id, org_handler_id, + cur_handler_id, mk); + } + } else + adbhid_input_register(id, default_id, org_handler_id, + cur_handler_id, mk); + return 1<<id; +} + +static void +adbhid_input_devcleanup(u16 exist) +{ + int i; + for(i=1; i<16; i++) + if (adbhid[i] && !(exist&(1<<i))) + adbhid_input_unregister(i); +} + +static void +adbhid_probe(void) +{ + struct adb_request req; + int i, default_id, org_handler_id, cur_handler_id; + u16 reg = 0; + + adb_register(ADB_MOUSE, 0, &mouse_ids, adbhid_mouse_input); + adb_register(ADB_KEYBOARD, 0, &keyboard_ids, adbhid_keyboard_input); + adb_register(ADB_MISC, 0, &buttons_ids, adbhid_buttons_input); + + for (i = 0; i < keyboard_ids.nids; i++) { + int id = keyboard_ids.id[i]; + + adb_get_infos(id, &default_id, &org_handler_id); + + /* turn off all leds */ + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id, KEYB_LEDREG), 0xff, 0xff); + + /* Enable full feature set of the keyboard + ->get it to send separate codes for left and right shift, + control, option keys */ +#if 0 /* handler 5 doesn't send separate codes for R modifiers */ + if (adb_try_handler_change(id, 5)) + printk("ADB keyboard at %d, handler set to 5\n", id); + else +#endif + if (adb_try_handler_change(id, 3)) + printk("ADB keyboard at %d, handler set to 3\n", id); + else + printk("ADB keyboard at %d, handler 1\n", id); + + adb_get_infos(id, &default_id, &cur_handler_id); + reg |= adbhid_input_reregister(id, default_id, org_handler_id, + cur_handler_id, 0); + } + + for (i = 0; i < buttons_ids.nids; i++) { + int id = buttons_ids.id[i]; + + adb_get_infos(id, &default_id, &org_handler_id); + reg |= adbhid_input_reregister(id, default_id, org_handler_id, + org_handler_id, 0); + } + + /* Try to switch all mice to handler 4, or 2 for three-button + mode and full resolution. */ + for (i = 0; i < mouse_ids.nids; i++) { + int id = mouse_ids.id[i]; + int mouse_kind; + + adb_get_infos(id, &default_id, &org_handler_id); + + if (adb_try_handler_change(id, 4)) { + printk("ADB mouse at %d, handler set to 4", id); + mouse_kind = ADBMOUSE_EXTENDED; + } + else if (adb_try_handler_change(id, 0x2F)) { + printk("ADB mouse at %d, handler set to 0x2F", id); + mouse_kind = ADBMOUSE_MICROSPEED; + } + else if (adb_try_handler_change(id, 0x42)) { + printk("ADB mouse at %d, handler set to 0x42", id); + mouse_kind = ADBMOUSE_TRACKBALLPRO; + } + else if (adb_try_handler_change(id, 0x66)) { + printk("ADB mouse at %d, handler set to 0x66", id); + mouse_kind = ADBMOUSE_MICROSPEED; + } + else if (adb_try_handler_change(id, 0x5F)) { + printk("ADB mouse at %d, handler set to 0x5F", id); + mouse_kind = ADBMOUSE_MICROSPEED; + } + else if (adb_try_handler_change(id, 3)) { + printk("ADB mouse at %d, handler set to 3", id); + mouse_kind = ADBMOUSE_MS_A3; + } + else if (adb_try_handler_change(id, 2)) { + printk("ADB mouse at %d, handler set to 2", id); + mouse_kind = ADBMOUSE_STANDARD_200; + } + else { + printk("ADB mouse at %d, handler 1", id); + mouse_kind = ADBMOUSE_STANDARD_100; + } + + if ((mouse_kind == ADBMOUSE_TRACKBALLPRO) + || (mouse_kind == ADBMOUSE_MICROSPEED)) { + init_microspeed(id); + } else if (mouse_kind == ADBMOUSE_MS_A3) { + init_ms_a3(id); + } else if (mouse_kind == ADBMOUSE_EXTENDED) { + /* + * Register 1 is usually used for device + * identification. Here, we try to identify + * a known device and call the appropriate + * init function. + */ + adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1, + ADB_READREG(id, 1)); + + if ((req.reply_len) && + (req.reply[1] == 0x9a) && ((req.reply[2] == 0x21) + || (req.reply[2] == 0x20))) { + mouse_kind = ADBMOUSE_TRACKBALL; + init_trackball(id); + } + else if ((req.reply_len >= 4) && + (req.reply[1] == 0x74) && (req.reply[2] == 0x70) && + (req.reply[3] == 0x61) && (req.reply[4] == 0x64)) { + mouse_kind = ADBMOUSE_TRACKPAD; + init_trackpad(id); + } + else if ((req.reply_len >= 4) && + (req.reply[1] == 0x4b) && (req.reply[2] == 0x4d) && + (req.reply[3] == 0x4c) && (req.reply[4] == 0x31)) { + mouse_kind = ADBMOUSE_TURBOMOUSE5; + init_turbomouse(id); + } + else if ((req.reply_len == 9) && + (req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) && + (req.reply[3] == 0x49) && (req.reply[4] == 0x54)) { + if (adb_try_handler_change(id, 0x42)) { + printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id); + mouse_kind = ADBMOUSE_MACALLY2; + } + } + } + printk("\n"); + + adb_get_infos(id, &default_id, &cur_handler_id); + reg |= adbhid_input_reregister(id, default_id, org_handler_id, + cur_handler_id, mouse_kind); + } + adbhid_input_devcleanup(reg); +} + +static void +init_trackpad(int id) +{ + struct adb_request req; + unsigned char r1_buffer[8]; + + printk(" (trackpad)"); + + adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1, + ADB_READREG(id,1)); + if (req.reply_len < 8) + printk("bad length for reg. 1\n"); + else + { + memcpy(r1_buffer, &req.reply[1], 8); + + adb_request(&req, NULL, ADBREQ_SYNC, 9, + ADB_WRITEREG(id,1), + r1_buffer[0], + r1_buffer[1], + r1_buffer[2], + r1_buffer[3], + r1_buffer[4], + r1_buffer[5], + 0x0d, + r1_buffer[7]); + + adb_request(&req, NULL, ADBREQ_SYNC, 9, + ADB_WRITEREG(id,2), + 0x99, + 0x94, + 0x19, + 0xff, + 0xb2, + 0x8a, + 0x1b, + 0x50); + + adb_request(&req, NULL, ADBREQ_SYNC, 9, + ADB_WRITEREG(id,1), + r1_buffer[0], + r1_buffer[1], + r1_buffer[2], + r1_buffer[3], + r1_buffer[4], + r1_buffer[5], + 0x03, /*r1_buffer[6],*/ + r1_buffer[7]); + + /* Without this flush, the trackpad may be locked up */ + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); + } +} + +static void +init_trackball(int id) +{ + struct adb_request req; + + printk(" (trackman/mouseman)"); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 00,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 01,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 02,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 03,0x38); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 00,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 01,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 02,0x81); + + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id,1), 03,0x38); +} + +static void +init_turbomouse(int id) +{ + struct adb_request req; + + printk(" (TurboMouse 5)"); + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3)); + + adb_request(&req, NULL, ADBREQ_SYNC, 9, + ADB_WRITEREG(3,2), + 0xe7, + 0x8c, + 0, + 0, + 0, + 0xff, + 0xff, + 0x94); + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(3)); + + adb_request(&req, NULL, ADBREQ_SYNC, 9, + ADB_WRITEREG(3,2), + 0xa5, + 0x14, + 0, + 0, + 0x69, + 0xff, + 0xff, + 0x27); +} + +static void +init_microspeed(int id) +{ + struct adb_request req; + + printk(" (Microspeed/MacPoint or compatible)"); + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); + + /* This will initialize mice using the Microspeed, MacPoint and + other compatible firmware. Bit 12 enables extended protocol. + + Register 1 Listen (4 Bytes) + 0 - 3 Button is mouse (set also for double clicking!!!) + 4 - 7 Button is locking (affects change speed also) + 8 - 11 Button changes speed + 12 1 = Extended mouse mode, 0 = normal mouse mode + 13 - 15 unused 0 + 16 - 23 normal speed + 24 - 31 changed speed + + Register 1 talk holds version and product identification information. + Register 1 Talk (4 Bytes): + 0 - 7 Product code + 8 - 23 undefined, reserved + 24 - 31 Version number + + Speed 0 is max. 1 to 255 set speed in increments of 1/256 of max. + */ + adb_request(&req, NULL, ADBREQ_SYNC, 5, + ADB_WRITEREG(id,1), + 0x20, /* alt speed = 0x20 (rather slow) */ + 0x00, /* norm speed = 0x00 (fastest) */ + 0x10, /* extended protocol, no speed change */ + 0x07); /* all buttons enabled as mouse buttons, no locking */ + + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); +} + +static void +init_ms_a3(int id) +{ + struct adb_request req; + + printk(" (Mouse Systems A3 Mouse, or compatible)"); + adb_request(&req, NULL, ADBREQ_SYNC, 3, + ADB_WRITEREG(id, 0x2), + 0x00, + 0x07); + + adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id)); +} + +static int __init adbhid_init(void) +{ +#ifndef CONFIG_MAC + if (!machine_is(chrp) && !machine_is(powermac)) + return 0; +#endif + + led_request.complete = 1; + + adbhid_probe(); + + blocking_notifier_chain_register(&adb_client_list, + &adbhid_adb_notifier); + + return 0; +} + +static void __exit adbhid_exit(void) +{ +} + +module_init(adbhid_init); +module_exit(adbhid_exit); |
