diff options
Diffstat (limited to 'drivers/input/serio/i8042.c')
| -rw-r--r-- | drivers/input/serio/i8042.c | 1293 |
1 files changed, 1293 insertions, 0 deletions
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c new file mode 100644 index 0000000..170f71e --- /dev/null +++ b/drivers/input/serio/i8042.c @@ -0,0 +1,1293 @@ +/* + * i8042 keyboard and mouse controller driver for Linux + * + * Copyright (c) 1999-2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/serio.h> +#include <linux/err.h> +#include <linux/rcupdate.h> +#include <linux/platform_device.h> +#include <linux/i8042.h> + +#include <asm/io.h> + +MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); +MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver"); +MODULE_LICENSE("GPL"); + +static unsigned int i8042_nokbd; +module_param_named(nokbd, i8042_nokbd, bool, 0); +MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port."); + +static unsigned int i8042_noaux; +module_param_named(noaux, i8042_noaux, bool, 0); +MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port."); + +static unsigned int i8042_nomux; +module_param_named(nomux, i8042_nomux, bool, 0); +MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present."); + +static unsigned int i8042_unlock; +module_param_named(unlock, i8042_unlock, bool, 0); +MODULE_PARM_DESC(unlock, "Ignore keyboard lock."); + +static unsigned int i8042_reset; +module_param_named(reset, i8042_reset, bool, 0); +MODULE_PARM_DESC(reset, "Reset controller during init and cleanup."); + +static unsigned int i8042_direct; +module_param_named(direct, i8042_direct, bool, 0); +MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode."); + +static unsigned int i8042_dumbkbd; +module_param_named(dumbkbd, i8042_dumbkbd, bool, 0); +MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard"); + +static unsigned int i8042_noloop; +module_param_named(noloop, i8042_noloop, bool, 0); +MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port"); + +static unsigned int i8042_blink_frequency = 500; +module_param_named(panicblink, i8042_blink_frequency, uint, 0600); +MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics"); + +#ifdef CONFIG_X86 +static unsigned int i8042_dritek; +module_param_named(dritek, i8042_dritek, bool, 0); +MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension"); +#endif + +#ifdef CONFIG_PNP +static int i8042_nopnp; +module_param_named(nopnp, i8042_nopnp, bool, 0); +MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); +#endif + +#define DEBUG +#ifdef DEBUG +static int i8042_debug; +module_param_named(debug, i8042_debug, bool, 0600); +MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off"); +#endif + +#include "i8042.h" + +static DEFINE_SPINLOCK(i8042_lock); + +struct i8042_port { + struct serio *serio; + int irq; + unsigned char exists; + signed char mux; +}; + +#define I8042_KBD_PORT_NO 0 +#define I8042_AUX_PORT_NO 1 +#define I8042_MUX_PORT_NO 2 +#define I8042_NUM_PORTS (I8042_NUM_MUX_PORTS + 2) + +static struct i8042_port i8042_ports[I8042_NUM_PORTS]; + +static unsigned char i8042_initial_ctr; +static unsigned char i8042_ctr; +static unsigned char i8042_mux_present; +static unsigned char i8042_kbd_irq_registered; +static unsigned char i8042_aux_irq_registered; +static unsigned char i8042_suppress_kbd_ack; +static struct platform_device *i8042_platform_device; + +static irqreturn_t i8042_interrupt(int irq, void *dev_id); + +/* + * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to + * be ready for reading values from it / writing values to it. + * Called always with i8042_lock held. + */ + +static int i8042_wait_read(void) +{ + int i = 0; + + while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +static int i8042_wait_write(void) +{ + int i = 0; + + while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) { + udelay(50); + i++; + } + return -(i == I8042_CTL_TIMEOUT); +} + +/* + * i8042_flush() flushes all data that may be in the keyboard and mouse buffers + * of the i8042 down the toilet. + */ + +static int i8042_flush(void) +{ + unsigned long flags; + unsigned char data, str; + int i = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) { + udelay(50); + data = i8042_read_data(); + i++; + dbg("%02x <- i8042 (flush, %s)", data, + str & I8042_STR_AUXDATA ? "aux" : "kbd"); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return i; +} + +/* + * i8042_command() executes a command on the i8042. It also sends the input + * parameter(s) of the commands to it, and receives the output value(s). The + * parameters are to be stored in the param array, and the output is placed + * into the same array. The number of the parameters and output values is + * encoded in bits 8-11 of the command number. + */ + +static int __i8042_command(unsigned char *param, int command) +{ + int i, error; + + if (i8042_noloop && command == I8042_CMD_AUX_LOOP) + return -1; + + error = i8042_wait_write(); + if (error) + return error; + + dbg("%02x -> i8042 (command)", command & 0xff); + i8042_write_command(command & 0xff); + + for (i = 0; i < ((command >> 12) & 0xf); i++) { + error = i8042_wait_write(); + if (error) + return error; + dbg("%02x -> i8042 (parameter)", param[i]); + i8042_write_data(param[i]); + } + + for (i = 0; i < ((command >> 8) & 0xf); i++) { + error = i8042_wait_read(); + if (error) { + dbg(" -- i8042 (timeout)"); + return error; + } + + if (command == I8042_CMD_AUX_LOOP && + !(i8042_read_status() & I8042_STR_AUXDATA)) { + dbg(" -- i8042 (auxerr)"); + return -1; + } + + param[i] = i8042_read_data(); + dbg("%02x <- i8042 (return)", param[i]); + } + + return 0; +} + +int i8042_command(unsigned char *param, int command) +{ + unsigned long flags; + int retval; + + spin_lock_irqsave(&i8042_lock, flags); + retval = __i8042_command(param, command); + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} +EXPORT_SYMBOL(i8042_command); + +/* + * i8042_kbd_write() sends a byte out through the keyboard interface. + */ + +static int i8042_kbd_write(struct serio *port, unsigned char c) +{ + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&i8042_lock, flags); + + if (!(retval = i8042_wait_write())) { + dbg("%02x -> i8042 (kbd-data)", c); + i8042_write_data(c); + } + + spin_unlock_irqrestore(&i8042_lock, flags); + + return retval; +} + +/* + * i8042_aux_write() sends a byte out through the aux interface. + */ + +static int i8042_aux_write(struct serio *serio, unsigned char c) +{ + struct i8042_port *port = serio->port_data; + + return i8042_command(&c, port->mux == -1 ? + I8042_CMD_AUX_SEND : + I8042_CMD_MUX_SEND + port->mux); +} + +/* + * i8042_start() is called by serio core when port is about to finish + * registering. It will mark port as existing so i8042_interrupt can + * start sending data through it. + */ +static int i8042_start(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + port->exists = 1; + mb(); + return 0; +} + +/* + * i8042_stop() marks serio port as non-existing so i8042_interrupt + * will not try to send data to the port that is about to go away. + * The function is called by serio core as part of unregister procedure. + */ +static void i8042_stop(struct serio *serio) +{ + struct i8042_port *port = serio->port_data; + + port->exists = 0; + + /* + * We synchronize with both AUX and KBD IRQs because there is + * a (very unlikely) chance that AUX IRQ is raised for KBD port + * and vice versa. + */ + synchronize_irq(I8042_AUX_IRQ); + synchronize_irq(I8042_KBD_IRQ); + port->serio = NULL; +} + +/* + * i8042_interrupt() is the most important function in this driver - + * it handles the interrupts from the i8042, and sends incoming bytes + * to the upper layers. + */ + +static irqreturn_t i8042_interrupt(int irq, void *dev_id) +{ + struct i8042_port *port; + unsigned long flags; + unsigned char str, data; + unsigned int dfl; + unsigned int port_no; + int ret = 1; + + spin_lock_irqsave(&i8042_lock, flags); + str = i8042_read_status(); + if (unlikely(~str & I8042_STR_OBF)) { + spin_unlock_irqrestore(&i8042_lock, flags); + if (irq) dbg("Interrupt %d, without any data", irq); + ret = 0; + goto out; + } + data = i8042_read_data(); + spin_unlock_irqrestore(&i8042_lock, flags); + + if (i8042_mux_present && (str & I8042_STR_AUXDATA)) { + static unsigned long last_transmit; + static unsigned char last_str; + + dfl = 0; + if (str & I8042_STR_MUXERR) { + dbg("MUX error, status is %02x, data is %02x", str, data); +/* + * When MUXERR condition is signalled the data register can only contain + * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately + * it is not always the case. Some KBCs also report 0xfc when there is + * nothing connected to the port while others sometimes get confused which + * port the data came from and signal error leaving the data intact. They + * _do not_ revert to legacy mode (actually I've never seen KBC reverting + * to legacy mode yet, when we see one we'll add proper handling). + * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the + * rest assume that the data came from the same serio last byte + * was transmitted (if transmission happened not too long ago). + */ + + switch (data) { + default: + if (time_before(jiffies, last_transmit + HZ/10)) { + str = last_str; + break; + } + /* fall through - report timeout */ + case 0xfc: + case 0xfd: + case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break; + case 0xff: dfl = SERIO_PARITY; data = 0xfe; break; + } + } + + port_no = I8042_MUX_PORT_NO + ((str >> 6) & 3); + last_str = str; + last_transmit = jiffies; + } else { + + dfl = ((str & I8042_STR_PARITY) ? SERIO_PARITY : 0) | + ((str & I8042_STR_TIMEOUT) ? SERIO_TIMEOUT : 0); + + port_no = (str & I8042_STR_AUXDATA) ? + I8042_AUX_PORT_NO : I8042_KBD_PORT_NO; + } + + port = &i8042_ports[port_no]; + + dbg("%02x <- i8042 (interrupt, %d, %d%s%s)", + data, port_no, irq, + dfl & SERIO_PARITY ? ", bad parity" : "", + dfl & SERIO_TIMEOUT ? ", timeout" : ""); + + if (unlikely(i8042_suppress_kbd_ack)) + if (port_no == I8042_KBD_PORT_NO && + (data == 0xfa || data == 0xfe)) { + i8042_suppress_kbd_ack--; + goto out; + } + + if (likely(port->exists)) + serio_interrupt(port->serio, data, dfl); + + out: + return IRQ_RETVAL(ret); +} + +/* + * i8042_enable_kbd_port enables keybaord port on chip + */ + +static int i8042_enable_kbd_port(void) +{ + i8042_ctr &= ~I8042_CTR_KBDDIS; + i8042_ctr |= I8042_CTR_KBDINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_KBDINT; + i8042_ctr |= I8042_CTR_KBDDIS; + printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n"); + return -EIO; + } + + return 0; +} + +/* + * i8042_enable_aux_port enables AUX (mouse) port on chip + */ + +static int i8042_enable_aux_port(void) +{ + i8042_ctr &= ~I8042_CTR_AUXDIS; + i8042_ctr |= I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + i8042_ctr &= ~I8042_CTR_AUXINT; + i8042_ctr |= I8042_CTR_AUXDIS; + printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n"); + return -EIO; + } + + return 0; +} + +/* + * i8042_enable_mux_ports enables 4 individual AUX ports after + * the controller has been switched into Multiplexed mode + */ + +static int i8042_enable_mux_ports(void) +{ + unsigned char param; + int i; + + for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { + i8042_command(¶m, I8042_CMD_MUX_PFX + i); + i8042_command(¶m, I8042_CMD_AUX_ENABLE); + } + + return i8042_enable_aux_port(); +} + +/* + * i8042_set_mux_mode checks whether the controller has an active + * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode. + */ + +static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version) +{ + + unsigned char param; +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - send three bytes, they should come back from the + * mouse interface, the last should be version. + */ + + param = 0xf0; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != 0xf0) + return -1; + param = mode ? 0x56 : 0xf6; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6)) + return -1; + param = mode ? 0xa4 : 0xa5; + if (i8042_command(¶m, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5)) + return -1; + + if (mux_version) + *mux_version = param; + + return 0; +} + +/* + * i8042_check_mux() checks whether the controller supports the PS/2 Active + * Multiplexing specification by Synaptics, Phoenix, Insyde and + * LCS/Telegraphics. + */ + +static int __devinit i8042_check_mux(void) +{ + unsigned char mux_version; + + if (i8042_set_mux_mode(1, &mux_version)) + return -1; + +/* + * Workaround for interference with USB Legacy emulation + * that causes a v10.12 MUX to be found. + */ + if (mux_version == 0xAC) + return -1; + + printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n", + (mux_version >> 4) & 0xf, mux_version & 0xf); + +/* + * Disable all muxed ports by disabling AUX. + */ + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n"); + return -EIO; + } + + i8042_mux_present = 1; + + return 0; +} + +/* + * The following is used to test AUX IRQ delivery. + */ +static struct completion i8042_aux_irq_delivered __devinitdata; +static int i8042_irq_being_tested __devinitdata; + +static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) +{ + unsigned long flags; + unsigned char str, data; + int ret = 0; + + spin_lock_irqsave(&i8042_lock, flags); + str = i8042_read_status(); + if (str & I8042_STR_OBF) { + data = i8042_read_data(); + if (i8042_irq_being_tested && + data == 0xa5 && (str & I8042_STR_AUXDATA)) + complete(&i8042_aux_irq_delivered); + ret = 1; + } + spin_unlock_irqrestore(&i8042_lock, flags); + + return IRQ_RETVAL(ret); +} + +/* + * i8042_toggle_aux - enables or disables AUX port on i8042 via command and + * verifies success by readinng CTR. Used when testing for presence of AUX + * port. + */ +static int __devinit i8042_toggle_aux(int on) +{ + unsigned char param; + int i; + + if (i8042_command(¶m, + on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE)) + return -1; + + /* some chips need some time to set the I8042_CTR_AUXDIS bit */ + for (i = 0; i < 100; i++) { + udelay(50); + + if (i8042_command(¶m, I8042_CMD_CTL_RCTR)) + return -1; + + if (!(param & I8042_CTR_AUXDIS) == on) + return 0; + } + + return -1; +} + +/* + * i8042_check_aux() applies as much paranoia as it can at detecting + * the presence of an AUX interface. + */ + +static int __devinit i8042_check_aux(void) +{ + int retval = -1; + int irq_registered = 0; + int aux_loop_broken = 0; + unsigned long flags; + unsigned char param; + +/* + * Get rid of bytes in the queue. + */ + + i8042_flush(); + +/* + * Internal loopback test - filters out AT-type i8042's. Unfortunately + * SiS screwed up and their 5597 doesn't support the LOOP command even + * though it has an AUX port. + */ + + param = 0x5a; + retval = i8042_command(¶m, I8042_CMD_AUX_LOOP); + if (retval || param != 0x5a) { + +/* + * External connection test - filters out AT-soldered PS/2 i8042's + * 0x00 - no error, 0x01-0x03 - clock/data stuck, 0xff - general error + * 0xfa - no error on some notebooks which ignore the spec + * Because it's common for chipsets to return error on perfectly functioning + * AUX ports, we test for this only when the LOOP command failed. + */ + + if (i8042_command(¶m, I8042_CMD_AUX_TEST) || + (param && param != 0xfa && param != 0xff)) + return -1; + +/* + * If AUX_LOOP completed without error but returned unexpected data + * mark it as broken + */ + if (!retval) + aux_loop_broken = 1; + } + +/* + * Bit assignment test - filters out PS/2 i8042's in AT mode + */ + + if (i8042_toggle_aux(0)) { + printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); + printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); + } + + if (i8042_toggle_aux(1)) + return -1; + +/* + * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and + * used it for a PCI card or somethig else. + */ + + if (i8042_noloop || aux_loop_broken) { +/* + * Without LOOP command we can't test AUX IRQ delivery. Assume the port + * is working and hope we are right. + */ + retval = 0; + goto out; + } + + if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED, + "i8042", i8042_platform_device)) + goto out; + + irq_registered = 1; + + if (i8042_enable_aux_port()) + goto out; + + spin_lock_irqsave(&i8042_lock, flags); + + init_completion(&i8042_aux_irq_delivered); + i8042_irq_being_tested = 1; + + param = 0xa5; + retval = __i8042_command(¶m, I8042_CMD_AUX_LOOP & 0xf0ff); + + spin_unlock_irqrestore(&i8042_lock, flags); + + if (retval) + goto out; + + if (wait_for_completion_timeout(&i8042_aux_irq_delivered, + msecs_to_jiffies(250)) == 0) { +/* + * AUX IRQ was never delivered so we need to flush the controller to + * get rid of the byte we put there; otherwise keyboard may not work. + */ + i8042_flush(); + retval = -1; + } + + out: + +/* + * Disable the interface. + */ + + i8042_ctr |= I8042_CTR_AUXDIS; + i8042_ctr &= ~I8042_CTR_AUXINT; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) + retval = -1; + + if (irq_registered) + free_irq(I8042_AUX_IRQ, i8042_platform_device); + + return retval; +} + +static int i8042_controller_check(void) +{ + if (i8042_flush() == I8042_BUFFER_SIZE) { + printk(KERN_ERR "i8042.c: No controller found.\n"); + return -ENODEV; + } + + return 0; +} + +static int i8042_controller_selftest(void) +{ + unsigned char param; + + if (!i8042_reset) + return 0; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -ENODEV; + } + + if (param != I8042_RET_CTL_TEST) { + printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", + param, I8042_RET_CTL_TEST); + return -EIO; + } + + return 0; +} + +/* + * i8042_controller init initializes the i8042 controller, and, + * most importantly, sets it into non-xlated mode if that's + * desired. + */ + +static int i8042_controller_init(void) +{ + unsigned long flags; + +/* + * Save the CTR for restoral on unload / reboot. + */ + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { + printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n"); + return -EIO; + } + + i8042_initial_ctr = i8042_ctr; + +/* + * Disable the keyboard interface and interrupt. + */ + + i8042_ctr |= I8042_CTR_KBDDIS; + i8042_ctr &= ~I8042_CTR_KBDINT; + +/* + * Handle keylock. + */ + + spin_lock_irqsave(&i8042_lock, flags); + if (~i8042_read_status() & I8042_STR_KEYLOCK) { + if (i8042_unlock) + i8042_ctr |= I8042_CTR_IGNKEYLOCK; + else + printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n"); + } + spin_unlock_irqrestore(&i8042_lock, flags); + +/* + * If the chip is configured into nontranslated mode by the BIOS, don't + * bother enabling translating and be happy. + */ + + if (~i8042_ctr & I8042_CTR_XLATE) + i8042_direct = 1; + +/* + * Set nontranslated mode for the kbd interface if requested by an option. + * After this the kbd interface becomes a simple serial in/out, like the aux + * interface is. We don't do this by default, since it can confuse notebook + * BIOSes. + */ + + if (i8042_direct) + i8042_ctr &= ~I8042_CTR_XLATE; + +/* + * Write CTR back. + */ + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n"); + return -EIO; + } + + return 0; +} + + +/* + * Reset the controller and reset CRT to the original value set by BIOS. + */ + +static void i8042_controller_reset(void) +{ + i8042_flush(); + +/* + * Disable both KBD and AUX interfaces so they don't get in the way + */ + + i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; + i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); + +/* + * Disable MUX mode if present. + */ + + if (i8042_mux_present) + i8042_set_mux_mode(0, NULL); + +/* + * Reset the controller if requested. + */ + + i8042_controller_selftest(); + +/* + * Restore the original control register setting. + */ + + if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + printk(KERN_WARNING "i8042.c: Can't restore CTR.\n"); +} + + +/* + * i8042_panic_blink() will flash the keyboard LEDs and is called when + * kernel panics. Flashing LEDs is useful for users running X who may + * not see the console and will help distingushing panics from "real" + * lockups. + * + * Note that DELAY has a limit of 10ms so we will not get stuck here + * waiting for KBC to free up even if KBD interrupt is off + */ + +#define DELAY do { mdelay(1); if (++delay > 10) return delay; } while(0) + +static long i8042_panic_blink(long count) +{ + long delay = 0; + static long last_blink; + static char led; + + /* + * We expect frequency to be about 1/2s. KDB uses about 1s. + * Make sure they are different. + */ + if (!i8042_blink_frequency) + return 0; + if (count - last_blink < i8042_blink_frequency) + return 0; + + led ^= 0x01 | 0x04; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + dbg("%02x -> i8042 (panic blink)", 0xed); + i8042_suppress_kbd_ack = 2; + i8042_write_data(0xed); /* set leds */ + DELAY; + while (i8042_read_status() & I8042_STR_IBF) + DELAY; + DELAY; + dbg("%02x -> i8042 (panic blink)", led); + i8042_write_data(led); + DELAY; + last_blink = count; + return delay; +} + +#undef DELAY + +#ifdef CONFIG_X86 +static void i8042_dritek_enable(void) +{ + char param = 0x90; + int error; + + error = i8042_command(¶m, 0x1059); + if (error) + printk(KERN_WARNING + "Failed to enable DRITEK extension: %d\n", + error); +} +#endif + +#ifdef CONFIG_PM +/* + * Here we try to restore the original BIOS settings. We only want to + * do that once, when we really suspend, not when we taking memory + * snapshot for swsusp (in this case we'll perform required cleanup + * as part of shutdown process). + */ + +static int i8042_suspend(struct platform_device *dev, pm_message_t state) +{ + if (dev->dev.power.power_state.event != state.event) { + if (state.event == PM_EVENT_SUSPEND) + i8042_controller_reset(); + + dev->dev.power.power_state = state; + } + + return 0; +} + + +/* + * Here we try to reset everything back to a state in which suspended + */ + +static int i8042_resume(struct platform_device *dev) +{ + int error; + +/* + * Do not bother with restoring state if we haven't suspened yet + */ + if (dev->dev.power.power_state.event == PM_EVENT_ON) + return 0; + + error = i8042_controller_check(); + if (error) + return error; + + error = i8042_controller_selftest(); + if (error) + return error; + +/* + * Restore original CTR value and disable all ports + */ + + i8042_ctr = i8042_initial_ctr; + if (i8042_direct) + i8042_ctr &= ~I8042_CTR_XLATE; + i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; + i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: CTR write retry failed\n"); + return -EIO; + } + } + + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + + if (i8042_mux_present) { + if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) + printk(KERN_WARNING + "i8042: failed to resume active multiplexor, " + "mouse won't work.\n"); + } else if (i8042_ports[I8042_AUX_PORT_NO].serio) + i8042_enable_aux_port(); + + if (i8042_ports[I8042_KBD_PORT_NO].serio) + i8042_enable_kbd_port(); + + i8042_interrupt(0, NULL); + + dev->dev.power.power_state = PMSG_ON; + + return 0; +} +#endif /* CONFIG_PM */ + +/* + * We need to reset the 8042 back to original mode on system shutdown, + * because otherwise BIOSes will be confused. + */ + +static void i8042_shutdown(struct platform_device *dev) +{ + i8042_controller_reset(); +} + +static int __devinit i8042_create_kbd_port(void) +{ + struct serio *serio; + struct i8042_port *port = &i8042_ports[I8042_KBD_PORT_NO]; + + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + serio->id.type = i8042_direct ? SERIO_8042 : SERIO_8042_XL; + serio->write = i8042_dumbkbd ? NULL : i8042_kbd_write; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name)); + strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys)); + + port->serio = serio; + port->irq = I8042_KBD_IRQ; + + return 0; +} + +static int __devinit i8042_create_aux_port(int idx) +{ + struct serio *serio; + int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx; + struct i8042_port *port = &i8042_ports[port_no]; + + serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + serio->id.type = SERIO_8042; + serio->write = i8042_aux_write; + serio->start = i8042_start; + serio->stop = i8042_stop; + serio->port_data = port; + serio->dev.parent = &i8042_platform_device->dev; + if (idx < 0) { + strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name)); + strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys)); + } else { + snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx); + snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1); + } + + port->serio = serio; + port->mux = idx; + port->irq = I8042_AUX_IRQ; + + return 0; +} + +static void __devinit i8042_free_kbd_port(void) +{ + kfree(i8042_ports[I8042_KBD_PORT_NO].serio); + i8042_ports[I8042_KBD_PORT_NO].serio = NULL; +} + +static void __devinit i8042_free_aux_ports(void) +{ + int i; + + for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) { + kfree(i8042_ports[i].serio); + i8042_ports[i].serio = NULL; + } +} + +static void __devinit i8042_register_ports(void) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + if (i8042_ports[i].serio) { + printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n", + i8042_ports[i].serio->name, + (unsigned long) I8042_DATA_REG, + (unsigned long) I8042_COMMAND_REG, + i8042_ports[i].irq); + serio_register_port(i8042_ports[i].serio); + } + } +} + +static void __devexit i8042_unregister_ports(void) +{ + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + if (i8042_ports[i].serio) { + serio_unregister_port(i8042_ports[i].serio); + i8042_ports[i].serio = NULL; + } + } +} + +static void i8042_free_irqs(void) +{ + if (i8042_aux_irq_registered) + free_irq(I8042_AUX_IRQ, i8042_platform_device); + if (i8042_kbd_irq_registered) + free_irq(I8042_KBD_IRQ, i8042_platform_device); + + i8042_aux_irq_registered = i8042_kbd_irq_registered = 0; +} + +static int __devinit i8042_setup_aux(void) +{ + int (*aux_enable)(void); + int error; + int i; + + if (i8042_check_aux()) + return -ENODEV; + + if (i8042_nomux || i8042_check_mux()) { + error = i8042_create_aux_port(-1); + if (error) + goto err_free_ports; + aux_enable = i8042_enable_aux_port; + } else { + for (i = 0; i < I8042_NUM_MUX_PORTS; i++) { + error = i8042_create_aux_port(i); + if (error) + goto err_free_ports; + } + aux_enable = i8042_enable_mux_ports; + } + + error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED, + "i8042", i8042_platform_device); + if (error) + goto err_free_ports; + + if (aux_enable()) + goto err_free_irq; + + i8042_aux_irq_registered = 1; + return 0; + + err_free_irq: + free_irq(I8042_AUX_IRQ, i8042_platform_device); + err_free_ports: + i8042_free_aux_ports(); + return error; +} + +static int __devinit i8042_setup_kbd(void) +{ + int error; + + error = i8042_create_kbd_port(); + if (error) + return error; + + error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED, + "i8042", i8042_platform_device); + if (error) + goto err_free_port; + + error = i8042_enable_kbd_port(); + if (error) + goto err_free_irq; + + i8042_kbd_irq_registered = 1; + return 0; + + err_free_irq: + free_irq(I8042_KBD_IRQ, i8042_platform_device); + err_free_port: + i8042_free_kbd_port(); + return error; +} + +static int __devinit i8042_probe(struct platform_device *dev) +{ + int error; + + error = i8042_controller_selftest(); + if (error) + return error; + + error = i8042_controller_init(); + if (error) + return error; + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + + if (!i8042_noaux) { + error = i8042_setup_aux(); + if (error && error != -ENODEV && error != -EBUSY) + goto out_fail; + } + + if (!i8042_nokbd) { + error = i8042_setup_kbd(); + if (error) + goto out_fail; + } +/* + * Ok, everything is ready, let's register all serio ports + */ + i8042_register_ports(); + + return 0; + + out_fail: + i8042_free_aux_ports(); /* in case KBD failed but AUX not */ + i8042_free_irqs(); + i8042_controller_reset(); + + return error; +} + +static int __devexit i8042_remove(struct platform_device *dev) +{ + i8042_unregister_ports(); + i8042_free_irqs(); + i8042_controller_reset(); + + return 0; +} + +static struct platform_driver i8042_driver = { + .driver = { + .name = "i8042", + .owner = THIS_MODULE, + }, + .probe = i8042_probe, + .remove = __devexit_p(i8042_remove), + .shutdown = i8042_shutdown, +#ifdef CONFIG_PM + .suspend = i8042_suspend, + .resume = i8042_resume, +#endif +}; + +static int __init i8042_init(void) +{ + int err; + + dbg_init(); + + err = i8042_platform_init(); + if (err) + return err; + + err = i8042_controller_check(); + if (err) + goto err_platform_exit; + + err = platform_driver_register(&i8042_driver); + if (err) + goto err_platform_exit; + + i8042_platform_device = platform_device_alloc("i8042", -1); + if (!i8042_platform_device) { + err = -ENOMEM; + goto err_unregister_driver; + } + + err = platform_device_add(i8042_platform_device); + if (err) + goto err_free_device; + + panic_blink = i8042_panic_blink; + + return 0; + + err_free_device: + platform_device_put(i8042_platform_device); + err_unregister_driver: + platform_driver_unregister(&i8042_driver); + err_platform_exit: + i8042_platform_exit(); + + return err; +} + +static void __exit i8042_exit(void) +{ + platform_device_unregister(i8042_platform_device); + platform_driver_unregister(&i8042_driver); + i8042_platform_exit(); + + panic_blink = NULL; +} + +module_init(i8042_init); +module_exit(i8042_exit); |
