summaryrefslogtreecommitdiffstats
path: root/drivers/ide/gayle.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/gayle.c')
-rw-r--r--drivers/ide/gayle.c190
1 files changed, 190 insertions, 0 deletions
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c
new file mode 100644
index 0000000..6915068
--- /dev/null
+++ b/drivers/ide/gayle.c
@@ -0,0 +1,190 @@
+/*
+ * Amiga Gayle IDE Driver
+ *
+ * Created 9 Jul 1997 by Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/zorro.h>
+#include <linux/module.h>
+
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+#include <asm/amigayle.h>
+
+
+ /*
+ * Bases of the IDE interfaces
+ */
+
+#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */
+#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */
+
+#define GAYLE_IDEREG_SIZE 0x2000
+
+ /*
+ * Offsets from one of the above bases
+ */
+
+#define GAYLE_CONTROL 0x101a
+
+ /*
+ * These are at different offsets from the base
+ */
+
+#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */
+#define GAYLE_IRQ_1200 0xda9000 /* interrupt */
+
+
+ /*
+ * Offset of the secondary port for IDE doublers
+ * Note that GAYLE_CONTROL is NOT available then!
+ */
+
+#define GAYLE_NEXT_PORT 0x1000
+
+#ifndef CONFIG_BLK_DEV_IDEDOUBLER
+#define GAYLE_NUM_HWIFS 1
+#define GAYLE_NUM_PROBE_HWIFS GAYLE_NUM_HWIFS
+#define GAYLE_HAS_CONTROL_REG 1
+#else /* CONFIG_BLK_DEV_IDEDOUBLER */
+#define GAYLE_NUM_HWIFS 2
+#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \
+ GAYLE_NUM_HWIFS-1)
+#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
+
+static int ide_doubler;
+module_param_named(doubler, ide_doubler, bool, 0);
+MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
+#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
+
+
+ /*
+ * Check and acknowledge the interrupt status
+ */
+
+static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
+{
+ unsigned char ch;
+
+ ch = z_readb(hwif->io_ports.irq_addr);
+ if (!(ch & GAYLE_IRQ_IDE))
+ return 0;
+ return 1;
+}
+
+static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
+{
+ unsigned char ch;
+
+ ch = z_readb(hwif->io_ports.irq_addr);
+ if (!(ch & GAYLE_IRQ_IDE))
+ return 0;
+ (void)z_readb(hwif->io_ports.status_addr);
+ z_writeb(0x7c, hwif->io_ports.irq_addr);
+ return 1;
+}
+
+static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base,
+ unsigned long ctl, unsigned long irq_port,
+ ide_ack_intr_t *ack_intr)
+{
+ int i;
+
+ memset(hw, 0, sizeof(*hw));
+
+ hw->io_ports.data_addr = base;
+
+ for (i = 1; i < 8; i++)
+ hw->io_ports_array[i] = base + 2 + i * 4;
+
+ hw->io_ports.ctl_addr = ctl;
+ hw->io_ports.irq_addr = irq_port;
+
+ hw->irq = IRQ_AMIGA_PORTS;
+ hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
+}
+
+ /*
+ * Probe for a Gayle IDE interface (and optionally for an IDE doubler)
+ */
+
+static int __init gayle_init(void)
+{
+ unsigned long phys_base, res_start, res_n;
+ unsigned long base, ctrlport, irqport;
+ ide_ack_intr_t *ack_intr;
+ int a4000, i, rc;
+ hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL };
+
+ if (!MACH_IS_AMIGA)
+ return -ENODEV;
+
+ if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE))
+ goto found;
+
+#ifdef CONFIG_ZORRO
+ if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE,
+ NULL))
+ goto found;
+#endif
+ return -ENODEV;
+
+found:
+ printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n",
+ a4000 ? 4000 : 1200,
+#ifdef CONFIG_BLK_DEV_IDEDOUBLER
+ ide_doubler ? ", IDE doubler" :
+#endif
+ "");
+
+ if (a4000) {
+ phys_base = GAYLE_BASE_4000;
+ irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000);
+ ack_intr = gayle_ack_intr_a4000;
+ } else {
+ phys_base = GAYLE_BASE_1200;
+ irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200);
+ ack_intr = gayle_ack_intr_a1200;
+ }
+/*
+ * FIXME: we now have selectable modes between mmio v/s iomio
+ */
+
+ res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
+ res_n = GAYLE_IDEREG_SIZE;
+
+ if (!request_mem_region(res_start, res_n, "IDE"))
+ return -EBUSY;
+
+ for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
+ base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT);
+ ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
+
+ gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr);
+
+ hws[i] = &hw[i];
+ }
+
+ rc = ide_host_add(NULL, hws, NULL);
+ if (rc)
+ release_mem_region(res_start, res_n);
+
+ return rc;
+}
+
+module_init(gayle_init);
+
+MODULE_LICENSE("GPL");
OpenPOWER on IntegriCloud