summaryrefslogtreecommitdiffstats
path: root/drivers/char/rio/daemon.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/rio/daemon.h')
-rw-r--r--drivers/char/rio/daemon.h307
1 files changed, 307 insertions, 0 deletions
diff --git a/drivers/char/rio/daemon.h b/drivers/char/rio/daemon.h
new file mode 100644
index 0000000..4af9032
--- /dev/null
+++ b/drivers/char/rio/daemon.h
@@ -0,0 +1,307 @@
+/*
+** -----------------------------------------------------------------------------
+**
+** Perle Specialix driver for Linux
+** Ported from existing RIO Driver for SCO sources.
+ *
+ * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+** Module : daemon.h
+** SID : 1.3
+** Last Modified : 11/6/98 11:34:09
+** Retrieved : 11/6/98 11:34:21
+**
+** ident @(#)daemon.h 1.3
+**
+** -----------------------------------------------------------------------------
+*/
+
+#ifndef __rio_daemon_h__
+#define __rio_daemon_h__
+
+
+/*
+** structures used on /dev/rio
+*/
+
+struct Error {
+ unsigned int Error;
+ unsigned int Entry;
+ unsigned int Other;
+};
+
+struct DownLoad {
+ char __user *DataP;
+ unsigned int Count;
+ unsigned int ProductCode;
+};
+
+/*
+** A few constants....
+*/
+#ifndef MAX_VERSION_LEN
+#define MAX_VERSION_LEN 256
+#endif
+
+#ifndef MAX_XP_CTRL_LEN
+#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */
+#endif
+
+struct PortSetup {
+ unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */
+ unsigned int To; /* .... to this port */
+ unsigned int XpCps; /* at this speed */
+ char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */
+ char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */
+ u8 IxAny; /* enable/disable IXANY */
+ u8 IxOn; /* enable/disable IXON */
+ u8 Lock; /* lock port params */
+ u8 Store; /* store params across closes */
+ u8 Drain; /* close only when drained */
+};
+
+struct LpbReq {
+ unsigned int Host;
+ unsigned int Link;
+ struct LPB __user *LpbP;
+};
+
+struct RupReq {
+ unsigned int HostNum;
+ unsigned int RupNum;
+ struct RUP __user *RupP;
+};
+
+struct PortReq {
+ unsigned int SysPort;
+ struct Port __user *PortP;
+};
+
+struct StreamInfo {
+ unsigned int SysPort;
+ int RQueue;
+ int WQueue;
+};
+
+struct HostReq {
+ unsigned int HostNum;
+ struct Host __user *HostP;
+};
+
+struct HostDpRam {
+ unsigned int HostNum;
+ struct DpRam __user *DpRamP;
+};
+
+struct DebugCtrl {
+ unsigned int SysPort;
+ unsigned int Debug;
+ unsigned int Wait;
+};
+
+struct MapInfo {
+ unsigned int FirstPort; /* 8 ports, starting from this (tty) number */
+ unsigned int RtaUnique; /* reside on this RTA (unique number) */
+};
+
+struct MapIn {
+ unsigned int NumEntries; /* How many port sets are we mapping? */
+ struct MapInfo *MapInfoP; /* Pointer to (user space) info */
+};
+
+struct SendPack {
+ unsigned int PortNum;
+ unsigned char Len;
+ unsigned char Data[PKT_MAX_DATA_LEN];
+};
+
+struct SpecialRupCmd {
+ struct PKT Packet;
+ unsigned short Host;
+ unsigned short RupNum;
+};
+
+struct IdentifyRta {
+ unsigned long RtaUnique;
+ u8 ID;
+};
+
+struct KillNeighbour {
+ unsigned long UniqueNum;
+ u8 Link;
+};
+
+struct rioVersion {
+ char version[MAX_VERSION_LEN];
+ char relid[MAX_VERSION_LEN];
+ int buildLevel;
+ char buildDate[MAX_VERSION_LEN];
+};
+
+
+/*
+** RIOC commands are for the daemon type operations
+**
+** 09.12.1998 ARG - ESIL 0776 part fix
+** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
+** #ifndef here first.
+** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
+** allowed to be used by customers.
+*/
+#ifndef RIOC
+#define RIOC ('R'<<8)|('i'<<16)|('o'<<24)
+#endif
+
+/*
+** Boot stuff
+*/
+#define RIO_GET_TABLE (RIOC | 100)
+#define RIO_PUT_TABLE (RIOC | 101)
+#define RIO_ASSIGN_RTA (RIOC | 102)
+#define RIO_DELETE_RTA (RIOC | 103)
+#define RIO_HOST_FOAD (RIOC | 104)
+#define RIO_QUICK_CHECK (RIOC | 105)
+#define RIO_SIGNALS_ON (RIOC | 106)
+#define RIO_SIGNALS_OFF (RIOC | 107)
+#define RIO_CHANGE_NAME (RIOC | 108)
+#define RIO_DOWNLOAD (RIOC | 109)
+#define RIO_GET_LOG (RIOC | 110)
+#define RIO_SETUP_PORTS (RIOC | 111)
+#define RIO_ALL_MODEM (RIOC | 112)
+
+/*
+** card state, debug stuff
+*/
+#define RIO_NUM_HOSTS (RIOC | 120)
+#define RIO_HOST_LPB (RIOC | 121)
+#define RIO_HOST_RUP (RIOC | 122)
+#define RIO_HOST_PORT (RIOC | 123)
+#define RIO_PARMS (RIOC | 124)
+#define RIO_HOST_REQ (RIOC | 125)
+#define RIO_READ_CONFIG (RIOC | 126)
+#define RIO_SET_CONFIG (RIOC | 127)
+#define RIO_VERSID (RIOC | 128)
+#define RIO_FLAGS (RIOC | 129)
+#define RIO_SETDEBUG (RIOC | 130)
+#define RIO_GETDEBUG (RIOC | 131)
+#define RIO_READ_LEVELS (RIOC | 132)
+#define RIO_SET_FAST_BUS (RIOC | 133)
+#define RIO_SET_SLOW_BUS (RIOC | 134)
+#define RIO_SET_BYTE_MODE (RIOC | 135)
+#define RIO_SET_WORD_MODE (RIOC | 136)
+#define RIO_STREAM_INFO (RIOC | 137)
+#define RIO_START_POLLER (RIOC | 138)
+#define RIO_STOP_POLLER (RIOC | 139)
+#define RIO_LAST_ERROR (RIOC | 140)
+#define RIO_TICK (RIOC | 141)
+#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */
+#define RIO_SEND_PACKET (RIOC | 142)
+#define RIO_SET_BUSY (RIOC | 143)
+#define SPECIAL_RUP_CMD (RIOC | 144)
+#define RIO_FOAD_RTA (RIOC | 145)
+#define RIO_ZOMBIE_RTA (RIOC | 146)
+#define RIO_IDENTIFY_RTA (RIOC | 147)
+#define RIO_KILL_NEIGHBOUR (RIOC | 148)
+#define RIO_DEBUG_MEM (RIOC | 149)
+/*
+** 150 - 167 used..... See below
+*/
+#define RIO_GET_PORT_SETUP (RIOC | 168)
+#define RIO_RESUME (RIOC | 169)
+#define RIO_MESG (RIOC | 170)
+#define RIO_NO_MESG (RIOC | 171)
+#define RIO_WHAT_MESG (RIOC | 172)
+#define RIO_HOST_DPRAM (RIOC | 173)
+#define RIO_MAP_B50_TO_50 (RIOC | 174)
+#define RIO_MAP_B50_TO_57600 (RIOC | 175)
+#define RIO_MAP_B110_TO_110 (RIOC | 176)
+#define RIO_MAP_B110_TO_115200 (RIOC | 177)
+#define RIO_GET_PORT_PARAMS (RIOC | 178)
+#define RIO_SET_PORT_PARAMS (RIOC | 179)
+#define RIO_GET_PORT_TTY (RIOC | 180)
+#define RIO_SET_PORT_TTY (RIOC | 181)
+#define RIO_SYSLOG_ONLY (RIOC | 182)
+#define RIO_SYSLOG_CONS (RIOC | 183)
+#define RIO_CONS_ONLY (RIOC | 184)
+#define RIO_BLOCK_OPENS (RIOC | 185)
+
+/*
+** 02.03.1999 ARG - ESIL 0820 fix :
+** RIOBootMode is no longer use by the driver, so these ioctls
+** are now obsolete :
+**
+#define RIO_GET_BOOT_MODE (RIOC | 186)
+#define RIO_SET_BOOT_MODE (RIOC | 187)
+**
+*/
+
+#define RIO_MEM_DUMP (RIOC | 189)
+#define RIO_READ_REGISTER (RIOC | 190)
+#define RIO_GET_MODTYPE (RIOC | 191)
+#define RIO_SET_TIMER (RIOC | 192)
+#define RIO_READ_CHECK (RIOC | 196)
+#define RIO_WAITING_FOR_RESTART (RIOC | 197)
+#define RIO_BIND_RTA (RIOC | 198)
+#define RIO_GET_BINDINGS (RIOC | 199)
+#define RIO_PUT_BINDINGS (RIOC | 200)
+
+#define RIO_MAKE_DEV (RIOC | 201)
+#define RIO_MINOR (RIOC | 202)
+
+#define RIO_IDENTIFY_DRIVER (RIOC | 203)
+#define RIO_DISPLAY_HOST_CFG (RIOC | 204)
+
+
+/*
+** MAKE_DEV / MINOR stuff
+*/
+#define RIO_DEV_DIRECT 0x0000
+#define RIO_DEV_MODEM 0x0200
+#define RIO_DEV_XPRINT 0x0400
+#define RIO_DEV_MASK 0x0600
+
+/*
+** port management, xprint stuff
+*/
+#define rIOCN(N) (RIOC|(N))
+#define rIOCR(N,T) (RIOC|(N))
+#define rIOCW(N,T) (RIOC|(N))
+
+#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */
+#define RIO_SET_XP_ON rIOCW(151,char[16])
+#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */
+#define RIO_SET_XP_OFF rIOCW(153,char[16])
+#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */
+#define RIO_SET_XP_CPS rIOCW(155,int)
+#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */
+#define RIO_SET_IXANY rIOCW(157,int)
+#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */
+#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */
+#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */
+#define RIO_SET_MODEM rIOCW(161,int)
+#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */
+#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */
+#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */
+#define RIO_SET_IXON rIOCW(165,int)
+#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */
+#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */
+
+#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */
+
+#define RIO_IOCTL_UNKNOWN -2
+
+#endif
OpenPOWER on IntegriCloud