diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_poweroff.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_poweroff.c | 752 |
1 files changed, 752 insertions, 0 deletions
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c new file mode 100644 index 0000000..a261bd7 --- /dev/null +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -0,0 +1,752 @@ +/* + * ipmi_poweroff.c + * + * MontaVista IPMI Poweroff extension to sys_reboot + * + * Author: MontaVista Software, Inc. + * Steven Dake <sdake@mvista.com> + * Corey Minyard <cminyard@mvista.com> + * source@mvista.com + * + * Copyright 2002,2004 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/proc_fs.h> +#include <linux/string.h> +#include <linux/completion.h> +#include <linux/pm.h> +#include <linux/kdev_t.h> +#include <linux/ipmi.h> +#include <linux/ipmi_smi.h> + +#define PFX "IPMI poweroff: " + +static void ipmi_po_smi_gone(int if_num); +static void ipmi_po_new_smi(int if_num, struct device *device); + +/* Definitions for controlling power off (if the system supports it). It + * conveniently matches the IPMI chassis control values. */ +#define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */ +#define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */ + +/* the IPMI data command */ +static int poweroff_powercycle; + +/* Which interface to use, -1 means the first we see. */ +static int ifnum_to_use = -1; + +/* Our local state. */ +static int ready; +static ipmi_user_t ipmi_user; +static int ipmi_ifnum; +static void (*specific_poweroff_func)(ipmi_user_t user); + +/* Holds the old poweroff function so we can restore it on removal. */ +static void (*old_poweroff_func)(void); + +static int set_param_ifnum(const char *val, struct kernel_param *kp) +{ + int rv = param_set_int(val, kp); + if (rv) + return rv; + if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum)) + return 0; + + ipmi_po_smi_gone(ipmi_ifnum); + ipmi_po_new_smi(ifnum_to_use, NULL); + return 0; +} + +module_param_call(ifnum_to_use, set_param_ifnum, param_get_int, + &ifnum_to_use, 0644); +MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " + "timer. Setting to -1 defaults to the first registered " + "interface"); + +/* parameter definition to allow user to flag power cycle */ +module_param(poweroff_powercycle, int, 0644); +MODULE_PARM_DESC(poweroff_powercycle, + " Set to non-zero to enable power cycle instead of power" + " down. Power cycle is contingent on hardware support," + " otherwise it defaults back to power down."); + +/* Stuff from the get device id command. */ +static unsigned int mfg_id; +static unsigned int prod_id; +static unsigned char capabilities; +static unsigned char ipmi_version; + +/* + * We use our own messages for this operation, we don't let the system + * allocate them, since we may be in a panic situation. The whole + * thing is single-threaded, anyway, so multiple messages are not + * required. + */ +static atomic_t dummy_count = ATOMIC_INIT(0); +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ + atomic_dec(&dummy_count); +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ + atomic_dec(&dummy_count); +} +static struct ipmi_smi_msg halt_smi_msg = { + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = { + .done = dummy_recv_free +}; + + +/* + * Code to send a message and wait for the reponse. + */ + +static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) +{ + struct completion *comp = recv_msg->user_msg_data; + + if (comp) + complete(comp); +} + +static struct ipmi_user_hndl ipmi_poweroff_handler = { + .ipmi_recv_hndl = receive_handler +}; + + +static int ipmi_request_wait_for_response(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + struct completion comp; + + init_completion(&comp); + + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) + return rv; + + wait_for_completion(&comp); + + return halt_recv_msg.msg.data[0]; +} + +/* Wait for message to complete, spinning. */ +static int ipmi_request_in_rc_mode(ipmi_user_t user, + struct ipmi_addr *addr, + struct kernel_ipmi_msg *send_msg) +{ + int rv; + + atomic_set(&dummy_count, 2); + rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, + &halt_smi_msg, &halt_recv_msg, 0); + if (rv) { + atomic_set(&dummy_count, 0); + return rv; + } + + /* + * Spin until our message is done. + */ + while (atomic_read(&dummy_count) > 0) { + ipmi_poll_interface(user); + cpu_relax(); + } + + return halt_recv_msg.msg.data[0]; +} + +/* + * ATCA Support + */ + +#define IPMI_NETFN_ATCA 0x2c +#define IPMI_ATCA_SET_POWER_CMD 0x11 +#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01 +#define IPMI_PICMG_ID 0 + +#define IPMI_NETFN_OEM 0x2e +#define IPMI_ATCA_PPS_GRACEFUL_RESTART 0x11 +#define IPMI_ATCA_PPS_IANA "\x00\x40\x0A" +#define IPMI_MOTOROLA_MANUFACTURER_ID 0x0000A1 +#define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID 0x0051 + +static void (*atca_oem_poweroff_hook)(ipmi_user_t user); + +static void pps_poweroff_atca(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "PPS powerdown hook used"); + + send_msg.netfn = IPMI_NETFN_OEM; + send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; + send_msg.data = IPMI_ATCA_PPS_IANA; + send_msg.data_len = 3; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA ," + " IPMI error 0x%x\n", rv); + } + return; +} + +static int ipmi_atca_detect(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + /* + * Use get address info to check and see if we are ATCA + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD; + data[0] = IPMI_PICMG_ID; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_wait_for_response(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + + printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", + mfg_id, prod_id); + if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) + && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { + printk(KERN_INFO PFX + "Installing Pigeon Point Systems Poweroff Hook\n"); + atca_oem_poweroff_hook = pps_poweroff_atca; + } + return !rv; +} + +static void ipmi_poweroff_atca(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[4]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via ATCA power command\n"); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_ATCA; + send_msg.cmd = IPMI_ATCA_SET_POWER_CMD; + data[0] = IPMI_PICMG_ID; + data[1] = 0; /* FRU id */ + data[2] = 0; /* Power Level */ + data[3] = 0; /* Don't change saved presets */ + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + /* + * At this point, the system may be shutting down, and most + * serial drivers (if used) will have interrupts turned off + * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE + * return code + */ + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA powerdown message," + " IPMI error 0x%x\n", rv); + goto out; + } + + if (atca_oem_poweroff_hook) + atca_oem_poweroff_hook(user); + out: + return; +} + +/* + * CPI1 Support + */ + +#define IPMI_NETFN_OEM_1 0xf8 +#define OEM_GRP_CMD_SET_RESET_STATE 0x84 +#define OEM_GRP_CMD_SET_POWER_STATE 0x82 +#define IPMI_NETFN_OEM_8 0xf8 +#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80 +#define OEM_GRP_CMD_GET_SLOT_GA 0xa3 +#define IPMI_NETFN_SENSOR_EVT 0x10 +#define IPMI_CMD_GET_EVENT_RECEIVER 0x01 + +#define IPMI_CPI1_PRODUCT_ID 0x000157 +#define IPMI_CPI1_MANUFACTURER_ID 0x0108 + +static int ipmi_cpi1_detect(ipmi_user_t user) +{ + return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) + && (prod_id == IPMI_CPI1_PRODUCT_ID)); +} + +static void ipmi_poweroff_cpi1(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct ipmi_ipmb_addr ipmb_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + int slot; + unsigned char hotswap_ipmb; + unsigned char aer_addr; + unsigned char aer_lun; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); + + /* + * Get IPMI ipmb address + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + slot = halt_recv_msg.msg.data[1]; + hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot); + + /* + * Get active event receiver + */ + send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2; + send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + aer_addr = halt_recv_msg.msg.data[1]; + aer_lun = halt_recv_msg.msg.data[2]; + + /* + * Setup IPMB address target instead of local target + */ + ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE; + ipmb_addr.channel = 0; + ipmb_addr.slave_addr = aer_addr; + ipmb_addr.lun = aer_lun; + + /* + * Send request hotswap control to remove blade from dpv + */ + send_msg.netfn = IPMI_NETFN_OEM_8 >> 2; + send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL; + send_msg.data = &hotswap_ipmb; + send_msg.data_len = 1; + ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &ipmb_addr, + &send_msg); + + /* + * Set reset asserted + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE; + send_msg.data = data; + data[0] = 1; /* Reset asserted state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_OEM_1 >> 2; + send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE; + send_msg.data = data; + data[0] = 1; /* Power down state */ + send_msg.data_len = 1; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) + goto out; + + out: + return; +} + +/* + * ipmi_dell_chassis_detect() + * Dell systems with IPMI < 1.5 don't set the chassis capability bit + * but they can handle a chassis poweroff or powercycle command. + */ + +#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} +static int ipmi_dell_chassis_detect(ipmi_user_t user) +{ + const char ipmi_version_major = ipmi_version & 0xF; + const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; + const char mfr[3] = DELL_IANA_MFR_ID; + if (!memcmp(mfr, &mfg_id, sizeof(mfr)) && + ipmi_version_major <= 1 && + ipmi_version_minor < 5) + return 1; + return 0; +} + +/* + * Standard chassis support + */ + +#define IPMI_NETFN_CHASSIS_REQUEST 0 +#define IPMI_CHASSIS_CONTROL_CMD 0x02 + +static int ipmi_chassis_detect(ipmi_user_t user) +{ + /* Chassis support, use it. */ + return (capabilities & 0x80); +} + +static void ipmi_poweroff_chassis(ipmi_user_t user) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + unsigned char data[1]; + + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + powercyclefailed: + printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", + (poweroff_powercycle ? "cycle" : "down")); + + /* + * Power down + */ + send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST; + send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD; + if (poweroff_powercycle) + data[0] = IPMI_CHASSIS_POWER_CYCLE; + else + data[0] = IPMI_CHASSIS_POWER_DOWN; + send_msg.data = data; + send_msg.data_len = sizeof(data); + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + if (poweroff_powercycle) { + /* power cycle failed, default to power down */ + printk(KERN_ERR PFX "Unable to send chassis power " \ + "cycle message, IPMI error 0x%x\n", rv); + poweroff_powercycle = 0; + goto powercyclefailed; + } + + printk(KERN_ERR PFX "Unable to send chassis power " \ + "down message, IPMI error 0x%x\n", rv); + } +} + + +/* Table of possible power off functions. */ +struct poweroff_function { + char *platform_type; + int (*detect)(ipmi_user_t user); + void (*poweroff_func)(ipmi_user_t user); +}; + +static struct poweroff_function poweroff_functions[] = { + { .platform_type = "ATCA", + .detect = ipmi_atca_detect, + .poweroff_func = ipmi_poweroff_atca }, + { .platform_type = "CPI1", + .detect = ipmi_cpi1_detect, + .poweroff_func = ipmi_poweroff_cpi1 }, + { .platform_type = "chassis", + .detect = ipmi_dell_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, + /* Chassis should generally be last, other things should override + it. */ + { .platform_type = "chassis", + .detect = ipmi_chassis_detect, + .poweroff_func = ipmi_poweroff_chassis }, +}; +#define NUM_PO_FUNCS (sizeof(poweroff_functions) \ + / sizeof(struct poweroff_function)) + + +/* Called on a powerdown request. */ +static void ipmi_poweroff_function(void) +{ + if (!ready) + return; + + /* Use run-to-completion mode, since interrupts may be off. */ + specific_poweroff_func(ipmi_user); +} + +/* Wait for an IPMI interface to be installed, the first one installed + will be grabbed by this code and used to perform the powerdown. */ +static void ipmi_po_new_smi(int if_num, struct device *device) +{ + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + int i; + + if (ready) + return; + + if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num)) + return; + + rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL, + &ipmi_user); + if (rv) { + printk(KERN_ERR PFX "could not create IPMI user, error %d\n", + rv); + return; + } + + ipmi_ifnum = if_num; + + /* + * Do a get device ide and store some results, since this is + * used by several functions. + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + send_msg.netfn = IPMI_NETFN_APP_REQUEST; + send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; + send_msg.data = NULL; + send_msg.data_len = 0; + rv = ipmi_request_wait_for_response(ipmi_user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv) { + printk(KERN_ERR PFX "Unable to send IPMI get device id info," + " IPMI error 0x%x\n", rv); + goto out_err; + } + + if (halt_recv_msg.msg.data_len < 12) { + printk(KERN_ERR PFX "(chassis) IPMI get device id info too," + " short, was %d bytes, needed %d bytes\n", + halt_recv_msg.msg.data_len, 12); + goto out_err; + } + + mfg_id = (halt_recv_msg.msg.data[7] + | (halt_recv_msg.msg.data[8] << 8) + | (halt_recv_msg.msg.data[9] << 16)); + prod_id = (halt_recv_msg.msg.data[10] + | (halt_recv_msg.msg.data[11] << 8)); + capabilities = halt_recv_msg.msg.data[6]; + ipmi_version = halt_recv_msg.msg.data[5]; + + + /* Scan for a poweroff method */ + for (i = 0; i < NUM_PO_FUNCS; i++) { + if (poweroff_functions[i].detect(ipmi_user)) + goto found; + } + + out_err: + printk(KERN_ERR PFX "Unable to find a poweroff function that" + " will work, giving up\n"); + ipmi_destroy_user(ipmi_user); + return; + + found: + printk(KERN_INFO PFX "Found a %s style poweroff function\n", + poweroff_functions[i].platform_type); + specific_poweroff_func = poweroff_functions[i].poweroff_func; + old_poweroff_func = pm_power_off; + pm_power_off = ipmi_poweroff_function; + ready = 1; +} + +static void ipmi_po_smi_gone(int if_num) +{ + if (!ready) + return; + + if (ipmi_ifnum != if_num) + return; + + ready = 0; + ipmi_destroy_user(ipmi_user); + pm_power_off = old_poweroff_func; +} + +static struct ipmi_smi_watcher smi_watcher = { + .owner = THIS_MODULE, + .new_smi = ipmi_po_new_smi, + .smi_gone = ipmi_po_smi_gone +}; + + +#ifdef CONFIG_PROC_FS +#include <linux/sysctl.h> + +static ctl_table ipmi_table[] = { + { .ctl_name = DEV_IPMI_POWEROFF_POWERCYCLE, + .procname = "poweroff_powercycle", + .data = &poweroff_powercycle, + .maxlen = sizeof(poweroff_powercycle), + .mode = 0644, + .proc_handler = &proc_dointvec }, + { } +}; + +static ctl_table ipmi_dir_table[] = { + { .ctl_name = DEV_IPMI, + .procname = "ipmi", + .mode = 0555, + .child = ipmi_table }, + { } +}; + +static ctl_table ipmi_root_table[] = { + { .ctl_name = CTL_DEV, + .procname = "dev", + .mode = 0555, + .child = ipmi_dir_table }, + { } +}; + +static struct ctl_table_header *ipmi_table_header; +#endif /* CONFIG_PROC_FS */ + +/* + * Startup and shutdown functions. + */ +static int ipmi_poweroff_init(void) +{ + int rv; + + printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" + " IPMI Powerdown via sys_reboot.\n"); + + if (poweroff_powercycle) + printk(KERN_INFO PFX "Power cycle is enabled.\n"); + +#ifdef CONFIG_PROC_FS + ipmi_table_header = register_sysctl_table(ipmi_root_table); + if (!ipmi_table_header) { + printk(KERN_ERR PFX "Unable to register powercycle sysctl\n"); + rv = -ENOMEM; + goto out_err; + } +#endif + + rv = ipmi_smi_watcher_register(&smi_watcher); + +#ifdef CONFIG_PROC_FS + if (rv) { + unregister_sysctl_table(ipmi_table_header); + printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv); + goto out_err; + } + + out_err: +#endif + return rv; +} + +#ifdef MODULE +static __exit void ipmi_poweroff_cleanup(void) +{ + int rv; + +#ifdef CONFIG_PROC_FS + unregister_sysctl_table(ipmi_table_header); +#endif + + ipmi_smi_watcher_unregister(&smi_watcher); + + if (ready) { + rv = ipmi_destroy_user(ipmi_user); + if (rv) + printk(KERN_ERR PFX "could not cleanup the IPMI" + " user: 0x%x\n", rv); + pm_power_off = old_poweroff_func; + } +} +module_exit(ipmi_poweroff_cleanup); +#endif + +module_init(ipmi_poweroff_init); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot"); |
