summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_winbond.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_winbond.c')
-rw-r--r--drivers/ata/pata_winbond.c282
1 files changed, 282 insertions, 0 deletions
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
new file mode 100644
index 0000000..319e164
--- /dev/null
+++ b/drivers/ata/pata_winbond.c
@@ -0,0 +1,282 @@
+/*
+ * pata_winbond.c - Winbond VLB ATA controllers
+ * (C) 2006 Red Hat
+ *
+ * Support for the Winbond 83759A when operating in advanced mode.
+ * Multichip mode is not currently supported.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_winbond"
+#define DRV_VERSION "0.0.3"
+
+#define NR_HOST 4 /* Two winbond controllers, two channels each */
+
+struct winbond_data {
+ unsigned long config;
+ struct platform_device *platform_dev;
+};
+
+static struct ata_host *winbond_host[NR_HOST];
+static struct winbond_data winbond_data[NR_HOST];
+static int nr_winbond_host;
+
+#ifdef MODULE
+static int probe_winbond = 1;
+#else
+static int probe_winbond;
+#endif
+
+static DEFINE_SPINLOCK(winbond_lock);
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ outb(val, port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+ u8 val;
+
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ val = inb(port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+
+ return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct winbond_data *winbond = ap->host->private_data;
+ int active, recovery;
+ u8 reg;
+ int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+ reg = winbond_readcfg(winbond->config, 0x81);
+
+ /* Get the timing data in cycles */
+ if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+ else
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
+ timing = (active << 4) | recovery;
+ winbond_writecfg(winbond->config, timing, reg);
+
+ /* Load the setup timing */
+
+ reg = 0x35;
+ if (adev->class != ATA_DEV_ATA)
+ reg |= 0x08; /* FIFO off */
+ if (!ata_pio_need_iordy(adev))
+ reg |= 0x02; /* IORDY off */
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
+ winbond_writecfg(winbond->config, timing + 1, reg);
+}
+
+
+static unsigned int winbond_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
+
+ if (ata_id_has_dword_io(dev->id)) {
+ if (rw == READ)
+ ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+ if (unlikely(slop)) {
+ __le32 pad;
+ if (rw == READ) {
+ pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
+ memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ }
+ buflen += 4 - slop;
+ }
+ } else
+ buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+ return buflen;
+}
+
+static struct scsi_host_template winbond_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations winbond_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = winbond_data_xfer,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = winbond_set_piomode,
+};
+
+/**
+ * winbond_init_one - attach a winbond interface
+ * @type: Type to display
+ * @io: I/O port start
+ * @irq: interrupt line
+ * @fast: True if on a > 33Mhz VLB
+ *
+ * Register a VLB bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int winbond_init_one(unsigned long port)
+{
+ struct platform_device *pdev;
+ u8 reg;
+ int i, rc;
+
+ reg = winbond_readcfg(port, 0x81);
+ reg |= 0x80; /* jumpered mode off */
+ winbond_writecfg(port, 0x81, reg);
+ reg = winbond_readcfg(port, 0x83);
+ reg |= 0xF0; /* local control */
+ winbond_writecfg(port, 0x83, reg);
+ reg = winbond_readcfg(port, 0x85);
+ reg |= 0xF0; /* programmable timing */
+ winbond_writecfg(port, 0x85, reg);
+
+ reg = winbond_readcfg(port, 0x81);
+
+ if (!(reg & 0x03)) /* Disabled */
+ return -ENODEV;
+
+ for (i = 0; i < 2 ; i ++) {
+ unsigned long cmd_port = 0x1F0 - (0x80 * i);
+ unsigned long ctl_port = cmd_port + 0x206;
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *cmd_addr, *ctl_addr;
+
+ if (!(reg & (1 << i)))
+ continue;
+
+ pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ rc = -ENOMEM;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto err_unregister;
+ ap = host->ports[0];
+
+ rc = -ENOMEM;
+ cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
+ ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
+ if (!cmd_addr || !ctl_addr)
+ goto err_unregister;
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
+
+ ap->ops = &winbond_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = cmd_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* hook in a private data structure per channel */
+ host->private_data = &winbond_data[nr_winbond_host];
+ winbond_data[nr_winbond_host].config = port;
+ winbond_data[nr_winbond_host].platform_dev = pdev;
+
+ /* activate */
+ rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
+ &winbond_sht);
+ if (rc)
+ goto err_unregister;
+
+ winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
+ }
+
+ return 0;
+
+ err_unregister:
+ platform_device_unregister(pdev);
+ return rc;
+}
+
+/**
+ * winbond_init - attach winbond interfaces
+ *
+ * Attach winbond IDE interfaces by scanning the ports it may occupy.
+ */
+
+static __init int winbond_init(void)
+{
+ static const unsigned long config[2] = { 0x130, 0x1B0 };
+
+ int ct = 0;
+ int i;
+
+ if (probe_winbond == 0)
+ return -ENODEV;
+
+ /*
+ * Check both base addresses
+ */
+
+ for (i = 0; i < 2; i++) {
+ if (probe_winbond & (1<<i)) {
+ int ret = 0;
+ unsigned long port = config[i];
+
+ if (request_region(port, 2, "pata_winbond")) {
+ ret = winbond_init_one(port);
+ if (ret <= 0)
+ release_region(port, 2);
+ else ct+= ret;
+ }
+ }
+ }
+ if (ct != 0)
+ return 0;
+ return -ENODEV;
+}
+
+static __exit void winbond_exit(void)
+{
+ int i;
+
+ for (i = 0; i < nr_winbond_host; i++) {
+ ata_host_detach(winbond_host[i]);
+ release_region(winbond_data[i].config, 2);
+ platform_device_unregister(winbond_data[i].platform_dev);
+ }
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_init(winbond_init);
+module_exit(winbond_exit);
+
+module_param(probe_winbond, int, 0);
+
OpenPOWER on IntegriCloud