summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_legacy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r--drivers/ata/pata_legacy.c1296
1 files changed, 1296 insertions, 0 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
new file mode 100644
index 0000000..930c220
--- /dev/null
+++ b/drivers/ata/pata_legacy.c
@@ -0,0 +1,1296 @@
+/*
+ * pata-legacy.c - Legacy port PATA/SATA controller driver.
+ * Copyright 2005/2006 Red Hat, all rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * An ATA driver for the legacy ATA ports.
+ *
+ * Data Sources:
+ * Opti 82C465/82C611 support: Data sheets at opti-inc.com
+ * HT6560 series:
+ * Promise 20230/20620:
+ * http://www.ryston.cz/petr/vlb/pdc20230b.html
+ * http://www.ryston.cz/petr/vlb/pdc20230c.html
+ * http://www.ryston.cz/petr/vlb/pdc20630.html
+ *
+ * Unsupported but docs exist:
+ * Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
+ *
+ * This driver handles legacy (that is "ISA/VLB side") IDE ports found
+ * on PC class systems. There are three hybrid devices that are exceptions
+ * The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and
+ * the MPIIX where the tuning is PCI side but the IDE is "ISA side".
+ *
+ * Specific support is included for the ht6560a/ht6560b/opti82c611a/
+ * opti82c465mv/promise 20230c/20630/winbond83759A
+ *
+ * Use the autospeed and pio_mask options with:
+ * Appian ADI/2 aka CLPD7220 or AIC25VL01.
+ * Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
+ * Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759,
+ * Winbond W83759A, Promise PDC20230-B
+ *
+ * For now use autospeed and pio_mask as above with the W83759A. This may
+ * change.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_legacy"
+#define DRV_VERSION "0.6.5"
+
+#define NR_HOST 6
+
+static int all;
+module_param(all, int, 0444);
+MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
+
+struct legacy_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ struct platform_device *platform_dev;
+
+};
+
+enum controller {
+ BIOS = 0,
+ SNOOP = 1,
+ PDC20230 = 2,
+ HT6560A = 3,
+ HT6560B = 4,
+ OPTI611A = 5,
+ OPTI46X = 6,
+ QDI6500 = 7,
+ QDI6580 = 8,
+ QDI6580DP = 9, /* Dual channel mode is different */
+ W83759A = 10,
+
+ UNKNOWN = -1
+};
+
+
+struct legacy_probe {
+ unsigned char *name;
+ unsigned long port;
+ unsigned int irq;
+ unsigned int slot;
+ enum controller type;
+ unsigned long private;
+};
+
+struct legacy_controller {
+ const char *name;
+ struct ata_port_operations *ops;
+ unsigned int pio_mask;
+ unsigned int flags;
+ int (*setup)(struct platform_device *, struct legacy_probe *probe,
+ struct legacy_data *data);
+};
+
+static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+
+static struct legacy_probe probe_list[NR_HOST];
+static struct legacy_data legacy_data[NR_HOST];
+static struct ata_host *legacy_host[NR_HOST];
+static int nr_legacy_host;
+
+
+static int probe_all; /* Set to check all ISA port ranges */
+static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
+static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
+static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
+static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
+static int qdi; /* Set to probe QDI controllers */
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+static int autospeed; /* Chip present which snoops speed changes */
+static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+
+/**
+ * legacy_probe_add - Add interface to probe list
+ * @port: Controller port
+ * @irq: IRQ number
+ * @type: Controller type
+ * @private: Controller specific info
+ *
+ * Add an entry into the probe list for ATA controllers. This is used
+ * to add the default ISA slots and then to build up the table
+ * further according to other ISA/VLB/Weird device scans
+ *
+ * An I/O port list is used to keep ordering stable and sane, as we
+ * don't have any good way to talk about ordering otherwise
+ */
+
+static int legacy_probe_add(unsigned long port, unsigned int irq,
+ enum controller type, unsigned long private)
+{
+ struct legacy_probe *lp = &probe_list[0];
+ int i;
+ struct legacy_probe *free = NULL;
+
+ for (i = 0; i < NR_HOST; i++) {
+ if (lp->port == 0 && free == NULL)
+ free = lp;
+ /* Matching port, or the correct slot for ordering */
+ if (lp->port == port || legacy_port[i] == port) {
+ free = lp;
+ break;
+ }
+ lp++;
+ }
+ if (free == NULL) {
+ printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
+ return -1;
+ }
+ /* Fill in the entry for later probing */
+ free->port = port;
+ free->irq = irq;
+ free->type = type;
+ free->private = private;
+ return 0;
+}
+
+
+/**
+ * legacy_set_mode - mode setting
+ * @link: IDE link
+ * @unused: Device that failed when error is returned
+ *
+ * Use a non standard set_mode function. We don't want to be tuned.
+ *
+ * The BIOS configured everything. Our job is not to fiddle. Just use
+ * whatever PIO the hardware is using and leave it at that. When we
+ * get some kind of nice user driven API for control then we can
+ * expand on this as per hdparm in the base kernel.
+ */
+
+static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
+{
+ struct ata_device *dev;
+
+ ata_link_for_each_dev(dev, link) {
+ if (ata_dev_enabled(dev)) {
+ ata_dev_printk(dev, KERN_INFO,
+ "configured for PIO\n");
+ dev->pio_mode = XFER_PIO_0;
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
+ }
+ }
+ return 0;
+}
+
+static struct scsi_host_template legacy_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static const struct ata_port_operations legacy_base_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .cable_detect = ata_cable_40wire,
+};
+
+/*
+ * These ops are used if the user indicates the hardware
+ * snoops the commands to decide on the mode and handles the
+ * mode selection "magically" itself. Several legacy controllers
+ * do this. The mode range can be set if it is not 0x1F by setting
+ * pio_mask as well.
+ */
+
+static struct ata_port_operations simple_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+};
+
+static struct ata_port_operations legacy_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .set_mode = legacy_set_mode,
+};
+
+/*
+ * Promise 20230C and 20620 support
+ *
+ * This controller supports PIO0 to PIO2. We set PIO timings
+ * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA
+ * support is weird being DMA to controller and PIO'd to the host
+ * and not supported.
+ */
+
+static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ int tries = 5;
+ int pio = adev->pio_mode - XFER_PIO_0;
+ u8 rt;
+ unsigned long flags;
+
+ /* Safe as UP only. Force I/Os to occur together */
+
+ local_irq_save(flags);
+
+ /* Unlock the control interface */
+ do {
+ inb(0x1F5);
+ outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F2);
+ inb(0x3F6);
+ inb(0x3F6);
+ inb(0x1F2);
+ inb(0x1F2);
+ }
+ while ((inb(0x1F2) & 0x80) && --tries);
+
+ local_irq_restore(flags);
+
+ outb(inb(0x1F4) & 0x07, 0x1F4);
+
+ rt = inb(0x1F3);
+ rt &= 0x07 << (3 * adev->devno);
+ if (pio)
+ rt |= (1 + 3 * pio) << (3 * adev->devno);
+
+ udelay(100);
+ outb(inb(0x1F2) | 0x01, 0x1F2);
+ udelay(100);
+ inb(0x1F5);
+
+}
+
+static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
+{
+ if (ata_id_has_dword_io(dev->id)) {
+ struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Perform the 32bit I/O synchronization sequence */
+ ioread8(ap->ioaddr.nsect_addr);
+ ioread8(ap->ioaddr.nsect_addr);
+ ioread8(ap->ioaddr.nsect_addr);
+
+ /* Now the data */
+ if (rw == READ)
+ ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+ if (unlikely(slop)) {
+ __le32 pad;
+ if (rw == READ) {
+ pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
+ memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ }
+ buflen += 4 - slop;
+ }
+ local_irq_restore(flags);
+ } else
+ buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
+
+ return buflen;
+}
+
+static struct ata_port_operations pdc20230_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = pdc20230_set_piomode,
+ .sff_data_xfer = pdc_data_xfer_vlb,
+};
+
+/*
+ * Holtek 6560A support
+ *
+ * This controller supports PIO0 to PIO2 (no IORDY even though higher
+ * timings can be loaded).
+ */
+
+static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover;
+ struct ata_timing t;
+
+ /* Get the timing data in cycles. For now play safe at 50Mhz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 4, 15);
+
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+
+ iowrite8(recover << 4 | active, ap->ioaddr.device_addr);
+ ioread8(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560a_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = ht6560a_set_piomode,
+};
+
+/*
+ * Holtek 6560B support
+ *
+ * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO
+ * setting unless we see an ATAPI device in which case we force it off.
+ *
+ * FIXME: need to implement 2nd channel support.
+ */
+
+static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover;
+ struct ata_timing t;
+
+ /* Get the timing data in cycles. For now play safe at 50Mhz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 2, 16);
+ recover &= 0x15;
+
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+ inb(0x3E6);
+
+ iowrite8(recover << 4 | active, ap->ioaddr.device_addr);
+
+ if (adev->class != ATA_DEV_ATA) {
+ u8 rconf = inb(0x3E6);
+ if (rconf & 0x24) {
+ rconf &= ~0x24;
+ outb(rconf, 0x3E6);
+ }
+ }
+ ioread8(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560b_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = ht6560b_set_piomode,
+};
+
+/*
+ * Opti core chipset helpers
+ */
+
+/**
+ * opti_syscfg - read OPTI chipset configuration
+ * @reg: Configuration register to read
+ *
+ * Returns the value of an OPTI system board configuration register.
+ */
+
+static u8 opti_syscfg(u8 reg)
+{
+ unsigned long flags;
+ u8 r;
+
+ /* Uniprocessor chipset and must force cycles adjancent */
+ local_irq_save(flags);
+ outb(reg, 0x22);
+ r = inb(0x24);
+ local_irq_restore(flags);
+ return r;
+}
+
+/*
+ * Opti 82C611A
+ *
+ * This controller supports PIO0 to PIO3.
+ */
+
+static void opti82c611a_set_piomode(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ u8 active, recover, setup;
+ struct ata_timing t;
+ struct ata_device *pair = ata_dev_pair(adev);
+ int clock;
+ int khz[4] = { 50000, 40000, 33000, 25000 };
+ u8 rc;
+
+ /* Enter configuration mode */
+ ioread16(ap->ioaddr.error_addr);
+ ioread16(ap->ioaddr.error_addr);
+ iowrite8(3, ap->ioaddr.nsect_addr);
+
+ /* Read VLB clock strapping */
+ clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03];
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+ /* Setup timing is shared */
+ if (pair) {
+ struct ata_timing tp;
+ ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+ ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ }
+
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
+
+ /* Select the right timing bank for write timing */
+ rc = ioread8(ap->ioaddr.lbal_addr);
+ rc &= 0x7F;
+ rc |= (adev->devno << 7);
+ iowrite8(rc, ap->ioaddr.lbal_addr);
+
+ /* Write the timings */
+ iowrite8(active << 4 | recover, ap->ioaddr.error_addr);
+
+ /* Select the right bank for read timings, also
+ load the shared timings for address */
+ rc = ioread8(ap->ioaddr.device_addr);
+ rc &= 0xC0;
+ rc |= adev->devno; /* Index select */
+ rc |= (setup << 4) | 0x04;
+ iowrite8(rc, ap->ioaddr.device_addr);
+
+ /* Load the read timings */
+ iowrite8(active << 4 | recover, ap->ioaddr.data_addr);
+
+ /* Ensure the timing register mode is right */
+ rc = ioread8(ap->ioaddr.lbal_addr);
+ rc &= 0x73;
+ rc |= 0x84;
+ iowrite8(rc, ap->ioaddr.lbal_addr);
+
+ /* Exit command mode */
+ iowrite8(0x83, ap->ioaddr.nsect_addr);
+}
+
+
+static struct ata_port_operations opti82c611a_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = opti82c611a_set_piomode,
+};
+
+/*
+ * Opti 82C465MV
+ *
+ * This controller supports PIO0 to PIO3. Unlike the 611A the MVB
+ * version is dual channel but doesn't have a lot of unique registers.
+ */
+
+static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ u8 active, recover, setup;
+ struct ata_timing t;
+ struct ata_device *pair = ata_dev_pair(adev);
+ int clock;
+ int khz[4] = { 50000, 40000, 33000, 25000 };
+ u8 rc;
+ u8 sysclk;
+
+ /* Get the clock */
+ sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */
+
+ /* Enter configuration mode */
+ ioread16(ap->ioaddr.error_addr);
+ ioread16(ap->ioaddr.error_addr);
+ iowrite8(3, ap->ioaddr.nsect_addr);
+
+ /* Read VLB clock strapping */
+ clock = 1000000000 / khz[sysclk];
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+ /* Setup timing is shared */
+ if (pair) {
+ struct ata_timing tp;
+ ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+ ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+ }
+
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
+
+ /* Select the right timing bank for write timing */
+ rc = ioread8(ap->ioaddr.lbal_addr);
+ rc &= 0x7F;
+ rc |= (adev->devno << 7);
+ iowrite8(rc, ap->ioaddr.lbal_addr);
+
+ /* Write the timings */
+ iowrite8(active << 4 | recover, ap->ioaddr.error_addr);
+
+ /* Select the right bank for read timings, also
+ load the shared timings for address */
+ rc = ioread8(ap->ioaddr.device_addr);
+ rc &= 0xC0;
+ rc |= adev->devno; /* Index select */
+ rc |= (setup << 4) | 0x04;
+ iowrite8(rc, ap->ioaddr.device_addr);
+
+ /* Load the read timings */
+ iowrite8(active << 4 | recover, ap->ioaddr.data_addr);
+
+ /* Ensure the timing register mode is right */
+ rc = ioread8(ap->ioaddr.lbal_addr);
+ rc &= 0x73;
+ rc |= 0x84;
+ iowrite8(rc, ap->ioaddr.lbal_addr);
+
+ /* Exit command mode */
+ iowrite8(0x83, ap->ioaddr.nsect_addr);
+
+ /* We need to know this for quad device on the MVB */
+ ap->host->private_data = ap;
+}
+
+/**
+ * opt82c465mv_qc_issue - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings. The
+ * MVB has a single set of timing registers and these are shared
+ * across channels. As there are two registers we really ought to
+ * track the last two used values as a sort of register window. For
+ * now we just reload on a channel switch. On the single channel
+ * setup this condition never fires so we do nothing extra.
+ *
+ * FIXME: dual channel needs ->serialize support
+ */
+
+static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+
+ /* If timings are set and for the wrong channel (2nd test is
+ due to a libata shortcoming and will eventually go I hope) */
+ if (ap->host->private_data != ap->host
+ && ap->host->private_data != NULL)
+ opti82c46x_set_piomode(ap, adev);
+
+ return ata_sff_qc_issue(qc);
+}
+
+static struct ata_port_operations opti82c46x_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = opti82c46x_set_piomode,
+ .qc_issue = opti82c46x_qc_issue,
+};
+
+static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
+ } else {
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ ld_qdi->clock[adev->devno] = timing;
+
+ outb(timing, ld_qdi->timing);
+}
+
+/**
+ * qdi6580dp_set_piomode - PIO setup for dual channel
+ * @ap: Port
+ * @adev: Device
+ * @irq: interrupt line
+ *
+ * In dual channel mode the 6580 has one clock per channel and we have
+ * to software clockswitch in qc_issue.
+ */
+
+static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
+ } else {
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ ld_qdi->clock[adev->devno] = timing;
+
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, ld_qdi->timing + 3);
+}
+
+/**
+ * qdi6580_set_piomode - PIO setup for single channel
+ * @ap: Port
+ * @adev: Device
+ *
+ * In single channel mode the 6580 has one clock per device and we can
+ * avoid the requirement to clock switch. We also have to load the timing
+ * into the right clock according to whether we are master or slave.
+ */
+
+static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (ld_qdi->fast) {
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
+ } else {
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+ ld_qdi->clock[adev->devno] = timing;
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, ld_qdi->timing + 3);
+}
+
+/**
+ * qdi_qc_issue - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings.
+ */
+
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct legacy_data *ld_qdi = ap->host->private_data;
+
+ if (ld_qdi->clock[adev->devno] != ld_qdi->last) {
+ if (adev->pio_mode) {
+ ld_qdi->last = ld_qdi->clock[adev->devno];
+ outb(ld_qdi->clock[adev->devno], ld_qdi->timing +
+ 2 * ap->port_no);
+ }
+ }
+ return ata_sff_qc_issue(qc);
+}
+
+static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_port *ap = adev->link->ap;
+ int slop = buflen & 3;
+
+ if (ata_id_has_dword_io(adev->id)) {
+ if (rw == WRITE)
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+ if (unlikely(slop)) {
+ __le32 pad;
+ if (rw == WRITE) {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+ } else {
+ pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
+ memcpy(buf + buflen - slop, &pad, slop);
+ }
+ }
+ return (buflen + 3) & ~3;
+ } else
+ return ata_sff_data_xfer(adev, buf, buflen, rw);
+}
+
+static int qdi_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations qdi6500_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = qdi6500_set_piomode,
+ .qc_issue = qdi_qc_issue,
+ .sff_data_xfer = vlb32_data_xfer,
+};
+
+static struct ata_port_operations qdi6580_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = qdi6580_set_piomode,
+ .sff_data_xfer = vlb32_data_xfer,
+};
+
+static struct ata_port_operations qdi6580dp_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = qdi6580dp_set_piomode,
+ .sff_data_xfer = vlb32_data_xfer,
+};
+
+static DEFINE_SPINLOCK(winbond_lock);
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ outb(val, port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+ u8 val;
+
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ val = inb(port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+
+ return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *ld_winbond = ap->host->private_data;
+ int active, recovery;
+ u8 reg;
+ int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+ reg = winbond_readcfg(ld_winbond->timing, 0x81);
+
+ /* Get the timing data in cycles */
+ if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+ else
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
+ timing = (active << 4) | recovery;
+ winbond_writecfg(ld_winbond->timing, timing, reg);
+
+ /* Load the setup timing */
+
+ reg = 0x35;
+ if (adev->class != ATA_DEV_ATA)
+ reg |= 0x08; /* FIFO off */
+ if (!ata_pio_need_iordy(adev))
+ reg |= 0x02; /* IORDY off */
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
+ winbond_writecfg(ld_winbond->timing, timing + 1, reg);
+}
+
+static int winbond_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations winbond_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .set_piomode = winbond_set_piomode,
+ .sff_data_xfer = vlb32_data_xfer,
+};
+
+static struct legacy_controller controllers[] = {
+ {"BIOS", &legacy_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"Snooping", &simple_port_ops, 0x1F,
+ 0 , NULL },
+ {"PDC20230", &pdc20230_port_ops, 0x7,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560A", &ht6560a_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560B", &ht6560b_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
+ 0 , NULL },
+ {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
+ 0 , NULL },
+ {"QDI6500", &qdi6500_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, qdi_port },
+ {"QDI6580", &qdi6580_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"W83759A", &winbond_port_ops, 0x1F,
+ 0 , winbond_port }
+};
+
+/**
+ * probe_chip_type - Discover controller
+ * @probe: Probe entry to check
+ *
+ * Probe an ATA port and identify the type of controller. We don't
+ * check if the controller appears to be driveless at this point.
+ */
+
+static __init int probe_chip_type(struct legacy_probe *probe)
+{
+ int mask = 1 << probe->slot;
+
+ if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) {
+ u8 reg = winbond_readcfg(winbond, 0x81);
+ reg |= 0x80; /* jumpered mode off */
+ winbond_writecfg(winbond, 0x81, reg);
+ reg = winbond_readcfg(winbond, 0x83);
+ reg |= 0xF0; /* local control */
+ winbond_writecfg(winbond, 0x83, reg);
+ reg = winbond_readcfg(winbond, 0x85);
+ reg |= 0xF0; /* programmable timing */
+ winbond_writecfg(winbond, 0x85, reg);
+
+ reg = winbond_readcfg(winbond, 0x81);
+
+ if (reg & mask)
+ return W83759A;
+ }
+ if (probe->port == 0x1F0) {
+ unsigned long flags;
+ local_irq_save(flags);
+ /* Probes */
+ outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F5);
+ inb(0x1F2);
+ inb(0x3F6);
+ inb(0x3F6);
+ inb(0x1F2);
+ inb(0x1F2);
+
+ if ((inb(0x1F2) & 0x80) == 0) {
+ /* PDC20230c or 20630 ? */
+ printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller"
+ " detected.\n");
+ udelay(100);
+ inb(0x1F5);
+ local_irq_restore(flags);
+ return PDC20230;
+ } else {
+ outb(0x55, 0x1F2);
+ inb(0x1F2);
+ inb(0x1F2);
+ if (inb(0x1F2) == 0x00)
+ printk(KERN_INFO "PDC20230-B VLB ATA "
+ "controller detected.\n");
+ local_irq_restore(flags);
+ return BIOS;
+ }
+ local_irq_restore(flags);
+ }
+
+ if (ht6560a & mask)
+ return HT6560A;
+ if (ht6560b & mask)
+ return HT6560B;
+ if (opti82c611a & mask)
+ return OPTI611A;
+ if (opti82c46x & mask)
+ return OPTI46X;
+ if (autospeed & mask)
+ return SNOOP;
+ return BIOS;
+}
+
+
+/**
+ * legacy_init_one - attach a legacy interface
+ * @pl: probe record
+ *
+ * Register an ISA bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int legacy_init_one(struct legacy_probe *probe)
+{
+ struct legacy_controller *controller = &controllers[probe->type];
+ int pio_modes = controller->pio_mask;
+ unsigned long io = probe->port;
+ u32 mask = (1 << probe->slot);
+ struct ata_port_operations *ops = controller->ops;
+ struct legacy_data *ld = &legacy_data[probe->slot];
+ struct ata_host *host = NULL;
+ struct ata_port *ap;
+ struct platform_device *pdev;
+ struct ata_device *dev;
+ void __iomem *io_addr, *ctrl_addr;
+ u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
+ int ret;
+
+ iordy |= controller->flags;
+
+ pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ ret = -EBUSY;
+ if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
+ devm_request_region(&pdev->dev, io + 0x0206, 1,
+ "pata_legacy") == NULL)
+ goto fail;
+
+ ret = -ENOMEM;
+ io_addr = devm_ioport_map(&pdev->dev, io, 8);
+ ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
+ if (!io_addr || !ctrl_addr)
+ goto fail;
+ if (controller->setup)
+ if (controller->setup(pdev, probe, ld) < 0)
+ goto fail;
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ goto fail;
+ ap = host->ports[0];
+
+ ap->ops = ops;
+ ap->pio_mask = pio_modes;
+ ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->ioaddr.cmd_addr = io_addr;
+ ap->ioaddr.altstatus_addr = ctrl_addr;
+ ap->ioaddr.ctl_addr = ctrl_addr;
+ ata_sff_std_ports(&ap->ioaddr);
+ ap->host->private_data = ld;
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
+
+ ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
+ &legacy_sht);
+ if (ret)
+ goto fail;
+ ld->platform_dev = pdev;
+
+ /* Nothing found means we drop the port as its probably not there */
+
+ ret = -ENODEV;
+ ata_link_for_each_dev(dev, &ap->link) {
+ if (!ata_dev_absent(dev)) {
+ legacy_host[probe->slot] = host;
+ ld->platform_dev = pdev;
+ return 0;
+ }
+ }
+fail:
+ platform_device_unregister(pdev);
+ return ret;
+}
+
+/**
+ * legacy_check_special_cases - ATA special cases
+ * @p: PCI device to check
+ * @master: set this if we find an ATA master
+ * @master: set this if we find an ATA secondary
+ *
+ * A small number of vendors implemented early PCI ATA interfaces
+ * on bridge logic without the ATA interface being PCI visible.
+ * Where we have a matching PCI driver we must skip the relevant
+ * device here. If we don't know about it then the legacy driver
+ * is the right driver anyway.
+ */
+
+static void __init legacy_check_special_cases(struct pci_dev *p, int *primary,
+ int *secondary)
+{
+ /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == 0x1078 && p->device == 0x0000) {
+ *primary = *secondary = 1;
+ return;
+ }
+ /* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */
+ if (p->vendor == 0x1078 && p->device == 0x0002) {
+ *primary = *secondary = 1;
+ return;
+ }
+ /* Intel MPIIX - PIO ATA on non PCI side of bridge */
+ if (p->vendor == 0x8086 && p->device == 0x1234) {
+ u16 r;
+ pci_read_config_word(p, 0x6C, &r);
+ if (r & 0x8000) {
+ /* ATA port enabled */
+ if (r & 0x4000)
+ *secondary = 1;
+ else
+ *primary = 1;
+ }
+ return;
+ }
+}
+
+static __init void probe_opti_vlb(void)
+{
+ /* If an OPTI 82C46X is present find out where the channels are */
+ static const char *optis[4] = {
+ "3/463MV", "5MV",
+ "5MVA", "5MVB"
+ };
+ u8 chans = 1;
+ u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
+
+ opti82c46x = 3; /* Assume master and slave first */
+ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n",
+ optis[ctrl]);
+ if (ctrl == 3)
+ chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
+ ctrl = opti_syscfg(0xAC);
+ /* Check enabled and this port is the 465MV port. On the
+ MVB we may have two channels */
+ if (ctrl & 8) {
+ if (chans == 2) {
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ }
+ if (ctrl & 4)
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ } else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+}
+
+static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
+{
+ static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
+ /* Check card type */
+ if ((r & 0xF0) == 0xC0) {
+ /* QD6500: single channel */
+ if (r & 8)
+ /* Disabled ? */
+ return;
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6500, port);
+ }
+ if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
+ /* QD6580: dual channel */
+ if (!request_region(port + 2 , 2, "pata_qdi")) {
+ release_region(port, 2);
+ return;
+ }
+ res = inb(port + 3);
+ /* Single channel mode ? */
+ if (res & 1)
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6580, port);
+ else { /* Dual channel mode */
+ legacy_probe_add(0x1F0, 14, QDI6580DP, port);
+ /* port + 0x02, r & 0x04 */
+ legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
+ }
+ release_region(port + 2, 2);
+ }
+}
+
+static __init void probe_qdi_vlb(void)
+{
+ unsigned long flags;
+ static const unsigned long qd_port[2] = { 0x30, 0xB0 };
+ int i;
+
+ /*
+ * Check each possible QD65xx base address
+ */
+
+ for (i = 0; i < 2; i++) {
+ unsigned long port = qd_port[i];
+ u8 r, res;
+
+
+ if (request_region(port, 2, "pata_qdi")) {
+ /* Check for a card */
+ local_irq_save(flags);
+ /* I have no h/w that needs this delay but it
+ is present in the historic code */
+ r = inb(port);
+ udelay(1);
+ outb(0x19, port);
+ udelay(1);
+ res = inb(port);
+ udelay(1);
+ outb(r, port);
+ udelay(1);
+ local_irq_restore(flags);
+
+ /* Fail */
+ if (res == 0x19) {
+ release_region(port, 2);
+ continue;
+ }
+ /* Passes the presence test */
+ r = inb(port + 1);
+ udelay(1);
+ /* Check port agrees with port set */
+ if ((r & 2) >> 1 == i)
+ qdi65_identify_port(r, res, port);
+ release_region(port, 2);
+ }
+ }
+}
+
+/**
+ * legacy_init - attach legacy interfaces
+ *
+ * Attach legacy IDE interfaces by scanning the usual IRQ/port suspects.
+ * Right now we do not scan the ide0 and ide1 address but should do so
+ * for non PCI systems or systems with no PCI IDE legacy mode devices.
+ * If you fix that note there are special cases to consider like VLB
+ * drivers and CS5510/20.
+ */
+
+static __init int legacy_init(void)
+{
+ int i;
+ int ct = 0;
+ int primary = 0;
+ int secondary = 0;
+ int pci_present = 0;
+ struct legacy_probe *pl = &probe_list[0];
+ int slot = 0;
+
+ struct pci_dev *p = NULL;
+
+ for_each_pci_dev(p) {
+ int r;
+ /* Check for any overlap of the system ATA mappings. Native
+ mode controllers stuck on these addresses or some devices
+ in 'raid' mode won't be found by the storage class test */
+ for (r = 0; r < 6; r++) {
+ if (pci_resource_start(p, r) == 0x1f0)
+ primary = 1;
+ if (pci_resource_start(p, r) == 0x170)
+ secondary = 1;
+ }
+ /* Check for special cases */
+ legacy_check_special_cases(p, &primary, &secondary);
+
+ /* If PCI bus is present then don't probe for tertiary
+ legacy ports */
+ pci_present = 1;
+ }
+
+ if (winbond == 1)
+ winbond = 0x130; /* Default port, alt is 1B0 */
+
+ if (primary == 0 || all)
+ legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
+ if (secondary == 0 || all)
+ legacy_probe_add(0x170, 15, UNKNOWN, 0);
+
+ if (probe_all || !pci_present) {
+ /* ISA/VLB extra ports */
+ legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
+ legacy_probe_add(0x168, 10, UNKNOWN, 0);
+ legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
+ legacy_probe_add(0x160, 12, UNKNOWN, 0);
+ }
+
+ if (opti82c46x)
+ probe_opti_vlb();
+ if (qdi)
+ probe_qdi_vlb();
+
+ for (i = 0; i < NR_HOST; i++, pl++) {
+ if (pl->port == 0)
+ continue;
+ if (pl->type == UNKNOWN)
+ pl->type = probe_chip_type(pl);
+ pl->slot = slot++;
+ if (legacy_init_one(pl) == 0)
+ ct++;
+ }
+ if (ct != 0)
+ return 0;
+ return -ENODEV;
+}
+
+static __exit void legacy_exit(void)
+{
+ int i;
+
+ for (i = 0; i < nr_legacy_host; i++) {
+ struct legacy_data *ld = &legacy_data[i];
+ ata_host_detach(legacy_host[i]);
+ platform_device_unregister(ld->platform_dev);
+ }
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for legacy ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(probe_all, int, 0);
+module_param(autospeed, int, 0);
+module_param(ht6560a, int, 0);
+module_param(ht6560b, int, 0);
+module_param(opti82c611a, int, 0);
+module_param(opti82c46x, int, 0);
+module_param(qdi, int, 0);
+module_param(pio_mask, int, 0);
+module_param(iordy_mask, int, 0);
+
+module_init(legacy_init);
+module_exit(legacy_exit);
OpenPOWER on IntegriCloud