diff options
Diffstat (limited to 'drivers/ata/ata_generic.c')
-rw-r--r-- | drivers/ata/ata_generic.c | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c new file mode 100644 index 0000000..5c33767 --- /dev/null +++ b/drivers/ata/ata_generic.c @@ -0,0 +1,214 @@ +/* + * ata_generic.c - Generic PATA/SATA controller driver. + * Copyright 2005 Red Hat Inc, all rights reserved. + * + * Elements from ide/pci/generic.c + * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> + * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com> + * + * May be copied or modified under the terms of the GNU General Public License + * + * Driver for PCI IDE interfaces implementing the standard bus mastering + * interface functionality. This assumes the BIOS did the drive set up and + * tuning for us. By default we do not grab all IDE class devices as they + * may have other drivers or need fixups to avoid problems. Instead we keep + * a default list of stuff without documentation/driver that appears to + * work. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "ata_generic" +#define DRV_VERSION "0.2.15" + +/* + * A generic parallel ATA driver using libata + */ + +/** + * generic_set_mode - mode setting + * @link: link to set up + * @unused: returned device on error + * + * Use a non standard set_mode function. We don't want to be tuned. + * The BIOS configured everything. Our job is not to fiddle. We + * read the dma enabled bits from the PCI configuration of the device + * and respect them. + */ + +static int generic_set_mode(struct ata_link *link, struct ata_device **unused) +{ + struct ata_port *ap = link->ap; + int dma_enabled = 0; + struct ata_device *dev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + /* Bits 5 and 6 indicate if DMA is active on master/slave */ + if (ap->ioaddr.bmdma_addr) + dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + + if (pdev->vendor == PCI_VENDOR_ID_CENATEK) + dma_enabled = 0xFF; + + ata_link_for_each_dev(dev, link) { + if (!ata_dev_enabled(dev)) + continue; + + /* We don't really care */ + dev->pio_mode = XFER_PIO_0; + dev->dma_mode = XFER_MW_DMA_0; + /* We do need the right mode information for DMA or PIO + and this comes from the current configuration flags */ + if (dma_enabled & (1 << (5 + dev->devno))) { + unsigned int xfer_mask = ata_id_xfermask(dev->id); + const char *name; + + if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA)) + name = ata_mode_string(xfer_mask); + else { + /* SWDMA perhaps? */ + name = "DMA"; + xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0); + } + + ata_dev_printk(dev, KERN_INFO, "configured for %s\n", + name); + + dev->xfer_mode = ata_xfer_mask2mode(xfer_mask); + dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode); + dev->flags &= ~ATA_DFLAG_PIO; + } else { + ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + } + } + return 0; +} + +static struct scsi_host_template generic_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations generic_port_ops = { + .inherits = &ata_bmdma_port_ops, + .cable_detect = ata_cable_unknown, + .set_mode = generic_set_mode, +}; + +static int all_generic_ide; /* Set to claim all devices */ + +/** + * ata_generic_init - attach generic IDE + * @dev: PCI device found + * @id: match entry + * + * Called each time a matching IDE interface is found. We check if the + * interface is one we wish to claim and if so we perform any chip + * specific hacks then let the ATA layer do the heavy lifting. + */ + +static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + u16 command; + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA5, + .port_ops = &generic_port_ops + }; + const struct ata_port_info *ppi[] = { &info, NULL }; + + /* Don't use the generic entry unless instructed to do so */ + if (id->driver_data == 1 && all_generic_ide == 0) + return -ENODEV; + + /* Devices that need care */ + if (dev->vendor == PCI_VENDOR_ID_UMC && + dev->device == PCI_DEVICE_ID_UMC_UM8886A && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_OPTI && + dev->device == PCI_DEVICE_ID_OPTI_82C558 && + (!(PCI_FUNC(dev->devfn) & 1))) + return -ENODEV; + + /* Don't re-enable devices in generic mode or we will break some + motherboards with disabled and unused IDE controllers */ + pci_read_config_word(dev, PCI_COMMAND, &command); + if (!(command & PCI_COMMAND_IO)) + return -ENODEV; + + if (dev->vendor == PCI_VENDOR_ID_AL) + ata_pci_bmdma_clear_simplex(dev); + + if (dev->vendor == PCI_VENDOR_ID_ATI) { + int rc = pcim_enable_device(dev); + if (rc < 0) + return rc; + pcim_pin_device(dev); + } + return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL); +} + +static struct pci_device_id ata_generic[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8673F), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886A), }, + { PCI_DEVICE(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF), }, + { PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), }, + { PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), }, + { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), }, + { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, + /* Must come last. If you add entries adjust this table appropriately */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, + { 0, }, +}; + +static struct pci_driver ata_generic_pci_driver = { + .name = DRV_NAME, + .id_table = ata_generic, + .probe = ata_generic_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +static int __init ata_generic_init(void) +{ + return pci_register_driver(&ata_generic_pci_driver); +} + + +static void __exit ata_generic_exit(void) +{ + pci_unregister_driver(&ata_generic_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for generic ATA"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ata_generic); +MODULE_VERSION(DRV_VERSION); + +module_init(ata_generic_init); +module_exit(ata_generic_exit); + +module_param(all_generic_ide, int, 0); |