diff options
Diffstat (limited to 'drivers/ata/ahci.c')
| -rw-r--r-- | drivers/ata/ahci.c | 2718 |
1 files changed, 2718 insertions, 0 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c new file mode 100644 index 0000000..a67b8e7 --- /dev/null +++ b/drivers/ata/ahci.c @@ -0,0 +1,2718 @@ +/* + * ahci.c - AHCI SATA support + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2004-2005 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/device.h> +#include <linux/dmi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <linux/libata.h> + +#define DRV_NAME "ahci" +#define DRV_VERSION "3.0" + +/* Enclosure Management Control */ +#define EM_CTRL_MSG_TYPE 0x000f0000 + +/* Enclosure Management LED Message Type */ +#define EM_MSG_LED_HBA_PORT 0x0000000f +#define EM_MSG_LED_PMP_SLOT 0x0000ff00 +#define EM_MSG_LED_VALUE 0xffff0000 +#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000 +#define EM_MSG_LED_VALUE_OFF 0xfff80000 +#define EM_MSG_LED_VALUE_ON 0x00010000 + +static int ahci_skip_host_reset; +module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); +MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); + +static int ahci_enable_alpm(struct ata_port *ap, + enum link_pm policy); +static void ahci_disable_alpm(struct ata_port *ap); +static ssize_t ahci_led_show(struct ata_port *ap, char *buf); +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size); +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size); +#define MAX_SLOTS 8 + +enum { + AHCI_PCI_BAR = 5, + AHCI_MAX_PORTS = 32, + AHCI_MAX_SG = 168, /* hardware max is 64K */ + AHCI_DMA_BOUNDARY = 0xffffffff, + AHCI_MAX_CMDS = 32, + AHCI_CMD_SZ = 32, + AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ, + AHCI_RX_FIS_SZ = 256, + AHCI_CMD_TBL_CDB = 0x40, + AHCI_CMD_TBL_HDR_SZ = 0x80, + AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16), + AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, + AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + + AHCI_RX_FIS_SZ, + AHCI_IRQ_ON_SG = (1 << 31), + AHCI_CMD_ATAPI = (1 << 5), + AHCI_CMD_WRITE = (1 << 6), + AHCI_CMD_PREFETCH = (1 << 7), + AHCI_CMD_RESET = (1 << 8), + AHCI_CMD_CLR_BUSY = (1 << 10), + + RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ + RX_FIS_SDB = 0x58, /* offset of SDB FIS data */ + RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */ + + board_ahci = 0, + board_ahci_vt8251 = 1, + board_ahci_ign_iferr = 2, + board_ahci_sb600 = 3, + board_ahci_mv = 4, + board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, + + /* global controller registers */ + HOST_CAP = 0x00, /* host capabilities */ + HOST_CTL = 0x04, /* global host control */ + HOST_IRQ_STAT = 0x08, /* interrupt status */ + HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ + HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + HOST_EM_LOC = 0x1c, /* Enclosure Management location */ + HOST_EM_CTL = 0x20, /* Enclosure Management Control */ + + /* HOST_CTL bits */ + HOST_RESET = (1 << 0), /* reset controller; self-clear */ + HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ + HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + + /* HOST_CAP bits */ + HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ + HOST_CAP_SSC = (1 << 14), /* Slumber capable */ + HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ + HOST_CAP_CLO = (1 << 24), /* Command List Override support */ + HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ + HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ + HOST_CAP_SNTF = (1 << 29), /* SNotification register */ + HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ + HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + + /* registers for each SATA port */ + PORT_LST_ADDR = 0x00, /* command list DMA addr */ + PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */ + PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */ + PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */ + PORT_IRQ_STAT = 0x10, /* interrupt status */ + PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */ + PORT_CMD = 0x18, /* port command */ + PORT_TFDATA = 0x20, /* taskfile data */ + PORT_SIG = 0x24, /* device TF signature */ + PORT_CMD_ISSUE = 0x38, /* command issue */ + PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */ + PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */ + PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ + PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ + PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ + + /* PORT_IRQ_{STAT,MASK} bits */ + PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ + PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ + PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ + PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ + PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ + PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + + PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | + PORT_IRQ_IF_ERR | + PORT_IRQ_CONNECT | + PORT_IRQ_PHYRDY | + PORT_IRQ_UNK_FIS | + PORT_IRQ_BAD_PMP, + PORT_IRQ_ERROR = PORT_IRQ_FREEZE | + PORT_IRQ_TF_ERR | + PORT_IRQ_HBUS_DATA_ERR, + DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | + PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | + PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS, + + /* PORT_CMD bits */ + PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ + PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ + PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ + PORT_CMD_PMP = (1 << 17), /* PMP attached */ + PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = (1 << 3), /* Command list override */ + PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ + PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ + PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ + + PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ + PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + + /* hpriv->flags bits */ + AHCI_HFLAG_NO_NCQ = (1 << 0), + AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ + AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ + AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ + AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ + AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ + AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ + AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ + AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + + /* ap->flags bits */ + + AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | + ATA_FLAG_ACPI_SATA | ATA_FLAG_AN | + ATA_FLAG_IPM, + + ICH_MAP = 0x90, /* ICH MAP register */ + + /* em_ctl bits */ + EM_CTL_RST = (1 << 9), /* Reset */ + EM_CTL_TM = (1 << 8), /* Transmit Message */ + EM_CTL_ALHD = (1 << 26), /* Activity LED */ +}; + +struct ahci_cmd_hdr { + __le32 opts; + __le32 status; + __le32 tbl_addr; + __le32 tbl_addr_hi; + __le32 reserved[4]; +}; + +struct ahci_sg { + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 flags_size; +}; + +struct ahci_em_priv { + enum sw_activity blink_policy; + struct timer_list timer; + unsigned long saved_activity; + unsigned long activity; + unsigned long led_state; +}; + +struct ahci_host_priv { + unsigned int flags; /* AHCI_HFLAG_* */ + u32 cap; /* cap to use */ + u32 port_map; /* port map to use */ + u32 saved_cap; /* saved initial cap */ + u32 saved_port_map; /* saved initial port_map */ + u32 em_loc; /* enclosure management location */ +}; + +struct ahci_port_priv { + struct ata_link *active_link; + struct ahci_cmd_hdr *cmd_slot; + dma_addr_t cmd_slot_dma; + void *cmd_tbl; + dma_addr_t cmd_tbl_dma; + void *rx_fis; + dma_addr_t rx_fis_dma; + /* for NCQ spurious interrupt analysis */ + unsigned int ncq_saw_d2h:1; + unsigned int ncq_saw_dmas:1; + unsigned int ncq_saw_sdb:1; + u32 intr_mask; /* interrupts to enable */ + struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info + * per PM slot */ +}; + +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); +static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); +static int ahci_port_start(struct ata_port *ap); +static void ahci_port_stop(struct ata_port *ap); +static void ahci_qc_prep(struct ata_queued_cmd *qc); +static void ahci_freeze(struct ata_port *ap); +static void ahci_thaw(struct ata_port *ap); +static void ahci_pmp_attach(struct ata_port *ap); +static void ahci_pmp_detach(struct ata_port *ap); +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void ahci_postreset(struct ata_link *link, unsigned int *class); +static void ahci_error_handler(struct ata_port *ap); +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); +static int ahci_port_resume(struct ata_port *ap); +static void ahci_dev_config(struct ata_device *dev); +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts); +#ifdef CONFIG_PM +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int ahci_pci_device_resume(struct pci_dev *pdev); +#endif +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); +static ssize_t ahci_activity_store(struct ata_device *dev, + enum sw_activity val); +static void ahci_init_sw_activity(struct ata_link *link); + +static struct device_attribute *ahci_shost_attrs[] = { + &dev_attr_link_power_management_policy, + &dev_attr_em_message_type, + &dev_attr_em_message, + NULL +}; + +static struct device_attribute *ahci_sdev_attrs[] = { + &dev_attr_sw_activity, + &dev_attr_unload_heads, + NULL +}; + +static struct scsi_host_template ahci_sht = { + ATA_NCQ_SHT(DRV_NAME), + .can_queue = AHCI_MAX_CMDS - 1, + .sg_tablesize = AHCI_MAX_SG, + .dma_boundary = AHCI_DMA_BOUNDARY, + .shost_attrs = ahci_shost_attrs, + .sdev_attrs = ahci_sdev_attrs, +}; + +static struct ata_port_operations ahci_ops = { + .inherits = &sata_pmp_port_ops, + + .qc_defer = sata_pmp_qc_defer_cmd_switch, + .qc_prep = ahci_qc_prep, + .qc_issue = ahci_qc_issue, + .qc_fill_rtf = ahci_qc_fill_rtf, + + .freeze = ahci_freeze, + .thaw = ahci_thaw, + .softreset = ahci_softreset, + .hardreset = ahci_hardreset, + .postreset = ahci_postreset, + .pmp_softreset = ahci_softreset, + .error_handler = ahci_error_handler, + .post_internal_cmd = ahci_post_internal_cmd, + .dev_config = ahci_dev_config, + + .scr_read = ahci_scr_read, + .scr_write = ahci_scr_write, + .pmp_attach = ahci_pmp_attach, + .pmp_detach = ahci_pmp_detach, + + .enable_pm = ahci_enable_alpm, + .disable_pm = ahci_disable_alpm, + .em_show = ahci_led_show, + .em_store = ahci_led_store, + .sw_activity_show = ahci_activity_show, + .sw_activity_store = ahci_activity_store, +#ifdef CONFIG_PM + .port_suspend = ahci_port_suspend, + .port_resume = ahci_port_resume, +#endif + .port_start = ahci_port_start, + .port_stop = ahci_port_stop, +}; + +static struct ata_port_operations ahci_vt8251_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_vt8251_hardreset, +}; + +static struct ata_port_operations ahci_p5wdh_ops = { + .inherits = &ahci_ops, + .hardreset = ahci_p5wdh_hardreset, +}; + +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + +static const struct ata_port_info ahci_port_info[] = { + /* board_ahci */ + { + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* board_ahci_vt8251 */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_vt8251_ops, + }, + /* board_ahci_ign_iferr */ + { + AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* board_ahci_sb600 */ + { + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | + AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_SECT255), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_sb600_ops, + }, + /* board_ahci_mv */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | + AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* board_ahci_sb700 */ + { + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_sb600_ops, + }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, +}; + +static const struct pci_device_id ahci_pci_tbl[] = { + /* Intel */ + { PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */ + { PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */ + { PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */ + { PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */ + { PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */ + { PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */ + { PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */ + { PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */ + { PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */ + { PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */ + { PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */ + { PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */ + { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ + { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ + { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ + { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ + + /* JMicron 360/1/3/5/6, match class to avoid IDE function */ + { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr }, + + /* ATI */ + { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */ + + /* VIA */ + { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ + { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ + + /* NVIDIA */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */ + { PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ + { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ + + /* SiS */ + { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + + /* Marvell */ + { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ + { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ + + /* Promise */ + { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ + + /* Generic, PCI class code for AHCI */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, + + { } /* terminate list */ +}; + + +static struct pci_driver ahci_pci_driver = { + .name = DRV_NAME, + .id_table = ahci_pci_tbl, + .probe = ahci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = ahci_pci_device_suspend, + .resume = ahci_pci_device_resume, +#endif +}; + +static int ahci_em_messages = 1; +module_param(ahci_em_messages, int, 0444); +/* add other LED protocol types when they become supported */ +MODULE_PARM_DESC(ahci_em_messages, + "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); + +#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) +static int marvell_enable; +#else +static int marvell_enable = 1; +#endif +module_param(marvell_enable, int, 0644); +MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); + + +static inline int ahci_nr_ports(u32 cap) +{ + return (cap & 0x1f) + 1; +} + +static inline void __iomem *__ahci_port_base(struct ata_host *host, + unsigned int port_no) +{ + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + + return mmio + 0x100 + (port_no * 0x80); +} + +static inline void __iomem *ahci_port_base(struct ata_port *ap) +{ + return __ahci_port_base(ap->host, ap->port_no); +} + +static void ahci_enable_ahci(void __iomem *mmio) +{ + int i; + u32 tmp; + + /* turn on AHCI_EN */ + tmp = readl(mmio + HOST_CTL); + if (tmp & HOST_AHCI_EN) + return; + + /* Some controllers need AHCI_EN to be written multiple times. + * Try a few times before giving up. + */ + for (i = 0; i < 5; i++) { + tmp |= HOST_AHCI_EN; + writel(tmp, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ + if (tmp & HOST_AHCI_EN) + return; + msleep(10); + } + + WARN_ON(1); +} + +/** + * ahci_save_initial_config - Save and fixup initial config values + * @pdev: target PCI device + * @hpriv: host private area to store config values + * + * Some registers containing configuration info might be setup by + * BIOS and might be cleared on reset. This function saves the + * initial values of those registers into @hpriv such that they + * can be restored after controller reset. + * + * If inconsistent, config values are fixed up by this function. + * + * LOCKING: + * None. + */ +static void ahci_save_initial_config(struct pci_dev *pdev, + struct ahci_host_priv *hpriv) +{ + void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + u32 cap, port_map; + int i; + int mv; + + /* make sure AHCI mode is enabled before accessing CAP */ + ahci_enable_ahci(mmio); + + /* Values prefixed with saved_ are written back to host after + * reset. Values without are used for driver operation. + */ + hpriv->saved_cap = cap = readl(mmio + HOST_CAP); + hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); + + /* some chips have errata preventing 64bit use */ + if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do 64bit DMA, forcing 32bit\n"); + cap &= ~HOST_CAP_64; + } + + if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do NCQ, turning off CAP_NCQ\n"); + cap &= ~HOST_CAP_NCQ; + } + + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do PMP, turning off CAP_PMP\n"); + cap &= ~HOST_CAP_PMP; + } + + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + + /* + * Temporary Marvell 6145 hack: PATA port presence + * is asserted through the standard AHCI port + * presence register, as bit 4 (counting from 0) + */ + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mv = 0x3; + else + mv = 0xf; + dev_printk(KERN_ERR, &pdev->dev, + "MV_AHCI HACK: port_map %x -> %x\n", + port_map, + port_map & mv); + dev_printk(KERN_ERR, &pdev->dev, + "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); + + port_map &= mv; + } + + /* cross check port_map and cap.n_ports */ + if (port_map) { + int map_ports = 0; + + for (i = 0; i < AHCI_MAX_PORTS; i++) + if (port_map & (1 << i)) + map_ports++; + + /* If PI has more ports than n_ports, whine, clear + * port_map and let it be generated from n_ports. + */ + if (map_ports > ahci_nr_ports(cap)) { + dev_printk(KERN_WARNING, &pdev->dev, + "implemented port map (0x%x) contains more " + "ports than nr_ports (%u), using nr_ports\n", + port_map, ahci_nr_ports(cap)); + port_map = 0; + } + } + + /* fabricate port_map from cap.nr_ports */ + if (!port_map) { + port_map = (1 << ahci_nr_ports(cap)) - 1; + dev_printk(KERN_WARNING, &pdev->dev, + "forcing PORTS_IMPL to 0x%x\n", port_map); + + /* write the fixed up value to the PI register */ + hpriv->saved_port_map = port_map; + } + + /* record values to use during operation */ + hpriv->cap = cap; + hpriv->port_map = port_map; +} + +/** + * ahci_restore_initial_config - Restore initial config + * @host: target ATA host + * + * Restore initial config stored by ahci_save_initial_config(). + * + * LOCKING: + * None. + */ +static void ahci_restore_initial_config(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + + writel(hpriv->saved_cap, mmio + HOST_CAP); + writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); + (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ +} + +static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) +{ + static const int offset[] = { + [SCR_STATUS] = PORT_SCR_STAT, + [SCR_CONTROL] = PORT_SCR_CTL, + [SCR_ERROR] = PORT_SCR_ERR, + [SCR_ACTIVE] = PORT_SCR_ACT, + [SCR_NOTIFICATION] = PORT_SCR_NTF, + }; + struct ahci_host_priv *hpriv = ap->host->private_data; + + if (sc_reg < ARRAY_SIZE(offset) && + (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) + return offset[sc_reg]; + return 0; +} + +static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); + + if (offset) { + *val = readl(port_mmio + offset); + return 0; + } + return -EINVAL; +} + +static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + int offset = ahci_scr_offset(link->ap, sc_reg); + + if (offset) { + writel(val, port_mmio + offset); + return 0; + } + return -EINVAL; +} + +static void ahci_start_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* start DMA */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ +} + +static int ahci_stop_engine(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + tmp = readl(port_mmio + PORT_CMD); + + /* check if the HBA is idle */ + if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) + return 0; + + /* setting HBA to idle */ + tmp &= ~PORT_CMD_START; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for engine to stop. This could be as long as 500 msec */ + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); + if (tmp & PORT_CMD_LIST_ON) + return -EIO; + + return 0; +} + +static void ahci_start_fis_rx(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + u32 tmp; + + /* set FIS registers */ + if (hpriv->cap & HOST_CAP_64) + writel((pp->cmd_slot_dma >> 16) >> 16, + port_mmio + PORT_LST_ADDR_HI); + writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); + + if (hpriv->cap & HOST_CAP_64) + writel((pp->rx_fis_dma >> 16) >> 16, + port_mmio + PORT_FIS_ADDR_HI); + writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); + + /* enable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* flush */ + readl(port_mmio + PORT_CMD); +} + +static int ahci_stop_fis_rx(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* disable FIS reception */ + tmp = readl(port_mmio + PORT_CMD); + tmp &= ~PORT_CMD_FIS_RX; + writel(tmp, port_mmio + PORT_CMD); + + /* wait for completion, spec says 500ms, give it 1000 */ + tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, + PORT_CMD_FIS_ON, 10, 1000); + if (tmp & PORT_CMD_FIS_ON) + return -EBUSY; + + return 0; +} + +static void ahci_power_up(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + + /* spin up device */ + if (hpriv->cap & HOST_CAP_SSS) { + cmd |= PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); + } + + /* wake up link */ + writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); +} + +static void ahci_disable_alpm(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd; + struct ahci_port_priv *pp = ap->private_data; + + /* IPM bits should be disabled by libata-core */ + /* get the existing command bits */ + cmd = readl(port_mmio + PORT_CMD); + + /* disable ALPM and ASP */ + cmd &= ~PORT_CMD_ASP; + cmd &= ~PORT_CMD_ALPE; + + /* force the interface back to active */ + cmd |= PORT_CMD_ICC_ACTIVE; + + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + cmd = readl(port_mmio + PORT_CMD); + + /* wait 10ms to be sure we've come out of any low power state */ + msleep(10); + + /* clear out any PhyRdy stuff from interrupt status */ + writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); + + /* go ahead and clean out PhyRdy Change from Serror too */ + ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); + + /* + * Clear flag to indicate that we should ignore all PhyRdy + * state changes + */ + hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; + + /* + * Enable interrupts on Phy Ready. + */ + pp->intr_mask |= PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + /* + * don't change the link pm policy - we can be called + * just to turn of link pm temporarily + */ +} + +static int ahci_enable_alpm(struct ata_port *ap, + enum link_pm policy) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd; + struct ahci_port_priv *pp = ap->private_data; + u32 asp; + + /* Make sure the host is capable of link power management */ + if (!(hpriv->cap & HOST_CAP_ALPM)) + return -EINVAL; + + switch (policy) { + case MAX_PERFORMANCE: + case NOT_AVAILABLE: + /* + * if we came here with NOT_AVAILABLE, + * it just means this is the first time we + * have tried to enable - default to max performance, + * and let the user go to lower power modes on request. + */ + ahci_disable_alpm(ap); + return 0; + case MIN_POWER: + /* configure HBA to enter SLUMBER */ + asp = PORT_CMD_ASP; + break; + case MEDIUM_POWER: + /* configure HBA to enter PARTIAL */ + asp = 0; + break; + default: + return -EINVAL; + } + + /* + * Disable interrupts on Phy Ready. This keeps us from + * getting woken up due to spurious phy ready interrupts + * TBD - Hot plug should be done via polling now, is + * that even supported? + */ + pp->intr_mask &= ~PORT_IRQ_PHYRDY; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); + + /* + * Set a flag to indicate that we should ignore all PhyRdy + * state changes since these can happen now whenever we + * change link state + */ + hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; + + /* get the existing command bits */ + cmd = readl(port_mmio + PORT_CMD); + + /* + * Set ASP based on Policy + */ + cmd |= asp; + + /* + * Setting this bit will instruct the HBA to aggressively + * enter a lower power link state when it's appropriate and + * based on the value set above for ASP + */ + cmd |= PORT_CMD_ALPE; + + /* write out new cmd value */ + writel(cmd, port_mmio + PORT_CMD); + cmd = readl(port_mmio + PORT_CMD); + + /* IPM bits should be set by libata-core */ + return 0; +} + +#ifdef CONFIG_PM +static void ahci_power_down(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd, scontrol; + + if (!(hpriv->cap & HOST_CAP_SSS)) + return; + + /* put device into listen mode, first set PxSCTL.DET to 0 */ + scontrol = readl(port_mmio + PORT_SCR_CTL); + scontrol &= ~0xf; + writel(scontrol, port_mmio + PORT_SCR_CTL); + + /* then set PxCMD.SUD to 0 */ + cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; + cmd &= ~PORT_CMD_SPIN_UP; + writel(cmd, port_mmio + PORT_CMD); +} +#endif + +static void ahci_start_port(struct ata_port *ap) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + + /* enable FIS reception */ + ahci_start_fis_rx(ap); + + /* enable DMA */ + ahci_start_engine(ap); + + /* turn on LEDs */ + if (ap->flags & ATA_FLAG_EM) { + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + ahci_transmit_led_message(ap, emp->led_state, 4); + } + } + + if (ap->flags & ATA_FLAG_SW_ACTIVITY) + ata_port_for_each_link(link, ap) + ahci_init_sw_activity(link); + +} + +static int ahci_deinit_port(struct ata_port *ap, const char **emsg) +{ + int rc; + + /* disable DMA */ + rc = ahci_stop_engine(ap); + if (rc) { + *emsg = "failed to stop engine"; + return rc; + } + + /* disable FIS reception */ + rc = ahci_stop_fis_rx(ap); + if (rc) { + *emsg = "failed stop FIS RX"; + return rc; + } + + return 0; +} + +static int ahci_reset_controller(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 tmp; + + /* we must be in AHCI mode, before using anything + * AHCI-specific, such as HOST_RESET. + */ + ahci_enable_ahci(mmio); + + /* global controller reset */ + if (!ahci_skip_host_reset) { + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) { + writel(tmp | HOST_RESET, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + /* + * to perform host reset, OS should set HOST_RESET + * and poll until this bit is read to be "0". + * reset must complete within 1 second, or + * the hardware should be considered fried. + */ + tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, + HOST_RESET, 10, 1000); + + if (tmp & HOST_RESET) { + dev_printk(KERN_ERR, host->dev, + "controller reset failed (0x%x)\n", tmp); + return -EIO; + } + + /* turn on AHCI mode */ + ahci_enable_ahci(mmio); + + /* Some registers might be cleared on reset. Restore + * initial values. + */ + ahci_restore_initial_config(host); + } else + dev_printk(KERN_INFO, host->dev, + "skipping global host reset\n"); + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + + /* configure PCS */ + pci_read_config_word(pdev, 0x92, &tmp16); + if ((tmp16 & hpriv->port_map) != hpriv->port_map) { + tmp16 |= hpriv->port_map; + pci_write_config_word(pdev, 0x92, tmp16); + } + } + + return 0; +} + +static void ahci_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) + return; + + emp->activity++; + if (!timer_pending(&emp->timer)) + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); +} + +static void ahci_sw_activity_blink(unsigned long arg) +{ + struct ata_link *link = (struct ata_link *)arg; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + unsigned long led_message = emp->led_state; + u32 activity_led_state; + unsigned long flags; + + led_message &= EM_MSG_LED_VALUE; + led_message |= ap->port_no | (link->pmp << 8); + + /* check to see if we've had activity. If so, + * toggle state of LED and reset timer. If not, + * turn LED to desired idle state. + */ + spin_lock_irqsave(ap->lock, flags); + if (emp->saved_activity != emp->activity) { + emp->saved_activity = emp->activity; + /* get the current LED state */ + activity_led_state = led_message & EM_MSG_LED_VALUE_ON; + + if (activity_led_state) + activity_led_state = 0; + else + activity_led_state = 1; + + /* clear old state */ + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; + + /* toggle state */ + led_message |= (activity_led_state << 16); + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); + } else { + /* switch to idle */ + led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; + if (emp->blink_policy == BLINK_OFF) + led_message |= (1 << 16); + } + spin_unlock_irqrestore(ap->lock, flags); + ahci_transmit_led_message(ap, led_message, 4); +} + +static void ahci_init_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* init activity stats, setup timer */ + emp->saved_activity = emp->activity = 0; + setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); + + /* check our blink policy and set flag for link if it's enabled */ + if (emp->blink_policy) + link->flags |= ATA_LFLAG_SW_ACTIVITY; +} + +static int ahci_reset_em(struct ata_host *host) +{ + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) + return -EINVAL; + + writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); + return 0; +} + +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + u32 message[] = {0, 0}; + unsigned long flags; + int pmp; + struct ahci_em_priv *emp; + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + /* + * if we are still busy transmitting a previous message, + * do not allow + */ + em_ctl = readl(mmio + HOST_EM_CTL); + if (em_ctl & EM_CTL_TM) { + spin_unlock_irqrestore(ap->lock, flags); + return -EINVAL; + } + + /* + * create message header - this is all zero except for + * the message size, which is 4 bytes. + */ + message[0] |= (4 << 8); + + /* ignore 0:4 of byte zero, fill in port info yourself */ + message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); + + /* write message to EM_LOC */ + writel(message[0], mmio + hpriv->em_loc); + writel(message[1], mmio + hpriv->em_loc+4); + + /* save off new led state for port/slot */ + emp->led_state = message[1]; + + /* + * tell hardware to transmit the message + */ + writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); + + spin_unlock_irqrestore(ap->lock, flags); + return size; +} + +static ssize_t ahci_led_show(struct ata_port *ap, char *buf) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + int rc = 0; + + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + rc += sprintf(buf, "%lx\n", emp->led_state); + } + return rc; +} + +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size) +{ + int state; + int pmp; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp; + + state = simple_strtoul(buf, NULL, 0); + + /* get the slot number from the message */ + pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + /* mask off the activity bits if we are in sw_activity + * mode, user should turn off sw_activity before setting + * activity led through em_message + */ + if (emp->blink_policy) + state &= ~EM_MSG_LED_VALUE_ACTIVITY; + + return ahci_transmit_led_message(ap, state, size); +} + +static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + u32 port_led_state = emp->led_state; + + /* save the desired Activity LED behavior */ + if (val == OFF) { + /* clear LFLAG */ + link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); + + /* set the LED to OFF */ + port_led_state &= EM_MSG_LED_VALUE_OFF; + port_led_state |= (ap->port_no | (link->pmp << 8)); + ahci_transmit_led_message(ap, port_led_state, 4); + } else { + link->flags |= ATA_LFLAG_SW_ACTIVITY; + if (val == BLINK_OFF) { + /* set LED to ON for idle */ + port_led_state &= EM_MSG_LED_VALUE_OFF; + port_led_state |= (ap->port_no | (link->pmp << 8)); + port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ + ahci_transmit_led_message(ap, port_led_state, 4); + } + } + emp->blink_policy = val; + return 0; +} + +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* display the saved value of activity behavior for this + * disk. + */ + return sprintf(buf, "%d\n", emp->blink_policy); +} + +static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, + int port_no, void __iomem *mmio, + void __iomem *port_mmio) +{ + const char *emsg = NULL; + int rc; + u32 tmp; + + /* make sure port is not active */ + rc = ahci_deinit_port(ap, &emsg); + if (rc) + dev_printk(KERN_WARNING, &pdev->dev, + "%s (%d)\n", emsg, rc); + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << port_no, mmio + HOST_IRQ_STAT); +} + +static void ahci_init_controller(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + int i; + void __iomem *port_mmio; + u32 tmp; + int mv; + + if (hpriv->flags & AHCI_HFLAG_MV_PATA) { + if (pdev->device == 0x6121) + mv = 2; + else + mv = 4; + port_mmio = __ahci_port_base(host, mv); + + writel(0, port_mmio + PORT_IRQ_MASK); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + } + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + port_mmio = ahci_port_base(ap); + if (ata_port_is_dummy(ap)) + continue; + + ahci_port_init(pdev, ap, i, mmio, port_mmio); + } + + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + VPRINTK("HOST_CTL 0x%x\n", tmp); +} + +static void ahci_dev_config(struct ata_device *dev) +{ + struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; + + if (hpriv->flags & AHCI_HFLAG_SECT255) { + dev->max_sectors = 255; + ata_dev_printk(dev, KERN_INFO, + "SB600 AHCI: limiting to 255 sectors per cmd\n"); + } +} + +static unsigned int ahci_dev_classify(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_taskfile tf; + u32 tmp; + + tmp = readl(port_mmio + PORT_SIG); + tf.lbah = (tmp >> 24) & 0xff; + tf.lbam = (tmp >> 16) & 0xff; + tf.lbal = (tmp >> 8) & 0xff; + tf.nsect = (tmp) & 0xff; + + return ata_dev_classify(&tf); +} + +static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) +{ + dma_addr_t cmd_tbl_dma; + + cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; + + pp->cmd_slot[tag].opts = cpu_to_le32(opts); + pp->cmd_slot[tag].status = 0; + pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); + pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); +} + +static int ahci_kick_engine(struct ata_port *ap, int force_restart) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_host_priv *hpriv = ap->host->private_data; + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 tmp; + int busy, rc; + + /* do we need to kick the port? */ + busy = status & (ATA_BUSY | ATA_DRQ); + if (!busy && !force_restart) + return 0; + + /* stop engine */ + rc = ahci_stop_engine(ap); + if (rc) + goto out_restart; + + /* need to do CLO? */ + if (!busy) { + rc = 0; + goto out_restart; + } + + if (!(hpriv->cap & HOST_CAP_CLO)) { + rc = -EOPNOTSUPP; + goto out_restart; + } + + /* perform CLO */ + tmp = readl(port_mmio + PORT_CMD); + tmp |= PORT_CMD_CLO; + writel(tmp, port_mmio + PORT_CMD); + + rc = 0; + tmp = ata_wait_register(port_mmio + PORT_CMD, + PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); + if (tmp & PORT_CMD_CLO) + rc = -EIO; + + /* restart engine */ + out_restart: + ahci_start_engine(ap); + return rc; +} + +static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, + struct ata_taskfile *tf, int is_cmd, u16 flags, + unsigned long timeout_msec) +{ + const u32 cmd_fis_len = 5; /* five dwords */ + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u8 *fis = pp->cmd_tbl; + u32 tmp; + + /* prep the command */ + ata_tf_to_fis(tf, pmp, is_cmd, fis); + ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); + + /* issue & wait */ + writel(1, port_mmio + PORT_CMD_ISSUE); + + if (timeout_msec) { + tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, + 1, timeout_msec); + if (tmp & 0x1) { + ahci_kick_engine(ap, 1); + return -EBUSY; + } + } else + readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + return 0; +} + +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) +{ + struct ata_port *ap = link->ap; + const char *reason = NULL; + unsigned long now, msecs; + struct ata_taskfile tf; + int rc; + + DPRINTK("ENTER\n"); + + /* prepare for SRST (AHCI-1.1 10.4.1) */ + rc = ahci_kick_engine(ap, 1); + if (rc && rc != -EOPNOTSUPP) + ata_link_printk(link, KERN_WARNING, + "failed to reset engine (errno=%d)\n", rc); + + ata_tf_init(link->device, &tf); + + /* issue the first D2H Register FIS */ + msecs = 0; + now = jiffies; + if (time_after(now, deadline)) + msecs = jiffies_to_msecs(deadline - now); + + tf.ctl |= ATA_SRST; + if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, + AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { + rc = -EIO; + reason = "1st FIS failed"; + goto fail; + } + + /* spec says at least 5us, but be generous and sleep for 1ms */ + msleep(1); + + /* issue the second D2H Register FIS */ + tf.ctl &= ~ATA_SRST; + ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); + + /* wait for link to become ready */ + rc = ata_wait_after_reset(link, deadline, check_ready); + /* link occupied, -ENODEV too is an error */ + if (rc) { + reason = "device not ready"; + goto fail; + } + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; + + fail: + ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); + return rc; +} + +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + +static int ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = 0x80; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, timing, deadline, &online, + ahci_check_ready); + + ahci_start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + return rc; +} + +static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + bool online; + int rc; + + DPRINTK("ENTER\n"); + + ahci_stop_engine(ap); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); + + ahci_start_engine(ap); + + DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); + + /* vt8251 doesn't clear BSY on signature FIS reception, + * request follow-up softreset. + */ + return online ? -EAGAIN : rc; +} + +static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + struct ata_taskfile tf; + bool online; + int rc; + + ahci_stop_engine(ap); + + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.command = 0x80; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + + rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), + deadline, &online, NULL); + + ahci_start_engine(ap); + + /* The pseudo configuration device on SIMG4726 attached to + * ASUS P5W-DH Deluxe doesn't send signature FIS after + * hardreset if no device is attached to the first downstream + * port && the pseudo device locks up on SRST w/ PMP==0. To + * work around this, wait for !BSY only briefly. If BSY isn't + * cleared, perform CLO and proceed to IDENTIFY (achieved by + * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA). + * + * Wait for two seconds. Devices attached to downstream port + * which can't process the following IDENTIFY after this will + * have to be reset again. For most cases, this should + * suffice while making probing snappish enough. + */ + if (online) { + rc = ata_wait_after_reset(link, jiffies + 2 * HZ, + ahci_check_ready); + if (rc) + ahci_kick_engine(ap, 0); + } + return rc; +} + +static void ahci_postreset(struct ata_link *link, unsigned int *class) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + u32 new_tmp, tmp; + + ata_std_postreset(link, class); + + /* Make sure port's ATAPI bit is set appropriately */ + new_tmp = tmp = readl(port_mmio + PORT_CMD); + if (*class == ATA_DEV_ATAPI) + new_tmp |= PORT_CMD_ATAPI; + else + new_tmp &= ~PORT_CMD_ATAPI; + if (new_tmp != tmp) { + writel(new_tmp, port_mmio + PORT_CMD); + readl(port_mmio + PORT_CMD); /* flush */ + } +} + +static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); + } + + return si; +} + +static void ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = ata_is_atapi(qc->tf.protocol); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + */ + opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->tag, opts); +} + +static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + struct ata_eh_info *host_ehi = &ap->link.eh_info; + struct ata_link *link = NULL; + struct ata_queued_cmd *active_qc; + struct ata_eh_info *active_ehi; + u32 serror; + + /* determine active link */ + ata_port_for_each_link(link, ap) + if (ata_link_active(link)) + break; + if (!link) + link = &ap->link; + + active_qc = ata_qc_from_tag(ap, link->active_tag); + active_ehi = &link->eh_info; + + /* record irq stat */ + ata_ehi_clear_desc(host_ehi); + ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); + + /* AHCI needs SError cleared; otherwise, it might lock up */ + ahci_scr_read(&ap->link, SCR_ERROR, &serror); + ahci_scr_write(&ap->link, SCR_ERROR, serror); + host_ehi->serror |= serror; + + /* some controllers set IRQ_IF_ERR on device errors, ignore it */ + if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) + irq_stat &= ~PORT_IRQ_IF_ERR; + + if (irq_stat & PORT_IRQ_TF_ERR) { + /* If qc is active, charge it; otherwise, the active + * link. There's no active qc on NCQ errors. It will + * be determined by EH by reading log page 10h. + */ + if (active_qc) + active_qc->err_mask |= AC_ERR_DEV; + else + active_ehi->err_mask |= AC_ERR_DEV; + + if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) + host_ehi->serror &= ~SERR_INTERNAL; + } + + if (irq_stat & PORT_IRQ_UNK_FIS) { + u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); + + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(active_ehi, + "unknown FIS %08x %08x %08x %08x" , + unk[0], unk[1], unk[2], unk[3]); + } + + if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { + active_ehi->err_mask |= AC_ERR_HSM; + active_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(active_ehi, "incorrect PMP"); + } + + if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { + host_ehi->err_mask |= AC_ERR_HOST_BUS; + host_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(host_ehi, "host bus error"); + } + + if (irq_stat & PORT_IRQ_IF_ERR) { + host_ehi->err_mask |= AC_ERR_ATA_BUS; + host_ehi->action |= ATA_EH_RESET; + ata_ehi_push_desc(host_ehi, "interface fatal error"); + } + + if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { + ata_ehi_hotplugged(host_ehi); + ata_ehi_push_desc(host_ehi, "%s", + irq_stat & PORT_IRQ_CONNECT ? + "connection status changed" : "PHY RDY changed"); + } + + /* okay, let's hand over to EH */ + + if (irq_stat & PORT_IRQ_FREEZE) + ata_port_freeze(ap); + else + ata_port_abort(ap); +} + +static void ahci_port_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_host_priv *hpriv = ap->host->private_data; + int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); + u32 status, qc_active; + int rc; + + status = readl(port_mmio + PORT_IRQ_STAT); + writel(status, port_mmio + PORT_IRQ_STAT); + + /* ignore BAD_PMP while resetting */ + if (unlikely(resetting)) + status &= ~PORT_IRQ_BAD_PMP; + + /* If we are getting PhyRdy, this is + * just a power state change, we should + * clear out this, plus the PhyRdy/Comm + * Wake bits from Serror + */ + if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && + (status & PORT_IRQ_PHYRDY)) { + status &= ~PORT_IRQ_PHYRDY; + ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); + } + + if (unlikely(status & PORT_IRQ_ERROR)) { + ahci_error_intr(ap, status); + return; + } + + if (status & PORT_IRQ_SDB_FIS) { + /* If SNotification is available, leave notification + * handling to sata_async_notification(). If not, + * emulate it by snooping SDB FIS RX area. + * + * Snooping FIS RX area is probably cheaper than + * poking SNotification but some constrollers which + * implement SNotification, ICH9 for example, don't + * store AN SDB FIS into receive area. + */ + if (hpriv->cap & HOST_CAP_SNTF) + sata_async_notification(ap); + else { + /* If the 'N' bit in word 0 of the FIS is set, + * we just received asynchronous notification. + * Tell libata about it. + */ + const __le32 *f = pp->rx_fis + RX_FIS_SDB; + u32 f0 = le32_to_cpu(f[0]); + + if (f0 & (1 << 15)) + sata_async_notification(ap); + } + } + + /* pp->active_link is valid iff any command is in flight */ + if (ap->qc_active && pp->active_link->sactive) + qc_active = readl(port_mmio + PORT_SCR_ACT); + else + qc_active = readl(port_mmio + PORT_CMD_ISSUE); + + rc = ata_qc_complete_multiple(ap, qc_active); + + /* while resetting, invalid completions are expected */ + if (unlikely(rc < 0 && !resetting)) { + ehi->err_mask |= AC_ERR_HSM; + ehi->action |= ATA_EH_RESET; + ata_port_freeze(ap); + } +} + +static irqreturn_t ahci_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int i, handled = 0; + void __iomem *mmio; + u32 irq_stat, irq_masked; + + VPRINTK("ENTER\n"); + + hpriv = host->private_data; + mmio = host->iomap[AHCI_PCI_BAR]; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + if (!irq_stat) + return IRQ_NONE; + + irq_masked = irq_stat & hpriv->port_map; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + if (!(irq_masked & (1 << i))) + continue; + + ap = host->ports[i]; + if (ap) { + ahci_port_intr(ap); + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) + dev_printk(KERN_WARNING, host->dev, + "interrupt on disabled port %u\n", i); + } + + handled = 1; + } + + /* HOST_IRQ_STAT behaves as level triggered latch meaning that + * it should be cleared after all the port events are cleared; + * otherwise, it will raise a spurious interrupt after each + * valid one. Please read section 10.6.2 of ahci 1.1 for more + * information. + * + * Also, use the unmasked value to clear interrupt as spurious + * pending event on a dummy port might cause screaming IRQ. + */ + writel(irq_stat, mmio + HOST_IRQ_STAT); + + spin_unlock(&host->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(handled); +} + +static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + + /* Keep track of the currently active link. It will be used + * in completion path to determine whether NCQ phase is in + * progress. + */ + pp->active_link = qc->dev->link; + + if (qc->tf.protocol == ATA_PROT_NCQ) + writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); + writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); + + ahci_sw_activity(qc->dev->link); + + return 0; +} + +static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + + ata_tf_from_fis(d2h_fis, &qc->result_tf); + return true; +} + +static void ahci_freeze(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + + /* turn IRQ off */ + writel(0, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + struct ahci_port_priv *pp = ap->private_data; + + /* clear IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + writel(tmp, port_mmio + PORT_IRQ_STAT); + writel(1 << ap->port_no, mmio + HOST_IRQ_STAT); + + /* turn IRQ back on */ + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { + /* restart engine */ + ahci_stop_engine(ap); + ahci_start_engine(ap); + } + + sata_pmp_error_handler(ap); +} + +static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + ahci_kick_engine(ap, 1); +} + +static void ahci_pmp_attach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + pp->intr_mask |= PORT_IRQ_BAD_PMP; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +static void ahci_pmp_detach(struct ata_port *ap) +{ + void __iomem *port_mmio = ahci_port_base(ap); + struct ahci_port_priv *pp = ap->private_data; + u32 cmd; + + cmd = readl(port_mmio + PORT_CMD); + cmd &= ~PORT_CMD_PMP; + writel(cmd, port_mmio + PORT_CMD); + + pp->intr_mask &= ~PORT_IRQ_BAD_PMP; + writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); +} + +static int ahci_port_resume(struct ata_port *ap) +{ + ahci_power_up(ap); + ahci_start_port(ap); + + if (sata_pmp_attached(ap)) + ahci_pmp_attach(ap); + else + ahci_pmp_detach(ap); + + return 0; +} + +#ifdef CONFIG_PM +static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + const char *emsg = NULL; + int rc; + + rc = ahci_deinit_port(ap, &emsg); + if (rc == 0) + ahci_power_down(ap); + else { + ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc); + ahci_start_port(ap); + } + + return rc; +} + +static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 ctl; + + if (mesg.event & PM_EVENT_SLEEP) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int ahci_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct ahci_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += AHCI_RX_FIS_SZ; + mem_dma += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + + ap->private_data = pp; + + /* engage engines, captain */ + return ahci_port_resume(ap); +} + +static void ahci_port_stop(struct ata_port *ap) +{ + const char *emsg = NULL; + int rc; + + /* de-initialize port */ + rc = ahci_deinit_port(ap, &emsg); + if (rc) + ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc); +} + +static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +{ + int rc; + + if (using_dac && + !pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static void ahci_print_info(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 vers, cap, impl, speed; + const char *speed_s; + u16 cc; + const char *scc_s; + + vers = readl(mmio + HOST_VERSION); + cap = hpriv->cap; + impl = hpriv->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else + speed_s = "?"; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == PCI_CLASS_STORAGE_IDE) + scc_s = "IDE"; + else if (cc == PCI_CLASS_STORAGE_SATA) + scc_s = "SATA"; + else if (cc == PCI_CLASS_STORAGE_RAID) + scc_s = "RAID"; + else + scc_s = "unknown"; + + dev_printk(KERN_INFO, &pdev->dev, + "AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n" + , + + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + + ((cap >> 8) & 0x1f) + 1, + (cap & 0x1f) + 1, + speed_s, + impl, + scc_s); + + dev_printk(KERN_INFO, &pdev->dev, + "flags: " + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s\n" + , + + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 29) ? "sntf " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : "", + cap & (1 << 6) ? "ems ": "" + ); +} + +/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is + * hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't + * support PMP and the 4726 either directly exports the device + * attached to the first downstream port or acts as a hardware storage + * controller and emulate a single ATA device (can be RAID 0/1 or some + * other configuration). + * + * When there's no device attached to the first downstream port of the + * 4726, "Config Disk" appears, which is a pseudo ATA device to + * configure the 4726. However, ATA emulation of the device is very + * lame. It doesn't send signature D2H Reg FIS after the initial + * hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues. + * + * The following function works around the problem by always using + * hardreset on the port and not depending on receiving signature FIS + * afterward. If signature FIS isn't received soon, ATA class is + * assumed without follow-up softreset. + */ +static void ahci_p5wdh_workaround(struct ata_host *host) +{ + static struct dmi_system_id sysids[] = { + { + .ident = "P5W DH Deluxe", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "ASUSTEK COMPUTER INC"), + DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"), + }, + }, + { } + }; + struct pci_dev *pdev = to_pci_dev(host->dev); + + if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) && + dmi_check_system(sysids)) { + struct ata_port *ap = host->ports[1]; + + dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH " + "Deluxe on-board SIMG4726 workaround\n"); + + ap->ops = &ahci_p5wdh_ops; + ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA; + } +} + +static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + int n_ports, i, rc; + + VPRINTK("ENTER\n"); + + WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* The AHCI driver can only drive the SATA ports, the PATA driver + can drive them all so if both drivers are selected make sure + AHCI stays out of the way */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable) + return -ENODEV; + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == 0x2652 || pdev->device == 0x2653)) { + u8 map; + + /* ICH6s share the same PCI ID for both piix and ahci + * modes. Enabling ahci mode while MAP indicates + * combined mode is a bad idea. Yield to ata_piix. + */ + pci_read_config_byte(pdev, ICH_MAP, &map); + if (map & 0x3) { + dev_printk(KERN_INFO, &pdev->dev, "controller is in " + "combined mode, can't enable AHCI mode\n"); + return -ENODEV; + } + } + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + hpriv->flags |= (unsigned long)pi.private_data; + + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) + pci_intx(pdev, 1); + + /* save initial config */ + ahci_save_initial_config(pdev, hpriv); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) { + u8 messages; + void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + u32 em_loc = readl(mmio + HOST_EM_LOC); + u32 em_ctl = readl(mmio + HOST_EM_CTL); + + messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16; + + /* we only support LED message type right now */ + if ((messages & 0x01) && (ahci_em_messages == 1)) { + /* store em_loc */ + hpriv->em_loc = ((em_loc >> 16) * 4); + pi.flags |= ATA_FLAG_EM; + if (!(em_ctl & EM_CTL_ALHD)) + pi.flags |= ATA_FLAG_SW_ACTIVITY; + } + } + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + host->iomap = pcim_iomap_table(pdev); + host->private_data = hpriv; + + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + + /* set initial link pm policy */ + ap->pm_policy = NOT_AVAILABLE; + + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = ahci_em_messages; + + + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + /* apply workaround for ASUS P5W DH Deluxe mainboard */ + ahci_p5wdh_workaround(host); + + /* initialize adapter */ + rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + if (rc) + return rc; + + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + ahci_print_info(host); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED, + &ahci_sht); +} + +static int __init ahci_init(void) +{ + return pci_register_driver(&ahci_pci_driver); +} + +static void __exit ahci_exit(void) +{ + pci_unregister_driver(&ahci_pci_driver); +} + + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(ahci_init); +module_exit(ahci_exit); |
