diff options
Diffstat (limited to 'arch/arm/mach-aaec2000/core.c')
| -rw-r--r-- | arch/arm/mach-aaec2000/core.c | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c new file mode 100644 index 0000000..dfb26bc --- /dev/null +++ b/arch/arm/mach-aaec2000/core.c @@ -0,0 +1,280 @@ +/* + * linux/arch/arm/mach-aaec2000/core.c + * + * Code common to all AAEC-2000 machines + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/signal.h> + +#include <mach/hardware.h> +#include <asm/irq.h> +#include <asm/sizes.h> + +#include <asm/mach/flash.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +#include "core.h" +#include "clock.h" + +/* + * Common I/O mapping: + * + * Static virtual address mappings are as follow: + * + * 0xf8000000-0xf8001ffff: Devices connected to APB bus + * 0xf8002000-0xf8003ffff: Devices connected to AHB bus + * + * Below 0xe8000000 is reserved for vm allocation. + * + * The machine specific code must provide the extra mapping beside the + * default mapping provided here. + */ +static struct map_desc standard_io_desc[] __initdata = { + { + .virtual = VIO_APB_BASE, + .pfn = __phys_to_pfn(PIO_APB_BASE), + .length = IO_APB_LENGTH, + .type = MT_DEVICE + }, { + .virtual = VIO_AHB_BASE, + .pfn = __phys_to_pfn(PIO_AHB_BASE), + .length = IO_AHB_LENGTH, + .type = MT_DEVICE + } +}; + +void __init aaec2000_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} + +/* + * Interrupt handling routines + */ +static void aaec2000_int_ack(unsigned int irq) +{ + IRQ_INTSR = 1 << irq; +} + +static void aaec2000_int_mask(unsigned int irq) +{ + IRQ_INTENC |= (1 << irq); +} + +static void aaec2000_int_unmask(unsigned int irq) +{ + IRQ_INTENS |= (1 << irq); +} + +static struct irq_chip aaec2000_irq_chip = { + .ack = aaec2000_int_ack, + .mask = aaec2000_int_mask, + .unmask = aaec2000_int_unmask, +}; + +void __init aaec2000_init_irq(void) +{ + unsigned int i; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_handler(i, handle_level_irq); + set_irq_chip(i, &aaec2000_irq_chip); + set_irq_flags(i, IRQF_VALID); + } + + /* Disable all interrupts */ + IRQ_INTENC = 0xffffffff; + + /* Clear any pending interrupts */ + IRQ_INTSR = IRQ_INTSR; +} + +/* + * Time keeping + */ +/* IRQs are disabled before entering here from do_gettimeofday() */ +static unsigned long aaec2000_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec; + + /* Get ticks before next timer match */ + ticks_to_match = TIMER1_LOAD - TIMER1_VAL; + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now, convert them to usec */ + usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; + + return usec; +} + +/* We enter here with IRQs enabled */ +static irqreturn_t +aaec2000_timer_interrupt(int irq, void *dev_id) +{ + /* TODO: Check timer accuracy */ + timer_tick(); + TIMER1_CLEAR = 1; + + return IRQ_HANDLED; +} + +static struct irqaction aaec2000_timer_irq = { + .name = "AAEC-2000 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = aaec2000_timer_interrupt, +}; + +static void __init aaec2000_timer_init(void) +{ + /* Disable timer 1 */ + TIMER1_CTRL = 0; + + /* We have somehow to generate a 100Hz clock. + * We then use the 508KHz timer in periodic mode. + */ + TIMER1_LOAD = LATCH; + TIMER1_CLEAR = 1; /* Clear interrupt */ + + setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq); + + TIMER1_CTRL = TIMER_CTRL_ENABLE | + TIMER_CTRL_PERIODIC | + TIMER_CTRL_CLKSEL_508K; +} + +struct sys_timer aaec2000_timer = { + .init = aaec2000_timer_init, + .offset = aaec2000_gettimeoffset, +}; + +static struct clcd_panel mach_clcd_panel; + +static int aaec2000_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = &mach_clcd_panel; + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M, + &dma, GFP_KERNEL); + + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = SZ_1M; + + return 0; +} + +static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void aaec2000_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board clcd_plat_data = { + .name = "AAEC-2000", + .check = clcdfb_check, + .decode = clcdfb_decode, + .setup = aaec2000_clcd_setup, + .mmap = aaec2000_clcd_mmap, + .remove = aaec2000_clcd_remove, +}; + +static struct amba_device clcd_device = { + .dev = { + .bus_id = "mb:16", + .coherent_dma_mask = ~0, + .platform_data = &clcd_plat_data, + }, + .res = { + .start = AAEC_CLCD_PHYS, + .end = AAEC_CLCD_PHYS + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { INT_LCD, NO_IRQ }, + .periphid = 0x41110, +}; + +static struct amba_device *amba_devs[] __initdata = { + &clcd_device, +}; + +static struct clk aaec2000_clcd_clk = { + .name = "CLCDCLK", +}; + +void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd) +{ + clcd_plat_data.enable = clcd->enable; + clcd_plat_data.disable = clcd->disable; + memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel)); +} + +static struct flash_platform_data aaec2000_flash_data = { + .map_name = "cfi_probe", + .width = 4, +}; + +static struct resource aaec2000_flash_resource = { + .start = AAEC_FLASH_BASE, + .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device aaec2000_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &aaec2000_flash_data, + }, + .num_resources = 1, + .resource = &aaec2000_flash_resource, +}; + +static int __init aaec2000_init(void) +{ + int i; + + clk_register(&aaec2000_clcd_clk); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + + platform_device_register(&aaec2000_flash_device); + + return 0; +}; +arch_initcall(aaec2000_init); + |
