/* * This file is part of the flashrom project. * * Copyright (C) 2005-2007 coresystems GmbH * Copyright (C) 2006 Uwe Hermann * Copyright (C) 2007-2008 Luc Verhaegen * Copyright (C) 2007 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* * Contains the board specific flash enables. */ #include #include #include #include #include #include "flash.h" /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ /* Enter extended functions */ void w836xx_ext_enter(uint16_t port) { OUTB(0x87, port); OUTB(0x87, port); } /* Leave extended functions */ void w836xx_ext_leave(uint16_t port) { OUTB(0xAA, port); } /* General functions for reading/writing Winbond Super I/Os. */ unsigned char wbsio_read(uint16_t index, uint8_t reg) { OUTB(reg, index); return INB(index + 1); } void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { OUTB(reg, index); OUTB(data, index + 1); } void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { uint8_t tmp; OUTB(reg, index); tmp = INB(index + 1) & ~mask; OUTB(tmp | (data & mask), index + 1); } /** * Winbond W83627HF: Raise GPIO24. * * Suited for: * - Agami Aruma * - IWILL DK8-HTX */ static int w83627hf_gpio24_raise(uint16_t index, const char *name) { w836xx_ext_enter(index); /* Is this the W83627HF? */ if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", name, wbsio_read(index, 0x20)); w836xx_ext_leave(index); return -1; } /* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ wbsio_mask(index, 0x2B, 0x10, 0x10); /* Select logical device 8: GPIO port 2 */ wbsio_write(index, 0x07, 0x08); wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */ wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */ wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */ w836xx_ext_leave(index); return 0; } static int w83627hf_gpio24_raise_2e(const char *name) { /* TODO: Typo? Shouldn't this be 0x2e? */ return w83627hf_gpio24_raise(0x2d, name); } /** * Winbond W83627THF: GPIO 4, bit 4 * * Suited for: * - MSI K8T Neo2-F * - MSI K8N-NEO3 */ static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) { w836xx_ext_enter(index); /* Is this the W83627THF? */ if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */ fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", name, wbsio_read(index, 0x20)); w836xx_ext_leave(index); return -1; } /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */ wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ w836xx_ext_leave(index); return 0; } static int w83627thf_gpio4_4_raise_2e(const char *name) { return w83627thf_gpio4_4_raise(0x2e, name); } static int w83627thf_gpio4_4_raise_4e(const char *name) { return w83627thf_gpio4_4_raise(0x4e, name); } /** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this when using coreboot, GPIO15 is never lowered there. */ static int board_via_epia_m(const char *name) { struct pci_dev *dev; uint16_t base; uint8_t val; dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n"); return -1; } /* GPIO12-15 -> output */ val = pci_read_byte(dev, 0xE4); val |= 0x10; pci_write_byte(dev, 0xE4, val); /* Get Power Management IO address. */ base = pci_read_word(dev, 0x88) & 0xFF80; /* Enable GPIO15 which is connected to write protect. */ val = INB(base + 0x4D); val |= 0x80; OUTB(val, base + 0x4D); return 0; } /** * Suited for: * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 * - Tyan Tomcat K7M: AMD Geode NX + VIA KM400 + VT8237. */ static int board_asus_a7v8x_mx(const char *name) { struct pci_dev *dev; uint8_t val; dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ if (!dev) dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); return -1; } /* This bit is marked reserved actually. */ val = pci_read_byte(dev, 0x59); val &= 0x7F; pci_write_byte(dev, 0x59, val); /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */ w836xx_ext_enter(0x2E); if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */ wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */ w836xx_ext_leave(0x2E); return 0; } /** * Suited for VIAs EPIA SP. */ static int board_via_epia_sp(const char *name) { struct pci_dev *dev; uint8_t val; dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n"); return -1; } /* All memory cycles, not just ROM ones, go to LPC */ val = pci_read_byte(dev, 0x59); val &= ~0x80; pci_write_byte(dev, 0x59, val); return 0; } /** * Suited for ASUS P5A. * * This is rather nasty code, but there's no way to do this cleanly. * We're basically talking to some unknown device on SMBus, my guess * is that it is the Winbond W83781D that lives near the DIP BIOS. */ static int board_asus_p5a(const char *name) { uint8_t tmp; int i; #define ASUSP5A_LOOP 5000 OUTB(0x00, 0xE807); OUTB(0xEF, 0xE803); OUTB(0xFF, 0xE800); for (i = 0; i < ASUSP5A_LOOP; i++) { OUTB(0xE1, 0xFF); if (INB(0xE800) & 0x04) break; } if (i == ASUSP5A_LOOP) { printf("%s: Unable to contact device.\n", name); return -1; } OUTB(0x20, 0xE801); OUTB(0x20, 0xE1); OUTB(0xFF, 0xE802); for (i = 0; i < ASUSP5A_LOOP; i++) { tmp = INB(0xE800); if (tmp & 0x70) break; } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { printf("%s: failed to read device.\n", name); return -1; } tmp = INB(0xE804); tmp &= ~0x02; OUTB(0x00, 0xE807); OUTB(0xEE, 0xE803); OUTB(tmp, 0xE804); OUTB(0xFF, 0xE800); OUTB(0xE1, 0xFF); OUTB(0x20, 0xE801); OUTB(0x20, 0xE1); OUTB(0xFF, 0xE802); for (i = 0; i < ASUSP5A_LOOP; i++) { tmp = INB(0xE800); if (tmp & 0x70) break; } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { printf("%s: failed to write to device.\n", name); return -1; } return 0; } static int board_ibm_x3455(const char *name) { uint8_t byte; /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ OUTB(0x45, 0xcd6); byte = INB(0xcd7); OUTB(byte | 0x20, 0xcd7); return 0; } /** * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards. */ static int board_epox_ep_bx3(const char *name) { uint8_t tmp; /* Raise GPIO22. */ tmp = INB(0x4036); OUTB(tmp, 0xEB); tmp |= 0x40; OUTB(tmp, 0x4036); OUTB(tmp, 0xEB); return 0; } /** * Suited for Acorp 6A815EPD. */ static int board_acorp_6a815epd(const char *name) { struct pci_dev *dev; uint16_t port; uint8_t val; dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */ if (!dev) { fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n"); return -1; } /* Use GPIOBASE register to find where the GPIO is mapped. */ port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE; val = INB(port); val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */ val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */ OUTB(val, port); return 0; } /** * Suited for Artec Group DBE61 and DBE62. */ static int board_artecgroup_dbe6x(const char *name) { #define DBE6x_MSR_DIVIL_BALL_OPTS 0x51400015 #define DBE6x_PRI_BOOT_LOC_SHIFT (2) #define DBE6x_BOOT_OP_LATCHED_SHIFT (8) #define DBE6x_SEC_BOOT_LOC_SHIFT (10) #define DBE6x_PRI_BOOT_LOC (3 << DBE6x_PRI_BOOT_LOC_SHIFT) #define DBE6x_BOOT_OP_LATCHED (3 << DBE6x_BOOT_OP_LATCHED_SHIFT) #define DBE6x_SEC_BOOT_LOC (3 << DBE6x_SEC_BOOT_LOC_SHIFT) #define DBE6x_BOOT_LOC_FLASH (2) #define DBE6x_BOOT_LOC_FWHUB (3) unsigned long msr[2]; int msr_fd; unsigned long boot_loc; msr_fd = open("/dev/cpu/0/msr", O_RDWR); if (msr_fd == -1) { perror("open /dev/cpu/0/msr"); return -1; } if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) { perror("lseek"); close(msr_fd); return -1; } if (read(msr_fd, (void *)msr, 8) != 8) { perror("read"); close(msr_fd); return -1; } if ((msr[0] & (DBE6x_BOOT_OP_LATCHED)) == (DBE6x_BOOT_LOC_FWHUB << DBE6x_BOOT_OP_LATCHED_SHIFT)) boot_loc = DBE6x_BOOT_LOC_FWHUB; else boot_loc = DBE6x_BOOT_LOC_FLASH; msr[0] &= ~(DBE6x_PRI_BOOT_LOC | DBE6x_SEC_BOOT_LOC); msr[0] |= ((boot_loc << DBE6x_PRI_BOOT_LOC_SHIFT) | (boot_loc << DBE6x_SEC_BOOT_LOC_SHIFT)); if (lseek(msr_fd, DBE6x_MSR_DIVIL_BALL_OPTS, SEEK_SET) == -1) { perror("lseek"); close(msr_fd); return -1; } if (write(msr_fd, (void *)msr, 8) != 8) { perror("write"); close(msr_fd); return -1; } close(msr_fd); return 0; } /** * Set the specified GPIO on the specified ICHx southbridge to high. * * @param name The name of this board. * @param ich_vendor PCI vendor ID of the specified ICHx southbridge. * @param ich_device PCI device ID of the specified ICHx southbridge. * @param gpiobase_reg GPIOBASE register offset in the LPC bridge. * @param gp_lvl Offset of GP_LVL register in I/O space, relative to GPIOBASE. * @param gp_lvl_bitmask GP_LVL bitmask (set GPIO bits to 1, all others to 0). * @param gpio_bit The bit (GPIO) which shall be set to high. * @return If the write-enable was successful return 0, otherwise return -1. */ static int ich_gpio_raise(const char *name, uint16_t ich_vendor, uint16_t ich_device, uint8_t gpiobase_reg, uint8_t gp_lvl, uint32_t gp_lvl_bitmask, unsigned int gpio_bit) { struct pci_dev *dev; uint16_t gpiobar; uint32_t reg32; dev = pci_dev_find(ich_vendor, ich_device); /* Intel ICHx LPC */ if (!dev) { fprintf(stderr, "\nERROR: ICHx LPC dev %4x:%4x not found.\n", ich_vendor, ich_device); return -1; } /* Use GPIOBASE register to find the I/O space for GPIO. */ gpiobar = pci_read_word(dev, gpiobase_reg) & gp_lvl_bitmask; /* Set specified GPIO to high. */ reg32 = INL(gpiobar + gp_lvl); reg32 |= (1 << gpio_bit); OUTL(reg32, gpiobar + gp_lvl); return 0; } /** * Suited for ASUS P4B266. */ static int ich2_gpio22_raise(const char *name) { return ich_gpio_raise(name, 0x8086, 0x2440, 0x58, 0x0c, 0xffc0, 22); } static int board_kontron_986lcd_m(const char *name) { struct pci_dev *dev; uint16_t gpiobar; uint32_t val; #define ICH7_GPIO_LVL2 0x38 dev = pci_dev_find(0x8086, 0x27b8); /* Intel ICH7 LPC */ if (!dev) { // This will never happen on this board fprintf(stderr, "\nERROR: ICH7 LPC bridge not found.\n"); return -1; } /* Use GPIOBASE register to find where the GPIO is mapped. */ gpiobar = pci_read_word(dev, 0x48) & 0xfffc; val = INL(gpiobar + ICH7_GPIO_LVL2); /* GP_LVL2 */ printf_debug("\nGPIOBAR=0x%04x GP_LVL: 0x%08x\n", gpiobar, val); /* bit 2 (0x04) = 0 #TBL --> bootblock locking = 1 * bit 2 (0x04) = 1 #TBL --> bootblock locking = 0 * bit 3 (0x08) = 0 #WP --> block locking = 1 * bit 3 (0x08) = 1 #WP --> block locking = 0 * * To enable full block locking, you would do: * val &= ~ ((1 << 2) | (1 << 3)); */ val |= (1 << 2) | (1 << 3); OUTL(val, gpiobar + ICH7_GPIO_LVL2); return 0; } /** * Suited for: * - BioStar P4M80-M4: Intel P4 + VIA P4M800 + VT8237 * - GIGABYTE GA-7VT600: AMD K7 + VIA KT600 + VT8237 */ static int board_biostar_p4m80_m4(const char *name) { /* enter IT87xx conf mode */ OUTB(0x87, 0x2e); OUTB(0x01, 0x2e); OUTB(0x55, 0x2e); OUTB(0x55, 0x2e); /* select right flash chip */ wbsio_mask(0x2e, 0x22, 0x80, 0x80); /* bit 3: flash chip write enable * bit 7: map flash chip at 1MB-128K (why though? ignoring this.) */ wbsio_mask(0x2e, 0x24, 0x04, 0x04); /* exit IT87xx conf mode */ wbsio_write(0x2, 0x2e, 0x2); return 0; } /** * Winbond W83697HF Super I/O + VIA VT8235 southbridge * * Suited for: * - MSI KT4V and KT4V-L: AMD K7 + VIA KT400 + VT8235 * - MSI KT3 Ultra2: AMD K7 + VIA KT333 + VT8235 */ static int board_msi_kt4v(const char *name) { struct pci_dev *dev; uint8_t val; uint32_t val2; uint16_t port; dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); return -1; } val = pci_read_byte(dev, 0x59); val &= 0x0c; pci_write_byte(dev, 0x59, val); /* We need the I/O Base Address for this board's flash enable. */ port = pci_read_word(dev, 0x88) & 0xff80; /* Starting at 'I/O Base + 0x4c' is the GPO Port Output Value. * We must assert GPO12 for our enable, which is in 0x4d. */ val2 = INB(port + 0x4d); val2 |= 0x10; OUTB(val2, port + 0x4d); /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */ w836xx_ext_enter(0x2e); if (!(wbsio_read(0x2e, 0x24) & 0x02)) { /* Flash ROM enabled? */ /* Enable MEMW# and set ROM size select to max. (4M). */ wbsio_mask(0x2e, 0x24, 0x28, 0x28); } w836xx_ext_leave(0x2e); return 0; } /** * We use 2 sets of IDs here, you're free to choose which is which. This * is to provide a very high degree of certainty when matching a board on * the basis of subsystem/card IDs. As not every vendor handles * subsystem/card IDs in a sane manner. * * Keep the second set NULLed if it should be ignored. * * Keep the subsystem IDs NULLed if they don't identify the board fully. */ struct board_pciid_enable { /* Any device, but make it sensible, like the ISA bridge. */ uint16_t first_vendor; uint16_t first_device; uint16_t first_card_vendor; uint16_t first_card_device; /* Any device, but make it sensible, like * the host bridge. May be NULL. */ uint16_t second_vendor; uint16_t second_device; uint16_t second_card_vendor; uint16_t second_card_device; /* The vendor / part name from the coreboot table. */ const char *lb_vendor; const char *lb_part; const char *name; int (*enable) (const char *name); }; struct board_pciid_enable board_pciid_enables[] = { { .first_vendor = 0x1106, .first_device = 0x0571, .first_card_vendor = 0x1462, .first_card_device = 0x7120, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "msi", .lb_part = "kt4v", .name = "MSI KT4V", .enable = board_msi_kt4v, }, { .first_vendor = 0x8086, .first_device = 0x1a30, .first_card_vendor = 0x1043, .first_card_device = 0x8070, .second_vendor = 0x8086, .second_device = 0x244b, .second_card_vendor = 0x1043, .second_card_device = 0x8028, .lb_vendor = NULL, .lb_part = NULL, .name = "ASUS P4B266", .enable = ich2_gpio22_raise, }, { .first_vendor = 0x10de, .first_device = 0x0360, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "gigabyte", .lb_part = "m57sli", .name = "GIGABYTE GA-M57SLI-S4", .enable = it87xx_probe_spi_flash, }, { .first_vendor = 0x10de, .first_device = 0x03e0, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "gigabyte", .lb_part = "m61p", .name = "GIGABYTE GA-M61P-S3", .enable = it87xx_probe_spi_flash, }, { .first_vendor = 0x1002, .first_device = 0x4398, .first_card_vendor = 0x1458, .first_card_device = 0x5004, .second_vendor = 0x1002, .second_device = 0x4385, .second_card_vendor = 0x1458, .second_card_device = 0x4385, .lb_vendor = NULL, .lb_part = NULL, .name = "GIGABYTE GA-MA78G-DS3H", .enable = it87xx_probe_spi_flash, }, { .first_vendor = 0x1039, .first_device = 0x0761, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "gigabyte", .lb_part = "2761gxdk", .name = "GIGABYTE GA-2761GXDK", .enable = it87xx_probe_spi_flash, }, { .first_vendor = 0x1022, .first_device = 0x7468, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "iwill", .lb_part = "dk8_htx", .name = "IWILL DK8-HTX", .enable = w83627hf_gpio24_raise_2e, }, { .first_vendor = 0x10de, .first_device = 0x005e, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "msi", .lb_part = "k8n-neo3", .name = "MSI K8N Neo3", .enable = w83627thf_gpio4_4_raise_4e, }, { .first_vendor = 0x1022, .first_device = 0x746B, .first_card_vendor = 0x1022, .first_card_device = 0x36C0, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "AGAMI", .lb_part = "ARUMA", .name = "agami Aruma", .enable = w83627hf_gpio24_raise_2e, }, { .first_vendor = 0x1106, .first_device = 0x3177, .first_card_vendor = 0x1106, .first_card_device = 0xAA01, .second_vendor = 0x1106, .second_device = 0x3123, .second_card_vendor = 0x1106, .second_card_device = 0xAA01, .lb_vendor = NULL, .lb_part = NULL, .name = "VIA EPIA M/MII/...", .enable = board_via_epia_m, }, { .first_vendor = 0x1106, .first_device = 0x3177, .first_card_vendor = 0x1043, .first_card_device = 0x80A1, .second_vendor = 0x1106, .second_device = 0x3205, .second_card_vendor = 0x1043, .second_card_device = 0x8118, .lb_vendor = NULL, .lb_part = NULL, .name = "ASUS A7V8-MX SE", .enable = board_asus_a7v8x_mx, }, { .first_vendor = 0x1106, .first_device = 0x3227, .first_card_vendor = 0x1106, .first_card_device = 0xAA01, .second_vendor = 0x1106, .second_device = 0x0259, .second_card_vendor = 0x1106, .second_card_device = 0xAA01, .lb_vendor = NULL, .lb_part = NULL, .name = "VIA EPIA SP", .enable = board_via_epia_sp, }, { .first_vendor = 0x1106, .first_device = 0x0314, .first_card_vendor = 0x1106, .first_card_device = 0xaa08, .second_vendor = 0x1106, .second_device = 0x3227, .second_card_vendor = 0x1106, .second_card_device = 0xAA08, .lb_vendor = NULL, .lb_part = NULL, .name = "VIA EPIA-CN", .enable = board_via_epia_sp, }, { .first_vendor = 0x8086, .first_device = 0x1076, .first_card_vendor = 0x8086, .first_card_device = 0x1176, .second_vendor = 0x1106, .second_device = 0x3059, .second_card_vendor = 0x10f1, .second_card_device = 0x2498, .lb_vendor = NULL, .lb_part = NULL, .name = "Tyan Tomcat K7M", .enable = board_asus_a7v8x_mx, }, { .first_vendor = 0x10B9, .first_device = 0x1541, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x10B9, .second_device = 0x1533, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "asus", .lb_part = "p5a", .name = "ASUS P5A", .enable = board_asus_p5a, }, { .first_vendor = 0x1166, .first_device = 0x0205, .first_card_vendor = 0x1014, .first_card_device = 0x0347, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "ibm", .lb_part = "x3455", .name = "IBM x3455", .enable = board_ibm_x3455, }, { .first_vendor = 0x8086, .first_device = 0x7110, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x8086, .second_device = 0x7190, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "epox", .lb_part = "ep-bx3", .name = "EPoX EP-BX3", .enable = board_epox_ep_bx3, }, { .first_vendor = 0x8086, .first_device = 0x1130, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x105a, .second_device = 0x0d30, .second_card_vendor = 0x105a, .second_card_device = 0x4d33, .lb_vendor = "acorp", .lb_part = "6a815epd", .name = "Acorp 6A815EPD", .enable = board_acorp_6a815epd, }, { .first_vendor = 0x1022, .first_device = 0x2090, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x1022, .second_device = 0x2080, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "artecgroup", .lb_part = "dbe61", .name = "Artec Group DBE61", .enable = board_artecgroup_dbe6x, }, { .first_vendor = 0x1022, .first_device = 0x2090, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x1022, .second_device = 0x2080, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "artecgroup", .lb_part = "dbe62", .name = "Artec Group DBE62", .enable = board_artecgroup_dbe6x, }, /* Note: There are >= 2 version of the Kontron 986LCD-M/mITX! */ { .first_vendor = 0x8086, .first_device = 0x27b8, .first_card_vendor = 0x0000, .first_card_device = 0x0000, .second_vendor = 0x0000, .second_device = 0x0000, .second_card_vendor = 0x0000, .second_card_device = 0x0000, .lb_vendor = "kontron", .lb_part = "986lcd-m", .name = "Kontron 986LCD-M", .enable = board_kontron_986lcd_m, }, { .first_vendor = 0x10ec, .first_device = 0x8168, .first_card_vendor = 0x10ec, .first_card_device = 0x8168, .second_vendor = 0x104c, .second_device = 0x8023, .second_card_vendor = 0x104c, .second_card_device = 0x8019, .lb_vendor = "kontron", .lb_part = "986lcd-m", .name = "Kontron 986LCD-M", .enable = board_kontron_986lcd_m, }, { .first_vendor = 0x1106, .first_device = 0x3149, .first_card_vendor = 0x1565, .first_card_device = 0x3206, .second_vendor = 0x1106, .second_device = 0x3344, .second_card_vendor = 0x1565, .second_card_device = 0x1202, .lb_vendor = NULL, .lb_part = NULL, .name = "BioStar P4M80-M4", .enable = board_biostar_p4m80_m4, }, { .first_vendor = 0x1106, .first_device = 0x3227, .first_card_vendor = 0x1458, .first_card_device = 0x5001, .second_vendor = 0x10ec, .second_device = 0x8139, .second_card_vendor = 0x1458, .second_card_device = 0xe000, .lb_vendor = NULL, .lb_part = NULL, .name = "GIGABYTE GA-7VT600", .enable = board_biostar_p4m80_m4, }, { .first_vendor = 0x1106, .first_device = 0x3149, .first_card_vendor = 0x1462, .first_card_device = 0x7094, .second_vendor = 0x10ec, .second_device = 0x8167, .second_card_vendor = 0x1462, .second_card_device = 0x094c, .lb_vendor = NULL, .lb_part = NULL, .name = "MSI K8T Neo2", .enable = w83627thf_gpio4_4_raise_2e, }, { .first_vendor = 0, .first_device = 0, .first_card_vendor = 0, .first_card_device = 0, .second_vendor = 0, .second_device = 0, .second_card_vendor = 0, .second_card_device = 0, .lb_vendor = NULL, .lb_part = NULL, } /* Keep this */ }; void print_supported_boards(void) { int i; printf("\nSupported mainboards (this list is not exhaustive!):\n\n"); for (i = 0; board_pciid_enables[i].name != NULL; i++) { if (board_pciid_enables[i].lb_vendor != NULL) { printf("%s (-m %s:%s)\n", board_pciid_enables[i].name, board_pciid_enables[i].lb_vendor, board_pciid_enables[i].lb_part); } else { printf("%s (autodetected)\n", board_pciid_enables[i].name); } } printf("\nSee also: http://coreboot.org/Flashrom\n"); } /** * Match boards on coreboot table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ static struct board_pciid_enable *board_match_coreboot_name(const char *vendor, const char *part) { struct board_pciid_enable *board = board_pciid_enables; struct board_pciid_enable *partmatch = NULL; for (; board->name; board++) { if (vendor && (!board->lb_vendor || strcasecmp(board->lb_vendor, vendor))) continue; if (!board->lb_part || strcasecmp(board->lb_part, part)) continue; if (!pci_dev_find(board->first_vendor, board->first_device)) continue; if (board->second_vendor && !pci_dev_find(board->second_vendor, board->second_device)) continue; if (vendor) return board; if (partmatch) { /* a second entry has a matching part name */ printf("AMBIGUOUS BOARD NAME: %s\n", part); printf("At least vendors '%s' and '%s' match.\n", partmatch->lb_vendor, board->lb_vendor); printf("Please use the full -m vendor:part syntax.\n"); return NULL; } partmatch = board; } if (partmatch) return partmatch; printf("\nUnknown vendor:board from coreboot table or -m option: %s:%s\n\n", vendor, part); return NULL; } /** * Match boards on PCI IDs and subsystem IDs. * Second set of IDs can be main only or missing completely. */ static struct board_pciid_enable *board_match_pci_card_ids(void) { struct board_pciid_enable *board = board_pciid_enables; for (; board->name; board++) { if (!board->first_card_vendor || !board->first_card_device) continue; if (!pci_card_find(board->first_vendor, board->first_device, board->first_card_vendor, board->first_card_device)) continue; if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, board->second_device, board->second_card_vendor, board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, board->second_device)) continue; } } return board; } return NULL; } int board_flash_enable(const char *vendor, const char *part) { struct board_pciid_enable *board = NULL; int ret = 0; if (part) board = board_match_coreboot_name(vendor, part); if (!board) board = board_match_pci_card_ids(); if (board) { printf("Found board \"%s\", enabling flash write... ", board->name); ret = board->enable(board->name); if (ret) printf("FAILED!\n"); else printf("OK.\n"); } return ret; }