/* * This file is part of the flashrom project. * * Copyright (C) 2005-2007 coresystems GmbH * Copyright (C) 2006 Uwe Hermann * Copyright (C) 2007-2008 Luc Verhaegen * Copyright (C) 2007 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ /* * Contains the board specific flash enables. */ #include #include #include #include #include "flash.h" /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ /* Enter extended functions */ static void w836xx_ext_enter(uint16_t port) { outb(0x87, port); outb(0x87, port); } /* Leave extended functions */ static void w836xx_ext_leave(uint16_t port) { outb(0xAA, port); } /* General functions for reading/writing Winbond Super I/Os. */ static unsigned char wbsio_read(uint16_t index, uint8_t reg) { outb(reg, index); return inb(index + 1); } static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { outb(reg, index); outb(data, index + 1); } static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { uint8_t tmp; outb(reg, index); tmp = inb(index + 1) & ~mask; outb(tmp | (data & mask), index + 1); } /** * Winbond W83627HF: Raise GPIO24. * * Suited for: * - Agami Aruma * - IWILL DK8-HTX */ static int w83627hf_gpio24_raise(uint16_t index, const char *name) { w836xx_ext_enter(index); /* Is this the W83627HF? */ if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID reg. */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", name, wbsio_read(index, 0x20)); w836xx_ext_leave(index); return -1; } /* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ wbsio_mask(index, 0x2B, 0x10, 0x10); /* Select logical device 8: GPIO port 2 */ wbsio_write(index, 0x07, 0x08); wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */ wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */ wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */ w836xx_ext_leave(index); return 0; } static int w83627hf_gpio24_raise_2e(const char *name) { /* TODO: Typo? Shouldn't this be 0x2e? */ return w83627hf_gpio24_raise(0x2d, name); } /** * Winbond W83627THF: GPIO 4, bit 4 * * Suited for: * - MSI K8N-NEO3 */ static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) { w836xx_ext_enter(index); /* Is this the W83627THF? */ if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID reg. */ fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", name, wbsio_read(index, 0x20)); w836xx_ext_leave(index); return -1; } /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ wbsio_write(index, 0x07, 0x09); /* Select LDN 9: GPIO port 4 */ wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ w836xx_ext_leave(index); return 0; } static int w83627thf_gpio4_4_raise_4e(const char *name) { return w83627thf_gpio4_4_raise(0x4e, name); } /** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this when using coreboot, GPIO15 is never lowered there. */ static int board_via_epia_m(const char *name) { struct pci_dev *dev; uint16_t base; uint8_t val; dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT8235 ISA bridge not found.\n"); return -1; } /* GPIO12-15 -> output */ val = pci_read_byte(dev, 0xE4); val |= 0x10; pci_write_byte(dev, 0xE4, val); /* Get Power Management IO address. */ base = pci_read_word(dev, 0x88) & 0xFF80; /* Enable GPIO15 which is connected to write protect. */ val = inb(base + 0x4D); val |= 0x80; outb(val, base + 0x4D); return 0; } /** * Suited for: * - ASUS A7V8X-MX SE and A7V400-MX: AMD K7 + VIA KM400A + VT8235 * - Tyan Tomcat K7M: AMD Geode NX + VIA KM400 + VT8237. */ static int board_asus_a7v8x_mx(const char *name) { struct pci_dev *dev; uint8_t val; dev = pci_dev_find(0x1106, 0x3177); /* VT8235 ISA bridge */ if (!dev) dev = pci_dev_find(0x1106, 0x3227); /* VT8237 ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT823x ISA bridge not found.\n"); return -1; } /* This bit is marked reserved actually. */ val = pci_read_byte(dev, 0x59); val &= 0x7F; pci_write_byte(dev, 0x59, val); /* Raise ROM MEMW# line on Winbond W83697 Super I/O. */ w836xx_ext_enter(0x2E); if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* Flash ROM enabled? */ wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* Enable MEMW#. */ w836xx_ext_leave(0x2E); return 0; } /** * Suited for VIAs EPIA SP. */ static int board_via_epia_sp(const char *name) { struct pci_dev *dev; uint8_t val; dev = pci_dev_find(0x1106, 0x3227); /* VT8237R ISA bridge */ if (!dev) { fprintf(stderr, "\nERROR: VT8237R ISA bridge not found.\n"); return -1; } /* All memory cycles, not just ROM ones, go to LPC */ val = pci_read_byte(dev, 0x59); val &= ~0x80; pci_write_byte(dev, 0x59, val); return 0; } /** * Suited for ASUS P5A. * * This is rather nasty code, but there's no way to do this cleanly. * We're basically talking to some unknown device on SMBus, my guess * is that it is the Winbond W83781D that lives near the DIP BIOS. */ static int board_asus_p5a(const char *name) { uint8_t tmp; int i; #define ASUSP5A_LOOP 5000 outb(0x00, 0xE807); outb(0xEF, 0xE803); outb(0xFF, 0xE800); for (i = 0; i < ASUSP5A_LOOP; i++) { outb(0xE1, 0xFF); if (inb(0xE800) & 0x04) break; } if (i == ASUSP5A_LOOP) { printf("%s: Unable to contact device.\n", name); return -1; } outb(0x20, 0xE801); outb(0x20, 0xE1); outb(0xFF, 0xE802); for (i = 0; i < ASUSP5A_LOOP; i++) { tmp = inb(0xE800); if (tmp & 0x70) break; } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { printf("%s: failed to read device.\n", name); return -1; } tmp = inb(0xE804); tmp &= ~0x02; outb(0x00, 0xE807); outb(0xEE, 0xE803); outb(tmp, 0xE804); outb(0xFF, 0xE800); outb(0xE1, 0xFF); outb(0x20, 0xE801); outb(0x20, 0xE1); outb(0xFF, 0xE802); for (i = 0; i < ASUSP5A_LOOP; i++) { tmp = inb(0xE800); if (tmp & 0x70) break; } if ((i == ASUSP5A_LOOP) || !(tmp & 0x10)) { printf("%s: failed to write to device.\n", name); return -1; } return 0; } static int board_ibm_x3455(const char *name) { uint8_t byte; /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ outb(0x45, 0xcd6); byte = inb(0xcd7); outb(byte | 0x20, 0xcd7); return 0; } /** * Suited for EPoX EP-BX3, and maybe some other Intel 440BX based boards. */ static int board_epox_ep_bx3(const char *name) { uint8_t tmp; /* Raise GPIO22. */ tmp = inb(0x4036); outb(tmp, 0xEB); tmp |= 0x40; outb(tmp, 0x4036); outb(tmp, 0xEB); return 0; } /** * Suited for Acorp 6A815EPD. */ static int board_acorp_6a815epd(const char *name) { struct pci_dev *dev; uint16_t port; uint8_t val; dev = pci_dev_find(0x8086, 0x2440); /* Intel ICH2 LPC */ if (!dev) { fprintf(stderr, "\nERROR: ICH2 LPC bridge not found.\n"); return -1; } /* Use GPIOBASE register to find where the GPIO is mapped. */ port = (pci_read_word(dev, 0x58) & 0xFFC0) + 0xE; val = inb(port); val |= 0x80; /* Top Block Lock -- pin 8 of PLCC32 */ val |= 0x40; /* Lower Blocks Lock -- pin 7 of PLCC32 */ outb(val, port); return 0; } /** * We use 2 sets of IDs here, you're free to choose which is which. This * is to provide a very high degree of certainty when matching a board on * the basis of subsystem/card IDs. As not every vendor handles * subsystem/card IDs in a sane manner. * * Keep the second set NULLed if it should be ignored. */ struct board_pciid_enable { /* Any device, but make it sensible, like the ISA bridge. */ uint16_t first_vendor; uint16_t first_device; uint16_t first_card_vendor; uint16_t first_card_device; /* Any device, but make it sensible, like * the host bridge. May be NULL. */ uint16_t second_vendor; uint16_t second_device; uint16_t second_card_vendor; uint16_t second_card_device; /* The vendor / part name from the coreboot table. */ const char *lb_vendor; const char *lb_part; const char *name; int (*enable) (const char *name); }; struct board_pciid_enable board_pciid_enables[] = { {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI-S4", it87xx_probe_spi_flash}, {0x10de, 0x03e0, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m61p", "GIGABYTE GA-M61P-S3", it87xx_probe_spi_flash}, {0x1039, 0x0761, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "2761gxdk", "GIGABYTE GA-2761GXDK", it87xx_probe_spi_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e}, {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000, "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, "ASUS A7V8-MX SE", board_asus_a7v8x_mx}, {0x1106, 0x3227, 0x1106, 0xAA01, 0x1106, 0x0259, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA SP", board_via_epia_sp}, {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, NULL, "Tyan Tomcat K7M", board_asus_a7v8x_mx}, {0x10B9, 0x1541, 0x0000, 0x0000, 0x10B9, 0x1533, 0x0000, 0x0000, "asus", "p5a", "ASUS P5A", board_asus_p5a}, {0x1166, 0x0205, 0x1014, 0x0347, 0x0000, 0x0000, 0x0000, 0x0000, "ibm", "x3455", "IBM x3455", board_ibm_x3455}, {0x8086, 0x7110, 0x0000, 0x0000, 0x8086, 0x7190, 0x0000, 0x0000, "epox", "ep-bx3", "EPoX EP-BX3", board_epox_ep_bx3}, {0x8086, 0x1130, 0x0000, 0x0000, 0x105a, 0x0d30, 0x105a, 0x4d33, "acorp", "6a815epd", "Acorp 6A815EPD", board_acorp_6a815epd}, {0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL} /* Keep this */ }; /** * Match boards on coreboot table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ static struct board_pciid_enable *board_match_coreboot_name(const char *vendor, const char *part) { struct board_pciid_enable *board = board_pciid_enables; struct board_pciid_enable *partmatch = NULL; for (; board->name; board++) { if (vendor && (!board->lb_vendor || strcmp(board->lb_vendor, vendor))) continue; if (!board->lb_part || strcmp(board->lb_part, part)) continue; if (!pci_dev_find(board->first_vendor, board->first_device)) continue; if (board->second_vendor && !pci_dev_find(board->second_vendor, board->second_device)) continue; if (vendor) return board; if (partmatch) { /* a second entry has a matching part name */ printf("AMBIGUOUS BOARD NAME: %s\n", part); printf("At least vendors '%s' and '%s' match.\n", partmatch->lb_vendor, board->lb_vendor); printf("Please use the full -m vendor:part syntax.\n"); return NULL; } partmatch = board; } if (partmatch) return partmatch; printf("NOT FOUND %s:%s\n", vendor, part); return NULL; } /** * Match boards on PCI IDs and subsystem IDs. * Second set of IDs can be main only or missing completely. */ static struct board_pciid_enable *board_match_pci_card_ids(void) { struct board_pciid_enable *board = board_pciid_enables; for (; board->name; board++) { if (!board->first_card_vendor || !board->first_card_device) continue; if (!pci_card_find(board->first_vendor, board->first_device, board->first_card_vendor, board->first_card_device)) continue; if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, board->second_device, board->second_card_vendor, board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, board->second_device)) continue; } } return board; } return NULL; } int board_flash_enable(const char *vendor, const char *part) { struct board_pciid_enable *board = NULL; int ret = 0; if (part) board = board_match_coreboot_name(vendor, part); if (!board) board = board_match_pci_card_ids(); if (board) { printf("Found board \"%s\": enabling flash write... ", board->name); ret = board->enable(board->name); if (ret) printf("FAILED!\n"); else printf("OK.\n"); } return ret; }