/* * This file is part of the flashrom project. * * Copyright (C) 2009, 2010 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include "flash.h" #include "programmer.h" #include "spi.h" /* Note that CS# is active low, so val=0 means the chip is active. */ static void bitbang_spi_set_cs(const const struct bitbang_spi_master *master, int val) { master->set_cs(val); } static void bitbang_spi_set_sck(const const struct bitbang_spi_master *master, int val) { master->set_sck(val); } static void bitbang_spi_set_mosi(const const struct bitbang_spi_master *master, int val) { master->set_mosi(val); } static int bitbang_spi_get_miso(const const struct bitbang_spi_master *master) { return master->get_miso(); } static void bitbang_spi_request_bus(const const struct bitbang_spi_master *master) { if (master->request_bus) master->request_bus(); } static void bitbang_spi_release_bus(const const struct bitbang_spi_master *master) { if (master->release_bus) master->release_bus(); } static int bitbang_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); static const struct spi_programmer spi_programmer_bitbang = { .type = SPI_CONTROLLER_BITBANG, .max_data_read = MAX_DATA_READ_UNLIMITED, .max_data_write = MAX_DATA_WRITE_UNLIMITED, .command = bitbang_spi_send_command, .multicommand = default_spi_send_multicommand, .read = default_spi_read, .write_256 = default_spi_write_256, .write_aai = default_spi_write_aai, }; #if 0 // until it is needed static int bitbang_spi_shutdown(const struct bitbang_spi_master *master) { /* FIXME: Run bitbang_spi_release_bus here or per command? */ return 0; } #endif int bitbang_spi_init(const struct bitbang_spi_master *master) { struct spi_programmer pgm = spi_programmer_bitbang; /* BITBANG_SPI_INVALID is 0, so if someone forgot to initialize ->type, * we catch it here. Same goes for missing initialization of bitbanging * functions. */ if (!master || master->type == BITBANG_SPI_INVALID || !master->set_cs || !master->set_sck || !master->set_mosi || !master->get_miso || (master->request_bus && !master->release_bus) || (!master->request_bus && master->release_bus)) { msg_perr("Incomplete SPI bitbang master setting!\n" "Please report a bug at flashrom@flashrom.org\n"); return ERROR_FLASHROM_BUG; } pgm.data = master; register_spi_programmer(&pgm); /* Only mess with the bus if we're sure nobody else uses it. */ bitbang_spi_request_bus(master); bitbang_spi_set_cs(master, 1); bitbang_spi_set_sck(master, 0); bitbang_spi_set_mosi(master, 0); /* FIXME: Release SPI bus here and request it again for each command or * don't release it now and only release it on programmer shutdown? */ bitbang_spi_release_bus(master); return 0; } static uint8_t bitbang_spi_rw_byte(const struct bitbang_spi_master *master, uint8_t val) { uint8_t ret = 0; int i; for (i = 7; i >= 0; i--) { bitbang_spi_set_mosi(master, (val >> i) & 1); programmer_delay(master->half_period); bitbang_spi_set_sck(master, 1); ret <<= 1; ret |= bitbang_spi_get_miso(master); programmer_delay(master->half_period); bitbang_spi_set_sck(master, 0); } return ret; } static int bitbang_spi_send_command(struct flashctx *flash, unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int i; const struct bitbang_spi_master *master = flash->pgm->spi.data; /* FIXME: Run bitbang_spi_request_bus here or in programmer init? * Requesting and releasing the SPI bus is handled in here to allow the * programmer to use its own SPI engine for native accesses. */ bitbang_spi_request_bus(master); bitbang_spi_set_cs(master, 0); for (i = 0; i < writecnt; i++) bitbang_spi_rw_byte(master, writearr[i]); for (i = 0; i < readcnt; i++) readarr[i] = bitbang_spi_rw_byte(master, 0); programmer_delay(master->half_period); bitbang_spi_set_cs(master, 1); programmer_delay(master->half_period); /* FIXME: Run bitbang_spi_release_bus here or in programmer init? */ bitbang_spi_release_bus(master); return 0; }