From 6529b9fdc2340d7cfee198eea77f38424acaef86 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=B6rg=20Fischer?= Date: Thu, 29 Jul 2010 15:54:53 +0000 Subject: Add support for the Amontec JTAGkey2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for the Amontec JTAGkey2, see http://www.amontec.com/jtagkey2.shtml http://www.amontec.com/jtagkey.shtml. This FTDI 2232H variant has an additional output enable, which will be set to its "on" (L) when CS is pulled low. But it lacks a power supply and you need an external 3.3V source. The attached patch adds "jtagkey" as "type" parameter for ft2232_spi. It should work with all JTAGkeys (JTAGkey, JTAGkey-tiny and JTAGkey2) but I only have a JTAGkey2 here for testing. Add all FT2232H/FT4232H based programmers to the list printed with flashrom -L Corresponding to flashrom svn r1119. Signed-off-by: Jörg Fischer Acked-by: Carl-Daniel Hailfinger --- print.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'print.c') diff --git a/print.c b/print.c index 14aa489..5504880 100644 --- a/print.c +++ b/print.c @@ -255,6 +255,15 @@ void print_supported(void) #if CONFIG_ATAHPT == 1 print_supported_pcidevs(ata_hpt); #endif + +#if CONFIG_FT2232_SPI+CONFIG_DEDIPROG >= 1 + printf("\nSupported USB devices flashrom can use " + "as programmer:\n\n"); +#endif + +#if CONFIG_FT2232_SPI == 1 + print_supported_usbdevs(devs_ft2232spi); +#endif } #if CONFIG_INTERNAL == 1 -- cgit v1.1