From bc2bbd285168dc97a39e31ea9f5f49905b01c02c Mon Sep 17 00:00:00 2001 From: Maciej Pijanka Date: Tue, 2 Jun 2009 16:45:59 +0000 Subject: Add support for the 10b7:9058 3COM NIC (3C905B: Cyclone 10/100/BNC) Also, add Atmel AT29C512 support. Both are tested on hardware by Maciej Pijanka. Corresponding to flashrom svn r566. Signed-off-by: Maciej Pijanka Acked-by: Uwe Hermann --- nic3com.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'nic3com.c') diff --git a/nic3com.c b/nic3com.c index a68bd8c..0bebe92 100644 --- a/nic3com.c +++ b/nic3com.c @@ -46,6 +46,7 @@ struct pcidev_status nics_3com[] = { {0x10b7, 0x9006, PCI_NT, "3COM", "3C90xB: PCI 10BASE-T/10BASE2 (TPC)" }, {0x10b7, 0x900a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FL" }, {0x10b7, 0x905a, PCI_NT, "3COM", "3C90xB: PCI 10BASE-FX" }, + {0x10b7, 0x9058, PCI_NT, "3COM", "3C905B: Cyclone 10/100/BNC" }, /* 3C905C */ {0x10b7, 0x9200, PCI_OK, "3COM", "3C905C: EtherLink 10/100 PCI (TX)" }, @@ -65,7 +66,7 @@ int nic3com_init(void) /* 3COM 3C90xB cards need a special fixup. */ if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005 - || id == 0x9006 || id == 0x900a || id == 0x905a) { + || id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) { /* Select register window 3 and save the receiver status. */ OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS); internal_conf = INL(io_base_addr + INTERNAL_CONFIG); @@ -90,7 +91,7 @@ int nic3com_shutdown(void) { /* 3COM 3C90xB cards need a special fixup. */ if (id == 0x9055 || id == 0x9001 || id == 0x9004 || id == 0x9005 - || id == 0x9006 || id == 0x900a || id == 0x905a) { + || id == 0x9006 || id == 0x900a || id == 0x905a || id == 0x9058) { /* Select register window 3 and restore the receiver status. */ OUTW(SELECT_REG_WINDOW + 3, io_base_addr + INT_STATUS); OUTL(internal_conf, io_base_addr + INTERNAL_CONFIG); -- cgit v1.1