From 2f1b36fb35873c599442e1828756c1993524cd5e Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Sun, 12 Jul 2009 12:06:18 +0000 Subject: Convert SPI byte program to use the multicommand infrastructure Tested-by: Jakob Bornecrantz Corresponding to flashrom svn r651. Signed-off-by: Carl-Daniel Hailfinger Tested it on Epia-m700 worked okay. Acked-by: Jakob Bornecrantz --- it87spi.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'it87spi.c') diff --git a/it87spi.c b/it87spi.c index eae4978..d5f7a51 100644 --- a/it87spi.c +++ b/it87spi.c @@ -232,6 +232,7 @@ static int it8716f_spi_page_program(struct flashchip *flash, int block, uint8_t result = spi_write_enable(); if (result) return result; + /* FIXME: The command below seems to be redundant or wrong. */ OUTB(0x06, it8716f_flashport + 1); OUTB(((2 + (fast_spi ? 1 : 0)) << 4), it8716f_flashport); for (i = 0; i < 256; i++) { @@ -262,10 +263,7 @@ int it8716f_spi_chip_write_1(struct flashchip *flash, uint8_t *buf) spi_disable_blockprotect(); for (i = 0; i < total_size; i++) { - result = spi_write_enable(); - if (result) - return result; - spi_byte_program(i, buf[i]); + result = spi_byte_program(i, buf[i]); while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) programmer_delay(10); } -- cgit v1.1