From bb297f733dc78a22d6ee0eb37560207e0c2d424a Mon Sep 17 00:00:00 2001 From: Carl-Daniel Hailfinger Date: Sat, 11 Jul 2009 18:05:42 +0000 Subject: Add an optional flash port parameter for IT87* SPI controllers in standalone programmer mode If the parameter is set, the IT87* SPI driver will set the I/O base port of the IT87* SPI controller interface to the port specified in the parameter. Usage: flashrom -p it87spi=port=0x820 Corresponding to flashrom svn r646. Signed-off-by: Carl-Daniel Hailfinger Acked-by: Uwe Hermann --- flashrom.8 | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'flashrom.8') diff --git a/flashrom.8 b/flashrom.8 index cdc055f..70f505c 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -184,6 +184,14 @@ Currently the following programmers support this mechanism: .BR nic3com , .BR satasii . .sp +The it87spi has an optional parameter which will set the I/O base port of the +IT87* SPI controller interface to the port specified in the parameter. +For that you have to use the +.B "flashrom -p it87spi=port=portnum" +syntax where +.B portnum +is an I/O port number which must be a multiple of 8. +.sp The ft2232spi has an optional parameter specifying the controller type and interface/port it should support. For that you have to use the .B "flashrom -p ft2232spi=model,port=interface" -- cgit v1.1