From 4e3d0b3a244067debc0c250986bf65bc2bc182ea Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Thu, 25 Mar 2010 23:18:41 +0000 Subject: Polish the flashrom code comments and outputs a bit - Fix a number of typos (found via ispell). - Use correct vendor names (as per their websites) consistently. Corresponding to flashrom svn r985. Signed-off-by: Uwe Hermann Acked-by: Uwe Hermann --- flashrom.8 | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'flashrom.8') diff --git a/flashrom.8 b/flashrom.8 index 6306b95..47e77d6 100644 --- a/flashrom.8 +++ b/flashrom.8 @@ -174,7 +174,7 @@ Show a help text and exit. Show version information and exit. .SH PROGRAMMER SPECIFIC INFO Some programmer drivers accept further parameters to set programmer-specific -parameters. These parameters are seperated from the programmer name by a +parameters. These parameters are separated from the programmer name by a colon. While some programmers take arguments at fixed positions, other programmers use a key/value interface in which the key and value is separated by an equal sign and different pairs are separated by a comma or a colon. @@ -298,8 +298,8 @@ instead. More information about serprog is available in serprog-protocol.txt in the source distribution. .TP .BR "buspiratespi " programmer -A required dev parameter specifyies the Bus Pirate device node and an optional -spispeed parameter specifyies the frequency of the SPI bus. The parameter +A required dev parameter specifies the Bus Pirate device node and an optional +spispeed parameter specifies the frequency of the SPI bus. The parameter delimiter is a comma. Syntax is .sp .B "flashrom -p buspiratespi:dev=/dev/device,spispeed=frequency" -- cgit v1.1